Half of the 18O enrichment of leaf sucrose is conserved in leaf cellulose of a C3 grass across atmospheric humidity and CO2 levels.

The 18O enrichment (Δ18O) of cellulose (Δ18OCel) is recognized as a unique archive of past climate and plant function. However, there is still uncertainty regarding the proportion of oxygen in cellulose (pex) that exchanges post-photosynthetically with medium water of cellulose synthesis. Particularly, recent research with C3 grasses demonstrated that the Δ18O of leaf sucrose (Δ18OSuc, the parent substrate for cellulose synthesis) can be much higher than predicted from daytime Δ18O of leaf water (Δ18OLW), which could alter conclusions on photosynthetic versus post-photosynthetic effects on Δ18OCel via pex. Here, we assessed pex in leaves of perennial ryegrass (Lolium perenne) grown at different atmospheric relative humidity (RH) and CO2 levels, by determinations of Δ18OCel in leaves, Δ18OLGDZW (the Δ18O of water in the leaf growth-and-differentiation zone) and both Δ18OSuc and Δ18OLW (adjusted for εbio, the biosynthetic fractionation between water and carbohydrates) as alternative proxies for the substrate for cellulose synthesis. Δ18OLGDZW was always close to irrigation water, and pex was similar (0.53 ± 0.02 SE) across environments when determinations were based on Δ18OSuc. Conversely, pex was erroneously and variably underestimated (range 0.02-0.44) when based on Δ18OLW. The photosynthetic signal fraction in Δ18OCel is much more constant than hitherto assumed, encouraging leaf physiological reconstructions.

δ13C of bulk organic matter and cellulose reveal post-photosynthetic fractionation during ontogeny in C4 grass leaves.

The 13C isotope composition (δ13C) of leaf dry matter is a useful tool for physiological and ecological studies. However, how post-photosynthetic fractionation associated with respiration and carbon export influences δ13C remains uncertain. We investigated the effects of post-photosynthetic fractionation on δ13C of mature leaves of Cleistogenes squarrosa, a perennial C4 grass, in controlled experiments with different levels of vapour pressure deficit and nitrogen supply. With increasing leaf age class, the 12C/13C fractionation of leaf organic matter relative to the δ13C of atmosphere CO2 (ΔDM) increased while that of cellulose (Δcel) was almost constant. The divergence between ΔDM and Δcel increased with leaf age class, with a maximum value of 1.6‰, indicating the accumulation of post-photosynthetic fractionation. Applying a new mass balance model that accounts for respiration and export of photosynthates, we found an apparent 12C/13C fractionation associated with carbon export of -0.5‰ to -1.0‰. Different ΔDM among leaves, pseudostems, daughter tillers, and roots indicate that post-photosynthetic fractionation happens at the whole-plant level. Compared with ΔDM of old leaves, ΔDM of young leaves and Δcel are more reliable proxies for predicting physiological parameters due to the lower sensitivity to post-photosynthetic fractionation and the similar sensitivity in responses to environmental changes.

Peptide-Based Coacervate Protocells with Cytoprotective Metal-Phenolic Network Membranes.

Protocells have garnered considerable attention from cell biologists, materials scientists, and synthetic biologists. Phase-separating coacervate microdroplets have emerged as a promising cytomimetic model because they can internalize and concentrate components from dilute surrounding environments. However, the membrane-free nature of such coacervates leads to coalescence into a bulk phase, a phenomenon that is not representative of the cells they are designed to mimic. Herein, we develop a membranized peptide coacervate (PC) with oppositely charged oligopeptides as the molecularly crowded cytosol and a metal-phenolic network (MPN) coating as the membrane. The hybrid protocell efficiently internalizes various bioactive macromolecules (e.g., bovine serum albumin and immunoglobulin G) (>90%) while also resisting radicals due to the semipermeable cytoprotective membrane. Notably, the resultant PC@MPNs are capable of anabolic cascade reactions and remain in discrete protocellular populations without coalescence. Finally, we demonstrate that the MPN protocell membrane can be postfunctionalized with various functional molecules (e.g., folic acid and fluorescence dye) to more closely resemble actual cells with complex membranes, such as recognition molecules, which allows for drug delivery. This membrane-bound cytosolic protocell structure paves the way for innovative synthetic cells with structural and functional complexity.

