Magnolol-loaded core-shell hydrogel nanoparticles: drug release, intracellular uptake, and controlled cytotoxicity for the inhibition of migration of vascular smooth muscle cells.

Encapsulation and release behavior of a water-insoluble drug, magnolol, using a core-shell polysaccharide-based nanoparticle, manipulating the cellular internalization and controlled cytotoxic effect of magnolol-loaded nanoparticles over the A10 vascular smooth muscle cells (VSMCs) was reported. A magnolol-polyvinylpyrrolidone (PVP) core phase was prepared, followed encapsulating by an amphiphilic carboxymethyl-hexanoyl chitosan (CHC) shell to form a magnolol-loaded core-shell hydrogel nanoparticles (termed magnolol-CHC nanoparticles). The resulting magnolol-CHC nanoparticles were employed for evaluation of drug release and controlled cytotoxic inhibition of VSMCs migration in vitro. A sustained release of the magnolol from the nanoparticles was determined. The magnolol-CHC nanoparticles exhibited outstanding cellular uptake efficiency, and under a cytotoxic evaluation, an increased antiproliferative effect and effective inhibition of VSMC migration as a result of efficient intracellular delivery of the encapsulated magnolol in comparison to free magnolol was achieved. We then envision a potential intracellular medication strategy with improved biological and therapeutic efficacy using the magnolol-CHC nanoparticles illustrated in this work.

A nanoporous optically transparent CdS-pHEMA hybrid with high optical sensing capability to dielectric liquids.

A hydrogel-based functional hybrid with highly uniformly dispersed nanoparticulate CdS semiconductors is proposed. The hybrid is synthesized using an in situ polymerization following an in situ chemical reduction, where the resulting particle size and the distribution of CdS nanocrystals (NCs) can be narrowly manipulated. The hybrids, containing a relatively small amount of the CdS NCs, exhibit a pronounced photoluminescence spectrum shift when in contact with a number of dielectric liquids and such a pronounced dielectric-confinement effect has been experimentally verified and modeled in this study. The sensing capability of the hybrids with respect to dielectric liquids or molecules can be optically characterized and varied depending upon the intensity of the dielectric environment surrounding the hybrids. This work suggests that the transparent, nanoporous CdS-pHEMA hybrids can be used as highly efficient optical sensing materials.

Inhibition of Periodontitis Induction Using a Stimuli-Responsive Hydrogel Carrying Naringin.

BACKGROUND: Developing a drug carrier with favorable handling characteristics that can respond to environmental changes after inflammation, such as pH changes, may be beneficial for treating periodontitis. This study aims to investigate the preclinical feasibility of using naringin, a naturally derived polymethoxylated flavonoid compound with anti-inflammatory properties, to inhibit periodontitis induction via a thermogelling and pH-responsive injectable hydrogel. METHODS: The hydrogel was made of amphipathic carboxymethyl-hexanoyl chitosan (CHC), ß-glycerol phosphate (ß-GP), and glycerol. Thermogelling and pH-responsive characteristics of the hydrogel, as well as cell viability after treatment with the hydrogel containing naringin, were evaluated in vitro. Hydrogel was subgingivally delivered when experimental periodontitis was induced in vivo, and therapeutic effect was evaluated with microcomputed tomography imaging, histology, and expression of inflammation-associated genes, including toll-like receptor (TLR)2, the receptor for advanced glycation end products (RAGE), myeloid differentiation primary response gene-88, and tumor necrosis factor (TNF)-α. RESULTS: The hydrogel was consistently fluidic at 4°C but rapidly gelled at 37°C. Release of naringin was faster at pH 5.5 to 6.5, and viability was significantly promoted by treatment with 0.85% naringin. Naringin-carrying CHC-ß-GP-glycerol hydrogel sites showed significantly reduced periodontal bone loss (P <0.05) and inflammatory infiltration (P <0.01) as well as significantly downregulated TLR2 (P <0.05), RAGE (P <0.01), and TNF-α (P <0.05) relative to the sites with experimental periodontitis alone. CONCLUSION: Naringin-carrying CHC-ß-GP-glycerol colloidal hydrogel can be used to inhibit induction of experimental periodontitis with favorable handling and inflammation-responsive characteristics.

