A Novel Multiarmed Bifunctional PEG Derivative for the Preparation of Mass Spectrometry Ion Sources with Antifouling Property and High Selectivity.

It is challenging to prepare a highly selective mass spectrometry (MS) ion source for the rapid and highly sensitive detection of analytes, especially mycotoxins. In this study, an amino and tetrazine bifunctionalized multiarm PEG derivative (NH2HCl-4armPEG10K-(MTz)3), which can be easily immobilized on the substrate by the addition reaction between amino and polydopamine, was used for the preparation of MS ionization substrate. NH2HCl-4armPEG10K-(MTz)3 can also be used as a linker to immobilize sufficient streptavidin (SA) on the surface of the substrate by a click reaction. The process further promotes the immobilization of broad-spectrum antibodies (3D4), which were used as the recognition element for ZEN and its metabolites. The prepared SSS-Au-PDA-4armPEG10K-SA-3D4 not only can rapidly enrich ZEN and its metabolites with high selectivity but also shows good antifouling properties in the matrix. After simple sample preparation, the prepared SSS-Au-PDA-4armPEG10K-SA-3D4 can be directly coupled with MS to achieve high sensitivity (LODs: 0.18-0.66 ng/mL, LOQs: 0.5-1.0 ng/mL) and selective detection of ZEN and its metabolites in the matrix. At the same time, satisfactory recoveries (83.60-97.80%) and precision (RSD: 2.80-9.10%) can also be obtained. The prepared SSS-Au-PDA-4armPEG10K-SA-3D4 is expected to provide a powerful tool for the rapid and highly sensitive determination of multiple targets by MS.

Identification and characterization of a fungal cutinase-like enzyme CpCut1 from Cladosporium sp. P7 for polyurethane degradation.

Plastic degradation by biological systems emerges as a prospective avenue for addressing the pressing global concern of plastic waste accumulation. The intricate chemical compositions and diverse structural facets inherent to polyurethanes (PU) substantially increase the complexity associated with PU waste management. Despite the extensive research endeavors spanning over decades, most known enzymes exhibit a propensity for hydrolyzing waterborne PU dispersion (i.e., the commercial Impranil DLN-SD), with only a limited capacity for the degradation of bulky PU materials. Here, we report a novel cutinase (CpCut1) derived from Cladosporium sp. P7, which demonstrates remarkable efficiency in the degrading of various polyester-PU materials. After 12-h incubation at 55°C, CpCut1 was capable of degrading 40.5% and 20.6% of thermoplastic PU film and post-consumer foam, respectively, while achieving complete depolymerization of Impranil DLN-SD. Further analysis of the degradation intermediates suggested that the activity of CpCut1 primarily targeted the ester bonds within the PU soft segments. The versatile performance of CpCut1 against a spectrum of polyester-PU materials positions it as a promising candidate for the bio-recycling of waste plastics.IMPORTANCEPolyurethane (PU) has a complex chemical composition that frequently incorporates a variety of additives, which poses significant obstacles to biodegradability and recyclability. Recent advances have unveiled microbial degradation and enzymatic depolymerization as promising waste PU disposal strategies. In this study, we identified a gene encoding a cutinase from the PU-degrading fungus Cladosporium sp. P7, which allowed the expression, purification, and characterization of the recombinant enzyme CpCut1. Furthermore, this study identified the products derived from the CpCut1 catalyzed PU degradation and proposed its underlying mechanism. These findings highlight the potential of this newly discovered fungal cutinase as a remarkably efficient tool in the degradation of PU materials.

Melatonin-mediated malic enzyme 2 orchestrates mitochondrial fusion and respiratory functions to promote odontoblastic differentiation during tooth development.