Self-Assembled Homopolymeric Spherulites from Small Molecules in Solution.

Polymeric spherulites are typically formed by melt crystallization: spherulitic growth in solution is rare and requires complex polymers and dilute solutions. Here, we report the mild and unique formation of luminescent spherulites at room temperature via the simple molecule benzene-1,4-dithiol (BDT). Specifically, BDT polymerized into oligomers (PBDT) via disulfide bonds and assembled into uniform supramolecular nanoparticles in aqueous buffer; these nanoparticles were then dissolved back into PBDT in a good solvent (i.e., dimethylformamide) and underwent chain elongation to form spherulites (rPBDT) in 10 min. The spherulite geometry was modulated by changing the PBDT concentration and reaction time. Due to the step-growth polymerization and reorganization of PBDT, these spherulites not only exhibited robust structure but also showed broad clusterization-triggered emission. The biocompatibility and efficient cellular uptake of the spherulites further underscore their value as traceable drug carriers. This system provides a new pathway for designing versatile superstructures with value for hierarchical assembly of small molecules into a complicated biological system.

A Reverse Orbicularis-Tarsus Fixation Technique in Double-Eyelid Blepharoplasty: A Novel Fixation Technique Different From Park's Technique.

BACKGROUND: Although Park's "orbicularis-levator fixation technique" has been widely used as a mature double-eyelid surgery in China recently. Shortcomings related to this method cannot be ignored. Thus, a reverse orbicularis-tarsus fixation technique in double-eyelid blepharoplasty has now been devised. The method is to create a physiological double-eyelid fold based on the formation mechanism of double-eyelid creases. METHODS: A retrospective study of 112 Chinese patients who underwent double-eyelid surgery between October 2017 and September 2019 was undertaken through a review of medical records. All these patients underwent a reverse tarsus and orbicularis oculi muscle fixation technique, with postoperative follow-up ranging from 6 months to 2 years. Postoperative outcomes were reviewed, evaluated, and analyzed. RESULTS: Altogether, 112 patients who underwent the double-eyelid surgery were reviewed. Among them, the results were judged as excellent in 104 cases (92.9%), good in 4 cases (3.6%), fair in 3 cases (2.7%), and poor in 1 case (0.8%). Clinical effectiveness was satisfactory in most of the patients (104/112, 92.9%). Only 5 patients (4.5%) expressed subjective dissatisfaction with postoperative outcomes; of these, 3 patients complained of eyelids asymmetry (2.7%). Two patients complained of eyelids scar formation (1.7%); Whereas surgical revision was required in only 1 patient (0.8%). CONCLUSIONS: The reverse orbicularis-tarsus fixation technique for upper eyelid blepharoplasty is safe and effective, with better biomechanics and a satisfying aesthetic outcome. Therefore, this provides an alternative option in Chinese double-eyelid surgery.Level of Evidence: Level IV, case studies.

ENO1-targeted superparamagnetic iron oxide nanoparticles for detecting pancreatic cancer by magnetic resonance imaging.

The aim of this study was to investigate in vitro magnetic resonance imaging (MRI) of PDAC using ENO1-targeted superparamagnetic iron oxide nanoparticles and xenograft models. Expression level and location of ENO1 protein in pancreatic cancer cell lines of CFPAC-1 and MiaPaCa-2 were detected by Western blotting, flow cytometry and confocal microscopy. Dex-g-PCL/SPIO nanoparticles targeting ENO1 were constructed with ENO1 antibody and characterized by MRI. In addition, ENO1-Dex-g-PCL/SPIO nanoparticles were tested to assess their efficacy on the detection of PDAC using in vitro and in vivo MRI. The results showed that ENO1 was expressed in both human PDAC cell lines of CFPAC-1 and MiaPaCa-2, demonstrating that the localization of cytoplasm and membrane was dominant. It was confirmed that ENO1 antibody was connected to the SPIO surface in ENO1-Dex-g-PCL/SPIO nanoparticles. The nanoparticles had satisfactory superparamagnetism and significantly enhance the detection of PDAC by in vivo and in vitro MRI. In conclusion, ENO1 can serve as a membrane protein expressed on human PDAC cell lines. ENO1-targeted SPIO nanoparticles using ENO1 antibody can increase the efficiency of detection of PDAC by in vitro and in vivo MRI.

