Impact of Smoking on Salivary Lipid Profile and Oxidative Stress in Young Adults: A Comparative Analysis between Traditional Cigarettes, E-Cigarettes, and Heat-Not-Burn Products.

BACKGROUND Smoking nicotine is considered to be one of the most harmful addictions, leading to the development of a number of health complications, including many pathologies in the oral cavity. The aim of this study was to examine the effect of smoking traditional cigarettes, e-cigarettes, and heat-not-burn products on profiles of salivary lipids and lipid peroxidation products in the unstimulated and stimulated saliva of healthy young adults with a smoking habit of up to 3 years. MATERIAL AND METHODS We enrolled 3 groups of 25 smoking patients each and a control group matched for age, gender, and oral status. In saliva collected from patients from the study groups and participants from the control group, the concentrations of sphingolipids: sphingosine, sphinganine, sphingosine-1-phosphate, ceramides, and salivary lipid peroxidation products - malondialdehyde (MDA) and 4-hydroxynonenal (HNE) - were measured. The normality of distribution was assessed using the Shapiro-Wilk test. For comparison of the results, one-way analysis of variance (ANOVA) followed by post hoc Tukey test was used. RESULTS We demonstrated that each type of smoking causes a decrease in the concentration of salivary lipids, and there was an increased concentration of salivary MDA and 4-HNE. CONCLUSIONS Smoking in the initial period of addiction leads to an increase in the concentration of lipid peroxidation products through increased oxidative stress, leading to disturbance of the lipid balance of the oral cavity (eg, due to damage to cell membranes).

Long-Term Chromatic Durability of White Spot Lesions through Employment of Infiltration Resin Treatment.

Background and Objectives: White spot lesions (WSLs) denote regions of subsurface demineralization on the enamel that manifest as opaque and milky-white regions. Treatment for WSLs is essential for both clinical and aesthetic reasons. Resin infiltration has been identified as the most efficacious solution for alleviating WSLs, but studies with long-term monitoring are scarce. The aim of this clinical study is to assess the color change stability of the lesion after four years of implementing the resin infiltration technique. Materials and Methods: Forty non-cavity and unrestored white spot lesions (WSLs) were treated with the resin infiltration technique. The color of the WSLs and adjacent healthy enamel (SAE) was assessed using a spectrophotometer at T0 (baseline), T1 (after treatment), T2 (1 year after) and T3 (4 years after). The Wilcoxon test was utilized to determine the significance of the variation of color (ΔE) between WSLs and SAE over the observed time periods. Results: When comparing the color difference ΔE (WSLs-SAE) at T0-T1, the Wilcoxon test demonstarated a statistically significant difference (p < 0.05). For ΔE (WSLs-SAE) at T1-T2 and T1-T3, the color variation was not statistically significant (p = 0.305 and p = 0.337). Conclusions: The study's findings indicate that the resin infiltration technique is an effective solution for resolving the appearance of WSLs, and the results have demonstrated stability for a minimum of four years.

The ability of marginal detection using different intraoral scanning systems: A pilot randomized controlled trial.

PURPOSE: To assess the clinical ability of marginal detection of different intraoral optical scanning (IOS) systems. METHODS: The Ethics Committee of the University of Siena, Italy approved the research project. Thirty patients in need of an onlay/inlay with supra-gingival margins were included and randomly divided in three groups of 10 (3× n=10) according to the IOS for chairside capturing:(A) GC-Europe (Aadva); (B) True-Definition-TD; (C) Trios. A total of 1 scans from each IOS test group (A-C), were obtained clinically and stored as STL-files. In addition, corresponding conventional impressions were taken for all 30 patients, poured with stone, and then processed by a laboratory scanner (Aadva), serving as controls. All 60 STL-files were imported to the Exocad platform for analysis. The horizontal distance between each preparation margin and the adjacent tooth was measured using the ruler tool in the software. The distance at which the detection of the margin started to become visibly unclear was recorded for the horizontal distances. Data was processed statistically by one-way ANOVA (P> 0.05). RESULTS: No statistically significant inter-test group differences could be identified (IOS A-C). The minimum distance from which a clear margin was visible, was 4.5 (SD 0.1) mm for all images, regardless of which IOS was used. Under these experimental clinical conditions, all tested IOS performed similarly. In contrast, all margins of the controls were clearly visible. CLINICAL SIGNIFICANCE: None of the tested intraoral scanning systems in this study were capable of recording a clear impression when the cervical margin for a posterior partial crown was located at a distance of less than 0.5 mm from the interproximal neighbor.

