Oriented Antibody Coupling to an Antifouling Polymer Using Glycan Remodeling for Biosensing by Particle Motion.

Biosensors based on immobilized antibodies require molecular strategies that (i) couple the antibodies in a stable fashion while maintaining the conformation and functionality, (ii) give outward orientation of the paratope regions of the antibodies for good accessibility to analyte molecules in the biofluid, and (iii) surround the antibodies by antibiofouling molecules. Here, we demonstrate a method to achieve oriented coupling of antibodies to an antifouling poly(l-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG) substrate, using glycan remodeling to create antibody-DNA conjugates. The coupling, orientation, and functionality of the antibodies were studied using two analysis methods with single-molecule resolution, namely single-molecule localization microscopy and continuous biosensing by particle motion. The biosensing functionality of the glycan-remodeled antibodies was demonstrated in a sandwich immunosensor for procalcitonin. The results show that glycan-remodeled antibodies enable oriented immobilization and biosensing functionality with low nonspecific binding on antifouling polymer substrates.

Enhancing the production of recombinant adeno-associated virus in synthetic cell lines through systematic characterization.

Recombinant adeno-associated virus (rAAV) is among the most commonly used in vivo gene delivery vehicles and has seen a number of successes in clinical application. Current manufacturing processes of rAAV employ multiple plasmid transfection or rely on virus infection and face challenges in scale-up. A synthetic biology approach was taken to generate stable cell lines with integrated genetic modules, which produced rAAV upon induction albeit at a low productivity. To identify potential factors that restrained the productivity, we systematically characterized virus production kinetics through targeted quantitative proteomics and various physical assays of viral components. We demonstrated that reducing the excessive expression of gene of interest by its conditional expression greatly increased the productivity of these synthetic cell lines. Further enhancement was gained by optimizing induction profiles and alleviating proteasomal degradation of viral capsid protein by the addition of proteasome inhibitors. Altogether, these enhancements brought the productivity close to traditional multiple plasmid transfection. The rAAV produced had comparable full particle contents as those produced by conventional transient plasmid transfection. The present work exemplified the versatility of our synthetic biology-based viral vector production platform and its potential for plasmid- and virus-free rAAV manufacturing.

The immune landscape in apical periodontitis: From mechanism to therapy.

Apical periodontitis (AP) is featured by a persistent inflammatory response and alveolar bone resorption initiated by microorganisms, posing risks to both dental and systemic health. Nonsurgical endodontic treatment is the recommended treatment plan for AP with a high success rate, but in some cases, periapical lesions may persist despite standard endodontic treatment. Better comprehension of the AP inflammatory microenvironment can help develop adjunct therapies to improve the outcome of endodontic treatment. This review presents an overview of the immune landscape in AP, elucidating how microbial invasion triggers host immune activation and shapes the inflammatory microenvironment, ultimately impacting bone homeostasis. The destructive effect of excessive immune activation on periapical tissues is emphasized. This review aimed to systematically discuss the immunological basis of AP, the inflammatory bone resorption and the immune cell network in AP, thereby providing insights into potential immunotherapeutic strategies such as targeted therapy, antioxidant therapy, adoptive cell therapy and cytokine therapy to mitigate AP-associated tissue destruction.

IWP-2 modulates the immunomodulatory properties of human dental pulp stem cells in vitro.