Preparation of PVDF/CdS/Bi2WO6/ZnO hybrid membrane with enhanced visible-light photocatalytic activity for degrading nitrite in water.

In this work, a visible light-driven ternary heterojunction photocatalyst, CdS/Bi2WO6/ZnO, was synthesized using hydrothermal, ultrasonic dispersion, and deposition precipitation methods. The results show that photocatalysts with flower-like heterostructures were obtained, which could efficiently separate electron-hole pairs, and the photocatalytic activity was thereby significantly enhanced. Furthermore, CdS/Bi2WO6/ZnO and polyvinylidene fluoride (PVDF) were used to fabricate hybrid membranes via a phase-conversion method. The samples were characterized using SEM, TEM, EDX, XRD, DRS, XPS, PL, and N2 adsorption-desorption isotherms, and the transient photocurrent response. The photocatalytic activity of the hybrid membrane was evaluated, and 92.58% of the nitrite was converted into non-toxic substances within 4 h under simulated sunlight irradiation. This result indicated that the photocatalyst exhibited a good photocatalytic activity after immobilization. The possible mechanism was elucidated by studying the product during the photocatalytic degradation, and the effects of different pH values, electron scavengers, and hole scavengers on the photocatalytic performance were further investigated.

Carbon Fiber-Based Flow-Through Electrode System (FES) for Water Disinfection via Direct Oxidation Mechanism with a Sequential Reduction-Oxidation Process.

Flow-through configuration for electrochemical disinfection is considered as a promising approach to minimize the formation of toxic byproducts and energy consumption via the enhanced convective mass transport as compared with conventional flow-by one. Under this hydrodynamic condition, it is essential to ascertain the effect of sequential electro-redox processes with the cathode/anode then anode/cathode arrangements on disinfection performance. Here, carbon fiber felt (CFF) was utilized to construct two flow-through electrode systems (FESs) with sequential reduction-oxidation (cathode-anode) or oxidation-reduction (anode-cathode) processes to systematically compare their disinfection performance toward a model Escherichia coli ( E. coli) pathogen. In-situ sampling and live/dead backlight staining experiments revealed that E. coli inactivation mainly occurred on anode via an adsorption-inactivation-desorption process. In reduction-oxidation system, after the cathode-pretreatment, bulk solution pH increased significantly, leading to the negative charge of E. coli cells. Hence, E. coli cells were adsorbed and inactivated easily on the subsequent anode, finally resulting in its much better disinfection performance and energy efficiency than the oxidation-reduction system. Application of 3.0 V resulted in ∼6.5 log E. coli removal at 1500 L m-2 h-1 (50 mL min-1), suggesting that portable devices can be designed from CFF-based FES with potential application for point-of-use water disinfection.

A Microfluidic Strategy for Controllable Generation of Water-in-Water Droplets as Biocompatible Microcarriers.

Droplet microfluidics has been widely applied in functional microparticles fabricating, tissue engineering, and drug screening due to its high throughput and great controllability. However, most of the current droplet microfluidics are dependent on water-in-oil (W/O) systems, which involve organic reagents, thus limiting their broader biological applications. In this work, a new microfluidic strategy is described for controllable and high-throughput generation of monodispersed water-in-water (W/W) droplets. Solutions of polyethylene glycol and dextran are used as continuous and dispersed phases, respectively, without any organic reagents or surfactants. The size of W/W droplets can be precisely adjusted by changing the flow rate of dispersed and continuous phases and the valve switch cycle. In addition, uniform cell-laden microgels are fabricated by introducing the alginate component and rat pancreatic islet (ß-TC6) cell suspension to the dispersed phase. The encapsulated islet cells retain high viability and the function of insulin secretion after cultivation for 7 days. The high-throughput droplet microfluidic system with high biocompatibility is stable, controllable, and flexible, which can boost various chemical and biological applications, such as bio-oriented microparticles synthesizing, microcarriers fabricating, tissue engineering, etc.