Study on drug release behaviour of CDHA/chitosan nanocomposites--effect of CDHA nanoparticles.

To explore the effect of nanofiller-polymer interaction on the drug release behaviour from a monolithic membrane prepared by Ca-deficient hydroxyapatite (CDHA)/chitosan nanocomposite, release kinetics was investigated in terms of different synthetic processes, i.e. in situ and ex situ routes, and various amounts of CDHA. It was found that a higher value of diffusion exponent (n) was obtained for the membranes in situ synthesized compared with those ex situ prepared. In addition, the n value of the membranes in situ synthesized increased with increasing CDHA amount, which remained in the range below 10wt.%. However, as CDHA content exceeded 30%, the n value remained constant. It indicates that the drug diffusion mechanism is altered by the CDHA-chitosan interaction which is strongly influenced by both the synthesis process and the concentration of the CDHA nanofiller in the membrane. On the other hand, a lower permeability (P) value of the membranes was observed for those prepared via the in situ process. Furthermore, P value decreased and increased with increasing CDHA amount in the range below and above 10wt.%, respectively. It demonstrates that CDHA nanofillers act either diffusion barrier or diffusion enhancer for the CDHA/chitosan membranes, which is determined by the concentration of CDHA nanofiller and the synthesis route of nanocomposite.

Injectable insulin-lysozyme-loaded nanogels with enzymatically-controlled degradation and release for basal insulin treatment: In vitro characterization and in vivo observation.

Diabetes is a common global disease that causes immense suffering for individuals and huge costs for the health care system. To minimize complications such as organ degeneration, diabetic patients are required to undergo treatments to maintain the blood glucose level in the normal range, ideally mimicking normal insulin secretion. The normal physiological insulin secretion pattern in healthy individuals consists of a base (basal) level through the day and increased secretion after meals (bolus insulin). Thus effective treatments may combine long acting, low-level insulin therapy with boosts of short acting insulin and/or oral agents. To achieve long term management of basal insulin level, an injectable insulin-loaded gel composed of self-assembled nanoparticles from carboxymethyl-hexanoyl chitosan (CHC) and integrated lysozyme for controlled biodegradation and insulin release was developed. In vitro characterizations and evaluations confirmed that lysozyme was active on CHC and that the amount of lysozyme in a CHC hydrogel determined the degradation and insulin release rate. The degradation products were found to be highly cytocompatible using a cell assay. In vivo evaluation of the system in a diabetic mouse model revealed that the fasted blood glucose level could be maintained in the normal range for 10days with a single injection of insulin-loaded CHC-lysozyme gel. The insulin-loaded CHC-lysozyme gels clearly show promise for use as a novel injectable long-acting insulin delivery system, with potential to manage the basal insulin level for many days with a single injection.

pH-Responsive Hydrogel With an Anti-Glycation Agent for Modulating Experimental Periodontitis.

BACKGROUND: Stimulus-responsive devices have emerged as a novel approach for local drug delivery. This study investigates the feasibility of a novel chitosan-based, pH-responsive hydrogel loaded with N-phenacylthiazolium bromide (PTB), which cleaves the crosslinks of advanced glycation end products on the extracellular matrix. METHODS: A chitosan-based hydrogel loaded with PTB was fabricated, and the in vitro release profile was evaluated within pH 5.5 to 7.4. BALB/cJ mice and Sprague-Dawley rats were used to evaluate the effects during the induction and recovery phases of periodontitis, respectively, and animals in each phase were divided into four groups: 1) no periodontitis induction; 2) ligature-induced experimental periodontitis (group PR); 3) experimental periodontitis plus hydrogel without PTB (group PH); and 4) experimental periodontitis plus hydrogel with PTB (group PP). The therapeutic effects were evaluated by microcomputed tomographic imaging of periodontal bone level (PBL) loss and histomorphometry for inflammatory cell infiltration and collagen density. RESULTS: PTB was released faster at pH 5.5 to 6.5 and consistently slower at pH 7.4. In the induction phase, PBL and inflammatory cell infiltration were significantly reduced in group PP relative to group PR, and the loss of collagen matrix was significantly reduced relative to that observed in group PH. In the recovery phase, PBL and inflammatory cell infiltration were significantly reduced, and significantly greater collagen deposition was noted in group PP relative to groups PR and PH at 4 and 14 days after silk removal. CONCLUSION: Chitosan-based, pH-responsive hydrogels loaded with PTB can retard the initiation of and facilitate the recovery from experimental periodontitis.