Tooth development is a complex process that is tightly controlled by circadian rhythm. Melatonin (MT) is a major hormonal regulator of the circadian rhythm, and influences dentin formation and odontoblastic differentiation during tooth development; however, the underlying mechanism remains elusive. This study investigated how MT regulates odontoblastic differentiation, with a special focus on its regulation of mitochondrial dynamics. In rat dental papilla cells (DPCs), we found that MT promotes odontoblastic differentiation concurrently with enhanced mitochondrial fusion, while disruption of mitochondrial fusion by depleting optic atrophy 1 (OPA1) impairs MT-mediated differentiation and mitochondrial respiratory functions. Through RNA sequencing, we discovered that MT significantly upregulated malic enzyme 2 (ME2), a mitochondrial NAD(P)+ -dependent enzyme, and identified ME2 as a critical MT downstream effector that orchestrates odontoblastic differentiation, mitochondrial fusion, and respiration functions. By detecting the spatiotemporal expression of ME2 in developing tooth germs, and using tooth germ reconstituted organoids, we also provided in vivo and ex vivo evidence that ME2 promotes dentin formation, indicating a possible involvement of ME2 in MT-modulated tooth development. Collectively, our findings offer novel understandings regarding the molecular mechanism by which MT affects cell differentiation and organogenesis, meanwhile, the critical role of ME2 in MT-regulated mitochondrial functions is also highlighted.

Promotive Effect of FBXO32 on the Odontoblastic Differentiation of Human Dental Pulp Stem Cells.

Odontoblastic differentiation of human dental pulp stem cells (hDPSCs) is crucial for the intricate formation and repair processes in dental pulp. Until now, the literature is not able to demonstrate the role of ubiquitination in the odontoblastic differentiation of hDPSCs. This study investigated the role of F-box-only protein 32 (FBXO32), an E3 ligase, in the odontoblastic differentiation of hDPSCs. The mRNA expression profile was obtained from ribonucleic acid sequencing (RNA-Seq) data and analyzed. Immunofluorescence and immunohistochemical staining identify the FBXO32 expression in human dental pulp and hDPSCs. Small-hairpin RNA lentivirus was used for FBXO32 knockdown and overexpression. Odontoblastic differentiation of hDPSCs was determined via alkaline phosphatase activity, Alizarin Red S staining, and mRNA and protein expression levels were detected using real-time quantitative polymerase chain reaction and Western blotting. Furthermore, subcutaneous transplantation in nude mice was performed to evaluate the role of FBXO32 in mineralization in vivo using histological analysis. FBXO32 expression was upregulated in the odontoblast differentiated hDPSCs as evidenced by RNA-Seq data analysis. FBXO32 was detected in hDPSCs and the odontoblast layer of the dental pulp. Increased FBXO32 expression in hDPSCs during odontoblastic differentiation was confirmed. Through lentivirus infection method, FBXO32 downregulation in hDPSCs attenuated odontoblastic differentiation in vitro and in vivo, whereas FBXO32 upregulation promoted the hDPSCs odontoblastic differentiation, without affecting proliferation and migration. This study demonstrated, for the first time, the promotive role of FBXO32 in regulating the odontoblastic differentiation of hDPSCs, thereby providing novel insights into the regulatory mechanisms during odontoblastic differentiation in hDPSCs.

Synthesis of Hierarchically Porous Bioactive Glass and Its Mineralization Activity.

Mesoporous bioactive glass is a promising biomaterial for bone tissue engineering due to its good biocompatibility and bioactivity. In this work, we synthesized a hierarchically porous bioactive glass (HPBG) using polyelectrolyte-surfactant mesomorphous complex as template. Through the interaction with silicate oligomers, calcium and phosphorus sources were successfully introduced into the synthesis of hierarchically porous silica, and HPBG with ordered mesoporous and nanoporous structures was obtained. The morphology, pore structure and particle size of HPBG can be controlled by adding block copolymer as co-template or adjusting the synthesis parameters. The ability to induce hydroxyapatite deposition in simulated body fluids (SBF) demonstrated the good in vitro bioactivity of HPBG. Overall, this work provides a general method for the synthesis of hierarchically porous bioactive glasses.

A Molecularly Imprinted Electrochemical Sensor Based on TiO2@Ti3C2Tx for Highly Sensitive and Selective Detection of Chlortetracycline.