Promoting Immune Efficacy of the Oral Helicobacter pylori Vaccine by HP55/PBCA Nanoparticles against the Gastrointestinal Environment.

The immunogenicity of oral subunit vaccines is poor partly as a result of the harsh milieu of the gastrointestinal (GI) tract. For some pathogens that restrictedly inhabit the GI tract, a vaccine that works in situ may provide more potent protection than vaccines that operate parenterally. Yet, no appropriate delivery system is available for oral subunit vaccines. In this study, we designed HP55/poly( n-butylcyanoacrylate) (PBCA) nanoparticles (NPs) to carry Helicobacter pylori ( H. pylori) subunit vaccine CCF for oral administration in a prophylactic mice model. These NPs, which are synthesized using an interfacial polymerization method, protected the CCF antigen not only from the acidic pH in simulated gastric fluid (SGF, pH 1.2) but also from the proteolysis in simulated intestinal fluid (SIF, pH 7.4). Oral vaccination of mice with HP55/PBCA-CCF NPs promoted the production of serum antigen-specific antibodies, mucosal secretory IgA, and proinflammatory cytokines. Moreover, a Th1/Th17 response and augmented lymphocytes were found in the gastric tissue of HP55/PBCA-CCF NP-immunized mice, which might eventually limit H. pylori colonization. Collectively, these results indicate that HP55/PBCA NPs are promising carriers against the severe situation of the GI tract and thereby may be further utilized for other orally administrated vaccines or drugs.

The δ18 O and δ2 H of water in the leaf growth-and-differentiation zone of grasses is close to source water in both humid and dry atmospheres.

The oxygen and hydrogen isotope composition of water in the leaf growth-and-differentiation zone, LGDZ, (δ18 OLGDZ , δ2 HLGDZ ) of grasses influences the isotopic composition of leaf cellulose (oxygen) and wax (hydrogen) - important for understanding (paleo)environmental and physiological information contained in these biological archives - but is presently unknown. This work determined δ18 OLGDZ and δ2 HLGDZ , 18 O- and 2 H-enrichment of LGDZ (∆18 OLGDZ and ∆2 HLGDZ ), and the 18 O- and 2 H-enrichment of leaf blade water (∆18 OLW, ∆2 HLW ) in two C3 and three C4 grasses grown at high and low vapor pressure deficit (VPD). The proportion of unenriched water (px ) in the LGDZ ranged from 0.9 to 1.0 for 18 O and 1.0 to 1.2 for 2 H. VPD had no effect on the proportion of 18 O- and 2 H-enriched water in the LGDZ, and species effects were small or nonsignificant. Deuterium discrimination caused depletion of 2 H in LGDZ water, increasing (apparent) px -values > 1.0 in some cases. The isotopic composition of water in the LGDZ was close to that of source water, independent of VPD and much less enriched than previously supposed, but similar to reported xylem water in trees. The well-constrained px will be useful in future investigations of oxygen and hydrogen isotopic fractionation during cellulose and wax synthesis, respectively.

An oxygen isotope chronometer for cellulose deposition: the successive leaves formed by tillers of a C4 perennial grass.

