Polyethylene glycol recombinant human growth hormone in Chinese prepubertal slow-growing short children: doses reported in a multicenter real-world study.

BACKGROUND: To evaluate the effectiveness of individualized-dose polyethylene glycol recombinant human growth hormone (PEG-rhGH) for short stature. METHODS: This real-world study enrolled children with short stature in 19 hospitals throughout China. They were treated with PEG-rhGH for 6 months. The starting dosage ranged from 0.10 to 0.20 mg/kg/week. The primary outcome was the change in height standard deviation score (ΔHt SDS). RESULTS: Five hundred and ten patients were included and grouped based on dosage as A (0.10-0.14 mg/kg/week), B (0.15-0.16 mg/kg/week), C (0.17-0.19 mg/kg/week), and D (0.20 mg/kg/week). The mean 6-month ΔHt SDS for the total cohort was 0.49 ± 0.27, and the means differed among the four dose groups (P = 0.002). The ΔHt SDS was lower in group A than in groups B (LSM difference [95%CI], -0.09 [-0.17, -0.01]), C (LSM difference [95%CI], -0.10 [-0.18, -0.02]), and D (LSM difference [95%CI], -0.13 [-0.21, -0.05]) after adjusting baseline covariates. There were no significant differences among groups B, C, and D. When the baseline IGF-1 was < -2 SDS or > 0 SDS, the △Ht SDS was not different among the four groups (P = 0.931 and P = 0.400). In children with baseline IGF-1 SDS of -2 ~ 0 SDS, a higher dosage was associated with a better treatment effect (P = 0.003), and the △Ht SDS was lower in older children than in younger ones (P < 0.001). CONCLUSIONS: PEG-rhGH could effectively increase height in prepubertal short children. When the baseline IGF-1 was < -2 SDS, 0.10 mg/kg/week could be a starting dose. In other IGF-1 statuses, 0.15-0.20 mg/kg/week might be preferred. TRIAL REGISTRATION: ClinicalTrials.gov: NCT03249480 , retrospectively registered.

Influence of bovine serum albumin on corrosion behaviour of pure Zn in phosphate buffered saline.

Zinc (Zn) and its alloys have received increasing attention as new alternative biodegradable metals. However, consensus has not been reached on the corrosion behaviour of Zn. As cardiovascular artery stent material, Zn is supposed to contact with plasma that contains inorganic salts and organic components. Protein is one of the most important constitute in the plasma and could adsorb on the material surface. In this paper, bovine serum albumin (BSA) was used as a typical protein. Influences of BSA on pure Zn corrosion in phosphate buffered saline is investigated as a function of BSA concentrations and immersion durations by electrochemical techniques and surface analysis. Results showed that pure Zn corrosion was progressively accelerated with BSA concentrations (ranging from 0.05 to 5 g L-1) at 0.5 h. With time evolves, formation of phosphates as corrosion product was delayed by BSA adsorption, especially at concentration of 2 g L-1. Within 48 h, the corrosion of pure Zn was alleviated by BSA at concentration of 0.1 g L-1, whereas the corrosion was enhanced after 168 h. Addition of 2 g L-1 BSA has opposite influence on the pure Zn corrosion. Furthermore, schematic corrosion behaviour at protein/Zn interfaces was proposed. This work encourages us to think more about the influence of protein on the material corrosion and helps us to better understand the corrosion behaviour of pure Zn.

The class II KNOX transcription factors KNAT3 and KNAT7 synergistically regulate monolignol biosynthesis in Arabidopsis.