AIM: To investigate the effect of IWP-2, Wnt inhibitor, on human dental pulp stem cells (hDPSCs) responses. METHODOLOGY: hDPSCs were isolated from human dental pulp tissues. Cells were treated with 25 µM IWP-2 for 24 h, and subsequently, the gene expression profile was examined using high-throughput RNA sequencing. The mRNA expression was analysed using qPCR. The effect of IWP-2 was investigated in both normal and LPS-induced hDPSCs (inflamed hDPSCs). CD4+ T cells and CD14+ monocyte-derived macrophages were cultured with conditioned media of IWP-2 treated hDPSCs to observe the immunosuppressive property. RESULTS: RNA sequencing indicated that IWP-2 significantly downregulated several KEGG pathways, including cytokine-cytokine receptor interaction, IL-17 signalling pathway, and TNF signalling pathway. In both normal and inflamed conditions, IWP-2 markedly upregulated TGFB1 mRNA expression while the mRNA expression of pro-inflammatory cytokines, TNFA, IL1B, IFNG, and IL6, was inhibited. In the inhibition experiment, the pretreatment with p38, MAPK, or PI3K inhibitors abolished the effects of IWP-2 in LPS-induced inflammation. In terms of immune cells, IWP-2-treated-inflamed hDPSCs conditioned media attenuated T cell proliferation and regulated regulatory T cell differentiation. In addition, the migratory property of macrophage was decreased after being exposed to IWP-2-treated inflamed hDPSCs conditioned media. CONCLUSION: IWP-2 suppressed inflammatory cytokine expression in both normal and inflamed hDPSCs. Moreover, hDPSCs exerted the immunosuppressive property after IWP-2 treatment. These results suggest the role of Wnt in inflammatory responses and immunomodulation in dental pulp tissues.

Fluoride exposure-induced gut microbiota alteration mediates colonic ferroptosis through N6-methyladenosine (m6A) mediated silencing of SLC7A11.

Fluoride exposure is widespread worldwide and poses a significant threat to organisms, particularly to their gastrointestinal tracts. However, due to limited knowledge of the mechanism of fluoride induced intestinal injury, it has been challenging to develop an effective treatment. To address this issue, we used a series of molecular biology in vitro and in vivo experiments. NaF triggered m6A mediated ferroptosis to cause intestinal damage. Mechanistically, NaF exposure increased the m6A level of SLC7A11 mRNA, promoted YTHDF2 binding to m6A-modified SLC7A11 mRNA, drove the degradation of SLC7A11 mRNA, and led to a decrease in its protein expression, which eventually triggers ferroptosis. Moreover, NaF aggravated ferroptosis of the colon after antibiotics destroyed the composition of gut microbiota. 16 S rRNA sequencing and SPEC-OCCU plots, Zi-Pi relationships, and Spearman correlation coefficients verified that Lactobacillus murinus (ASV54, ASV58, and ASV82) plays a key role in the response to NaF-induced ferroptosis. Collectively, NaF-induced gut microbiota alteration mediates severe intestinal cell injury by inducing m6A modification-mediated ferroptosis. Our results highlight a key mechanism of the gut in response to NaF exposure and suggest a valuable theoretical basis for its prevention and treatment.

Effect of postprocessing parameters on the flexural strength of vat-polymerized additively manufactured interim fixed dental prostheses: A systematic review with postprocessing guidelines.

STATEMENT OF PROBLEM: Limited data exist regarding the effects of postprocessing on the flexural strength of vat-polymerized additively manufactured (AM) interim fixed dental prostheses. PURPOSE: The purpose of this systematic review was to determine how the postprocessing workflow affects the mechanical properties of vat-polymerized additively manufactured interim fixed dental prostheses and to establish clinical guidelines. MATERIAL AND METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were followed. The population, intervention, comparison, and outcome (PICO) question was "For vat-polymerized additively manufactured interim fixed dental prostheses (P), does varying the postprocessing workflow/ protocol (I and C) affect mechanical properties/physical properties/flexural strength (O)?" Searches were conducted in 3 databases: PubMed/Medline, EMBASE, and Web of Science, with 2 investigators performing the title and abstract screening and setting the inclusion and exclusion criteria to identify publications. The risk of bias was evaluated by applying the Joanna Briggs Institute Critical Appraisal Checklist for Quasi-Experimental Studies (nonrandomized experimental studies). The reported independent variables of rinse solution, rinse time, and polymerization time on the flexural strength results were extracted for qualitative review. RESULTS: The initial search identified 149 records, with 12 in vitro studies meeting the inclusion criteria. Significant heterogeneity was observed in the manufacturing process and materials. Eleven of 12 included studies reported flexural strength above 100 MPa when following the manufacturer's recommendation. Postprocessing rinsing ranged from 5 seconds to 90 minutes, with potentially reduced flexural strength with extended rinsing. A rinse of 5 to 10 minutes was recommended for optimal mechanical properties, degree of conversion, and biocompatibility. Isopropyl alcohol (IPA) and tripropylene glycol monomethyl ether (TPM) were the most investigated rising solutions, while experimental solutions including 99.5% acetone and 100% bio-ethyl alcohol reportedly decreased flexural strength. Polymerization time and intensity correlated positively with the flexural strength, whereas an artificial aging process reduced the flexural strength. CONCLUSIONS: Heterogeneity existed in the reported postprocessing protocols for AM interim fixed prostheses, including manufacturer materials, methods, and study outcomes. While polymerization time and intensity correlated with greater strength, consistent patterns regarding rinsing solution or time were lacking. Rinsing solution, extended rinsing time, and artificial aging may reduce flexural strength. Further investigation is indicated.