Does Low-Taper Root Canal Shaping Decrease the Risk of Root Fracture? A Systematic Review.

Minimal root-canal preparation has been suggested to reduce the risk of root fracture, but as a result, satisfactory cleaning and shaping do not take place. Large-scale taper instrumentation can contribute to removing infected tissue; however, it may weaken the tooth structure. The aim of this systematic review is to evaluate whether root-canal shaping with low-taper instruments decreases the risk of root fracture, compared to high-conicity shaping. A search was performed on Ovid MEDLINE, PubMed, and the Web of Science. The inclusion criteria were: studies comparing the root fracture resistance of endodontically treated teeth, shaped with low- and high-conicity taper instruments, in human trials, and via in vitro study. The review includes all types of endodontically treated teeth, with various instrument tapers. The scientific search engines produced 328 results. Only 20 of the results were evaluated after screening. Based on the articles analyzed, it is not clear whether a taper difference can determine differences in root fracture resistance. No randomized controlled trial (RCTs) with long follow-ups have been published to date. It must also be taken into account that the in vitro studies do not consider the numerous differences that there are between in vitro and clinical evaluation. The review was registered on the PROSPERO website, with the protocol number CRD42020151451.

A new software architecture proposal for an evidence-based Decision Support System in dentistry.

BACKGROUND: in dentistry, clinical problems could be resolved using many therapeutic approaches that may results in very different therapies. In order to choose the best option, a good evaluation of therapy long-term survival and success rate is mandatory. The routine use of a decision support analysis software is nowadays limited due to the lack of software's flexibility especially when a variety of possible therapeutic option are present. The aim of this research was to develop a new algorithm model for a Decision Support System software to give diagnosis support in dentistry. METHODS: Beta tests were designed to study the computer software in different clinical situations based on clinical data. The therapeutic options can be conservative/endodontic or extractive/prosthetic therapies. In two of clinical situation selected could be possible to choose both therapies. RESULTS: in clinical situations tested, the DDS software correctly identified the several therapeutic options. When multiple treatments were possible the beta test showed an output mask that correctly showed a range of options with their corresponding survival and success rate. CONCLUSIONS: The software architecture proposed by the authors is technically feasible, can support the clinician choices based on scientific evidence and up-to-date references and gain informed consent based on data easily understandable for the patient.

Lithium Disilicate Ceramic Endocrown Biomechanical Response According to Different Pulp Chamber Extension Angles and Filling Materials.

The purpose of this study is to evaluate the effect of pulp chamber extension angles and filling material mechanical properties on the biomechanical response of a ceramic endocrown. A 3D model of maxillary molar that underwent endodontically treatment was exported to computer aided design software to conduct finite element analysis (FEA). The endocrown model was modified considering different pulp chamber extension angles (right angle; 6°, 12° and 18° of axial divergence). The solids were imported into the computer aided engineering software in Standard for the Exchange of Product Data (STEP) format. Nine different filling materials were simulated to seal the orifice of the root canal system under each endocrown restoration (resin composite, bulk-fill resin composite, alkasite, flowable resin composite, glass ionomer cement, autocured resin-reinforced glass ionomer cement, resin cement, bulk-fill flowable resin composite, zinc oxide cement), totaling 36 models. An axial load (300 N) was applied at the occlusal surface. Results were determined by colorimetric graphs of von-Misses stress (VMS) and Maximum Principal Stress (MPS) on tooth, cement layer, and endocrown restorations. VMS distribution showed a similar pattern between the models, with more stress at the load region for the right-angled endocrowns. The MPS showed that the endocrown intaglio surface and cement layer showed different mechanical responses with different filing materials and pulp chamber angles. The stress peaks plotted in the dispersion plot showed that the filling material stiffness is proportional to the stress magnitude in the endocrown, cement layer and tooth adhesive surface. In addition, the higher the pulp chamber preparation angle, the higher the stress peak in the restoration and tooth, and the lower the stress in the cement layer. Therefore, 6° and 12° pulp chamber angles showed more promising balance between the stresses of the adhesive interface structures. Under the conditions of this study, rigid filling materials were avoided to seal the orifice of root canal system when an endocrown restoration was planned as rehabilitation. In addition, the pulp chamber axial walls were prepared between 6° and 12° of divergence to balance the stress magnitude in the adhesive interface for this treatment modality.

