Design and Application of pH-Responsive Liposomes for Site-Specific Delivery of Cytotoxin from Cobra Venom.

Background: Current immunotherapies with unexpected severe side effects and treatment resistance have not resulted in the desired outcomes for patients with melanoma, and there is a need to discover more effective medications. Cytotoxin (CTX) from Cobra Venom has been established to have favorable cytolytic activity and antitumor efficacy and is regarded as a promising novel anticancer agent. However, amphiphilic CTX with excellent anionic phosphatidylserine lipid-binding ability may also damage normal cells. Methods: We developed pH-responsive liposomes with a high CTX load (CTX@PSL) for targeted acidic-stimuli release of drugs in the tumor microenvironment. The morphology, size, zeta potential, drug-release kinetics, and preservation stability were characterized. Cell uptake, apoptosis-promoting effects, and cytotoxicity were assessed using MTT assay and flow cytometry. Finally, the tissue distribution and antitumor effects of CTX@PSL were systematically assessed using an in vivo imaging system. Results: CTX@PSL exhibited high drug entrapment efficiency, drug loading, stability, and a rapid release profile under acidic conditions. These nanoparticles, irregularly spherical in shape and small in size, can effectively accumulate at tumor sites (six times higher than free CTX) and are rapidly internalized into cancer cells (2.5-fold higher cell uptake efficiency). CTX@PSL displayed significantly stronger cytotoxicity (IC50 0.25 µg/mL) and increased apoptosis in than the other formulations (apoptosis rate 71.78±1.70%). CTX@PSL showed considerably better tumor inhibition efficacy than free CTX or conventional liposomes (tumor inhibition rate 79.78±5.93%). Conclusion: Our results suggest that CTX@PSL improves tumor-site accumulation and intracellular uptake for sustained and targeted CTX release. By combining the advantages of CTX and stimuli-responsive nanotechnology, the novel CTX@PSL nanoformulation is a promising therapeutic candidate for cancer treatment.

Sensitive electrochemical immunoassay of metallothionein-3 based on K3[Fe(CN)6] as a redox-active signal and C-dots/Nafion film for antibody immobilization.

The fabrication of a facile, sensitive, and versatile immunosensor for the quantification of metallothionein-3 (MT-3) is proposed in this work. The K3[Fe(CN)6]-chitosan-glutaraldehyde (K-CS-GA) conjugate prepared from K3[Fe(CN)6], chitosan and glutaraldehyde was employed as the redox-active signal source. Carbon nanodots (C-dots) were coupled with Nafion to form the nanocomposite architecture layer to carry antibodies (Abs). C-dots enhanced the electrochemical response of the proposed immunosensor to improve the detection sensitivity. The fabrication steps of the immunosensor were characterized using differential pulse voltammetry (DPV) and cyclic voltammetry (CV). Antigen determination was achieved via the decreased current response of the K3[Fe(CN)6] caused by the insulated coupled antigen. The detected signals were proportional to the logarithm of the concentrations of MT-3 ranging from 5 pg mL(-1) to 20 ng mL(-1) with a detection limit of 2.5 pg mL(-1) in PBS. The proposed immunosensor showed high sensitivity, good selectivity and reproducibility. Furthermore, detection results using real serum samples showed the immunosensor's potential applications in clinical diagnostics.

Electrochemical monitoring the effect of drug intervention on PC12 cell damage model cultured on paper-PLA 3D printed device.

Three-dimensional (3D) cell culture system, as an alternative approach for traditional cell culture, attracts great attention because of physiological relevance and great microenvironment similarity to human conditions. Herein, a facile paper-polylactic (PLA) platform that was fabricated by wax printing and 3D printing, coupled with electrochemical sensor, was designed for the construction and intervention of 3D cell damage model. Pheochromocytoma cells (PC12) and bone marrow mesenchymal stem cells (BMSCs) were seeded on the paper-PLA 3D platforms and displayed the features of uniform distribution, good adhesion and perfect proliferation, as well as decreased circularity when compared to those grown on the two-dimensional (2D) interfaces. The electrochemical sensors revealed cell viability by monitoring dopamine released by cell models, ascertaining the applicability of the paper-PLA platform to a long-term 3D cell culture and drug assessment. Additionally, the results revealed that donepezil and BMSCs-secreted active molecules exhibited stronger cytoprotective effect against amyloid-beta oligomers-induced cell damage on the paper-PLA 3D printed platforms, indicating the cell damage model and the cell intervention model were achieved successfully in the simulated in vivo physiological microenvironment. Thus, the proposed paper-PLA platform may serve as a promising candidate for efficient drug screening and toxicity evaluation due to its simple structure, low cost, and convenient integration of 3D cell culture and activity evaluation.