Shade match comparison of CAD-CAM single crowns to a lithium disilicate crown.

PURPOSE: To assess the shade match ability of four varieties of all-ceramic crowns to a neighboring bilayered lithium disilicate crown. MATERIAL AND METHODS: A dentiform was used to fabricate a bilayered lithium disilicate crown on the maxillary right central incisor, following the anatomy and shade of a selected natural tooth. Two crowns (one full-contour, one cutback) were then designed on a prepared maxillary left central incisor, following the contour of the neighboring crown. The designed crowns were used to manufacture monolithic lithium disilicate, bilayered lithium disilicate, bilayered zirconia, and monolithic zirconia crowns, 10 each. An intraoral scanner and a spectrophotometer were used to assess the frequency of matched shades and to calculate the color difference (ΔE) between the two central incisors at the incisal, middle, and cervical thirds. Kruskal-Wallis and two-way ANOVA were used to compare the frequency of matched shades and ΔE values, respectively (α = 0.05). RESULTS: There was no significant (p > 0.05) difference in frequencies of matched shades for each group at the three sites; except bilayered lithium disilicate crowns. Bilayered lithium disilicate crowns had significantly (p < 0.05) higher match frequency than monolithic zirconia at the middle third. The ΔE value was not significantly (p > 0.05) different among the groups at the cervical third. However, monolithic zirconia had significantly (p < 0.05) higher ΔE values than bilayered lithium disilicate and zirconia at the incisal and middle thirds. CONCLUSIONS: Bilayered lithium disilicate and zirconia appeared to most closely match the shade of an existing bilayered lithium disilicate crown.

A novel mucosal bivalent vaccine of EV-A71/EV-D68 adjuvanted with polysaccharides from Ganoderma lucidum protects mice against EV-A71 and EV-D68 lethal challenge.

BACKGROUND: Human enteroviruses A71 (EV-A71) and D68 (EV-D68) are the suspected causative agents of hand-foot-and-mouth disease, aseptic meningitis, encephalitis, acute flaccid myelitis, and acute flaccid paralysis in children. Until now, no cure nor mucosal vaccine existed for EV-A71 and EV-D68. Novel mucosal bivalent vaccines are highly important for preventing EV-A71 and EV-D68 infections. METHODS: In this study, formalin-inactivated EV-A71 and EV-D68 were used as antigens, while PS-G, a polysaccharide from Ganoderma lucidum, was used as an adjuvant. Natural polysaccharides have the characteristics of intrinsic immunomodulation, biocompatibility, low toxicity, and safety. Mice were immunized intranasally with PBS, EV-A71, EV-D68, or EV-A71 + EV-D68, with or without PS-G as an adjuvant. RESULTS: The EV-A71 + EV-D68 bivalent vaccine generated considerable EV-A71- and EV-D68-specific IgG and IgA titres in the sera, nasal washes, saliva, bronchoalveolar lavage fluid, and feces. These antibodies neutralized EV-D68 and EV-A71 infectivity. They also cross-neutralized infections by different EV-D68 and EV-A71 sub-genotypes. Furthermore, compared with the PBS group, EV-A71 + EV-D68 + PS-G-vaccinated mice exhibited an increased number of EV-D68- and EV-A71-specific IgA- and IgG-producing cells. In addition, T-cell proliferative responses, and IFN-γ and IL-17 secretion in the spleen were substantially induced when PS-G was used as an adjuvant with EV-A71 + EV-D68. Finally, in vivo challenge experiments demonstrated that the immune sera induced by EV-A71 + EV-D68 + PS-G conferred protection in neonate mice against lethal EV-A71 and EV-D68 challenges as indicated by the increased survival rate and decreased clinical score and viral RNA tissue expression. Taken together, all EV-A71/EV-D68 + PS-G-immunized mice developed potent specific humoral, mucosal, and cellular immune responses to EV-D68 and EV-A71 and were protected against them. CONCLUSIONS: These findings demonstrated that PS-G can be used as a potential adjuvant for EV-A71 and EV-D68 bivalent mucosal vaccines. Our results provide useful information for the further preclinical and clinical development of a mucosal bivalent enterovirus vaccine against both EV-A71 and EV-D68 infections.