In-situ preparation of poly(propylene fumarate)--hydroxyapatite composite.

In-situ precipitation of hydroxyapatite (HAp) in the presence of poly(propylene fumarate) (PPF) is investigated. Amorphous calcium phosphate (ACP) precipitates in the presence of the polymer and remains in the amorphous form for a relatively long time, e.g. even after 24 h of coexistence with the mother solution. Our observations suggest that PPF interacts with the surface of the ACP particles and prevents them from transformation to crystalline hydroxyapatite. The PPF polymer seems to be more efficient in hindering the ACP to HAp transformation at higher pH conditions. From spectroscopic observations we hypothesize that the C=O bond of the PPF molecules interact with the calcium ion of the ACP particles. In case of low molecular weight PPF this interaction may lead to the incorporation of the polymer within the growing ACP particles.

Manipulation of nanoneedle and nanosphere apatite/poly(acrylic acid) nanocomposites.

Colloidal apatitic nanosphere of 2-5 nm in diameter was synthesized in the presence of poly(acrylic acid), PAA. PAA, which has long been recognized as an inhibitor in the synthesis of hydroxyapatite, is used as a structure-directing agent for the synthesis of calcium-deficient apatite (CDHA) in this study. Experimental observation suggests a critical amount of the low-molecular-weight PAA, above which morphological evolution of CDHA nanoparticles from needle to sphere was observed. This reveals that the PAA acts as an inhibitor for the growth of CDHA crystals. Further incorporation of PAA of high molecular weight formed a highly optically transparent nanocomposite, even with the nanospherical apatite loading up to 35 wt %, suggesting no agglomeration. This was further justified through transmission electron microscopy (TEM), where the CDHA nanospheres were uniformly distributed in the PAA-CDHA nanocomposites. No interfacial crevices were visually observed, indicating a highly compatible interface between the inorganic CDHA and organic PAA phase.

Enhanced antioxidant capacity of dental pulp-derived iPSC-differentiated hepatocytes and liver regeneration by injectable HGF-releasing hydrogel in fulminant hepatic failure.

Acute hepatic failure (AHF) is a severe liver injury leading to sustained damage and complications. Induced pluripotent stem cells (iPSCs) may be an alternative option for the treatment of AHF. In this study, we reprogrammed human dental pulp-derived fibroblasts into iPSCs, which exhibited pluripotency and the capacity to differentiate into tridermal lineages, including hepatocyte-like cells (iPSC-Heps). These iPSC-Heps resembled human embryonic stem cell-derived hepatocyte-like cells in gene signature and hepatic markers/functions. To improve iPSC-Heps engraftment, we next developed an injectable carboxymethyl-hexanoyl chitosan hydrogel (CHC) with sustained hepatocyte growth factor (HGF) release (HGF-CHC) and investigated the hepatoprotective activity of HGF-CHC-delivered iPSC-Heps in vitro and in an immunocompromised AHF mouse model induced by thioacetamide (TAA). Intrahepatic delivery of HGF-CHC-iPSC-Heps reduced the TAA-induced hepatic necrotic area and rescued liver function and recipient viability. Compared with PBS-delivered iPSC-Heps, the HGF-CHC-delivered iPSC-Heps exhibited higher antioxidant and antiapoptotic activities that reduced hepatic necrotic area. Importantly, these HGF-CHC-mediated responses could be abolished by administering anti-HGF neutralizing antibodies. In conclusion, our findings demonstrated that HGF mediated the enhancement of iPSC-Hep antioxidant/antiapoptotic capacities and hepatoprotection and that HGF-CHC is as an excellent vehicle for iPSC-Hep engraftment in iPSC-based therapy against AHF.