Arthrocentesis and Sodium Hyaluronate Infiltration in Temporomandibular Disorders Treatment. Clinical and MRI Evaluation.

Arthrocentesis in temporomandibular joint disorders can be associated with the intra-articular infiltration of various drugs with the objective of increase treatment efficacy. The aim of this study was to evaluate the clinical indexes variation in patients affected by temporomandibular joint disorders treated with arthrocentesis and sodium hyaluronate (SH) injections. A total of 28 patients suffering from temporomandibular joint disorders underwent one cycle of five arthrocentesis and infiltrations of sodium hyaluronate. Spontaneous mouth opening improved from 36.3 ± 7.5 mm to 45.1 ± 1.9 mm at six months follow-up. A significant reduction in the pain at rest and during mastication mean values emerged at follow-up (p < 0.0001). The mean masticatory efficiency, evaluated through a visual analogic scale, showed improvement at the follow-up period, highlighted by the increase of mean value from a baseline of 3.1 ± 1.2 to a mean value of 8.5 ± 1.2 (p < 0.0001). The mean severity of the joint damage at baseline time was 2.4 ± 0.9 and decreased to 0.4 ± 0.3 at the end of the follow-up period. The decrease in values is confirmed by statistical test (p < 0.05). Our data show how arthrocentesis integrated with sodium hyaluronate infiltrations performed under local anesthesia is a valid method of treating temporomandibular joint disorders.

Spectrophotometric Evaluation of Enamel Color Variation Using Infiltration Resin Treatment of White Spot Lesions at One Year Follow-Up.

The aim of this study is to evaluate the color changes and the stability at a 1-year follow-up of white spot lesions (WSLs) treated with an infiltrating technique by using etching and TEGDMA resin. The color of 22 white spot lesions and the sound adjacent enamel (SAE) were assessed with a spectrophotometer at T0 (baseline), T1 (after treatment), and T2 (1 year after). The color change ΔE (WSLs-SAE) at T0 vs. T1 were compared to evaluate the camouflage effect efficiency, and at T1 vs. T2 to assess the stability of outcomes. To evaluate the effect on the treatment outcome of gender, the presence or not of previous orthodontic treatment, WSLs onset more/less than 10 years, the age of the patient, and the ΔE WSL (T0 vs. T1) was analyzed. The difference between ΔE (WSLs-SAE) at T0 and T1 resulted in statistical significance (p < 0.01). No statistical difference was found between ΔE (WSLs-SAE) at T1 vs. T2. The variables considered showed no statistical differences in treatment outcomes. The results of our investigation show that the technique used is immediately effective and the camouflage effect keeps up and steady one year after treatment. Such results do not appear to be influenced by analyzed clinical variables.

Changes in inflammatory mediators in peri-implant fluid after implant insertion.

BACKGROUND: Endosseous dental titanium implants have revolutionized restorative dentistry and have made a significant impact on improved patient care. The aim of this study was to compare and evaluate the influence of the placement technique on periodontal health. METHODS: A baseline examination was performed in patients with submerged and non-submerged titanium implants, including an evaluation of plaque index (PI), gingival index (GI), periodontal probing depth (PD), clinical attachment level (CAL), and bone level, as well as histamine and arachidonic acid metabolite concentrations, in the peri-implant crevicular fluid. Examinations were repeated after 12, 24, and 36 months. RESULTS: Bone loss was significantly higher in the submerged group relative to the non-submerged group at 3 years (P <0.01), with a slight increase at 24 months. All clinical parameters were significantly higher in the submerged group relative to the non-submerged group at 24 and 36 months (P <0.05 for PI; P <0.01 for GI, PD, and CAL). The mean levels of histamine and other inflammatory mediators were significantly higher, whereas 15(S)-hydroxy-5,8,11,13-eicosatetraenoic acid concentrations were significantly reduced in the submerged group, with a high correlation with periodontal indices at 24 and 36 months (P <0.001). CONCLUSION: This longitudinal study suggested that submerged implants present a number of risks for periodontal complications compared to non-submerged implants, which can be evidenced by inflammatory mediator variations in the peri-implant crevicular fluid.

Correlation of s-IgA and IL-6 Salivary with Caries Disease and Oral Hygiene Parameters in Children.