Fully automated film mounting in dental radiography: a deep learning model.

BACKGROUND: Dental film mounting is an essential but time-consuming task in dental radiography, with manual methods often prone to errors. This study aims to develop a deep learning (DL) model for accurate automated classification and mounting of both intraoral and extraoral dental radiography. METHOD: The present study employed a total of 22,334 intraoral images and 1,035 extraoral images to train the model. The performance of the model was tested on an independent internal dataset and two external datasets from different institutes. Images were categorized into 32 tooth areas. The VGG-16, ResNet-18, and ResNet-101 architectures were used for pretraining, with the ResNet-101 ultimately being chosen as the final trained model. The model's performance was evaluated using metrics of accuracy, precision, recall, and F1 score. Additionally, we evaluated the influence of misalignment on the model's accuracy and time efficiency. RESULTS: The ResNet-101 model outperformed VGG-16 and ResNet-18 models, achieving the highest accuracy of 0.976, precision of 0.969, recall of 0.984, and F1-score of 0.977 (p < 0.05). For intraoral images, the overall accuracy remained consistent across both internal and external datasets, ranging from 0.963 to 0.972, without significant differences (p = 0.348). For extraoral images, the accuracy consistently achieved the highest value of 1 across all institutes. The model's accuracy decreased as the tilt angle of the X-ray film increased. The model achieved the highest accuracy of 0.981 with correctly aligned films, while the lowest accuracy of 0.937 was observed for films exhibiting severe misalignment of ± 15° (p < 0.001). The average time required for the tasks of image rotation and classification for each image was 0.17 s, which was significantly faster than that of the manual process, which required 1.2 s (p < 0.001). CONCLUSION: This study demonstrated the potential of DL-based models in automating dental film mounting with high accuracy and efficiency. The proper alignment of X-ray films is crucial for accurate classification by the model.

Constructing a yeast to express the largest cellulosome complex on the cell surface.

Cellulosomes, which are multienzyme complexes from anaerobic bacteria, are considered nature's finest cellulolytic machinery. Thus, constructing a cellulosome in an industrial yeast has long been a goal pursued by scientists. However, it remains highly challenging due to the size and complexity of cellulosomal genes. Here, we overcame the difficulties by synthesizing the Clostridium thermocellum scaffoldin gene (CipA) and the anchoring protein gene (OlpB) using advanced synthetic biology techniques. The engineered Kluyveromyces marxianus, a probiotic yeast, secreted a mixture of dockerin-fused fungal cellulases, including an endoglucanase (TrEgIII), exoglucanase (CBHII), ß-glucosidase (NpaBGS), and cellulase boosters (TaLPMO and MtCDH). The confocal microscopy results confirmed the cell-surface display of OlpB-ScGPI and fluorescence-activated cell sorting analysis results revealed that almost 81% of yeast cells displayed OlpB-ScGPI. We have also demonstrated the cellulosome complex formation using purified and crude cellulosomal proteins. Native polyacrylamide gel electrophoresis and mass spectrometric analysis further confirmed the cellulosome complex formation. Our engineered cellulosome can accommodate up to 63 enzymes, whereas the largest engineered cellulosome reported thus far could accommodate only 12 enzymes and was expressed by a plasmid instead of chromosomal integration. Interestingly, CipA 2B9C (with two cellulose binding modules, CBM) released significantly higher quantities of reducing sugars compared with other CipA variants, thus confirming the importance of cohesin numbers and CBM domain on cellulosome complex. The engineered yeast host efficiently degraded cellulosic substrates and released 3.09 g/L and 8.61 g/L of ethanol from avicel and phosphoric acid-swollen cellulose, respectively, which is higher than any previously constructed yeast cellulosome.