The function of the transcription factor KNOTTED ARABIDOPSIS THALIANA7 (KNAT7) is still unclear since it appears to be either a negative or a positive regulator for secondary cell wall deposition with its loss-of-function mutant displaying thicker interfascicular and xylary fiber cell walls but thinner vessel cell walls in inflorescence stems. To explore the exact function of KNAT7, class II KNOTTED1-LIKE HOMEOBOX (KNOX II) genes in Arabidopsis including KNAT3, KNAT4, and KNAT5 were studied together. By chimeric repressor technology, we found that both KNAT3 and KNAT7 repressors exhibited a similar dwarf phenotype. Both KNAT3 and KNAT7 genes were expressed in the inflorescence stems and the knat3 knat7 double mutant exhibited a dwarf phenotype similar to the repressor lines. A stem cross-section of knat3 knat7 displayed an enhanced irregular xylem phenotype as compared with the single mutants, and its cell wall thickness in xylem vessels and interfascicular fibers was significantly reduced. Analysis of cell wall chemical composition revealed that syringyl lignin was significantly decreased while guaiacyl lignin was increased in the knat3 knat7 double mutant. Coincidently, the knat3 knat7 transcriptome showed that most lignin pathway genes were activated, whereas the syringyl lignin-related gene Ferulate 5-Hydroxylase (F5H) was down-regulated. Protein interaction analysis revealed that KNAT3 and KNAT7 can form a heterodimer, and KNAT3, but not KNAT7, can interact with the key secondary cell wall formation transcription factors NST1/2, which suggests that the KNAT3-NST1/2 heterodimer complex regulates F5H to promote syringyl lignin synthesis. These results indicate that KNAT3 and KNAT7 synergistically work together to promote secondary cell wall biosynthesis.

Folate Supplementation for Methotrexate Therapy in Patients With Rheumatoid Arthritis: A Systematic Review.

OBJECTIVE: To review the evidence for benefits and harms of folate (folic acid or folinic acid) supplementation on methotrexate (MTX) treatment for rheumatoid arthritis (RA), to assess whether or not folate supplementation would reduce MTX toxicity or reduce MTX benefits, and to decide whether a higher MTX dosage is essential. METHODS: We performed a sensitive search strategy and searched systematically the Medline, Embase, Web of Science and Cochrane Library databases from inception to 2 June 2016. Abstracts from major rheumatology meetings and major trial registers were also searched to retrieve all randomized controlled trials that interested us. RESULTS: Seven studies with 709 patients were included. No significant heterogeneity was found between these trials. For RA patients treated with MTX, those supplied with folate were less likely to have elevated transaminase (odds ratio [OR] 0.15; 95% confidence interval [95% CI] 0.10, 0.23 [p < 0.00001]) and gastrointestinal side-effects such as nausea and vomiting (OR 0.71; 95% CI 0.51, 0.99 [p = 0.04]). Folate appeared to promote compliance to MTX as it reduced patient withdrawal compared to placebo (OR 0.29; 95% CI 0.21, 0.42 [p < 0.00001]). There was no statistical difference for mouth sores between folate and placebo (OR 0.83; 95% CI 0.57, 1.22 [p = 0.35]). As the markers of disease activity in those trials were not consistent, it was impossible to decide whether folate supplementation reduced MTX efficacy. Besides, we compared high-dose folate (≥25 mg per week) and low-dose folate (≤10 mg per week) on MTX efficacy, finding no statistical difference (OR 2.07; 95% CI 0.81, 5.30 [p = 0.13]), nor on MTX toxicity (OR 1.56; 95% CI 0.80,3.04 [p = 0.19]). CONCLUSION: Folate supplementation can reduce the incidence of hepatotoxicity and gastrointestinal side-effects of MTX in patients with RA. It can also reduce patient withdrawal from MTX treatment. Although it tended to reduce mouth sores, it had no statistical significance. No significant difference was found between high-dose folate and low-dose folate on MTX efficacy or toxicity.

In-situ self-assembly of plant polyphenol-coated Fe3O4 particles for oleaginous microalgae harvesting.

Plant polyphenol (PP), a natural polymer from the Larix gmelinii, was selected as the surfactant to synthesize Fe3O4. The Fe3O4-PP composite was prepared by in-situ self-assembly in solvothermal synthesis, and characterized using FE-SEM, TEM, XRD, FTIR, XPS, TGA, and VSM. The harvesting efficiency of Chlorella vulgaris was investigated under different parameters, including algal organic matter, dosage, and pH. The results showed that the core-shell sphere of Fe3O4-PP (∼150 nm) was coated by ∼50 nm PP with a saturated magnetization of 40.0 emu/g. The Fe3O4-PP could be directly applied to the culture broth (1.5 g dry cell weight/L, pH = 9.03), achieving 93.0% of harvesting efficiency at 20 g/L. Cells were detached from the harvested aggregates by adjusting pH value to 9.80 and with ultrasonication, which achieved 95.6% of recovery efficiency. The recycled Fe3O4-PP showed high stabilities in surface properties, maintaining more than 87.5% of harvesting efficiency after five recycles.