Influence of apatite seeds on the synthesis of calcium phosphate cement.

This preliminary study explores the seeding effect (using crystalline hydroxyapatite particles) on the setting time, compressive strength, phase evolution, and microstructure of calcium phosphate cements (CPC) based on monocalcium phosphate monohydrate and calcium hydroxide. Experimental results showed that the setting time varies from 5 to about 30 min, as the seed concentration increased from 0 to 20 wt%. The compressive strength of CPC increased from 4 to 17 MPa, followed by decrease to 12 MPa, for the same range of seeds content. The CPC transformed to predominantly apatitic structure within 24 h for all the samples, with or without the seeds. However, increase of the seed concentration improved the final crystallinity of the apatite phase, suggesting nucleation and growth effects during precipitation of CPC from the precursor solution. The microstructure of the resulting apatitic cement showed a change from essentially featureless (or glass-like) to thin, elongated plate-like morphology, as seeds concentration increased. Correlation between microstructural evolution and corresponding compressive strength of seeded CPC is investigated.

Aging effect on the phase evolution of water-based sol-gel hydroxyapatite.

In a number of recent reports on the synthesis of sol-gel hydroxyapatite, aging of the precursor solution has been found to be critical in developing an apatitic phase. Critical aging time is required to complete reaction between Ca and P molecular precursors to form a desired intermediate complex that permits a further transformation to apatite phase under appropriate thermal treatment. In this investigation, we employed a water-based sol-gel process recently developed to fabricate hydroxyapatite at relatively low temperatures. The aging effect on apatite formation was systematically studied in terms of aging time and temperature. Experimental results show that the aging time is considerably reduced as aging temperature rises. Long-term thermal aging was unfavorable for apatite formation. The optimal aging parameters for apatite formation were experimentally determined, which was further consolidated into a phase evolution map. Aging kinetic was investigated by monitoring the variation of solution pH, following the determination of an apparent activation energy, which has a value as high as 10.35 kcal/mol, for the chemical reaction occurring upon aging. Optimal solution chemistry was elucidated based on the corresponding phase evolution map.

Sol-gel hydroxyapatite coatings on stainless steel substrates.

Thin film hydroxyapatite deposits onto sandblasted 316L stainless steel substrates were prepared using water-based sol-gel technique recently developed in our lab. The coatings were annealed in air at 375 degrees C, 400 degrees C, and 500 degrees C. Phase formation, surface morphology, interfacial microstructure, and interfacial bonding strength of the coatings were investigated. Apatitic structure developed within the coatings while annealing at temperatures > or = 400 degrees C, while those heat-treated at 375 degrees C showed poor crystallinity. The coatings were dense and firmly attached to the underlying substrates, reaching an average bonding strength (as determined through the pull-out test) of 44 MPa. Nano-porous structure was found for the coatings annealed at 500 degrees C, believed to result from grain growth, and causing a slight decrease in the bonding strength. Surface microcracking, although not extensive, occurred after annealing at temperatures > or = 400 degrees C, and was linked to non-uniform thickness of the coating due to roughness of the substrate. A contraction of the coatings as a result of sintering, and phase transition from amorphous (or poor crystalline) to reasonably good crystalline apatite, may be responsible for the loss of structural integrity of the thicker sections of the coatings. It seems quite promising that a dense and adhesive apatite coating can be achieved through water-based sol gel technology after short-term annealing at around 400 degrees C in air.

Structural evolution of sol-gel-derived hydroxyapatite.