Multiannual time series of (palaeo)hydrological information can be reconstructed from the oxygen isotope composition of cellulose (δ18 OCel ) in biological archives, for example, tree rings, but our ability to temporally resolve information at subannual scale is limited. We capitalized on the short and predictable leaf appearance interval (2.4 d) of a perennial C4 grass (Cleistogenes squarrosa), to assess its potential for providing highly time-resolved δ18 OCel records of vapour pressure deficit (VPD). Plants grown at low (0.63 kPa) or high (1.58 kPa) VPD were swapped between VPD environments and exposed to the new environment for 7 d with simultaneous 13 CO2 labelling. Then, leaves were sampled by age/position along individual tillers. Five leaves at different developmental stages were growing simultaneously. The period of most-active leaf elongation, from 10 to 90% of final length, lasted 6.6 d, and ~80% of all carbon and oxygen incorporation in whole-leaf cellulose occurred within 7 d. Cellulose deposition stopped at (or shortly after) full leaf expansion. The direction of change, low-to-high or high-to-low VPD, had no differential effect on new oxygen and carbon incorporation in cellulose. Successive leaves produced by tillers of C. squarrosa provide a δ18 OCel record useful for reconstructions of short-term hydrological dynamics.

Single-Stage Reconstruction of Eyebrow Defect Using a V-Y Advancement Pedicle Flap Based on the Orbicularis Oculi Muscle.

Eyebrows play an important role in face expression and facial mimics by virtue of muscle contraction. Defects or deformity of the eyebrows result in abnormal facial expressions, and may lead to aesthetic issues for patients. The objective of this study is to report the case of a patient, with a congenital skin pigmented nevus at the right side of the eyebrow treated with direct surgical resection and followed by immediate reconstruction of the eyebrow with a V-Y advancement pedicle flap based on the orbicularis oculi muscle.

Behavioral and cardiopulmonary effects of dexmedetomidine-midazolam and dexmedetomidine-midazolam-butorphanol in the silver fox (Vulpes vulpes).

OBJECTIVE: To evaluate the behavior and some cardiopulmonary variables of dexmedetomidine-midazolam or dexmedetomidine-midazolam-butor-phanol in the silver fox (Vulpes vulpes). STUDY DESIGN: Blinded, randomized design. ANIMALS: Sixteen adult silver foxes, aged 7-9 months, weighting 6.0-9.2 kg. METHODS: Animals were randomly assigned to dexmedetomidine (50 µg kg-1) and midazolam (0.45 mg kg-1) (group DM) or to dexmedetomidine (30 µg kg-1), midazolam (0.45 mg kg-1) and butorphanol (0.25 mg kg-1) (group DMB), administered intramuscularly. Pulse rate (PR), respiratory rate (fR), noninvasive arterial pressures, oxygen saturation (SpO2), rectal temperature (T) and behavioral scores (posture, sedation, antinociception, jaw relaxation and auditory response) were measured at 5, 10, 20, 30, 40, 50 and 60 minutes after injection. Time from drug injection to recumbency with no response to stimuli (IT) and time from administration of atipamezole (0.2 mg kg-1) to standing with coordination (RT) were recorded. The occurrences of adverse events were recorded. Data were analyzed by two-tailed unpaired t-tests and Bonferroni post hoc tests. Significant differences were accepted at p<0.05. RESULTS: There were no statistically significant differences between the groups for IT or RT. Arterial pressures were higher in DMB at each time point except at 5 minutes. PR was lower in DM at each time point except at 10 and 60 minutes. No significant difference was found between the groups for fR, SpO2 and T. The behavioral scores were significantly lower (lower quality immobilization) in DMB at 5,10 and 60 minutes. CONCLUSIONS AND CLINICAL RELEVANCE: IT and RT were not different between the groups. Both protocols provided immobilization for 30-40 minutes with excellent muscle relaxation and analgesia adequate for clinical examinations and some simple surgical procedures.

Efficacy of combined orthodontic-periodontic treatment for patients with periodontitis and its effect on inflammatory cytokines: A comparative study.