Transcriptome profiling and identification of transcription factors in ramie (Boehmeria nivea L. Gaud) in response to PEG treatment, using illumina paired-end sequencing technology.

Ramie (Boehmeria nivea L. Gaud), commonly known as China grass, is a perennial bast fiber plant of the Urticaceae. In China, ramie farming, industry, and trade provide income for about five million people. Drought stress severely affects ramie stem growth and causes a dramatic decrease in ramie fiber production. There is a need to enhance ramie's tolerance to drought stress. However, the drought stress regulatory mechanism in ramie remains unknown. Water stress imposed by polyethylene glycol (PEG) is a common and convenient method to evaluate plant drought tolerance. In this study, transcriptome analysis of cDNA collections from ramie subjected to PEG treatment was conducted using Illumina paired-end sequencing, which generated 170 million raw sequence reads. Between leaves and roots subjected to 24 (L2 and R2) and 72 (L3 and R3) h of PEG treatment, 16,798 genes were differentially expressed (9281 in leaves and 8627 in roots). Among these, 25 transcription factors (TFs) from the AP2 (3), MYB (6), NAC (9), zinc finger (5), and bZIP (2) families were considered to be associated with drought stress. The identified TFs could be used to further investigate drought adaptation in ramie.

A mediator-free glucose biosensor based on glucose oxidase/chitosan/α-zirconium phosphate ternary biocomposite.

A novel glucose oxidase/chitosan/α-zirconium phosphate (GOD/chitosan/α-ZrP) ternary biocomposite was prepared by co-intercalating glucose oxidase (GOD) and chitosan into the interlayers of α-zirconium phosphate (α-ZrP) via a delamination-reassembly procedure. The results of X-ray diffraction, infrared spectroscopy, circular dichroism, and ultraviolet spectrum characterizations indicated not only the layered and hybrid structure of the GOD/chitosan/α-ZrP ternary biocomposite but also the recovered activity of the intercalated GOD improved by the co-intercalated chitosan. By depositing the GOD/chitosan/α-ZrP biocomposite film onto a glassy carbon electrode, the direct electrochemistry of the intercalated GOD was achieved with a fast electron transfer rate constant, k(s), of 7.48±3.52 s(-1). Moreover, this GOD/chitosan/α-ZrP biocomposite modified electrode exhibited a sensitive response to glucose in the linear range of 0.25-8.0 mM (R=0.9994, n=14), with a determination limit of 0.076 mM.

Research Progress in Structure Synthesis, Properties, and Applications of Small-Molecule Silicone Surfactants.

Silicone surfactants have garnered significant research attention owing to their superior properties, such as wettability, ductility, and permeability. Small-molecular silicone surfactants with simple molecular structures outperform polymeric silicone surfactants in terms of surface activity, emulsification, wetting, foaming, and other areas. Moreover, silicone surfactants with small molecules exhibit a diverse and rich molecular structure. This review discusses various synthetic routes for the synthesis of different classes of surfactants, including single-chain, "umbrella" structure, double chain, bolaform, Gemini, and stimulus-responsive surfactants. The fundamental surface/interface properties of the synthesized surfactants are also highlighted. Additionally, these surfactants have demonstrated enormous potential in agricultural synergism, drug delivery, mineral flotation, enhanced oil recovery, separation, and extraction, and foam fire-fighting.

NF-κB-Signaling-Targeted Immunomodulatory Nanoparticle with Photothermal and Quorum-Sensing Inhibition Effects for Efficient Healing of Biofilm-Infected Wounds.