Comparison of LeniScar Silicone Stick (AnsCare) With Traditional Silicone Gel (Dermatix Ultra) in Wound Scar Prevention and Removal.

BACKGROUND: As we all know, the numbers of aesthetic surgery are increasing around the world. After the surgery, the scar would be a problematic issue for both the surgeons and the patients. Silicone has proven to be effective for keloids, hypertrophic scars, and prevention of scar formation in many literatures for a long time. In terms of scar prevention, silicone has been used in the form of silicone sheets in early times, which is later improved to be the form of silicone gel with the advantage of easier usage. Although silicone gel has improved greatly in the aspect of appearance and convenience of the silicone sheets, there are still some disadvantages of the gel form. Therefore, the LeniScar silicone stick (AnsCare) is invented. OBJECTIVE: This article aimed to compare the results of scar treatment and prevention of the AnsCare LeniScar Silicone Stick versus the traditional silicone gel (Dermatix Ultra). METHODS: This study was a prospective, nonblinded, randomized clinical study. There were a total of 68 patients from September 2018 to January 2020. Patients were divided into 2 groups with AnsCare (n = 43) and Dermatix (n = 25), who both were required to schedule regular outpatient clinic follow-up, and photographs were taken before use, 1, 2, and 3 months later after the usage for the record. The physician assessed the scar condition by the Vancouver Scar Scale (VSS). The scores of the VSS were further analyzed and compared. RESULTS: The overall P value of total score of VSS was 0.635, which indicates that there is no significant difference in using AnsCare LeniScar Silicone Stick versus Dermatix Ultra silicone gel in terms of scar prevention and treatment. Individual items of VSS such as pliability, height, vascularity, and pigmentation all show no significant statistical difference in the 2 treatment products, with P = 0.980, 0.778, 0.528, and 0.366, respectively. CONCLUSION: Traditional Dermatix Ultra silicone gel has been effective in the treatment of scar formation. AnsCare LeniScar Silicone Stick is statistically not different from the Dermatix Ultra silicone gel when comparing the treatment results of scar prevention. Furthermore, the AnsCare LeniScar Silicone Stick has the advantages of being time-saving with no need to wait for it to dry and application of precise amount to precise location, preventing waste or overuse.

From self-care behaviours to cardiometabolic risks prevention for the health of farmers: Nursing implications.

AIMS: The study aimed to explore farmers' self-care behaviours including oral hygiene, remaining natural teeth, cardiometabolic risks, hepatitis, risk of stroke and their determinant factors. METHODS: This cross-sectional study was conducted between June 2020 and March 2021 in the south-western remote areas of Taiwan. We recruited current farmers who participated in an annual community health screening conducted by a collaborated local hospital. Data were collected through face-to-face interviews using a semi-structured questionnaire. Blood samples were drawn and stored in the central laboratory of the cooperating hospital. The study outcomes included cardiometabolic risks, the remaining natural teeth, and farmers' self-care behaviours including oral hygiene, adopting a healthy diet and substance use. RESULTS: Overall, 183 current farmers (55.2% women, aged 66.9 ± 11.7 years) were enrolled. Abnormal blood pressure, high risk of stroke, metabolic syndrome and hepatitis C virus infection were found among the participants. The average remaining teeth were 12.1, 73.2% of participants had <20 teeth; 90.2% and 71% did not undergo regular dental check-ups and scaling or use dental floss, respectively. The determinant factors associated with the remaining teeth included a high risk of stroke, teeth scaling and dental floss use. Although only 3.8% felt mentally distressed, many farmers were unaware of having potential cardiometabolic diseases and curable viral hepatitis, and only two had received antiviral treatment. CONCLUSION: The farmers in this study had a high prevalence of cardiometabolic risks, a high probability of stroke, inadequate number of remaining teeth and poor oral hygiene behaviours. These findings can provide evidence to develop health promotion programmes for farmers. IMPACT: This study demonstrates the health needs of farmers. We strongly recommend that community nurses empower farmers to engage in self-care behaviours through tailored health promotion programmes. For instance, by discussing cardiometabolic risk prevention from the farmers' perspectives to improve their health literacy.