In view of the serious side effects of chlortetracycline (CTC) on the human body, it is particularly important to develop rapid, sensitive, and selective technologies for the detection of CTC in food. In this work, a molecularly imprinted electrochemical sensor with [Fe(CN)6]3-/4- as signal probe was proposed for the highly sensitive and selective detection of CTC. For this purpose, TiO2, which acts as an interlayer scaffold, was uniformly grown on the surface of Ti3C2Tx sheets through a simple two-step calcination process using Ti3C2Tx as the precursor to effectively avoid the stacking of Ti3C2Tx layers due to hydrogen bonding and van der Waals forces. This endowed TiO2@Ti3C2Tx with large specific surface, abundant functional sites, and rapid mass transfer. Then, polypyrrole molecularly imprinted polymers (MIPs) with outstanding electrical conductivity were modified on the surface of TiO2@Ti3C2Tx via simple electro-polymerization, where the pyrrole was employed as a polymeric monomer and the CTC provided a source of template molecules. This will not only provide specific recognition sites for CTC, but also facilitate electron transport on the electrode surface. The synergistic effects between TiO2@Ti3C2Tx and polypyrrole MIPs afforded the TiO2@Ti3C2Tx/MIP-based electrochemical sensor excellent detection properties toward CTC, including ultra-low limits of detection (LOD) (0.027 nM), a wide linear range (0.06-1000 nM), and outstanding stability, reproducibility, selectivity, and feasibility in real samples. The results indicate that this strategy is feasible and will broaden the horizon for highly sensitive and selective detection of CTC.

Hierarchically Porous Mesostructured Polydopamine Nanospheres and Derived Carbon for Supercapacitors.

Polydopamine (PDA), with similar chemical and physical properties to eumelanin, is a typical artificial melanin material. With various functional groups, good biocompatibility, and photothermal conversion ability, PDA attracts great interest and is extensively studied. Endowing PDA with a porous structure would increase its specific surface area, therefore would significantly improve its performance in different application fields. However, creating abundant pores within the PDA matrix is a great challenge. Herein, a self-assembly/etching method is proposed to prepare hierarchically porous mesostructured PDA nanospheres. The oxidative polymerization of dopamine and hydrolysis of tetraethyl orthosilicate were coupled to co-assemble with a polyelectrolyte-surfactant complex template to form a mesostructured PDA/silicate nanocomposite. After removing templates and etching of silica, hierarchically porous PDA nanospheres were obtained with specific surface area and pore volume as high as 302 m2 g-1 and 0.67 cm3 g-1, respectively. Moreover, via subsequent carbonization and silica-etching, ordered mesoporous N-doped carbon microspheres (OMCMs) with ∼2 nm ordered mesopores and ∼20 nm secondary nanopores could be obtained. When used as electrodes of supercapacitors, the OMCMs exhibited a specific capacity of 341 F g-1 at 1 A g-1 with excellent rate capability, and the OMCM-based symmetric supercapacitor delivered a high energy density of 14.1 W h kg-1 at a power density of 250 W kg-1 and minor capacitance fading (only 2.6%) after 10,000 cycles at 2 A g-1.

A Retrospective Study of 105 Patients with Elastolytic Giant Cell Granuloma and a Proposal for a New Clinical Classification.

Elastolytic giant cell granuloma, an idiopathic granulomatous dermatosis, is characterized by annular plaques on sun-exposed areas, and has been termed actinic granuloma or annular elastolytic giant cell granuloma. Many atypical clinical manifestations and lesions involving sun-protected areas have been reported. The aims of this retrospective study of 105 patients were to summarize the clinical and histological features of patients with this condition; to provide evidence for the viewpoint that elastolytic giant cell granuloma is a better term to include all clinical morphological types presenting with elastolysis, elastophagocytosis, and an infiltrate of multinucleated giant cells histologically; and to establish a new clinical classification. The varying clinical manifestations were further categorized into annular, papular, giant, mixed and generalized forms. The pathological manifestations were classified into giant cell, necrobiotic, histiocytic, sarcoidal and mixed patterns. Diabetes mellitus or impaired glucose tolerance were the most commonly identified comorbidities. Oral low-dose corticosteroid may be an effective treatment.

Systematic Evaluation of Different Coating Chemistries Used in Thin-Film Microextraction.