The PLGA nanoparticles for sustainable release of CGRP to ameliorate the inflammatory and vascular disorders in the lung of CGRP-deficient rats.

The calcitonin gene-related peptide (CGRP) has been demonstrated relating to vascular and inflammatory regulations not only the nerve systems. As the anti-inflammation factor and the most potent vasodilator, the CGRP holds therapeutic potentials for the treatment of cardiovascular diseases which was, however, limited by its peptide nature and short half-life. With advantages in improving the stability, circulation time and protection from degradation, the nanoparticles were promising as delivery carriers for the peptide. Nevertheless, few nanoparticulate systems were developed to deliver the CGRP peptide for the modulation of vascular or inflammatory functions instead of neural regulation. In this study, the CGRP was encapsulated into the poly (lactic-co-glycolic acid) (PLGA) nanoparticle for sustained release of CGRP in vivo. The nanoparticles recovered the systemic level of CGRP and the vascular inflammatory factors in the CGRP+/- rats comparing to the administration of (Dulbecco's Phosphate Buffered Saline) DPBS or peptide only. With the decrease of vascular wall thickness and the attenuation of the T cell infiltration in the lung, the polymer based CGRP delivery system showed potentials to facilitate the therapeutic effects of the CGRP which may help for the development of CGRP-based therapy in vascular and inflammatory disorder related diseases.

Facile surface functional polyetheretherketone with antibacterial and immunoregulatory activities for enhanced regeneration toward bacterium-infected bone destruction.

Existing biologically inert or unmodified implants to treat infectious bone defects or osteomyelitis still cannot effectively solve bacterial infection and osseointegration. In this work, a simple co-deposition strategy was developed to modify porous polyetheretherketone (PEEK) with improved antibacterial activity and controllable immunoregulatory ability. After PEEK was treated by H2SO4 to obtain porous PEEK (SPEEK), the self-polymerization of dopamine was operated on SPEEK in the solution of dopamine and gentamicin sulfate (GS) to prepare polydopamine (pDA) and GS layer-modified SPEEK (labeled as SPEEK-pDA-GS). The morphology, surface property, and molecular structure of SPEEK-pDA-GS were investigated. Besides the antibacterial property of SPEEK-pDA-GS ascribed to the successful immobilization of GS, SPEEK-pDA-GS exhibited promoted osseointegration through the results of mineralization, alkaline phosphatase (ALP) levels and osteogenic gene expression. Furthermore, the evaluation of the cell proliferation suggested that SPEEK-pDA-GS possessed the biocompatibility and the immunoregulatory ability that induced macrophages to anti-inflammatory M2 phenotype. Using rat as model, in vivo results containing X-ray, µ-CT, immunohistochemistry, and pathological analysis showed the excellent healing effect of SPEEK-pDA-GS on bone defect with infection with biological safety. This work illustrates a new insight into the simple and effective modification of PEEK and other implants with antibacterial, immunoregulatory, and osseointegration abilities for clinical requirement.

Integration of fluorescent polydopamine nanoparticles on protamine for simple and sensitive trypsin assay.

As an important protease, trypsin (TRY) has been identified as a key indicator of various diseases. A simple and sensitive strategy for TRY detection by using an environment-friendly biosafe probe is significant. Herein, we introduced negatively charged fluorescent polydopamine nanoparticles (PDNPs) with 4.8 nm diameter obtained through a controllable method as an effective probe for TRY. PDNPs exhibited excellent fluorescence property but integrated with protamine (Pro) to form an aggregation-caused quenching system via a static quenching mechanism. The quenching mechanism of Pro to PDNPs revealed the significant effect of the surface charge, functional groups, and appropriate size of PDNPs on quenching process. Given the specific hydrolysis of Pro by TRY, PDNPs were released from the quenching integration of PDNPs and Pro (PDNPs-Pro) and recovered their fluorescence. Thus, a fluorescence sensor for TRY with a linear range of 0.01 and 0.1 µg/mL and a detection limit of 6.7 ng/mL was developed without the disturbing from other proteases. Compared with other TRY assays, the biosensor based on PDNPs-Pro has the advantages of simple operation, environmental friendliness, and high sensitivity. This specific controlled-synthesis PDNPs would open up a new window for the extended application of fluorescent nanomaterials in biomedicine based on fluorescence changes induced by biological interaction.

