RESUMO
OBJECTIVE: To investigate the preparation of novel nanoliposomes (Borneol Angelica Polysaccharide Liposomes, BAPL) for anti-cerebral ischaemia and verify its curative effects and mechanism. METHODS: By applying a uniform experiment design to investigate the fitting combination of BAPL. Encapsulation Efficiency Evaluation of BAPL Preparation; Particle Size and Surface Potential Evaluation of BAPL Biological activity; Cerebral ischaemia models of rats Evaluation of BAPL curative effects and mechanism. RESULTS: (1) The fitting combination of lecithin, Cholesterol, AP mass and the borneol mass was 60 mg, 60 mg, 45 mg and 5 mg. the highest encapsulation efficiency was 80.4%, the particle size was 179.1 nm, and the surface zeta potential was -17.2 mV. It conforms to the nano-material standards. (2) The results of animal experiments show that: In the BAPL group, the infarct volume of TTC staining was significantly decreased, and the expression levels of NF-κBp65, TLR-4, IL-8, IL-6, IL-1ß in brain tissue were significantly decreased, while the expression levels of ZO-1, ZO-2, IL-10 were significantly increased after cerebral ischaemia-reperfusion. CONCLUSION: BAPL is a novel nano and effective material for anti-cerebral ischaemia.
Assuntos
Isquemia Encefálica , Lipossomos , Ratos , Animais , Isquemia Encefálica/tratamento farmacológico , Isquemia , Polissacarídeos/farmacologiaRESUMO
The quality of bowel preparation is an extremely important determinant of colonoscopy results. However, the efficacy of senna regimens in improving bowel cleanliness is uncertain. We conducted a systematic review and meta-analysis to synthesize data on whether using a senna bowel preparation regimen enhances the bowel cleanliness. We searched Web of Science Core Collection, MEDLINE, PubMed, Embase, Cochrane Library, and Scopus databases (from the inception to August 2021). The primary efficacy outcome was bowel cleanliness. Secondary outcomes included patient compliance, tolerance, and adverse events. Eleven trials fulfilled the inclusion criteria (3,343 patients. Overall, we found no significant differences in bowel cleanliness between the senna regimen and other bowel preparation regimens (odds ratio [95% confidence interval]: 1.02 [0.63, 1.67], p = 0.93). There was significant difference in tolerance (odds ratio [95% confidence interval]: 1.66 [1.08, 2.54], p = .02) and compliance (odds ratio [95% confidence interval]: 3.05 [1.42, 6.55], p = .004). The senna regimen yielded a significantly greater proportion of no nausea (odds ratio [95% confidence interval]: 1.84 [1.45, 2.32]) and vomiting (odds ratio [95% confidence interval]: 1.65 [0.81, 3.35]). Compared with other bowel preparation regimens, the senna regimen may be effective and safe in bowel cleaning before colonoscopy, with superior compliance and tolerance.
Assuntos
Catárticos , Colonoscopia , Humanos , Colonoscopia/métodos , Senosídeos , Cooperação do Paciente , PolietilenoglicóisRESUMO
Etomidate as a non-barbiturate sedative, has central inhibitory effect and addiction and has been listed as a controlled drug in some countries due to the abusing trend nowadays. Therefore, rapid and sensitive detection of etomidate is of great significance. In this work, a novel fluorescent sensing probe (CuNCs@MIPs) based on copper nanoclusters (CuNCs) and molecular imprinted polymers (MIPs) has been firstly reported. CuNCs was environment-friendly synthesized using poly(vinylpyrrolidone) as a template and ascorbic acid as a reducing agent. After functionalized with molecular imprinting technique, the CuNCs@MIPs probe has special binding cavities on surface to target etomidate, causing the fluorescence intensity rapidly decrease, which confirmed it has excellent sensitivity, selectivity and stability. Under optimal conditions, the fluorescent sensing probe presented high precision linear relationship for etomidate in range of 10-500â¯ng/ml with detection limit of 10â¯ng/ml, and the whole detection process was completed within 10â¯min. This sensing method has also been applied to real samples detection, still demonstrated excellent feasibility in electronic cigarette liquids and urine. More importantly, compared with previous methods, this fluorescent sensing method has advantages such as rapid, simple and easy to operate. Collectively, the proposed CuNCs@MIPs sensing probe has good fluorescence characteristics and simple synthesis strategy, showed a great potential in etomidate detection and application.
