Ultra-Hydrophobic Gauze Driving Super-Haemostasis.

Controlling bleeding by applying pressing cotton gauze is the most facile treatment in prehospital emergencies. However, the wettable nature of cotton fibers leads to unnecessary blood loss due to excessive blood absorption, inseparable adhesion-induced pain, and pliable to infection. Here, a kind of ultra-hydrophobic haemostatic anti-adhesive gauze whose surface is loaded with polydimethylsiloxane (PDMS) and hydrophobic-modified cellulose nanocrystals (CNCs), achieving a water contact angle of ≈160° is developed. It is demonstrated that the mechanism by which hydrophobic CNCs promote blood clotting is associated with their ability to activate coagulation factors, contributing to fibrin formation, and promoting platelet activation. The blood-restricting effect results from the low surface energy layer formed by PDMS and then the alkyl chains of hydrophobic CNCs are combined. The produced ultra-hydrophobic gauze resists blood flow and diffusion, decreases blood loss, is effortlessly peelable, and minimizes pathogen adhesion. Compared to the commercial cotton gauze, this gauze achieved effective haemostasis and antiadhesion by reducing blood loss by more than 90%, shortening haemostasis time by more than 75%, lowering peeling force by more than 90% and minifying bacterium attachment by more than 95%. This work presents promising applications in terms of prehospital first aid.

Platelet Vesicles Synergetic with Biosynthetic Cellulose Aerogels for Ultra-Fast Hemostasis and Wound Healing.

Achieving hemostasis in penetrating and irregular wounds is challenging because the hemostasis factor cannot arrive at the bleeding site, and substantial bleeding will wash away the blood clot. Since the inherently gradual nature of blood clot formation takes time, a physical barrier is needed before blood clot formation. Herein, an ultra-light and shape memory hemostatic aerogel consisting of oxidized bacterial cellulose (OBC) and platelet extracellular vesicles (pVEs) is reported. The OBC-pVEs aerogel provides a physical barrier for the bleeding site by self-expansion, absorbing the liquid from blood to concentrate platelets and clotting factors and accelerating the clot formation by activating platelets and transforming fibrinogen into fibrin. In the rat liver and tail injury models, the blood loss decreases by 73% and 59%, and the bleeding times are reduced by 55% and 62%, respectively. OBC-pVEs aerogel has also been shown to accelerate wound healing. In conclusion, this work introduces an effective tool for treating deep, non-compressible, and irregular wounds and offers valuable strategies for trauma bleeding and wound treatment.

Bioactive and electrically conductive GelMA-BG-MWCNT nanocomposite hydrogel bone biomaterials.

Natural bone is a complex organic-inorganic composite tissue that possesses endogenous electrically conductive properties in response to mechanical forces. Mimicking these unique properties collectively in a single synthetic biomaterial has so far remained a formidable task. In this study, we report a synthesis strategy that comprised gelatin methacryloyl (GelMA), sol-gel derived tertiary bioactive glass (BG), and uniformly dispersed multiwall carbon nanotubes (MWCNTs) to create nanocomposite hydrogels that mimic the organic-inorganic composition of bone. Using this strategy, biomaterials that are electrically conductive and possess electro-mechanical properties similar to endogenous bone were prepared without affecting their biocompatibility. Nanocomposite hydrogel biomaterials were biodegradable and promoted biomineralization, and supported multipotent mesenchymal progenitor cell (10T1/2) cell interactions and differentiation into an osteogenic lineage. To the best of our knowledge, this work presents the first study to functionally characterize suitable electro-mechanical responses in nanocomposite hydrogels, a key process that occurs in the natural bone to drive its repair and regeneration. Overall, the results demonstrated GelMA-BG-MWCNT nanocomposite hydrogels have the potential to become promising bioactive biomaterials for use in bone repair and regeneration.

Global meta-analysis reveals differential effects of microplastics on soil ecosystem.