SIRT2-knockdown rescues GARS-induced Charcot-Marie-Tooth neuropathy.

Charcot-Marie-Tooth disease is the most common inherited peripheral neuropathy. Dominant mutations in the glycyl-tRNA synthetase (GARS) gene cause peripheral nerve degeneration and lead to CMT disease type 2D. The underlying mechanisms of mutations in GARS (GARSCMT2D ) in disease pathogenesis are not fully understood. In this study, we report that wild-type GARS binds the NAD+ -dependent deacetylase SIRT2 and inhibits its deacetylation activity, resulting in the acetylated α-tubulin, the major substrate of SIRT2. The catalytic domain of GARS tightly interacts with SIRT2, which is the most CMT2D mutation localization. However, CMT2D mutations in GARS cannot inhibit SIRT2 deacetylation, which leads to a decrease of acetylated α-tubulin. Genetic reduction of SIRT2 in the Drosophila model rescues the GARS-induced axonal CMT neuropathy and extends the life span. Our findings demonstrate the pathogenic role of SIRT2-dependent α-tubulin deacetylation in mutant GARS-induced neuropathies and provide new perspectives for targeting SIRT2 as a potential therapy against hereditary axonopathies.

Simultaneous voltammetric determination of ascorbic acid, dopamine and uric acid using polybromothymol blue film-modified glassy carbon electrode.

A sensitive and selective electrochemical method for simultaneous determination of ascorbic acid (AA), dopamine (DA), and uric acid (UA) using an electropolymerized bromothymol blue (BTB)-modified glassy carbon electrode (GCE) was developed. The electrochemically synthesized film was investigated using electrochemical impedance spectroscopy and voltammetric methods. The electrochemical behavior of the polymer-modified electrode depends on film thickness, i.e., the electropolymyerization time. The poly-BTB-modified GCE shows excellent electrocatalytic activity toward the oxidation of AA, DA, and UA in phosphate buffer solution (pH 5.0). The voltametric peak separations of AA/DA, DA/UA, and AA/UA on this modified electrode are 118 mV, 298 mV, and 455 mV, respectively. Therefore the voltammetric responses of these three compounds can be resolved well on the polymer-modified electrode, and simultaneous determination of these three compounds can be achieved. In addition, this modified electrode can be successfully applied to determine AA and DA in injection and UA in urine samples without interference.

Rapid construction of polyetheretherketone (PEEK) biological implants incorporated with brushite (CaHPO4·2H2O) and antibiotics for anti-infection and enhanced osseointegration.

Polyetheretherketone (PEEK) is an ideal implant material for orthopedic and dental application due to its high biocompatibility and mechanical property. However, biological inertness of PEEK hinders the effective clinical applications in treating bone defect, especially in the situation accompanied by bacterial infection. In this study, a layer-by-layer (LBL) deposition method with controlled cycles was developed to rapidly construct brushite (CaHPO4·2H2O) (CaP) layers containing gentamicin sulfate (GS) on PEEK to obtain CaP-and-GS modified PEEK, named as PEEK/CaP-GS. Different PEEK/CaP-GS, like PEEK/CaP-GS*3, PEEK/CaP-GS*6 and PEEK/CaP-GS*9 were conveniently prepared by repeating the LBL cycles to 3, 6 and 9 times, respectively. The morphology, structure and surface property of the fabricated PEEK/CaP-GS were carefully characterized. In vitro antibacterial experiments illustrated that all of the PEEK/CaP-GS samples had excellent and sustained antibacterial property. Cell proliferation experiments revealed the acceptable biocompatibility and cell osteogenic differentiation of PEEK/CaP-GS, especially in PEEK/CaP-GS*6. X-ray, µ-CT, and histological analysis showed that PEEK/CaP-GS exhibited in vivo antibacterial activity and osseointegration ability in the treatment of bone defect with infection. In both the in vitro and the in vivo experiments, PEEK/CaP-GS*6 prepared from the 6 LBL cycles exhibited the best antibacterial and osseointegration ability for bone healing. This work opens new avenue of the facile and effective modification of PEEK with special biological functions for clinical application, especially for the implants requiring excellent antibacterial and osseointegration ability.