Assuntos
Cobre , Etomidato , Corantes Fluorescentes , Hipnóticos e Sedativos , Limite de Detecção , Polímeros Molecularmente Impressos , Cobre/química , Etomidato/análogos & derivados , Humanos , Corantes Fluorescentes/química , Polímeros Molecularmente Impressos/química , Hipnóticos e Sedativos/análise , Hipnóticos e Sedativos/urina , Nanopartículas Metálicas/química , Impressão Molecular , Espectrometria de FluorescênciaRESUMO
As a promising treatment technology for wastewater, the promotion of membrane bioreactors (MBR) is restricted by biological fouling. Among the measures used to mitigate membrane fouling, the addition of powdered activated carbon (PAC) to MBRs has been recognized as an effective practice. However, the effects of PAC dosage on the performance of MBRs that treat highly biochemical influent from wastewater treatment plants remain unclear. In this study, by investigating the treatment of biochemical tailwater by PAC-MBRs, we thoroughly analyzed the effects of PAC dosage on the contamination removal efficiency, membrane operation cycles, sludge mixture properties, and microorganism distributions. The results indicated that the addition of PAC enhanced the removal efficiency of MBRs depending on the contaminant of interest. For example, the removal efficiency of total nitrogen can be boosted from 30 % to 60 % with PAC addition, while the removal efficiencies of total phosphorus were comparable with or without PAC addition. Furthermore, the application of PAC in MBRs can prolong the duration of membranes by suppressing biological fouling. This was supported by the decreased microbial products, reduced smaller solid particles, and stronger stability of sludge particles. PAC addition also boosts the proportion of Proteus and decreases the proportion of Bacteroides, which helps to improve the removal efficiencies of contaminants. Finally, among the PAC dosages tested in our study, 1.5 g/L PAC was proposed as the optimal candidate for treating highly biochemical influents. For example, the corresponding time for transmembrane pressure to reach 0.03 MPa was 19 d at 1.5 g/L PAC, while these periods were 7 and 14 d at dosages of 0 and 0.5 g/L, respectively. Overall, the findings of this study will aid in the selection of optimal dosages for other systems with different types of influents.
Assuntos
Carvão Vegetal , Esgotos , Carvão Vegetal/química , Pós , Membranas Artificiais , Reatores BiológicosRESUMO
Methods: A total of 120 patients were randomized to receive either the control group (n = 64) or the experimental group (n = 65). Patients in the control group adopted the low-volume split-dose regimen one, and patients in the experimental group adopted the low-volume split-dose regimen two. Those randomized to regimen one were instructed to take 0.75 L PEG two hours after dinner the day before the colonoscopy and 1.5 L PEG 4 hours before the colonoscopy. Patients assigned to regimen two were invited to consume 1.5 L PEG two hours after dinner the day before the colonoscopy and 0.75 L PEG 4 hours before the colonoscopy. The quality of bowel preparation, rated according to a Boston Bowel Preparation Scale (BBPS), represented the primary outcome measure. Tolerability, satisfaction, and lesions detection rated were secondary outcomes. Results: There was no significant difference between the transverse colon and right colon scores between the two groups (P > 0.05). The low-volume split-dose regimen two showed a higher success rate for cleansing of the right colon and overall colon (P < 0.05). For the comparison of the patients' bowel tolerance, there were no statistical differences between the two groups regarding thirst, abdominal pain or abdominal discomfort, abdominal distension, dizziness or headache, anal discomfort, and sleep disturbance (P > 0.05). However, regimen two had significantly less nausea, vomiting, and fatigue than regimen one (24.62% vs. 42.19%, P=0.034; 10.77% vs. 25.00%, P=0.035; 6.15% vs. 21.88%, P=0.010, respectively). Patient-reported satisfaction and willingness to repeat the bowel preparation were significantly higher for low-volume split-dose regimen two than for low-volume split-dose regimen one (P=0.011; P=0.015). Conclusions: In early morning colonoscopies, the bowel-cleansing efficacy and patient tolerability of low-volume split-dose regimen two were superior to low-volume split-dose regimen one.