A systematic evaluation of eight different coatings made of solid phase extraction (SPE) and carbon-based sorbents immobilized with polyacrylonitrile in the thin-film microextraction (TFME) format using LC-MS/MS was described. The investigated coatings included graphene, graphene oxide, multi-walled carbon nanotubes (MWCNTs), carboxylated MWCNTs, as carbon-based coatings, and polystyrene-divinylbenzene (PS-DVB), octadecyl-silica particles (C18), hydrophilic-hydrophobic balance particles (HLB) and phenyl-boronic acid modified particles (PBA), as SPE-based coatings. A total of 24 compounds of diverse moieties and of a wide range of polarities (log P from -2.99 to 6.98) were selected as probes. The investigated coatings were characterized based on their extraction performance toward the selected probes at different pH values and at optimized desorption conditions. In the case of SPE-based coatings, PS-DVB and HLB exhibited a balanced extraction for compounds within a wide range of polarities, and C18 showed superior extraction recoveries for non-polar analytes. Carbon-based coatings showed high affinity for non-polar compounds given that their main driving force for extraction is hydrophobic interactions. Interestingly, among the studied carbon-based coatings, graphene oxide showed the best extraction capabilities toward polar compounds owing to its oxygen-containing groups. Overall, this work provided important insights about the extraction mechanisms and properties of the investigated coatings, facilitating the coating selection when developing new TFME applications.

Electrochemical energy storage devices for wearable technology: a rationale for materials selection and cell design.

Compatible energy storage devices that are able to withstand various mechanical deformations, while delivering their intended functions, are required in wearable technologies. This imposes constraints on the structural designs, materials selection, and miniaturization of the cells. To date, extensive efforts have been dedicated towards developing electrochemical energy storage devices for wearables, with a focus on incorporation of shape-conformable materials into mechanically robust designs that can be worn on the human body. In this review, we highlight the quantified performances of reported wearable electrochemical energy storage devices, as well as their micro-sized counterparts under specific mechanical deformations, which can be used as the benchmark for future studies in this field. A general introduction to the wearable technology, the development of the selection and synthesis of active materials, cell design approaches and device fabrications are discussed. It is followed by challenges and outlook toward the practical use of electrochemical energy storage devices for wearable applications.

Polymeric ionic liquid-assembled graphene-immobilized silica composite for selective isolation of human serum albumin from human whole blood.

Polymeric ionic liquids (PILs) with 1-vinyl-3-ethylimidazolium cations and two different anions of Br- and PF6- were assembled onto the surface of graphene (G) nanosheets. The derived two composites, i.e., PIL(Br)-G and PIL(PF6)-G, were further efficiently immobilized onto the surface of silica nanoparticles via self-assembly technique. The obtained two PIL-G/SiO2 nanocomposites exhibited diverse adsorption performances toward proteins through adjusting the anions of PILs. Electrostatic attractions between proteins and the nanocomposites dominated protein adsorption, while the presence of PF6- anions weakened electrostatic interactions and deteriorated the selective adsorption of target protein, i.e., bovine serum albumin (BSA) in this case. Specifically, PIL(Br)-G/SiO2 nanocomposite displayed high selectivity toward BSA and a high adsorption efficiency of ca. 98% was achieved for 100 mg L-1 BSA in a Britton-Robinson (B-R) buffer at pH 5. HPLC analysis demonstrated the selectivity of PIL(Br)-G/SiO2 nanocomposite toward BSA in the presence of abundant hemoglobin and cytochrome c. The practical applicability was verified by performing selective isolation of human serum albumin (HSA) from human whole blood. Graphical abstract Selective isolation of human serum albumin from blood by polymeric ionic liquid assembled graphene immobilized silica nanocomposite with tunable anions.

A magnetic adsorbent grafted with pendant naphthyl polymer brush for enrichment of the nonsteroidal anti-inflammatory drugs indomethacin and diclofenac.

Poly(2-naphthyl acrylate) was first grafted onto silica-coated magnetic nanoparticles by surface-initiated atom transfer radical polymerization to prepare a reversed-phase magnetic adsorbent. The resulting polymer brush displays enhanced extraction efficiency by offering active sites on the surfaces of adsorbent. It was applied to the preconcentration of the non-steroidal antiinflammatory drugs (NSAIDs) indomethacin (InDo) and diclofenac (DIC). These drugs interact with the sorbent through hydrophobic and π-interactions, and via electrostatic attraction. By coupling the magnetic solid-phase extraction with HPLC, a method for analysis of InDo and DIC in the environmental water samples was established. The limits of detection range from 0.62 to 0.64 ng·mL-1, and the relative standard deviations for intra-and inter-day analyses of spiked water samples are <11.9%, and relative recoveries are between 62.1 and 96.7%. Graphical abstract A reversed-phase magnetic adsorbent was prepared by grafting poly(2-naphthyl acrylate) brush on the surface of silica coated magnetic nanoparticles. Due to the two conjugated aromatic rings of the monomer, the polymer brush can effectively extract non-steroidal anti-inflammatory drugs through strong π- and hydrophobic interactions.

