Biodegradable elastomers and silicon nanomembranes/nanoribbons for stretchable, transient electronics, and biosensors.

Transient electronics represents an emerging class of technology that exploits materials and/or device constructs that are capable of physically disappearing or disintegrating in a controlled manner at programmed rates or times. Inorganic semiconductor nanomaterials such as silicon nanomembranes/nanoribbons provide attractive choices for active elements in transistors, diodes and other essential components of overall systems that dissolve completely by hydrolysis in biofluids or groundwater. We describe here materials, mechanics, and design layouts to achieve this type of technology in stretchable configurations with biodegradable elastomers for substrate/encapsulation layers. Experimental and theoretical results illuminate the mechanical properties under large strain deformation. Circuit characterization of complementary metal-oxide-semiconductor inverters and individual transistors under various levels of applied loads validates the design strategies. Examples of biosensors demonstrate possibilities for stretchable, transient devices in biomedical applications.

Epidermal electronics with advanced capabilities in near-field communication.

Epidermal electronics with advanced capabilities in near field communications (NFC) are presented. The systems include stretchable coils and thinned NFC chips on thin, low modulus stretchable adhesives, to allow seamless, conformal contact with the skin and simultaneous capabilities for wireless interfaces to any standard, NFC-enabled smartphone, even under extreme deformation and after/during normal daily activities.

Electronic sensor and actuator webs for large-area complex geometry cardiac mapping and therapy.

Curved surfaces, complex geometries, and time-dynamic deformations of the heart create challenges in establishing intimate, nonconstraining interfaces between cardiac structures and medical devices or surgical tools, particularly over large areas. We constructed large area designs for diagnostic and therapeutic stretchable sensor and actuator webs that conformally wrap the epicardium, establishing robust contact without sutures, mechanical fixtures, tapes, or surgical adhesives. These multifunctional web devices exploit open, mesh layouts and mount on thin, bio-resorbable sheets of silk to facilitate handling in a way that yields, after dissolution, exceptionally low mechanical moduli and thicknesses. In vivo studies in rabbit and pig animal models demonstrate the effectiveness of these device webs for measuring and spatially mapping temperature, electrophysiological signals, strain, and physical contact in sheet and balloon-based systems that also have the potential to deliver energy to perform localized tissue ablation.

Microstructured elastomeric surfaces with reversible adhesion and examples of their use in deterministic assembly by transfer printing.

Reversible control of adhesion is an important feature of many desired, existing, and potential systems, including climbing robots, medical tapes, and stamps for transfer printing. We present experimental and theoretical studies of pressure modulated adhesion between flat, stiff objects and elastomeric surfaces with sharp features of surface relief in optimized geometries. Here, the strength of nonspecific adhesion can be switched by more than three orders of magnitude, from strong to weak, in a reversible fashion. Implementing these concepts in advanced stamps for transfer printing enables versatile modes for deterministic assembly of solid materials in micro/nanostructured forms. Demonstrations in printed two- and three-dimensional collections of silicon platelets and membranes illustrate some capabilities. An unusual type of transistor that incorporates a printed gate electrode, an air gap dielectric, and an aligned array of single walled carbon nanotubes provides a device example.

Stretchable semiconductor technologies with high areal coverages and strain-limiting behavior: demonstration in high-efficiency dual-junction GaInP/GaAs photovoltaics.

Notched islands on a thin elastomeric substrate serve as a platform for dual-junction GaInP/GaAs solar cells with microscale dimensions and ultrathin forms for stretchable photovoltaic modules. These designs allow for a high degree of stretchability and areal coverage, and they provide a natural form of strain-limiting behavior, helping to avoid destructive effects of extreme deformations.

Scaling Metal-Elastomer Composites toward Stretchable Multi-Helical Conductive Paths for Robust Responsive Wearable Health Devices.

Stretchable electronics have advanced rapidly and many applications require high repeatability and robustness under various mechanical deformations. It has been described here that how a highly stretchable and reliable conductor composite made from helical copper wires and a soft elastomer, named eHelix, can provide mechanically robust and strain-insensitive electronic conductivity for wearable devices. The reversibility of the mechanical behavior of the metal-elastomer system has been studied using finite element modeling methods. Optimal design parameters of such helical metal-elastomer structures are found. The scaling of multiple copper wires into such helical shapes to form a Multi-eHelix system is further shown. With the same elastomer volume, Multi-eHelix has more conductive paths and a higher current density than the single-eHelix. Integrations of these eHelix stretchable conductors with fabrics showed wearable displays that can survive machine-washes and hundreds of mechanical loading cycles. The integration of the eHelix developed by us with a wearable optical heart rate sensor enabled a wearable health monitoring system that can display measured heart rates on clothing. Furthermore, Multi-eHelix conductors are used to connect flexible printed circuit boards and piezoresistive sensors on a tactile sensing glove for the emerging sensorized prosthetics.