The development of therapeutics with high antimicrobial activity and immunomodulatory effects is urgently needed for the treatment of infected wounds due to the increasing danger posed by recalcitrant-infected wounds. In this study, we developed light-controlled antibacterial, photothermal, and immunomodulatory biomimetic N/hPDA@M nanoparticles (NPs). This nanoplatform was developed by loading flavonoid naringenin onto hollow mesoporous polydopamine NPs in a π-π-stacked configuration and encasing them with macrophage membranes. First, our N/hPDA@M NPs efficiently neutralized inflammatory factors present within the wound microenvironment by the integration of macrophage membranes. Afterward, the N/hPDA@M NPs effectively dismantled bacterial biofilms through a combination of the photothermal properties of PDA and the quorum sensing inhibitory effects of naringenin. It is worth noting that N/hPDA@M NPs near-infrared-enhanced release of naringenin exhibited specificity toward the NF-κB-signaling pathway, effectively mitigating the inflammatory response. This innovative design not only conferred remarkable antibacterial properties upon the N/hPDA@M NPs but also endowed them with the capacity to modulate inflammatory responses, curbing excessive inflammation and steering macrophage polarization toward the M2 phenotype. As a result, this multifaceted approach significantly contributes to expediting the healing process of infected skin wounds.

Tuning the Properties of Ester-Based Degradable Polymers by Inserting Epoxides into Poly(ϵ-caprolactone).

A series of ester-ether copolymers were obtained via the reaction between α,ω-dihydroxyl poly(ϵ-caprolactone) (PCL) and ethylene oxide (EO) or monosubstituted epoxides catalyzed by strong phosphazene bases. The two types of monomeric units were distributed in highly random manners due to the concurrence of epoxide ring-opening and fast transesterification reactions. The substituent of epoxide showed an interesting bidirectional effect on the enzymatic degradability of the copolymer. Compared with PCL, copolymers derived from EO exhibited enhanced hydrophilicity and decreased crystallinity which then resulted in higher degradability. For the copolymers derived from propylene oxide and 1,2-butylene oxide, the hydrophobic alkyl pendant groups also allowed lower crystallinity of the copolymers thus higher degradation rates. However, further enlarging the pendant groups by using styrene oxide or 2-ethylhexyl glycidyl ether caused a decrease in the degradation rate, which might be ascribed to the higher bulkiness hindering the contact of ester groups with lipase.

Novel PVAMA/GelMA aerogels prepared by liquid-phase collection of photoinitiated polymerisation: injectable and flowable low-density 3D scaffolds for bone regeneration.

Nanofibrous scaffolds, which are morphologically/structurally similar to native extracellular matrix, are ideal biomaterials for tissue engineering and regenerative medicine. However, the use of traditional electrospinning techniques to produce three-dimensional (3D) nanofibrous scaffolds with desired structural properties presents difficulty. To address this challenge, we prepared a novel liquid-phase-collected photoinitiated polymerised aerogel 3D scaffold (LPPI-AG) using the thermally induced (nanofiber) self-aggregation method after liquid-phase electrospinning of the hydroxyapatite-doped methacrylated polyvinyl alcohol/methacrylated gelatine solution obtained by photoinitiated polymerisation. The fabricated aerogel scaffolds had a high porosity of approximately 99.01% ± 0.40% and an interconnected network structure with pore sizes ranging from submicron to ∼300 µm. The new aerogel rapidly became flowable when exposed to a solution, and it can fill gaps and repair gap edges effectively and be loaded with nutrients and growth factors that promote bone growth for bone tissue engineering. LPPI-AG scaffolds can considerably promote osteogenic differentiation of bone marrow mesenchymal stem cells in vitro. Furthermore, in vivo studies showed that the LPPI-AG scaffold significantly promoted bone formation in a mouse model of critical-size calvarial defects.

Long-term Pegylated GH for Children With GH Deficiency: A Large, Prospective, Real-world Study.