Assuntos
Catárticos , Polietilenoglicóis , Catárticos/efeitos adversos , Colonoscopia , Eletrólitos , Humanos , Estudos ProspectivosRESUMO
Nonsolvent-induced phase separation (NIPS) method was employed to prepare polylactic acid (PLA) films using N-methyl-2-pyrrolidone (NMP) as a nonsolvent. The morphology and structure of PLA films were characterized, and the application of the films in pork preservation was investigated. When 10 wt% NMP was added, film with uniform porous structures was obtained. The crystalline and Fourier-transform infrared spectra analyses indicated that the addition of NMP during the preparation of PLA films caused their crystalline properties to change, but had no effect on their composition. However, the 10 wt% NMP/PLA film had improved thermal stability, water vapor transmission and oxygen permeability. The results on the changes in pH, total volatile basic nitrogen content and total viable counts of pork during refrigerated storage indicated that the 10 wt% NMP/PLA film could more effectively extend the shelf life of pork than polyethylene film. This work demonstrates the potential of the porous PLA film in pork packaging.
Assuntos
Embalagem de Alimentos , Poliésteres , Porosidade , Resistência à TraçãoRESUMO
The influence of NaCl concentration on microbiologically influenced corrosion (MIC) of Q235 carbon steel by the halophilic archaeon Natronorubrum tibetense was investigated by immersion tests and electrochemical measurements. An increase in NaCl concentration from 0 g/mL to 0.1 g/mL promoted the anodic dissolution of carbon steel and accelerated its corrosion, but MIC did not occur. A further increase in NaCl concentration to 0.2 g/mL led to MIC in inoculated medium, and the occurrence of the MIC resulted in further aggravation of carbon steel corrosion. Once the NaCl concentration reached 0.3 g/mL, the high concentration of chloride ions greatly interfered with the adsorption of dissolved oxygen and the attachment of N. tibetense cells to the surface of carbon steel, thus reducing the corrosion rate of carbon steel and inhibiting the MIC.
Assuntos
Halobacteriaceae/citologia , Cloreto de Sódio/análise , Aço/química , Adsorção , Carbono/química , Adesão Celular , Corrosão , EletrodosRESUMO
Infection from bacterial resistance to antibiotics has given rise to a grave threat to human health in the world. It is vital to developing highly efficient antibacterial materials that are safe and biocompatible with humans and without bacterial resistance. In this study, nanofiber membranes of graphene oxide/polyacrylonitrile (GO/PAN) with highly efficient antibacterial activity were fabricated via electrospinning technique. As the spindle-knot structure of membranes formed by the addition of GO sheets increased, the hydrophilicity and surface roughness increased. The antibacterial test indicated that antibacterial ratios of 3GO/PAN membranes against Escherichia coli and Staphylococcus aureus were 98.5% and 99.6%, respectively after contracting 24 h, with highly efficient antibacterial activity. Furthermore, the E. coli cell structures of adhered to the GO/PAN nanofiber surface changed significantly shrunk and deformed, and the number of S. aureus cell were obviously less contrast than the pure PAN. The main antibacterial mechanism was GO of spindle-knot in nanofiber membranes produced ROS destroyed the physiological activities of the bacteria lead to death. The fabricated GO/PAN nanofiber membrane of this study is promising to develop to a kind of novel antibacterial materials.
Assuntos
Resinas Acrílicas/química , Antibacterianos/química , Materiais Biocompatíveis/química , Grafite/química , Nanofibras/química , Resinas Acrílicas/farmacologia , Antibacterianos/farmacologia , Materiais Biocompatíveis/farmacologia , Escherichia coli/efeitos dos fármacos , Infecções por Escherichia coli/prevenção & controle , Grafite/farmacologia , Humanos , Membranas Artificiais , Infecções Estafilocócicas/prevenção & controle , Staphylococcus aureus/efeitos dos fármacosRESUMO
Super-tough poly (l-lactide) (PLLA) without compromising its biodegradability and biocompatibility was fabricated by reactive blending with PLLA and maleic anhydride grafted starch (MS)/poly (ethylene glycol) diacrylate (PEGDA). PEGDA as reactive compatibilizer exhibits higher compatibilization efficiency and significant plasticization effect in PLLA matrix. Fourier transform infrared spectroscopy (FT-IR) confirmed that PEGDA monomer successfully located at the molecules of MS and some interesterification reactions occurred between PEGDA and PLLA. The ductility of PLLA materials were significantly improved, for example, the elongation of break increased to 298% at the optimum PLLA/MS/PEGDA content. Dynamic mechanical thermal analysis (DMTA) demonstrated the glass transition temperature of blends decreased with the contents of MS/PEGDA increasing. The differential scanning calorimeter (DSC) results revealed that cold crystallization temperature and melting temperature of blends were decreased with the augment of the contents of MS/PEGDA. Wide angle X-ray diffraction (WARD) and DSC certified that a high crystalline article was obtained through practical extrusion process, which could propagate shear yielding deformation to dissipate energy during tensile fracture. Scanning electron microscope (SEM) demonstrated that the blends with PEGDA did not exhibit a visible phase-separated morphology from cryogenic fractured surfaces compared with the blend without PEGDA.