A large number of individual studies and meta-analyses have shown that microplastics (MPs) affect soil ecosystems. However, the effects of different concentrations and types of MPs on soil ecosystem are still unclear. Here, a comprehensive meta-analysis was performed to examine the responses of 19 variables, associated with soil properties, microbes, enzymes, and fauna, to MPs, based on 114 peer-reviewed studies. The results showed that the addition of MPs significantly reduced the soil organic carbon (SOC), total nitrogen (TN), NH4+-N, pH, and diversity of bacteria, and increased the dissolved organic carbon (DOC), diversity of fungi and enzyme activities, especially enzymes related to the biogeochemical cycle. We further discussed that soil MPs exerted negative effects on soil fauna, including survival, growth, and reproduction, and that the concentration of MPs, rather than the type, was the biggest driving factor causing the toxicity of MPs affecting soil animals. More importantly, the concentrations of MPs were the main factor affecting the DOC, TN, NO3--N, total phosphorus (TP), available phosphorus (AP), and diversity of fungi, whereas the types of MPs were the main factors reflected in the SOC, NH4+-N, pH, diversity of bacteria, and enzyme activities. This study aimed to evaluate the response of soil ecosystems to the different concentrations and types of MPs, and the largest driving factor for the toxicity of MPs.

Polystyrene microplastics enhance the microcystin-LR-induced gonadal damage and reproductive endocrine disruption in zebrafish.

The coexistence of eutrophication and plastic pollution in the aquatic environment is becoming a realistic water pollution problem worldwide. To investigate the microcystin-LR (MC-LR) bioavailability and the underlying reproductive interferences in the presence of polystyrene microplastic (PSMPs), zebrafish (Danio rerio) were exposed to individual MC-LR (0, 1, 5, and 25 µg/L) and combined MC-LR + PSMPs (100 µg/L) for 60 d. Our results showed that the existence of PSMPs increased the accumulation of MC-LR in zebrafish gonads compared to the MC-LR-only group. In the MC-LR-only exposure group, seminiferous epithelium deterioration and widened intercellular spaces were observed in the testis, and basal membrane disintegration and zona pellucida invagination were noticed in the ovary. Moreover, the existence of PSMPs exacerbated these injuries. The results of sex hormone levels showed that PSMPs enhanced MC-LR-induced reproductive toxicity, which is tightly related to the abnormal increase of 17ß-estradiol (E2) and testosterone (T) levels. The changes of gnrh2, gnrh3, cyp19a1b, cyp11a, and lhr mRNA levels in the HPG axis further proved that MC-LR combined with PSMPs aggravated reproductive dysfunction. Our results revealed that PSMPs could increase the MC-LR bioaccumulation by serving as a carrier and exaggerate the MC-LR-induced gonadal damage and reproductive endocrine disruption in zebrafish.

Hydrophobic Polystyrene-Modified Gelatin Enhances Fast Hemostasis and Tissue Regeneration in Traumatic Brain Injury.

Hemostatic sealant is required to deal with blood loss, especially in the scenario of traumatic brain injury (TBI), which presents high rates of morbidity and disability. Hemostasis in surgery with traditional gelatin-based sealants often leads to blood loss and other issues in brain because of the hydrophilic gelatin swelling. Herein, hydrophobic effects on the hemostasis in TBI surgery are studied by tuning the chain length of polystyrene (PS) onto methylacrylated gelatin (Gel-MA). The hydrophobicity and hemostatic efficiency can be tuned by controlling the length of PS groups. The platelet activation of modified sealants Gel-MA-2P, Gel-MA-P, and Gel-MA-0.5P is as much as 17.5, 9.1, and 2.1 times higher than Gel-MA in vitro. The hemostatic time of Gel-MA-2P, Gel-MA-P, and Gel-MA-0.5P groups is 2.0-, 1.6-, and 1.1-folds faster than that in Gel-MA group in TBI mice. Increased formation of fibrins and platelet aggregation can also be observed in vitro by scanning electron microscopy. Animal's mortality is lowered by 46%, neurologic deficiency is reduced by 1.5 times, and brain edema is attenuated by 10%. Protein expression is further investigated to exhibit toxic iron-related processes caused by delayed hemostasis and activation of platelets via PI3K/PKC-α signaling. The hydrophobic Gel-MA has the potential in hemostatic TBI and promotes nervous system recovery in brain with the potentials in clinics.

