Bioconversion of spray corn husks into L-lactic acid with liquid hot water pretreatment.

Agricultural by-products like rice husk, bran, and spray corn husks, often utilized as feed, are considered less desirable. This study aims to enhance the utilization rate of these materials by subjecting then to liquid hot water (LHW) pretreatment, followed by enzymatic hydrolysis to produce fermentable sugars. We investigated the production of L-lactic acid using two methods: simultaneous saccharification fermentation (SSF) and separate hydrolysis fermentation (SHF), following varying intensities of LHW pretreatment. The results showed that the optimal enzymatic hydrolysis efficiency was achieved from spray corn husks under the pretreatment conditions of 155 °C and 15 min. SHF was generally more effective than SSF. The glucose L-lactic acid conversion rate in SHF using spray corn husks can reach more than 90 %. Overall, this work proposed a novel, environmental-friendly strategy for efficient and for L- lactic acid production from spray corn husks.

A bacterial cellulose/polyvinyl alcohol/nitro graphene oxide double layer network hydrogel efficiency antibacterial and promotes wound healing.

In this study, graphene oxide (GO) was chemically modified utilizing concentrated nitric acid to produce a nitrated graphene oxide derivative (NGO) with enhanced oxidation level, improved dispersibility, and increased antibacterial activity. A double-layer composite hydrogel material (BC/PVA/NGO) with a core-shell structure was fabricated by utilizing bacterial cellulose (BC) and polyvinyl alcohol (PVA) binary composite hydrogel scaffold as the inner network template, and hydrophilic polymer (PVA) loaded with antibacterial material (NGO) as the outer network. The fabrication process involved physical crosslinking based on repeated freezing and thawing. The resulting BC/PVA/NGO hydrogel exhibited a porous structure, favorable mechanical properties, antibacterial efficacy, and biocompatibility. Subsequently, the performance of BC/PVA/NGO hydrogel in promoting wound healing was evaluated using a mouse skin injury model. The findings demonstrated that the BC/PVA/NGO hydrogel treatment group facilitated improved wound healing in the mouse skin injury model compared to the control group and the BC/PVA group. This enhanced wound healing capability was attributed primarily to the excellent antibacterial and tissue repair properties of the BC/PVA/NGO hydrogel.

Conformational and rheological properties of bacterial cellulose sulfate.

In this study, a water-soluble bacterial cellulose sulfate (BCS) was prepared with sulfur trioxide pyridine complex (SO3· Py) in a lithium chloride (LiCl)/dimethylacetamide (DMAc) homogeneous solution system using bacterial cellulose (BC). The structural study showed that the value for the degrees of substitution of BCS was 1.23. After modification, the C-6 hydroxyl group of BC was completely substituted and the C-2 and C-3 hydroxyl groups were partially substituted. In an aqueous solution, the BCS existed as a linear polymer with irregular coil conformation, which was consistent with the findings observed using atomic force microscopy. The steady-state shear flow and dynamic viscoelasticity were systematically determined over a range of BCS concentrations (1 %-4 %, w/v) and temperature (5 °C-50 °C). Steady-state flow experiments revealed that BCS exhibited shear thinning behavior, which increased with an increase in concentration and a decrease in temperature. These observations were quantitatively demonstrated using the cross model. Moreover, based on the dynamical viscoelastic properties, we confirmed that BCS was a temperature-sensitive and weak elastic gel, which was somewhere between a dilute solution and an elastic gel. Therefore, considering the special synthetic strategy and rheological behavior, BCS might be used as a renewable material in the field of biological tissue engineering, especially in the manufacture of injectable hydrogels, cell scaffolds, and as a drug carrier.