Assuntos
Anidridos Maleicos/química , Fenômenos Mecânicos , Poliésteres/química , Polietilenoglicóis/química , Amido/química , Ligação de Hidrogênio , Hidróxidos/química , Teste de Materiais , TemperaturaRESUMO
Although photothermal therapy (PTT) and photodynamic therapy (PDT) are widely commended for tumor treatment recently, they still suffer severe challenges due to the non-specificity of photothermal agents (PTAs)/photosensitizers (PSs) and hypoxic tumor microenvironment. Here, an oxygen independent biomimetic nanoplatform based on carbon sphere dotted with cerium oxide and coated by cell membrane (MCSCe) was designed and synthesized with good biocompatibility, homologous targeting ability, and improved photophysical activity. Notably, MCSCe could realize accumulation of hydrogen peroxide (H2O2) in tumor cells and hyperthermia under single laser (808â¯nm) irradiation, which were simultaneously utilized by itself to produce more toxic hydroxyl radical (OH). Resultantly, the synergistic therapeutic effect against tumor cells was obtained under near infrared (NIR) laser irradiation.
Assuntos
Temperatura Alta , Radical Hidroxila/química , Raios Infravermelhos , Nanoestruturas/química , Neoplasias/terapia , Animais , Materiais Biocompatíveis/química , Morte Celular , Linhagem Celular Tumoral , Membrana Celular/metabolismo , Cério/química , Endocitose , Feminino , Humanos , Peróxido de Hidrogênio/química , Lasers , Potencial da Membrana Mitocondrial , Camundongos Endogâmicos BALB C , Nanoestruturas/ultraestrutura , Neoplasias/patologia , Superóxido Dismutase/metabolismo , Superóxidos/química , Distribuição TecidualRESUMO
It is generally accepted that biodegradable materials greatly influence the nearby microenvironment where cells reside; however, the range of interfacial properties has seldom been discussed due to technical bottlenecks. This study aims to depict biomaterial microenvironment boundaries by correlating interfacial H+ distribution with surrounding cell behaviors. Using a disuse-related osteoporotic mouse model, we confirmed that the abnormal activated osteoclasts could be suppressed under relatively alkaline conditions. The differentiation and apatite-resorption capability of osteoclasts were "switched off" when cultured in titrated material extracts with pH values higher than 7.8. To generate a localized alkaline microenvironment, a series of borosilicates were fabricated and their interfacial H+ distributions were monitored spatiotemporally by employing noninvasive microtest technology. By correlating interfacial H+ distribution with osteoclast "switch on/off" behavior, the microenvironment boundary of the tested material was found to be 400 ± 50 µm, which is broader than the generally accepted value, 300 µm. Furthermore, osteoporotic mice implanted with materials with higher interfacial pH values and boarder effective ranges had lower osteoclast activities and a thicker new bone. To conclude, effective proton microenvironment boundaries of degradable biomaterials were depicted and a weak alkaline microenvironment was shown to promote regeneration of osteoporotic bones possibly by suppressing abnormal activated osteoclasts.