Controlled hypotension technology can improve patient recovery in the early postoperative period after total knee arthroplasty: A prospective, randomized controlled clinical study.

OBJECTIVES: The study aimed to analyze the application of controlled hypotension and tourniquets in total knee arthroplasty (TKA) to evaluate their early postoperative period effects in TKA. PATIENTS AND METHODS: A total of 183 patients (43 males, 140 females; mean age: 67.8±6.4 years; range, 50 to 84 years) with knee osteoarthritis who needed TKA were recruited for this prospective, randomized controlled clinical study between August 2022 and May 2023. The study included a tourniquet group (group T, 94 patients) and a controlled hypotension group (group H, 89 patients). In group T, an inflatable tourniquet was used throughout the operation, with the pressure of the tourniquet set at 300 mmHg. In group H, controlled hypotension was used, with the mean arterial pressure controlled at 55-65 mmHg. The outcome measures of this study included blood loss, coagulation function, inflammatory mediators, knee joint function, permeation thickness of bone cement around the tibial prosthesis, and cognitive function. RESULTS: The baseline demographics and clinical characteristics of the two groups of patients were comparable (p>0.05). Intraoperative blood loss in group H was higher than that in group T (p<0.05), whereas hemoglobin decrease, postoperative drainage flow, hidden blood loss, and total blood loss in group T were higher than in group H (p<0.05). Fibrinogen, D-dimer, C-reactive protein, and interleukin-6 levels were higher in group T than in group H on the first and third postoperative days (p<0.05). The knee joint function of group H was significantly better than that of group T on the fifth day and one month after the operation (p<0.05). There was no significant difference in the penetration thickness of bone cement around the tibial prosthesis between the two groups (p>0.05). There was no significant difference in Mini-Mental State Examination scores between the two groups on the same day (p>0.05). CONCLUSION: Controlled hypotension technology in TKA can reduce total blood loss by reducing hidden blood loss and can help to alleviate the postoperative hypercoagulable state, relieve inflammatory reactions, and facilitate early recovery of knee joint function after surgery.

All-in-one strategy to develop a near-infrared triggered multifunctional bioactive magnesium phosphate bone cement for bone repair.

Bone cement is widely used in clinical with optimistic filling and mechanical properties. However, the setting time of bone cement is difficult to accurately control, and the existing bone cements exhibit limited therapeutic functionalities. In response to these challenges, we designed and synthesized Nd-doped whitlockite (Nd-WH), endowing bone cement with photothermal-responsive and fluorescence imaging capabilities. The doping amount and photothermal properties of Nd-doped whitlockite were studied, and the composite bone cement was prepared. The results showed that the setting time of bone cement could be regulated by near infrared irradiation, and the multiple functions of promoting osteogenic differentiation, antibacterial and anti-tumor could be realized by adjusting the power and irradiation time of near infrared. By incorporating Nd-doped whitlockite and bone cement, we developed an all-in-one strategy to achieve setting time control, enhanced osteogenic ability, tumor cell clearance, bacterial clearance, and bone tissue regeneration. The optimized physical and mechanical properties of composite bone cement ensure adaptability and plasticity. In vitro and in vivo experiments validated the effectiveness of this bone cement platform for bone repair, tumor cell clearance and bacterial clearance. The universal methods to regulate the setting time and function of bone cement by photothermal effect has potential in orthopedic surgery and is expected to be a breakthrough in the field of bone defect repair. Further research and clinical validation are needed to ensure its safety, efficacy and sustainability. STATEMENT OF SIGNIFICANCE: Bone cement is a valuable clinical material. However, the setting time of bone cement is difficult to control, and the therapeutic function of existing bone cement is limited. Various studies have shown that the bone repair capacity of bone cements can be enhanced by synergistic stimulatory effects in vivo and ex vivo. Unfortunately, most of the existing photothermal conversion materials are non-degradable and poorly biocompatible. This study provides a bone-like photothermal conversion material with photothermal response and fluorescence imaging properties, and constructed a platform for integrated regulation of the setting time of bone cement and diversification of its functions. Therefore, it helps to design multi-functional bone repair materials that are more convenient and effective in clinical operation.