Improved solubility, dissolution rate, and oral bioavailability of main biflavonoids from Selaginella doederleinii extract by amorphous solid dispersion.

Amentoflavone, robustaflavone, 2″,3″-dihydro-3',3‴-biapigenin, 3',3‴-binaringenin, and delicaflavone are five major hydrophobic components in the total biflavonoids extract from Selaginella doederleinii (TBESD) that display favorable anticancer properties. The purpose of this study was to develop a new oral delivery formulation to improve the solubilities, dissolution rates, and oral bioavailabilities of the main ingredients in TBESD by the solid dispersion technique. Solid dispersions of TBESD with various hydrophilic polymers were prepared, and different technologies were applied to select the suitable carrier and method. TBESD amorphous solid dispersion (TBESD-ASD) with polyvinylpyrrolidone K-30 was successfully prepared by the solvent evaporation method. The physicochemical properties of TBESD-ASD were investigated by scanning electron microscopy, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. As a result, TBESD was found to be molecularly dispersed in the amorphous carrier. The solubilities and dissolution rates of all five ingredients in the TBESD-ASD were significantly increased (nearly 100% release), compared with raw TBESD. Meanwhile, TBESD-ASD showed good preservation stability for 3 months under accelerated conditions of 40 °C and 75% relative humidity. A subsequent pharmacokinetic study in rats revealed that Cmax and AUC0-t of all five components were significantly increased by the solid dispersion preparation. An in vivo study clearly revealed that compared to raw TBESD, a significant reduction in tumor size and microvascular density occurred after oral administration of TBESD-ASD to xenograft-bearing tumor mice. Collectively, the developed TBESD-ASD with the improved solubility, dissolution rates and oral bio-availabilities of the main ingredients could be a promising chemotherapeutic agent for cancer treatment.

Proliposomes for oral delivery of total biflavonoids extract from Selaginella doederleinii: formulation development, optimization, and in vitro-in vivo characterization.

PURPOSE: Amentoflavone, robustaflavone, 2'',3''-dihydro-3',3'''-biapigenin, 3',3'''-binaringenin and delicaflavone are five major active ingredients in the total biflavonoids extract from Selaginella doederleinii (TBESD) with favorable anticancer properties. However, the natural-derived potent antitumor agent of TBESD is undesirable due to its poor solubility. The present study was to develop and optimize a proliposomal formulation of TBESD (P-TBESD) to improve its solubility, oral bioavailability and efficacy. MATERIALS AND METHODS: P-TBESD containing a bile salt, a protective hydrophilic isomalto-oligosaccharides (IMOs) coating, were successfully prepared by thin film dispersion-sonication method. The physicochemical and pharmacokinetic properties of P-TBESD were characterized, and the antitumor effect was evaluated using the HT-29 xenograft-bearing mice models in rats. RESULTS: Compared with TBESD, the relative bioavailability of amentoflavone, robustaflavone, 2'',3''-dihydro-3',3'''-biapigenin, 3',3'''-binaringenin and delicaflavone from P-TBESD were 669%, 523%, 761%, 955% and 191%, respectively. The results of pharmacodynamics demonstrated that both TBESD and P-TBESD groups afforded antitumor effect without systemic toxicity, and the antitumor effect of P-TBESD was significantly superior to that of raw TBESD, based on the tumor growth inhibition and histopathological examination. CONCLUSION: Hence, IMOs-modified proliposomes have promising potential for TBESD solving the problem of its poor solubility and oral bioavailability, which can serve as a practical oral preparation for TBESD in the future cancer therapy.

Simultaneous voltammetric determination of norepinephrine, ascorbic acid and uric acid on polycalconcarboxylic acid modified glassy carbon electrode.