Assuntos
Materiais Biocompatíveis/química , Regeneração Óssea , Meios de Cultura/química , Animais , Materiais Biocompatíveis/farmacologia , Doenças Ósseas/metabolismo , Doenças Ósseas/patologia , Regeneração Óssea/efeitos dos fármacos , Diferenciação Celular/efeitos dos fármacos , Modelos Animais de Doenças , Durapatita/química , Feminino , Concentração de Íons de Hidrogênio , Masculino , Metaloproteinase 9 da Matriz/genética , Metaloproteinase 9 da Matriz/metabolismo , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismo , Camundongos , Camundongos Endogâmicos C57BL , Osteoclastos/citologia , Osteoclastos/metabolismo , Osteogênese/efeitos dos fármacos , Células RAW 264.7 , Ratos , Ratos Sprague-DawleyRESUMO
Although poly(methylmethacrylate) (PMMA) cements are widely used in orthopaedics, they have numerous drawbacks. This study aimed to improve their bioactivity and osseointegration by incorporating strontium-containing borate bioactive glass (SrBG) as the reinforcement phase and bioactive filler of PMMA cement. The prepared SrBG/PMMA composite cements showed significantly decreased polymerization temperature when compared with PMMA and retained properties of appropriate setting time and high mechanical strength. The bioactivity of SrBG/PMMA composite cements was confirmed in vitro, evidenced by ion release (Ca, P, B and Sr) from SrBG particles. The cellular responses of MC3T3-E1 cells in vitro demonstrated that SrBG incorporation could promote adhesion, migration, proliferation and collagen secretion of cells. Furthermore, our in vivo investigation revealed that SrBG/PMMA composite cements presented better osseointegration than PMMA bone cement. SrBG in the composite cement could stimulate new-bone formation around the interface between the composite cement and host bone at eight and 12 weeks post-implantation, whereas PMMA bone cement only stimulated development of an intervening connective tissue layer. Consequently, the SrBG/PMMA composite cement may be a better alternative to PMMA cement in clinical applications and has promising orthopaedic applications by minimal invasive surgery.
Assuntos
Cimentos Ósseos/química , Boratos/química , Vidro/química , Polimetil Metacrilato/química , Estrôncio/química , Animais , Materiais Biocompatíveis , Desenvolvimento Ósseo , Movimento Celular , Masculino , Camundongos , Células NIH 3T3 , Ratos , Ratos Sprague-Dawley , Microtomografia por Raio-XRESUMO
By virtue of its excellent bioactivity and osteoconductivity, calcium phosphate cement (CPC) has been applied extensively in bone engineering. Doping a trace element into CPC can change physical characteristics and enhance osteogenesis. The trace element lithium has been demonstrated to stimulate the proliferation and differentiation of osteoblasts. We investigated the fracture-healing effect of osteoporotic defects with lithium-doped calcium phosphate cement (Li/CPC) and the underlying mechanism. Li/CPC bodies immersed in simulated body fluid converted gradually to hydroxyapatite. Li/CPC extracts stimulated the proliferation and differentiation of osteoblasts upon release of lithium ions (Li+) at 25.35 ± 0.12 to 50.74 ± 0.13 mg/l through activation of the Wnt/ß-catenin pathway in vitro. We also examined the effect of locally administered Li+ on defects in rat tibia between CPC and Li/CPC in vivo. Micro-computed tomography and histological staining showed that Li/CPC had better osteogenesis by increasing bone mass and promoting repair in defects compared with CPC (P < 0.05). Li/CPC also showed better osteoconductivity and osseointegration. These findings suggest that local release of Li+ from Li/CPC may accelerate bone regeneration from injury through activation of the Wnt/ß-catenin pathway in osteoporosis.
Assuntos
Cimentos Ósseos/farmacologia , Regeneração Óssea , Durapatita/farmacologia , Cloreto de Lítio/farmacologia , Fraturas por Osteoporose/terapia , Via de Sinalização Wnt , Animais , Cimentos Ósseos/química , Cimentos Ósseos/uso terapêutico , Linhagem Celular , Liberação Controlada de Fármacos , Durapatita/uso terapêutico , Feminino , Cloreto de Lítio/farmacocinética , Cloreto de Lítio/uso terapêutico , Camundongos , Osteoblastos/citologia , Osteoblastos/efeitos dos fármacos , Osteoblastos/metabolismo , Osteogênese , Ratos , Ratos Sprague-DawleyRESUMO
There is a need for synthetic biomaterials to heal bone defects using minimal invasive surgery. In the present study, an injectable cement composed of bioactive borate glass particles and a chitosan bonding solution was developed and evaluated for its capacity to heal bone defects in a rabbit femoral condyle model. The injectability and setting time of the cement in vitro decreased but the compressive strength increased (8±2MPa to 31±2MPa) as the ratio of glass particles to chitosan solution increased (from 1.0gml-1 to 2.5gml-1). Upon immersing the cement in phosphate-buffered saline, the glass particles reacted and converted to hydroxyapatite, imparting bioactivity to the cement. Osteoblastic MC3T3-E1 cells showed enhanced proliferation and alkaline phosphatase activity when incubated in media containing the soluble ionic product of the cement. The bioactive glass cement showed a better capacity to stimulate bone formation in rabbit femoral condyle defects at 12weeks postimplantation when compared to a commercial calcium sulfate cement. The injectable bioactive borate glass cement developed in this study could provide a promising biomaterial to heal bone defects by minimal invasive surgery.