Effect of surface functionality of molecularly imprinted composite nanospheres on specific recognition of proteins.

The surface functionality of biomaterial plays a primary role in determining its application in biorecognition and drug delivery. In our work, three types of synthetic tailoring polymer nanospheres with hierarchical architecture were constructed to obtain functional polymer layer with disparate chemical motifs for protein adsorption via surface imprinting and grafting copolymerization. In this polymerization system, the structure stability of template protein bovine serum albumin (BSA) is well maintained within a certain range, which facilitated the accurate imprinting and precise identification. A comprehensive protocol for screening different functional layer is proposed through comparing the adsorption behavior, selectivity, identification and responsiveness to medium pH of three functional layers. Our study demonstrates that surface functionality greatly influences the adsorption capacity and selectivity of adsorption material. The functional layer with ionic liquid structure that could only provide multiple non-covalent binding sites is beneficial to the proteins aggregation and extraction, while the anti-nonspecific binding functional layer of biomaterial with zwitterionic structure for specific protein capture is promising to serve as a preferable antigen-antibody communication network, which shows great potential for protein recognition and separation. In summary, our proposed strategy provides a systematic selection criterion of biomaterials for effective application in biosensors.

Plasticizing Silk Protein for On-Skin Stretchable Electrodes.

Soft and stretchable electronic devices are important in wearable and implantable applications because of the high skin conformability. Due to the natural biocompatibility and biodegradability, silk protein is one of the ideal platforms for wearable electronic devices. However, the realization of skin-conformable electronic devices based on silk has been limited by the mechanical mismatch with skin, and the difficulty in integrating stretchable electronics. Here, silk protein is used as the substrate for soft and stretchable on-skin electronics. The original high Young's modulus (5-12 GPa) and low stretchability (<20%) are tuned into 0.1-2 MPa and > 400%, respectively. This plasticization is realized by the addition of CaCl2 and ambient hydration, whose mechanism is further investigated by molecular dynamics simulations. Moreover, highly stretchable (>100%) electrodes are obtained by the thin-film metallization and the formation of wrinkled structures after ambient hydration. Finally, the plasticized silk electrodes, with the high electrical performance and skin conformability, achieve on-skin electrophysiological recording comparable to that by commercial gel electrodes. The proposed skin-conformable electronics based on biomaterials will pave the way for the harmonized integration of electronics into human.

3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicardium.

Means for high-density multiparametric physiological mapping and stimulation are critically important in both basic and clinical cardiology. Current conformal electronic systems are essentially 2D sheets, which cannot cover the full epicardial surface or maintain reliable contact for chronic use without sutures or adhesives. Here we create 3D elastic membranes shaped precisely to match the epicardium of the heart via the use of 3D printing, as a platform for deformable arrays of multifunctional sensors, electronic and optoelectronic components. Such integumentary devices completely envelop the heart, in a form-fitting manner, and possess inherent elasticity, providing a mechanically stable biotic/abiotic interface during normal cardiac cycles. Component examples range from actuators for electrical, thermal and optical stimulation, to sensors for pH, temperature and mechanical strain. The semiconductor materials include silicon, gallium arsenide and gallium nitride, co-integrated with metals, metal oxides and polymers, to provide these and other operational capabilities. Ex vivo physiological experiments demonstrate various functions and methodological possibilities for cardiac research and therapy.

Multifunctional skin-like electronics for quantitative, clinical monitoring of cutaneous wound healing.

Non-invasive, biomedical devices have the potential to provide important, quantitative data for the assessment of skin diseases and wound healing. Traditional methods either rely on qualitative visual and tactile judgments of a professional and/or data obtained using instrumentation with forms that do not readily allow intimate integration with sensitive skin near a wound site. Here, an electronic sensor platform that can softly and reversibly laminate perilesionally at wounds to provide highly accurate, quantitative data of relevance to the management of surgical wound healing is reported. Clinical studies on patients using thermal sensors and actuators in fractal layouts provide precise time-dependent mapping of temperature and thermal conductivity of the skin near the wounds. Analytical and simulation results establish the fundamentals of the sensing modalities, the mechanics of the system, and strategies for optimized design. The use of this type of "epidermal" electronics system in a realistic clinical setting with human subjects establishes a set of practical procedures in disinfection, reuse, and protocols for quantitative measurement. The results have the potential to address important unmet needs in chronic wound management.