Preparation of immunomagnetic composite nanostructures with bifunctional four-arm PEG derivatives as linkers for the ultrafast enrichment of zearalenone and its metabolites.

It is challenging to prepare sample pretreatment materials with simple use, strong selectivity and satisfactory enrichment performance. In this study, the antibody (3D4) that can specifically recognize zearalenone (ZEN) and its metabolites was immobilized on the surface of gold-coated magnetic Fe3O4 nanoparticles (GMN) by streptavidin (SA)-biotin interaction using GMN as the substrate and our designed four-arm PEG derivative (HS-4ARMPEG10K-(CM)3) as the linker. The immunomagnetic nanoparticles (GMN-4ARMPEG10K-SA-3D4) prepared by this strategy can achieve rapid enrichment (only 5 min) of analytes directly in the matrix, and higher enrichment capacity compared with the previous immunomagnetic particles. The sensitive and accurate analysis of ZEN and its metabolites can be achieved coupled with HPLC-MS/MS. The LODs and LOQs were 0.02-0.05 µg/kg and 0.05-0.10 µg/kg, respectively. The recoveries were 84.13%-112.67%, and the RSDs were 1.09%-9.39%. The method can provide a powerful tool for highly sensitive and rapid monitoring of mycotoxins in complex matrices due to its' strong selectivity and resistance to matrix interference.

Depolymerization of the polyester-polyurethane by amidase GatA250 and enhancing the production of 4,4'-methylenedianiline with cutinase LCC.

Polyurethane (PU) is a complex polymer synthesized from polyols and isocyanates. It contains urethane bonds that resist hydrolysis, which decreases the efficiency of biodegradation. In this study, we first expressed the amidase GatA250, and then, assessed the enzymatic characterization of GatA250 and its efficiency in degrading the polyester-PU. GatA250 degraded self-synthesized thermoplastic PU film and postconsumption foam with degradation efficiency of 8.17% and 4.29%, respectively. During the degradation, the film released 14.8 µm 4,4'-methylenedianiline (MDA), but 1,4-butanediol (BDO) and adipic acid (AA) were not released. Our findings indicated that GatA250 only cleaved urethane bonds in PU, and the degradation efficiency was extremely low. Hence, we introduced the cutinase LCC, which possesses hydrolytic activity on the ester bonds in PU, and then used both enzymes simultaneously to degrade the polyester-PU. The combined system (LCC-GatA250) had higher degradation efficiency for the degradation of PU film (42.2%) and foam (13.94%). The combined system also showed a 1.80 time increase in the production of the monomer MDA, and a 1.23 and 3.62 times increase in the production of AA and BDO, respectively, compared to their production recorded after treatment with only GatA250 or LCC. This study provides valuable insights into PU pollution control and also proposes applicable solutions to manage PU wastes through bio-recycling.

Novel polyurethane-degrading cutinase BaCut1 from Blastobotrys sp. G-9 with potential role in plastic bio-recycling.

Environmental pollution caused by plastic waste has become global problem that needs to be considered urgently. In the pursuit of a circular plastic economy, biodegradation provides an attractive strategy for managing plastic wastes, whereas effective plastic-degrading microbes and enzymes are required. In this study, we report that Blastobotrys sp. G-9 isolated from discarded plastic in landfills is capable of depolymerizing polyurethanes (PU) and poly (butylene adipate-co-terephthalate) (PBAT). Strain G-9 degrades up to 60% of PU foam after 21 days of incubation at 28 â„ƒ by breaking down carbonyl groups via secretory hydrolase as confirmed by structural characterization of plastics and degradation products identification. Within the supernatant of strain G-9, we identify a novel cutinase BaCut1, belonging to the esterase family, that can reproduce the same effect. BaCut1 demonstrates efficient degradation toward commercial polyester plastics PU foam (0.5 mg enzyme/25 mg plastic) and agricultural film PBAT (0.5 mg enzyme/10 mg plastic) with 50% and 18% weight loss at 37 â„ƒ for 48 h, respectively. BaCut1 hydrolyzes PU into adipic acid as a major end-product with 42.9% recovery via ester bond cleavage, and visible biodegradation is also identified from PBAT, which is a beneficial feature for future recycling economy. Molecular docking, along with products distribution, elucidates a special substrate-binding modes of BaCut1 with plastic substrate analogue. BaCut1-mediated polyester plastic degradation offers an alternative approach for managing PU plastic wastes through possible bio-recycling.