Assuntos
Materiais Biocompatíveis/farmacologia , Cimentos Ósseos/farmacologia , Boratos/farmacologia , Fêmur/patologia , Cimentos de Ionômeros de Vidro/farmacologia , Injeções , Cicatrização/efeitos dos fármacos , Fosfatase Alcalina/metabolismo , Animais , Morte Celular/efeitos dos fármacos , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Forma Celular/efeitos dos fármacos , Força Compressiva , Modelos Animais de Doenças , Fêmur/diagnóstico por imagem , Fêmur/efeitos dos fármacos , Imageamento Tridimensional , Implantes Experimentais , Teste de Materiais , Camundongos , Imagem Óptica , Coelhos , Espectroscopia de Infravermelho com Transformada de Fourier , Temperatura , Difração de Raios X , Microtomografia por Raio-XRESUMO
The development of an optimal animal model that could provide fast assessments of the interaction between bone and orthopedic implants is essential for both preclinical and theoretical researches in the design of novel biomaterials. Compared with other animal models, mice have superiority in accessing the well-developed transgenic modification techniques (e.g., cell tracing, knockoff, knockin, and so on), which serve as powerful tools in studying molecular mechanisms. In this study, we introduced the establishment of a mouse model, which was specifically tailored for the assessment of bone-implant interaction in a load-bearing bone marrow microenvironment and could potentially allow the molecular mechanism study of biomaterials by using transgenic technologies. The detailed microsurgery procedures for developing a bone defect (Φ = 0.8 mm) at the metaphysis region of the mouse femur were recorded. According to our results, the osteoconductive and osseointegrative properties of a well-studied 45S5 bioactive glass were confirmed by utilizing our mouse model, verifying the reliability of this model. The feasibility and reliability of the present model were further checked by using other materials as objects of study. Furthermore, our results indicated that this animal model provided a more homogeneous tissue-implant interacting surface than the rat at the early stage of implantation and this is quite meaningful for conducting quantitative analysis. The availability of transgenic techniques to mechanism study of biomaterials was further testified by establishing our model on Nestin-GFP transgenic mice. Intriguingly, the distribution of Nestin+ cells was demonstrated to be recruited to the surface of 45S5 glass as early as 3 days postsurgery, indicating that Nestin+ lineage stem cells may participate in the subsequent regeneration process. In summary, the bone-implant interaction mouse model could serve as a potential candidate to evaluate the early stage tissue response near the implant surface in a bone marrow microenvironment, and it also shows great potential in making transgenic animal resource applicable to biomaterial studies, so that the design of novel biomaterials could be better guided.
Assuntos
Materiais Biocompatíveis/química , Osso e Ossos/fisiologia , Osseointegração/fisiologia , Osteoblastos/fisiologia , Próteses e Implantes , Animais , Osso e Ossos/citologia , Diferenciação Celular , Células Cultivadas , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Modelos Animais , Osteoblastos/citologia , Ratos , Ratos Sprague-DawleyRESUMO
Electrospun PLGA-based scaffolds have been applied extensively in biomedical engineering, such as tissue engineering and drug delivery system. Due to lack of the recognition sites on cells, hydropholicity and single-function, the applications of PLGA fibrous scaffolds are limited. In order to tackle these issues, many works have been done to obtain functional PLGA-based scaffolds, including surface modifications, the fabrication of PLGA-based composite scaffolds and drug-loaded scaffolds. The functional PLGA-based scaffolds have significantly improved cell adhesion, attachment and proliferation. Moreover, the current study has summarized the applications of functional PLGA-based scaffolds in wound dressing, vascular and bone tissue engineering area as well as drug delivery system.