CONTEXT: The evidence of long-term polyethylene glycol recombinant human GH (PEG-rhGH) in pediatric GH deficiency (GHD) is limited. OBJECTIVE: This study aimed to examine the effectiveness and safety of long-term PEG-rhGH in children with GHD in the real world, as well as to examine the effects of dose on patient outcomes. DESIGN: A prospective, observational, posttrial study (NCT03290235). SETTING, PARTICIPANTS AND INTERVENTION: Children with GHD were enrolled from 81 centers in China in 4 individual clinical trials and received weekly 0.2 mg/kg/wk (high-dose) or 0.1 to <0.2 mg/kg/wk (low-dose) PEG-rhGH for 30 months. MAIN OUTCOMES MEASURES: Height SD score (Ht SDS) at 12, 24, and 36 months. RESULTS: A total of 1170 children were enrolled in this posttrial study, with 642 patients in the high-dose subgroup and 528 in the low-dose subgroup. The Ht SDS improved significantly after treatment in the total population (P < 0.0001), with a mean change of 0.53 ± 0.30, 0.89 ± 0.48, 1.35 ± 0.63, 1.63 ± 0.75 at 6 months, 12 months, 24 months, and 36 months, respectively. In addition, the changes in Ht SDS from baseline were significantly improved in the high-dose subgroup compared with the low-dose subgroup at 6, 12, 24, and 36 months after treatment (all P < 0.05). A total of 12 (1.03%) patients developed serious adverse events. There was no serious adverse event related to the treatment, and no AEs leading to treatment discontinuation or death occurred. CONCLUSIONS: PEG-rhGH showed long-term effectiveness and safety in treating children with GHD. Both dose subgroups showed promising outcomes, whereas PEG-rhGH 0.2 mg/kg/wk might show additional benefit.

PEG-rhG-CSF for prophylaxis of neutropenia after chemotherapy in patients with non-small cell lung cancer: A multicenter, prospective, randomized study.

BACKGROUND: To evaluate the efficacy and safety of pegylated recombinant human granulocyte colony-stimulating factor (PEG-rhG-CSF) in preventing neutropenia during multiple cycles of chemotherapy in patients with non-small cell lung cancer (NSCLC). METHOD: In a multicenter, prospective, randomized trial, patients with NSCLC were randomly assigned in a 2:1 ratio to treatment group (PEG-rhG-CSF as primary prophylactic therapy) or control group. Patients in the control group were administered rhG-CSF when white blood cell count was <2.0 × 109 /L or absolute neutrophil count <1.0 × 109 /L. The primary endpoint was the incidence of grade 3/4 neutropenia. Secondary endpoints included the incidence and duration of grade 3/4 neutropenia in each cycle, the incidence of febrile neutropenia (FN), delay rate of chemotherapy, prolonged time of chemotherapy, and safety. RESULTS: Between January 2019 and July 2021, 130 patients were enrolled (treatment group: n = 87, control group: n = 43). The incidence of grade 3/4 neutropenia in the treatment group was significantly lower than that in the control group (1.15% vs. 11.63%, p < 0.05). The mean duration of grade 3/4 neutropenia for the treatment and control group was 2.00 and 3.75 days, respectively. There were no statistical differences in the incidence of FN, delay rate of chemotherapy, prolonged time of chemotherapy, and antibiotic use between the two groups (all p > 0.05). Adverse events were reported in 47.13% of patients in the treatment group and 48.84% patients in the control group. CONCLUSIONS: Primary prophylactic treatment with PEG-rhG-CSF could reduce the incidence of neutropenia in patients with NSCLC during multiple cycles of chemotherapy, with acceptable safety and tolerability.

Evaluation of the effect of T-Scan™ as an adjunct to stabilization splint in the treatment of temporomandibular joint disorders.

OBJECTIVE: To assess the effectiveness of the stabilization splint (SS) combined with the T-Scan™ III system in the treatment of temporomandibular joint disorder (TMD) with myofascial pain. METHODS: Forty-eight enrolled patients were randomly assigned to the SS group or T-Scan™-guided SS group. Mandibular Function Impairment Questionnaire (MFIQ), Maximum Comfortable Opening (MCO), Visual Analog Scale (VAS), and Patient Health Questionnaire-9 (PHQ-9) were used as the outcome variables. RESULTS: The occlusal contacts of patients in the SS plus T-Scan™ group showed lower Occlusal Time (OT), Disocclusion Time (DT), and Asymmetry Index of Occlusal Force (AOF) after occlusal adjustment under the guidance of the T-Scan™. Importantly, the TMD symptoms were alleviated more obviously in SS plus T-Scan™ group, with better scores for MCO and MFIQ. CONCLUSION: T-Scan™-guided occlusal adjustment of SS can obtain better OT, DT, and AOF, which furthers improvement of the therapeutic effects on TMD with myofascial pain.

Problem-based learning and case-based learning in dental education.