INTRODUCTION: In this study, we aimed to investigate the efficacy of combined orthodontic-periodontic treatment in the treatment of patients with periodontitis and its effects on the levels of inflammatory cytokines. METHODS: A total of 117 patients with periodontitis were randomly assigned to the basic group (receiving basic periodontic treatment, n = 58) and the combined group (receiving combined orthodontic-periodontic treatment, n = 59). In addition, 52 healthy people without periodontal disease were selected as the normal group. Probing depth, tooth mobility, plaque index, clinical attachment level, and sulcus bleeding index were recorded. ELISA was applied to detect gingival crevicular fluid (GCF) and serum levels of inflammatory cytokines. A 2-year clinical follow-up was conducted. RESULTS: Before treatment, the periodontal parameters (probing depth, tooth mobility, plaque index, clinical attachement level, and sulcus bleeding index) and GCF and serum levels of inflammatory cytokines (high-sensitivity C-reactive protein, interleukin-1ß, interleukin-5, interleukin-6, interleukin-8, tumor necrosis factor-α, and prostaglandin E2) in the combined and basic groups were higher than those in the normal group. After 6 and 18 months of treatment, the periodontal parameters and GCF and serum levels of inflammatory cytokines decreased in the combined and basic groups. The periodontal parameters and the GCF and serum levels of inflammatory cytokines in the combined group were significantly lower than those in the basic group after 18 months of treatment. The combined group had a lower recurrence rate compared with the basic group. CONCLUSIONS: Combined orthodontic-periodontic treatment had good clinical efficacy in the treatment of periodontitis and could effectively decrease the levels of inflammatory cytokines.

Nitrogen fertilization and δ18 O of CO2 have no effect on 18 O-enrichment of leaf water and cellulose in Cleistogenes squarrosa (C4 ) - is VPD the sole control?

The oxygen isotope composition of cellulose (δ18 OCel ) archives hydrological and physiological information. Here, we assess previously unexplored direct and interactive effects of the δ18 O of CO2 (δ18 OCO2 ), nitrogen (N) fertilizer supply and vapour pressure deficit (VPD) on δ18 OCel , 18 O-enrichment of leaf water (Δ18 OLW ) and cellulose (Δ18 OCel ) relative to source water, and pex px , the proportion of oxygen in cellulose that exchanged with unenriched water at the site of cellulose synthesis, in a C4 grass (Cleistogenes squarrosa). δ18 OCO2 and N supply, and their interactions with VPD, had no effect on δ18 OCel , Δ18 OLW , Δ18 OCel and pex px . Δ18 OCel and Δ18 OLW increased with VPD, while pex px decreased. That VPD-effect on pex px was supported by sensitivity tests to variation of Δ18 OLW and the equilibrium fractionation factor between carbonyl oxygen and water. N supply altered growth and morphological features, but not 18 O relations; conversely, VPD had no effect on growth or morphology, but controlled 18 O relations. The work implies that reconstructions of VPD from Δ18 OCel would overestimate amplitudes of VPD variation, at least in this species, if the VPD-effect on pex px is ignored. Progress in understanding the relationship between Δ18 OLW and Δ18 OCel will require separate investigations of pex and px and of their responses to environmental conditions.

Mechanism of pretreatment using magnetic poly(glycidyl methacrylate) resin in an ultrafiltration membrane system used in algae-rich water treatment.

Ultrafiltration (UF) membrane fouling brought by algae-rich water controlling has been the research focus in recent years. The pretreatment of magnetic poly(glycidyl methacrylate) (m-PGMA) for sedimental tank effluent was investigated as well as its performance in combined UF processes. The optimal dose of m-PGMA was found to be 5 mL/L, which can bring a significant improvement to the removal efficiency of natural organic matter. With regards to membrane fouling, the use of m-PGMA also resulted in lowered irreversible and reversible membrane resistances in comparison with results obtained when operating without m-PGMA. In addition, four classic filtration models were introduced to analyse the fouling mechanisms. The proportion of standard blocking of pores has been weakened in the mechanism of membrane fouling when the pretreatment of m-PGMA exists. A very loose cake layer and relieved pore blockage were observed by scanning electron microscopy during m-PGMA/UF process.

Bioactivity of porous biphasic calcium phosphate enhanced by recombinant human bone morphogenetic protein 2/silk fibroin microsphere.