A biodegradable composite filter made from electrospun zein fibers underlaid on the cellulose paper towel.

Conventional petroleum-based synthetic polymeric fiber filter materials for separation may cause secondary pollution to the environment due to their non-degradable properties. Herein, we report a facile method of preparation of a biodegradable composite filter that can achieve filtration for air by underlaying the commercialized cellulose paper towel under electrospun zein fibers. The morphology of zein fibers was successfully steered via varying the weight ratios of ethanol/deionized water mixture solvent, as a result, the round or flat ribbon fibers were obtained. The effect of zein fiber morphology on air filtration performance was investigated both experimentally and theoretically. It was found that the flat ribbon fiber filter had a higher filtration efficiency (99%) for PM0.3 removal and a lower pressure drop (109 Pa) compared with the round zein fiber filter. Notably, the as-prepared composite filter can be biodegradable easily, contributing to green ecological environment. This work shows an efficient way to develop biodegradable filtration materials with the cheap price, easy availability of component materials, exhibiting a great potential application in air filtration area.

Emission of PAHs, PCBs, PBDEs and heavy metals in air, water and soil around a waste plastic recycling factory in an industrial park, Eastern China.

Environmental information in recovery of waste plastic in a certificated factory in industrial park in Eastern China is provided in this paper. The process involves raw material storage, washing, closed crushing, closed regeneration, product storage, and waste storage. Particulate matters, heavy metals, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyis (PCBs), and polybrominated diphenyl ethers (PBDEs) emitted from the production process are analyzed. A total of 25 atmospheric samples, 6 soil samples, and 2 water samples are sampled in and around the factory. The following conclusions could be concluded: (1) the concentrations of Cu and Pb are significantly higher than that of Ni, Cr and Cd in total suspended particulate matters; (2) PHE, DghiP, NAP and FLA are the main PAHs components in the air; PHE, FLA, DghiP, NAP, and PYR are the main congeners of PAHs in both washing wastewater and surface water; PHE, NAP, FLA, and CHR are the major congeners in the soil samples; (3) PCB-18, PCB-17 and PCB-31,28 are the main congeners in the air samples; PCB-70 and PCB-110 are the main congeners in soil samples; PCB-49 and PCB-52 are the main congeners in both surface water and washing wastewater; (4) DBDPE and BDE-209 are the main congeners for the all air, water and soil samples. Washing process and crushing process are identified as the main sources of all the above pollutants releases, and management strategies are provided to reduce the pollutants emission and the environmental hazardous caused by the waste plastic recovery process.

Isolation of hierarchical cellulose building blocks from natural flax fibers as a separation membrane barrier.

Cellulose nanofibrils (CNF) is a natural nanomaterial composed of biomacromolecules that can be extracted from plants and has great potential applications in many fields due to its excellent regenerative, sustainable, and biodegradable properties. In this work, the flax CNF with hierarchical scales was obtained by using the flax fibers (FF) treated with different concentrations of alkaline solution, followed by the TEMPO-mediated ternary oxidation and mechanical treatment. Subsequently, the resultant CNF was implanted on the commercial filter paper as a surface barrier for oil/water preparation. The changes of cellulose crystal form and crystallinity caused by alkali treatment on FF were studied by Fourier transform infrared spectroscopy and X-ray diffraction. Morphological changes of FF before and after alkali treatment were observed. The morphology of obtained CNF was examined. Moreover, the transmittance of the prepared CNF suspension and films was also investigated by a UV spectroscopy. The prepared modified filter paper can effectively separate the oil/water mixture, which gives themselves promise as candidates in practical applications of oil/water separation.

Short fluorocarbon chains containing hydrophobic nanofibrous membranes with improved hemocompatibility, anticoagulation and anti-fouling performance.