Structural evolution upon transformation of sol to gel, and gel to final ceramic during the synthesis of hydroxyapatite is investigated using Fourier transform infrared (FTIR) analysis, X-ray diffraction (XRD), thermal behavior (DTA and TGA), and electron microscopy examination (SEM/TEM). The sol was first thermally aged at 45 C for various time periods up to 120 min. The colloidal sol, which may have an oligomeric structure, was relatively stable against coagulation. Upon drying, the sol particles consolidated into dry gel through van der Waals attraction, and showed X-ray amorphous phosphate structure. The solid gels showed a particulate microstructure, composed of primary particles of about 8-10 nm in diameter. The amorphous gel transformed into crystalline apatite at temperatures > 300 C. The calcined gels showed a nano-scale microstructure, with grains of 20-50 nm in diameter. Through an appropriate heat treatment between 300 and 400d degrees C. the apatite prepared using current process exhibits a nano-scale, low-crystallinity, carbonated apatitic structure, which closely resembles that of human bone apatite.

Synthesis and characterization of needlelike apatitic nanocomposite with controlled aspect ratios.

Calcium-deficient apatitic (cd-HA) crystals with core-shell nanostructure with needlelike shape, 5-10nm in diameter and 20-80nm in length, were prepared via an in situ formation in the presence of polyacrylic acid (PAA) under aqueous solution of different pH values, ranging from 9 to 11. Nanostructure of the resulting crystals showing a core-shell configuration with a thin layer of PAA shell of about 1nm thickness was investigated. Aspect ratio (AR) of the needlelike composite was found to depend on the concentration of the PAA and solution pH. At lower solution pH, crystal growth was inhibited, i.e., leading to a decreased AR, with increase of PAA concentration, while an increased AR was detected at higher solution pH, suggesting a preferential growth of the cd-HA nanocrystals. Mechanism of such preferential growth was tentatively proposed and is suggested to correct PAA adsorption along the long axis of the needlelike nanoparticles.

Influence of the aspect ratio of bioactive nanofillers on rheological behavior of PMMA-based orthopedic materials.

In this investigation, calcium-deficient hydroxyapatite (CDHA) nanocrystals with needle-like geometry were synthesized and incorporated with Poly(methyl methacrylate), PMMA, to form CDHA-PMMA nanocomposites. Rheological behaviors of the PMMA-CDHA melting suspensions were systematically investigated in terms of solid loading and aspect ratio of the CDHA nanoparticles. The maximum solid loadings of nano-CDHA particles with aspect ratios of 7.2, 10.4, and 17 were determined to be 28, 31, and 57%, respectively. An increase in solid concentrations causes pronounced shear-thinning behavior. This result suggests that a strong interaction, including Van der Waals attraction and mechanical interlocking, between the nano-CDHA particles makes the nanocomposite mixture more non-Newtonian. Furthermore, it was found that packing efficiency and yield strength in the suspension were strongly influenced by the aspect ratio, especially above the critical value of 8.8. The obtained critical aspect ratio and solid content provide not only appropriate design in the PMMA-CDHA polymeric suspension for fabrication process but also optimal conditions for the fabrication of orthopedic devices via injection molding or extrusion.

Synergistic hierarchical silicone-modified polysaccharide hybrid as a soft scaffold to control cell adhesion and proliferation.

In this study, a new type of polydimethylsiloxane-modified chitosan (PMSC) amphiphilic hydrogel was developed as a soft substrate to explore cellular responses for dermal reconstruction. The hydrogel wettability, mechanical stiffness and topography were controllable through manipulation of the degree of esterification (DE) between hydrophobic polydimethylsiloxane (PDMS) and hydrophilic N,O-(carboxymethyl)-chitosan (NOCC). Based on microphase separation, the incorporation of PDMS into NOCC increased the stiffness of the hybrid through the formation of self-assembled aggregates, which also provided anchor sites for cell adhesion. As the DE exceeded 0.39, the size of the PDMS-rich aggregates changed from nanoscale to microscale. Subsequently, the hierarchical architecture resulted in an increase in the tensile modulus of the hybrid gel up to fourfold, which simultaneously provided mechano-topographic guidance and allowed the cells to completely spread to form spindle shapes instead of forming a spherical morphology, as on NOCC (DE=0). The results revealed that the incorporation of hydrophobic PDMS not only impeded acidic damage resulting from NOCC but also acted as an adhesion modification agent to facilitate long-term cell adhesion and proliferation on the soft substrate. As proved by the promotion on long-term type-I collagen production, the PMSC hybrid with self-assembled mechano-topography offers great promise as an advanced scaffold material for use in healing applications.