Photoactive oligomer with D-D'-A-D'-D''-D'-A-D'-D scaffold for high-efficiency NIR-II phototheranostics.

A D-D'-A-D'-D''-D'-A-D'-D type photoactive oligomer (O-BT) based nanoparticles (NPs) were prepared for biomedical application. The O-BT NPs possessed a high extinction coefficient, excellent hyperthermia generation ability, satisfactory NIR-II fluorescence emission, and good batch-to-batch reproducibility, and could be used as high-efficiency phototheranostics for photothermal therapy and NIR-II fluorescence imaging.

PER2 regulates odontoblastic differentiation of dental papilla cells in vitro via intracellular ATP content and reactive oxygen species levels.

Background: Dental papilla cells (DPCs) are one of the key stem cells for tooth development, eventually forming dentin and pulp. Previous studies have reported that PER2 is expressed in a 24-hour oscillatory pattern in DPCs in vitro. In vivo, PER2 is highly expressed in odontoblasts (which are differentiated from DPCs). However, whether PER2 modulates the odontogenic differentiation of DPCs is uncertain. This research was to identify the function of PER2 in the odontogenic differentiation of DPCs and preliminarily explore its mechanisms. Methods: We monitored the expression of PER2 in DPCs differentiated in vivo. We used PER2 overexpression and knockdown studies to assess the role of PER2 in DPC differentiation and performed intracellular ATP content and reactive oxygen species (ROS) assays to further investigate the mechanism. Results: PER2 expression was considerably elevated throughout the odontoblastic differentiation of DPCs in vivo. Overexpressing Per2 boosted levels of odontogenic differentiation markers, such as dentin sialophosphoprotein (Dspp), dentin matrix protein 1 (Dmp1), and alkaline phosphatase (Alp), and enhanced mineralized nodule formation in DPCs. Conversely, the downregulation of Per2 inhibited the differentiation of DPCs. Additionally, downregulating Per2 further affected intracellular ATP content and ROS levels during DPC differentiation. Conclusion: Overall, we demonstrated that PER2 positively regulates the odontogenic differentiation of DPCs, and the mechanism may be related to mitochondrial function as shown by intracellular ATP content and ROS levels.

[Preparation of a block copolymer-based temperature-responsive affinity chromatography stationary phase for antibody separation and purification].

Antibodies play an essential role in cancer diagnosis and treatment because of the specificity for target biomolecules and reduction of side effects. However, antibodies separation and purification still face some challenges. Antibody elution from columns using a low-pH aqueous solution leads to aggregation or loss of activity of the antibody drugs. In this paper, a block copolymer-based temperature-responsive affinity chromatography (TRAC) stationary phase, SiO2-P[NIPAM-b-4VP]-MEP using the block temperature-responsive copolymer poly(N-isopropylacrylamide-b-4-vinylpyridine) (P[NIPAM-b-4VP]) as the space arms and 4-mercaptoethyl pyridine (MEP) as the ligand was prepared for antibody separation. The TRAC column was tested using bovine serum albumin (BSA) and γ-globulin as model proteins, and the effects of salt concentration in the mobile phase and temperature on their separation were studied in detail. At 40 ℃, the TRAC stationary phase only selectively retained γ-globulin due to the specific affinity interaction between antibodies and the ligand MEP. At 5 ℃, γ-globulin can be eluted from the column with a mass recovery of 92.7% using a Tris-HCl buffer (pH 8.0) solution containing 0.6 mol/L NaCl. The adsorption capacity of γ-globulin on this stationary phase was (71.5 ±2.1) mg/g (n=3), which was twice that of a traditional temperature-sensitive affinity chromatography stationary phase SiO2-PNIPAM-MEP. The stationary phase was also used to separate and purify immunoglobulin (IgG) in human serum in one step by altering the temperature and ion strength of the mobile phase, resulting in a purity of 97.4%±0.7%. Thus, this new technology has specific selectivity for antibodies, as well as mild and green elution conditions, ultimately resolving the problem of traditional affinity chromatography using acid elution, which can lead to the antibodies aggregation/inactivation. This technology has great application potential for the industrial production of antibody drugs.