Sustained Release of Antifungal and Antibacterial Agents from Novel Hybrid Degradable Nanofibers for the Treatment of Polymicrobial Osteomyelitis.

This study aimed to develop a drug delivery system with hybrid biodegradable antifungal and antibacterial agents incorporated into poly lactic-co-glycolic acid (PLGA) nanofibers, facilitating an extended release of fluconazole, vancomycin, and ceftazidime to treat polymicrobial osteomyelitis. The nanofibers were assessed using scanning electron microscopy, tensile testing, water contact angle analysis, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. The in vitro release of the antimicrobial agents was assessed using an elution method and a high-performance liquid chromatography assay. The in vivo elution pattern of nanofibrous mats was assessed using a rat femoral model. The experimental results demonstrated that the antimicrobial agent-loaded nanofibers released high levels of fluconazole, vancomycin, and ceftazidime for 30 and 56 days in vitro and in vivo, respectively. Histological assays revealed no notable tissue inflammation. Therefore, hybrid biodegradable PLGA nanofibers with a sustainable release of antifungal and antibacterial agents may be employed for the treatment of polymicrobial osteomyelitis.

Single-nucleotide polymorphisms in Orai1 associated with atopic dermatitis inhibit protein turnover, decrease calcium entry and disrupt calcium-dependent gene expression.

Loss-of function mutations in Orai1 Ca2+ channels lead to a form of severe combined immunodeficiency, auto-immunity, muscle hypotonia and defects in dental enamel production and sweat gland function. Two single-nucleotide polymorphisms (SNPs) in Orai1 have been found and localize to the second extracellular loop. These polymorphisms associate with atopic dermatitis but how they affect Ca2+ signalling and cell function is unknown. Here, we find that Orai1-SNPs turnover considerably more slowly than wild type Orai1 and are more abundantly expressed in the plasma membrane. We show a central role for flotillin in the endocytotic recycling of Orai1 channels and that endocytosed wild type Orai1 is trafficked to Rab 7-positive late endosomes for lysosomal degradation. Orai1-SNPs escape the degradation pathway and instead enter Rab 11-positive recycling endosomes, where they are returned to the surface membrane through Arf6-dependent exocytosis. We find that Orai1-SNPs escape late endosomes through endosomal pH regulation of interaction between the channel and flotillin. We identify a pH-sensitive electrostatic interaction between positively charged arginine in extracellular loop 2 (K210) and a negatively charged aspartate (D112) in extracellular loop 1 that helps determine Orai1 turnover. The increase in membrane Orai1-SNP leads to a mis-match in Orai1-STIM stoichiometry, resulting in inhibition of Ca2+ entry and Ca2+-dependent gene expression. Our results identify new strategies for targeting atopic dermatitis.

Prevalence of Type IV Pili-Mediated Twitching Motility in Streptococcus sanguinis Strains and Its Impact on Biofilm Formation and Host Adherence.

Type IV pili (Tfp) are known to mediate several biological activities, including surface-dependent twitching motility. Although a pil gene cluster for Tfp biosynthesis is found in all sequenced Streptococcus sanguinis strains, Tfp-mediated twitching motility is less commonly detected. Upon examining 81 clinical strains, 39 strains generated twitching zones on blood agar plates (BAP), while 27 strains displayed twitching on Todd-Hewitt (TH) agar. Although BAP appears to be more suitable for the development of twitching zones, 5 strains exhibited twitching motility only on TH agar, indicating that twitching motility is not only strain specific but also sensitive to growth media. Furthermore, different twitching phenotypes were observed in strains expressing comparable levels of pilT, encoding the retraction ATPase, suggesting that the twitching phenotype on agar plates is regulated by multiple factors. By using a PilT-null and a pilin protein-null derivative (CHW02) of twitching-active S. sanguinis CGMH010, we found that Tfp retraction was essential for biofilm stability. Further, biofilm growth was amplified in CHW02 in the absence of shearing force, indicating that S. sanguinis may utilize other ligands for biofilm formation in the absence of Tfp. Similar to SK36, Tfp from CGMH010 were required for colonization of host cells, but PilT only marginally affected adherence and only in the twitching-active strain. Taken together, the results suggest that Tfp participates in host cell adherence and that Tfp retraction facilitates biofilm stability. IMPORTANCE Although the gene clusters encoding Tfp are commonly present in Streptococcus sanguinis, not all strains express surface-dependent twitching motility on agar surfaces. Regardless of whether the Tfp could drive motility, Tfp can serve as a ligand for the colonization of host cells. Though many S. sanguinis strains lack twitching activity, motility can enhance biofilm stability in a twitching-active strain; thus, perhaps motility provides little or no advantage to the survival of bacteria within dental plaque. Rather, Tfp retraction could provide additional advantages for the bacteria to establish infections outside the oral cavity.