To prepare a bioactive bone substitute, which integrates biphasic calcium phosphate (BCP) and rhBMP-2/silk fibroin (SF) microsphere, and to evaluate its characteristics. Hydroxyapatite and ß-tricalcium phosphate were integrated with a ratio of 60­40%. RhBMP-2/SF (0.5 µg/1 mg) microsphere was prepared, and its rhBMP-2-release kinetics was assed. After joining pore-forming agent (Sodium chloride, NaCl), porous BCP/rhBMP-2/SF were manufactured, and its characteristics and bioactivity in vitro were evaluated. Mean diameter of rhBMP-2/SF microsphere was 398.7 ± 99.86 nm, with a loading rate of 4.53 ± 0.08%. RhBMP-2 was released in a dual-phase pattern, of which fast-release (nearly half of protein released) focused on the initial 3 days, and slow-release sustained more than 28 days. With the increase in concentration of NaCl, greater was porosity and pore size, but smaller mechanical strength of BCP/rhBMP-2/SF. Material with 150% (w/v) NaCl had an optimal performance, with a porosity of 78.83%, pore size of 293.25 ± 42.77µm and mechanical strength of 31.03 MPa. Proliferation of human placenta-derived mesenchymal stem cells (hPMSCs) on leaching extract medium was similar to the normal medium (P = 0.89), which was better than that on control group (P = 0.03). Activity of alkaline phosphatase on BCP/rhBMP-2/SF surface was higher than on pure BCP at each time point except at 1 day (P < 0.05). RhBMP-2 has a burst release on early times and a sustaining release on later times. BCP/rhBMP-2/SF with 150% (w/v) pore-forming agent has excellent porosity, pore size and mechanical strength. The biomaterial induces proliferation and differentiation hPMSCs effectively.

Visible light-promoted anti-biofouling performance of cellulose acetate membrane for reverse osmosis desalination.

Sea water desalination is regarded as a major solution that could alleviate the water scarcity problem. Reverse osmosis (RO) is typically employed to recover fresh water from sea and brackish water via economical means. RO membrane fouling remains a critical issue restricting their widespread application. In this work, a tertiary thiophenal quaternary ammonium salt-based antibacterial agent was covalently reacted with cellulose acetate (CA) to obtain contact-active antibacterial quaternized CA-RO membrane (QCA-RO). The membrane was characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, water contact angle testing, and X-ray diffraction spectroscopy. The obtained QCA-RO membrane displayed good antibacterial activity against Pseudomonas aeruginosa and Staphylococcus aureus and had bactericidal rates of 99 % in the presence of visible light. Results showed that embedding the quaternary ammonium salt did not cause any significant changes to the morphology, mechanical performance, and thermal stability of the RO membrane. The method described in this work not only produces QCA-RO membranes with good anti-biofilm performance but also presents great potential in seawater desalination.

Quaternized chitosan/polyvinyl alcohol anion exchange membrane enhanced by functionalized attapulgite clay with an ionic "chain-ball" surface structure.

Biomass chitosan has garnered considerable interest for alkaline anion exchange membranes (AEMs) due to its eco-friendly and sustainable characteristics, low reactant permeability and easily modifiable nature, but it still faces the trade-off between high hydroxide conductivity and sufficient mechanical properties. Herein, a novel functionalized attapulgite clay (f-ATP) with a unique ionic "chain-ball" surface structure was prepared and incorporated with quaternized chitosan (QCS)/polyvinyl alcohol (PVA) matrix to fabricate high-performance composite AEMs. Due to the strengthened interfacial bonding between f-ATP nanofillers and the QCS/PVA matrix, composite membranes are synergistically reinforced and toughened, achieving peak tensile strength and elongation at break of 24.62 MPa and 33.8 %. Meanwhile, abundant ion pairs on f-ATP surface facilitate ion transport in the composite AEMs, with the maximum OH- conductivity of 46 mS cm-1 at 80 °C and the highest residual IEC of 83 % after alkaline treatment for 120 h. Moreover, the assembled alkaline direct methanol fuel cell exhibits a remarkable power density of 49.3 mW cm-2 at 80 °C. This work provides a new strategy for fabricating high-performance anion exchange membranes.