A novel polycalconcarboxylic acid (CCA) modified glassy carbon electrode (GCE) was fabricated by electropolymerization and then successfully used to simultaneously determine ascorbic acid (AA), norepinephrine (NE) and uric acid (UA). The characterization of electrochemically synthesized Poly-CCA film was investigated by atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and voltammetric methods. It was found that the electrochemical behavior of the polymer-modified electrode depended on film thickness, i.e., the electropylmyerization time. Based on the electrochemical data, the charge transfer coefficient (alpha) and the surface coverage (Gamma) were calculated. This poly-CCA modified GCE could reduce the overpotential of ascorbic acid (AA), norepinephrine (NE) and uric acid (UA) oxidation in phosphate buffer solution (pH 6.0), while it increases the peak current significantly. The current peak separations of AA/NE, NE/UA and AA/UA on this modified electrode are 91mV, 256mV and 390mV in CV at 100mVs(-1), respectively. Therefore, the voltammetric responses of these three compounds can be well resolved on the polymer-modified electrode, and simultaneously determination of these three compounds can be achieved. In addition, this modified electrode can be successfully applied to determine AA and NE in injection and UA in urine samples without interferences.

Selective determination of epinephrine in the presence of ascorbic acid and uric acid by electrocatalytic oxidation at poly(eriochrome black T) film-modified glassy carbon electrode.

An electropolymerized film of eriochrome black T (EBT) has been prepared at a glassy carbon electrode (GCE) by cyclic voltammetry (CV). The poly(EBT) membrane at GCE exhibits an excellent electrocatalytic activity towards the oxidation of epinephrine (EP), ascorbic acid (AA) and uric acid (UA) in acidic solution and reduced the overpotential for the oxidation of EP. The poly(EBT)-coated electrode could separately detect EP, AA and UA in their mixture with the potential differences of 180 and 160 mV for EP-AA and UA-EP, respectively, which are large enough to allow for determination of EP in the presence of AA and UA. Using differential pulse voltammetry, the peak current of EP recorded in pH 3.5 solution was linearly dependent on EP's concentration in the range of 2.5 - 50 microM. Due to its good selectivity and stability, the polymer-coated GCE was successfully applied to the determination of EP in real samples.

Augmentation of demineralized bone matrix (DBM) mineralization by a synthetic growth factor mimetic.

These studies evaluated whether F2A4-K-NS, a peptide mimetic of FGF-2, could augment ectopic bone production following the subcutaneous implant of human demineralized bone matrix (DBM). DBM was formulated into a gel with and without F2A4-K-NS, and injected subcutaneously into athymic rats. After 28 days the resultant tissue was excised and fixed. The tissue was examined with soft X-rays and microcomputerized tomography (micro-CT), and by histological methods. Inclusion of F2A4-K-NS with DBM resulted in an increased mineral deposition as determined by soft X-ray and micro-CT analysis and von Kossa staining. DBM-containing tissues showed extensive mineralization compared to the carrier alone, which was poorly mineralized. The mineralization was qualitatively and quantitatively the most extensive in the samples containing F2A4-K-NS plus DBM. Additionally, the highest amount of von Kossa staining for calcium was observed in tissues from animals that had received DBM plus F2A4-K-NS. In these studies, 100 ng of peptide per 0.2 mL of injectable DBM gel generated the most optimal results. The synthetic peptide F2A4-K-NS augmented DBM-induced ectopic mineralization in athymic animals.

A polymer film modified sensor for voltammetric determination of uric acid in the presence of ascorbic Acid and its application in urine.

A novel uric acid electrochemical sensor was fabricated by electropolymerization on glassy carbon electrode (GCE) with 4-(2-pyridylazo)-resorcinol (PAR) and its electrochemical property was investigated through cyclic voltammetry. The effect of film thickness on the oxidation response was also studied by electropolymerized scan times. The voltammetric behavior of uric acid (UA) was studied with the poly PAR modified GCE. The modified GCE was used to electrochemically detect the individual of UA and the mixture of UA and ascorbic acid (AA) by cyclic voltammetry (CV) or differential pulse voltammetry (DPV) method. For the ternary mixture containing UA and AA, the two compounds can well be separated from each other at a scan rate of 100 mV s(-1) with a potential difference of 345 mV in DPV between UA and AA. The peak currents of UA oxidation increase linearly with the concentration in ranges of 1.0x10(-8)-5.0x10(-5) mol l(-1), and the detection limits (S/N=3) was 1.0x10(-9) mol l(-1). This method was successfully applied to the determination of uric acid in human urine samples.