A novel co-amplification system for simultaneous amplification of 23 Y-STR and identification of spermatozoa.

In alleged sexual assault cases, identification of the presence of spermatozoa at the crime scene, or on items of eventual significance, or associated with the body of the victim, is integral to the forensic investigation to support or refute the proposition that sexual act has occurred. A 3-plex MSRE-PCR (methylation-sensitive restriction enzyme-PCR) system has been developed previously to identify spermatozoa based on the presence or absence of DNA methylation. This assay showed that 0.1 ng of DNA from a semen extract was sufficient to identify the presence of spermatozoa even when there was excessively more DNA isolated from vaginal fluid than DNA from a semen extract (80 ng/0.1 ng) or a mix of the menstrual blood/semen DNA (5 ng/0.1 ng). In this study, we combine spermatozoa detection with co-amplification of 23 Y-STR loci. We perform standard validation steps to present a novel test that saves time and uses the same sample for both DNA typing and spermatozoa detection in the same reaction. The combined assay can identify Y-STR and spermatozoa simultaneously using just 0.1 ng semen DNA, even in the presence of 5 ng of DNA from a female (male/female:1/50). No other body fluid tested, such as saliva, gave a result for the presence of spermatozoa. A total of 9 non-probative forensic samples from 7 sexual assault cases were tested by this co-amplification system. In all cases, the same sperm-positive data were obtained, concordant with our previous study analyzed by only 3-plex MSRE-PCR, and the Y-STR results were also consistent with that analyzed by only PowerPlex® Y23 kit. The co-amplification will be beneficial for the limited samples in many criminal cases.

Antibacterial activity and action target of phenyllactic acid against Staphylococcus aureus and its application in skim milk and cheese.

Phenyllactic acid (PLA) has been demonstrated to possess antibacterial activity and capacity to prolong food shelf life. However, studies on the performance of PLA in inhibiting Staphylococcus aureus and its effectiveness when applied to dairy products are largely lacking. Here, antibacterial activity (planktonic and biofilm states) of PLA against S. aureus CICC10145 (S. aureus_45) were investigated. The results showed that PLA inhibited growth of S. aureus_45 and formation of S. aureus_45 biofilm. Next, the antibacterial action target of PLA was uncovered from both physiological and phenotypic perspectives. The results showed that PLA decreased cell metabolic activity and cell viability, damaged cell membrane integrity, triggered leakage of intracellular contents (DNA, proteins, and ATP), and caused oxidative stress damage and morphological deformation of S. aureus_45. In practical application, the antibacterial activity of PLA against S. aureus_45 cells was further confirmed in skim milk and cheese as dairy food models, and the antibacterial effects can be adequately maintained during storage for 21 d, at least at 4°C. These findings suggested that PLA could be a potential candidate for controlling S. aureus outgrowth in dairy foods.

Clinical T4b Squamous Cell Carcinoma Resection With Hemimandibulectomy and Temporomandibular Joint Reconstruction With Bridging Plate and Modified Dautrey Procedure.