Thromboembolic diseases have become one of the most hazardous and mortal diseases to human life. In this paper, a highly hydrophobic nanofibrous membrane was prepared via electrospinning of PCL-b-PHFBA (polycaprolactone -b- poly (heptafluoro butyl acrylate)) block copolymers. The nanofibrous membranes showed high hydrophobicity with a water contact angle of ˜136° due to their rough nanofibrous surface morphology and contained small portion of short fluorocarbon chain polymer PHFBA. According to the results of whole blood clotting time (CT), prothrombin time (PT), activated partial thromboplastin time (APTT), plasma re-calcification time test (PRT), platelets adhesion and the ultra-low hemolysis rate of 1.13% to red blood cells (RBCs), the membranes exhibited interesting anticoagulant and decreased-platelet adhesion performance. PCL-b-PHFBA nanofibrous membranes showed mild anti-fouling activity, reduced Bovine Serum albumin (BSA) protein absorption and bacterial adhesion compared with PCL nanofibrous membranes. The introduction of PHFBA component did not lead to any obvious cytotoxicity according to the cytocompatibility and cell adhesion study, suggesting that the PCL-b-PHFBA nanofibrous membranes are promising for blood related applications by minimizing the coagulation, hemolysis, BSA protein adsorption, bacterial attachment and platelet adhesion.

Plasmonic-Assisted Graphene Oxide Artificial Muscles.

Muscles and joints make highly coordinated motion, which can be partly mimicked to drive robots or facilitate activities. However, most cases primarily employ actuators enabling simple deformations. Therefore, a mature artificial motor system requires many actuators assembled with jointed structures to accomplish complex motions, posing limitations and challenges to the fabrication, integration, and applicability of the system. Here, a holistic artificial muscle with integrated light-addressable nodes, using one-step laser printing from a bilayer structure of poly(methyl methacrylate) and graphene oxide compounded with gold nanorods (AuNRs), is reported. Utilizing the synergistic effect of the AuNRs with high plasmonic property and wavelength-selectivity as well as graphene with good flexibility and thermal conductivity, the artificial muscle can implement full-function motility without further integration, which is reconfigurable through wavelength-sensitive light activation. A biomimetic robot and artificial hand are demonstrated, showcasing functionalized control, which is desirable for various applications, from soft robotics to human assists.

Cytomembrane Infused Polymer Accelerating Delivery of Myelin Antigen Peptide to Treat Experimental Autoimmune Encephalomyelitis.

While there has been extensive development of soluble epitope-specific peptides to induce immune tolerance for the treatment of autoimmune diseases, the clinical efficacy of soluble-peptides-based immunotherapy was still uncertain. Recent strategies to develop antigen carriers coupled with peptides have shown promising results in preclinical animal models. Here we developed functional amphiphilic hyperbranched (HB) polymers with different grafting degrees of hydrophobic chains as antigen myelin antigen oligodendrocyte glycoprotein (MOG) peptide carriers and evaluated their ability to induce immune tolerance. We show that these polymers could efficiently deliver antigen peptide, and the uptake amount by bone marrow dendritic cells (BMDCs) was correlated with the hydrophobicity of polymers. We observe that these polymers have a higher ability to activate BMDCs and a higher efficacy to induce antigen-specific T cell apoptosis than soluble peptides, irrespective of hydrophobicity. We show that intravenous injection of polymer-conjugated MOG peptide, but not soluble peptide, markedly treats the clinical symptoms of experimental autoimmune encephalomyelitis in mice. Together, these results demonstrate the potential for using amphiphilic HB polymers as antigen carriers to deliver peptides for pathogenic autoreactive T cell deletion/tolerance strategies to treat autoimmune disorders.

Polymer Self-Assembled BMSCs with Cancer Tropism and Programmed Homing.