Electrophoretic coating of amphiphilic chitosan colloids on regulating cellular behaviour.

In this communication, we report a facile nanotopographical control over a stainless steel surface via an electrophoretic deposition of colloidal amphiphilic chitosan for preferential growth, proliferation or migration of vascular smooth muscle cells (VSMCs) and human umbilical vein endothelial cells (HUVECs). Atomic force microscopy revealed that the colloidal surface exhibited a deposition time-dependent nanotopographical evolution, wherein two different nanotopographic textures indexed by 'kurtosis' (Rkur) value were easily designed, which were termed as 'sharp' (i.e. high peak-to-valley texture) surface and 'flat' (i.e. low peak-to-valley texture) surface. Cellular behaviour of VSMCs and HUVECs on both surfaces demonstrated topographically dependent morphogenesis, adherent responses and biochemical properties in comparison with bare stainless steel. The formation of a biofunctionalized surface upon a facile colloidal chitosan deposition envisions the potential application towards numerous biomedical devices, and this is especially promising for cardiovascular stents wherein a new surface with optimized texture can be designed and is expected to create an advantageous environment to stimulate HUVEC growth for improved healing performance.

Corneal repair by human corneal keratocyte-reprogrammed iPSCs and amphiphatic carboxymethyl-hexanoyl chitosan hydrogel.

Induced pluripotent stem cells (iPSCs) have promising potential in regenerative medicine, but whether iPSCs can promote corneal reconstruction remains undetermined. In this study, we successfully reprogrammed human corneal keratocytes into iPSCs. To prevent feeder cell contamination, these iPSCs were cultured onto a serum- and feeder-free system in which they remained stable through 30 passages and showed ESC-like pluripotent property. To investigate the availability of iPSCs as bioengineered substitutes in corneal repair, we developed a thermo-gelling injectable amphiphatic carboxymethyl-hexanoyl chitosan (CHC) nanoscale hydrogel and found that such gel increased the viability and CD44+proportion of iPSCs, and maintained their stem-cell like gene expression, in the presence of culture media. Combined treatment of iPSC with CHC hydrogel (iPSC/CHC hydrogel) facilitated wound healing in surgical abrasion-injured corneas. In severe corneal damage induced by alkaline, iPSC/CHC hydrogel enhanced corneal reconstruction by downregulating oxidative stress and recruiting endogenous epithelial cells to restore corneal epithelial thickness. Therefore, we demonstrated that these human keratocyte-reprogrammed iPSCs, when combined with CHC hydrogel, can be used as a rapid delivery system to efficiently enhance corneal wound healing. In addition, iPSCs reprogrammed from corneal surgical residues may serve as an alternative cell source for personalized therapies for human corneal damage.

Remotely nano-rupturable yolk/shell capsules for magnetically-triggered drug release.

Yolk/shell capsules containing a volume/hydrophobicity transformable core and an ultra-thin silica shell have been prepared. When an external magnetic field induced the temperature, the cores exhibit a significant triggering size shrinkage and the diameter decreases more than 10 times, causing solid shells destruction and physical collapse, leading to drug burst release.

Instantaneous drug delivery of magnetic/thermally sensitive nanospheres by a high-frequency magnetic field.

Novel dual-functional nanospheres composed of magnetic iron oxide nanoparticles embedded in a thermo-sensitive Pluronic F127 (F127) matrix were successfully synthesized by an in situ coprecipitation process. The nanospheres were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. Experimental observations indicated that the F127 was subjected to a rapid structural change when the magnetic phase caused rapid heating after a short exposure to a high-frequency magnetic field. During the field duration, considerable volume shrinkage of the nanospheres (2.3-fold diameter reduction) was detected. This has been translated to an instantaneous release of a drug, Doxorubicin (DOX), when the DOX was encapsulated within the nanospheres. Such a rapidly responsive release of the DOX from the nanospheres was due to an intimate contact between the nanomagnet and F127, where an effective thermal and mechanical transfer between core and shell phases efficiently took place in the presence of the magnetic field.