ABSTRACT: Clinical T4b oral squamous cell carcinoma is traditionally considered nonoperable. We present a case of right mandibular squamous cell carcinoma (PT4bN0M0, stage IVB). The tumor had extended to the right mandibular condylar head and masticatory space. The patient received right modified radical neck dissection and radical operation with hemimandibulectomy to remove the right mandibular condyle. Then, we reconstructed the resected portion with an anterior lateral thigh free flap and bridging plate, which was bent to form an artificial condyle and fixed using the modified Dautrey procedure. The patient had stable postoperative occlusion and normal hinge movement of the temporomandibular joint. After postoperative concurrent chemotherapy and radiotherapy, the patient is under regular out patient department follow-up with satisfactory jaw function and oral intake.

Virtual Planning and Rapid 3D Prototyping Surgical Guide for Anterior Crown Lengthening Surgery: A Clinical Case Report.

Progress with additive 3D printing is revolutionizing biomaterial manufacturing, including clinical dentistry and prosthodontics. Among the several 3D additive printing technologies, stereolithography is very popular as it utilizes light-activated resin for precise resolution. A simplified digital technique was used to fabricate two designs of a surgical guide for crown lengthening. Two cases are presented that utilized digital imaging and communications in medicine (DICOM) files obtained with computed tomography (CT) imaging and processed using four CAD software (Blue Sky Plan, Exocad, Meshmixer and 3D Slicer). The final models were converted to standard tessellation (STL) files and the guides were 3D printed with an additive stereolithography (SLA) printer. The first case was fabricated with a bone model from cone beam computed tomography (CBCT) data, and the second case was generated with intraoral and wax-up scans alone. Both methods appear to be equally effective compared to using a conventional method of guide frabication. However, proximal bone reduction was a concern with both designs. Digitally fabricated 3D printed surgical guide for crown lengthening has merit and a practical design is needed for future clinical validation.

Preclinical evaluation of PEGylated liposomal doxorubicin as an effective radiosensitizer in chemoradiotherapy for lung cancer.

PURPOSE: Development of a safe and effective systemic chemotherapeutic agent for concurrent administration with definitive thoracic radiotherapy remains a major goal of lung cancer management. The synergistic effect of PEGylated liposomal doxorubicin and irradiation was evaluated in lung cancer cell lines both in vitro and in vivo. METHODS: In vitro radiosensitization of A549 and LLC cell lines was evaluated by colony formation assay, γH2AX fluorescent staining and western blot assay, and annexin V staining. A radiosensitization study with healthy human lung-derived cell line BEAS-2B was performed for comparative purposes. In vivo radiosensitization was evaluated by tumor ectopic growth, cell survival, pharmacokinetics, and biodistribution analyses. Cleaved caspase­3, the marker for apoptosis, was assessed immunohistochemically in A549 xenograft tumors. RESULTS: Treatment with PEGylated liposomal doxorubicin decreased A549 and LLC cell proliferation in a dose-dependent manner. In vitro studies revealed comparable radiosensitizer advantages of PEGylated liposomal doxorubicin and free doxorubicin, showing equivalent DNA double-strand breaks according to γH2AX fluorescent staining and western blot assays, similar numbers of apoptotic cells in the annexin­V staining assay, and moderately decreased clonogenic survival. In vivo studies demonstrated markedly slow ectopic tumor growth with prolonged survival following treatment with PEGylated liposomal doxorubicin plus irradiation in both A549 and LLC mouse models, suggesting that PEGylated liposomal doxorubicin is more effective as a radiosensitizer than free doxorubicin in vivo. Pharmacokinetics evaluation showed a longer half-life of approximately 40 h for PEGylated liposomal doxorubicin, confirming that the liposomal carrier achieved controlled release. Biodistribution evaluation of PEGylated liposomal doxorubicin confirmed high accumulation of doxorubicin in tumors, indicating the promising drug delivery attributes of PEGylated liposomal doxorubicin. Although free doxorubicin caused histopathologic myocarditis with the cardiac muscle fibers showing varying degrees of damage, PEGylated liposomal doxorubicin caused no such effects. The immunohistochemical expression of cleaved caspase-3-positive cells was greatest expressed in the irradiation and PEGylated liposomal doxorubicin combined treatment group, indicating prolonged tumoricidal effects. CONCLUSIONS: Our study provides preclinical in vitro and in vivo evidence of the effectiveness of PEGylated liposomal doxorubicin as a radiosensitizer, supporting its potential clinical development as a component of chemoradiotherapy.