Targeted therapy can improve the accuracy of diagnosis and treatment in the field of cancer management. Cellular surface engineering can enhance cell functions via mounting functional molecules onto cellular membranes. A novel amphiphilic hyperbranched polymer (AHP) conjugated with oleic acid (OA) and tumor-targeted ligand folic acid (FA) is employed. The lipophilic chain can self-assemble and infuse with the cytomembrane of bone marrow mesenchymal stem cells (BMSCs) with the end of FA left on the outside for targeting. The polymer tailored BMSCs can enhance tumor tropism in gastric cancer. BMSCs are characterized by the low immunogenicity and tumor tropism, which makes them promising targeting carriers. Regarding the integrated advantages of these two vectors, it is demonstrated that the functional amphiphilic AHP-OA-FA enhances the tumor tropism of BMSCs. Flow cytometry, standard MTT assay, and wound-healing assay show that AHP-OA-FA has no influence on CD expression, proliferative capacity, and cell motility of BMSCs, respectively. Furthermore, in vitro transwell assay and ex vivo fluorescence image verify that AHP-OA-FA enhances tumor tropism of BMSCs compared to BMSCs and AHP-OA-Rhodamine B-BMSCs. Finally, histological analysis demonstrates that AHP-OA-FA causes no damage to major organs. The results of this study suggest that living BMSCs self-assembled with a polymer might be a promising vehicle for targeted delivery to cancer cells.

Egg Albumen as a Fast and Strong Medical Adhesive Glue.

Sutures penetrate tissues to close wounds. This process leads to inflammatory responses, prolongs healing time, and increases operation complexity. It becomes even worse when sutures are applied to stress-sensitive and fragile tissues. By bonding tissues via forming covalent bonds, some medical adhesives are not convenient to be used by surgeons and have side effects to the tissues. Here egg albumen adhesive (EAA) is reported with ultrahigh adhesive strength to bond various types of materials and can be easily used without any chemical and physical modifications. Compared with several commercial medical glues, EAA exhibits stronger adhesive property on porcine skin, glass, polydimethylsiloxane. The EAA also shows exceptional underwater adhesive strength. Finally, wound closure using EAA on poly(caprolactone) nanofibrous sheet and general sutures is investigated and compared in a rat wound model. EAA also does not show strong long-term inflammatory response, suggesting that EAA has potential as a medical glue, considering its abundant source, simple fabrication process, inherent nontoxicity, and low cost.

Preparation and properties of calcium citrate nanosheets for bone graft substitute.

A convenient and effective soft chemical method is presented for the synthesis of nano-scaled calcium citrate sheets. The preparation involved the precipitation of nano-calcium citrate by adding ethanol to reach the super saturation state of a solution containing calcium and citrate salts. The obtained nano-calcium citrate formed nanosheets, with the following dimensions: width of about 50∼500 nm and thickness of about 8∼30 nm. The results of the XRD analysis confirmed that the obtained sample is calcium citrate tetrahydrate, and the crystal degree decreased with an increase quantity of ethanol added. Animal experiments showed that the calcium citrate can promote the formation of new bone.

Bioinspired Underwater Superoleophobic Membrane Based on a Graphene Oxide Coated Wire Mesh for Efficient Oil/Water Separation.

Inspired from fish scales that exhibit unique underwater superoleophobicity because of the presence of micronanostructures and hydrophilic slime on their surface, we reported here the facile fabrication of underwater superoleophobic membranes by coating a layer of graphene oxide (GO) on commercially available wire meshes with tunable pore sizes. Using the wire mesh as a ready-made mask, GO-embellished mesh with open apertures (GO@mesh) could be readily fabricated after subsequent O2 plasma treatments from the back side. Interestingly, the congenital microstructures of the crossed microwires in combination with the abundant hydrophilic oxygen-containing groups of the GO layer endow the resultant GO@mesh with unique underwater superoleophobic properties. The antioil tests show that the underwater contact angles of various oils including both organic reagents (undissolved in water) and vegetable oil on GO@mesh exceed 150°, indicating the superoleophobic nature. In a representative experiment, a mixture of bean oil and water that imitates culinary sewage has been well separated with the help of our GO@mesh. GO-embellished wire meshes may find broad applications in sewage purification, especially for the treatment of oil contaminations.