BACKGROUND: Numerous novel teaching methods have been developed in recent times for use in medical education. Of these methods, problem-based learning (PBL) and case-based learning (CBL) have attracted the most attention. We evaluated and compared the efficiency of these two teaching methods in dental education and discussed the importance of teachers to these courses. This study aims to evaluate the efficiency of PBL and CBL in dental education, and discuss the importance of teachers to the courses. METHODS: In this study, 28 students enrolled in a seven-year program at the College of Stomatology at Shanghai Jiao Tong University were chosen as participants. In the fourth year, PBL combined with independent learning was used to teach students the theory of oral mucosal diseases. During the internship, CBL was used to present specific cases. Both methods were carried out with group discussion. After the PBL course, teachers assessed its effect by the students' class performance, their ability to collect data, and group cooperation. After the CBL course, its effect was assessed by the students' ability in history-taking, diagnosis and antidiastole, and case analysis. In addition, the teachers' roles in both methods were assessed by both the students and the teachers themselves. Data was collected by questionnaire survey and statistically analyzed with SPSS Statistics 20. RESULTS: PBL significantly improved students' self-learning abilities in the theory course. CBL helped students make diagnoses and develop treatment plans for actual cases in the internship. Both students and teachers thought that teachers were indispensable to both PBL and CBL. There was no difference between student and teacher views. CONCLUSIONS: Although PBL and CBL have different focuses, their combination may enhance teaching effectiveness in dental education. Additionally, teachers play an important role in the application of both these teaching methods.

Effects of Helicobacter pylori Infection on the Oral Microbiota of Reflux Esophagitis Patients.

The human oral microbiota plays a vital role in maintaining metabolic homeostasis. To explore the relationship between Helicobacter pylori (Hp) and reflux esophagitis, we collected 86 saliva samples from reflux esophagitis patients (RE group) and 106 saliva samples from healthy people (C group) for a high-throughput sequencing comparison. No difference in alpha diversity was detected between the RE and the C groups, but beta diversity of the RE group was higher than the C group. Bacteroidetes was more abundant in the RE group, whereas Firmicutes was more abundant in the C group. The linear discriminant analysis effect size analysis demonstrated that the biomarkers of the RE group were Prevotella, Veillonella, Leptotrichia, and Actinomyces, and the biomarkers of the C group were Lautropia, Gemella, Rothia, and Streptococcus. The oral microbial network structure of the C group was more complex than that of the RE group. Second, to explore the effect of Hp on the oral microbiota of RE patients, we performed the 14C-urea breath test on 45 of the 86 RE patients. We compared the oral microbiota of 33 Hp-infected reflux esophagitis patients (REHpp group) and 12 non-Hp-infected reflux esophagitis patients (REHpn group). No difference in alpha diversity was observed between the REHpn and REHpp groups, and beta diversity of the REHpp group was significantly lower than that of the REHpn group. The biomarkers in the REHpp group were Veillonella, Haemophilus, Selenomonas, Megasphaera, Oribacterium, Butyrivibrio, and Campylobacter; and the biomarker in the REHpn group was Stomatobaculum. Megasphaera was positively correlated with Veillonella in the microbial network of the REHpp group. The main finding of this study is that RE disturbs the human oral microbiota, such as increased beta diversity. Hp infection may inhibit this disorderly trend.

[Influence of different surface treatments on resin nano ceramic-resin cement bond strength].

OBJECTIVE: This work aimed to evaluate the effect of different surface treatments on the shear bond strength of resin nano ceramic to resin cement, thereby providing a theoretical basis for the improvement of clinical application. METHODS: A total of 150 specimens (10 mm×10 mm×3 mm) were milled from resin nano ceramic blocks (Lava Ultimate) using computer-aided design/computer aided manufacturing(CAD/CAM) technology. The specimens were randomly divided into five groups according to the surface treatment performed, as follows: control, sandblasted, sandblasted+silane, hydrofluoric acid, and hydrofluoric acid+silane groups. After the corresponding surface treatment, the specimens were cemented using Single Bond Universal Adhesive and RelyXTM Ultimate ClickerTM adhesive resin cement. All cemented specimens were placed in distilled water for 24 h and 30 days and subjected to a shear bond strength test in a universal testing machine. RESULTS: The surface treatment and water storage periods showed significant effects on bond strength. Surface treatment with sandblasted+silane showed the highest shear strength values among all tested groups, and the difference was statistically significant (P<0.05). A difference was observed between the control and hydrofluoric acid groups, and both had significantly difference compared with other groups (P<0.05). Sandblasted and hydrofluoric acid+silane groups were not statistically different, and both had significantly difference compared with other groups (P<0.05). CONCLUSIONS: The surface of resin nanoceramic treated by sand-blasted, sandblasted+silane, and hydrofluoric acid+silane can improve the bond strength. The sandblasted+silane group had the best the shear bond strength among the groups.

Wafer-Scale Uniform Carbon Nanotube Transistors for Ultrasensitive and Label-Free Detection of Disease Biomarkers.

Carbon nanotube (CNT) field-effect transistor (FET)-based biosensors have shown great potential for ultrasensitive biomarker detection, but challenges remain, which include unsatisfactory sensitivity, difficulty in stable functionalization, incompatibility with scalable fabrication, and nonuniform performance. Here, we describe ultrasensitive, label-free, and stable FET biosensors built on polymer-sorted high-purity semiconducting CNT films with wafer-scale fabrication and high uniformity. With a floating gate (FG) structure using an ultrathin Y2O3 high-κ dielectric layer, the CNT FET biosensors show amplified response and improved sensitivity compared with those sensors without Y2O3, which is attributed to the chemical gate-coupling effect dominating the sensor response. The CNT FG-FETs are modified to selectively detect specific disease biomarkers, namely, DNA sequences and microvesicles, with theoretical record detection limits as low as 60 aM and 6 particles/mL, respectively. Furthermore, the biosensors exhibit highly uniform performance over the 4 in. wafer as well as superior bias stress stability. The FG CNT FET biosensors could be extended as a universal biosensor platform for the ultrasensitive detection of multiple biological molecules and applied in highly integrated and multiplexed all CNT-FET-based sensor architectures.

Injectable thermosensitive chitosan/gelatin-based hydrogel carried erythropoietin to effectively enhance maxillary sinus floor augmentation in vivo.

OBJECTIVE: Maxillary sinus floor augmentation (MSFA) is commonly used to increase the alveolar bone height in the posterior maxilla before implant placement. In the present study, we evaluated if the injectable thermosensitive chitosan/ß-sodium glycerophosphate disodium salt hydrate/gelatin (CS/GP/GA) hydrogel carried erythropoietin (EPO) could enhance the new bone formation for MSFA in vivo. METHODS: EPO-CS/GP/GA hydrogel was prepared by ionic crosslinking. Then, characteristics of EPO-CS/GP/GA were evaluated by morphology, injectable property and pH on the gelling time (GT). The release profile of EPO was evaluated by enzyme linked immunosorbent assay (ELISA), and effects of EPO on proliferation and osteoblastic differentiation of bone marrow stromal cells (BMSC) were analyzed by 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) and reverse transcription quantitative real-time PCR (RT-qPCR), respectively. Finally, EPO-CS/GP/GA was injected into the maxillary sinus floor of the rabbit to test the potential application for MSFA. RESULTS: Results showed that GT was decreased with the increase of pH value. The GT was 110±15s at pH 7.0. SEM images showed that the CS/GP/GA hydrogel had a sponge network structure. Results from ELISA assay revealed that the cumulative release of EPO from the EPO-CS/GP/GA hydrogel reached 67% at 4h, and 94% at 15 days. MTT assay showed that EPO within EPO-CS/GP/GA hydrogel could significantly promote proliferation of BMSCs compared to control group (p<0.001) . Results of RT-qPCR assays demonstrated that the expression of Sp7, Runx2, Col I and Alp were significantly increased from EPO-CS/GP/GA group compared to control group on day 14 (p<0.001). Importantly, EPO-CS/GP/GA hydrogel could significantly induce bone formation (81.98mm3) compared with control group (43.11mm3) after 12 weeks post-implantation in vivo. The calculation of thickness of mesenchymal condensation indicated that thickness of mesenchymal condensation was significantly increased from EPO-CS/GP/GA group (∼121.4µm) compared to control group (∼37µm) resulting in enhancing intramembranous ossification. SIGNIFICANCE: The EPO-CS/GP/GA hydrogel provides a novel strategy for MSFA with a minimally invasive way.