This study evaluates salivary immunoglobulin A (s-IgA) and interleukin 6 (IL-6) in saliva of children and its correlation to tooth decay severity. Fifty-nine patients were divided into two groups: caries free (A group) and caries active (B group). B group was investigated according to Mount and Monse indices. Mean salivary IgA rate between two groups (A 16.7 ± 4.5 mg/dL vs. B 21.8 ± 12.9 mg/dL) was not significant, while IL-6 rate (A 19.02 ± 5.3 pg/mL vs. B 30.2 ± 11.8 pg/mL) was statistically different. This study revealed that salivary IL-6 levels were significantly higher in children with active caries when compared with the caries-free group, while the s-IgA rate showed no significant differences between the two groups.

Evaluation of Mechanical Properties of a Hollow Endodontic Post by Three Point Test and SEM Analysis: A Pilot Study.

The aim of this study was to investigate the mechanical properties of a fiber hollow endodontic post characterized by the presence of an empty central cylindrical channel extended along the whole length. This particular shape allows clinicians to use the post also as a cementation resin carrier. Ten hollow posts were divided in two groups: the control group (unfilled hollow posts) (Group 0) and hollow posts filled with dual resin cement (Group 1). The samples of both groups were subjected to mechanical and micromorphological analysis by performing a three-point test and SEM observations. In the three-point test, the Group 1 samples exhibited a fracture load of 57.09 ± 5.06 N, a flexural strength of 1323.53 ± 110.09 MPa, and a Young's modulus of 42.87 ± 0.86 GPa. The samples of Group 2 exhibited a fracture load of 38.17 ± 1.7 N, a flexural strength of 908.87 ± 30.98 MPa, and a Young's modulus of 40.33 ± 1.9 GPa. The difference between fracture load, flexural strength, and deflection between the two groups was statistically highly significant (p < 0.01). Further, the difference between the Young's modulus of the two groups was statistically significant (p < 0.05). The values obtained are similar to those of other posts available on the market.

The IG- file use to Gauge the Apical Diameter in Endodontics: An In Vitro Study.

AIM: The aim of this study was to evaluate the efficacy of the IG-file, a new instrument designed for apical diameter gauging. MATERIALS AND METHODS: After shaping with F1 Universal Protaper, 60 roots were randomly divided into two groups and assigned to two operators, One Expert in Endodontics (EO) and One Unexpert (UO).In each sample, after canal curvatures have been detected, the apical diameters were measured with the IG-file and the K-NiTi. The results were compared with the reference value obtained by retrograde apical gauging. The data were statistically analyzed. RESULTS: Among 60 samples, 10% of errors were recorded when the IG-files were used; in the K-NiTi group the incorrect measurements were 70%.In both groups (expert and unexpert) the IG-file measurements were more accurate than the K-NiTi (90 vs 33 and 90 vs 26,7). The differences were statistically significant.In curved canals, the difference between measurement rates performed with both instruments was statistically significant (85,7% IG-file vs 28,6% K-NiTi) as well as for the samples without curvatures (92,3% IG file vs 30,8% NiTi file).In root canals without curvatures overestimation errors in K-NiTi file group are more frequent than underestimation errors. This difference was statistically significant. CONCLUSION: A proper gauging of the apical diameter has a key role in endodontic therapy; an incorrect measurement can lead to clinical failures. This "in vitro" study highlights that IG-file improves measurement accuracy independently from clinician experience. Furthermore, in curved canals, the IG-file is more accurate than K-NiTi.

A New Approach for the Treatment of Lateral Periodontal Cysts with an 810-nm Diode Laser.

The aim of this study was to test whether the combination of diode laser therapy and surgical treatment for a lateral periodontal cyst (LPC) would result in greater clinical improvement compared with surgery alone. A total of 18 patients with LPCs were assessed for eligibility for this study. At baseline, each patient was randomly allocated to one of two regimens: diode laser plus surgery (test group) or traditional surgical treatment alone (control group). Healing parameters were assessed at 7 to 21 days to monitor short-term complications, and periodontal parameters were assessed at 3, 6, and 12 months to evaluate long-term healing. The test group demonstrated highly significant differences in both the short-term and long-term parameters compared with the control group. This study showed that diode laser treatment results in a shorter wound-healing period and could be considered valuable for the surgical treatment of LPCs.

Dental Implants Placed in Periodontally Infected Sites in Humans.

BACKGROUND: The purpose of the present study was to evaluate fresh socket implant outcome leaving granulomatous tissue into the bone defects. MATERIALS AND METHODS: Subjects requiring tooth extractions in periodontal infected sites were selected for this prospective study. Only patients with 4-wall defects and asymptomatic ones were included. The fresh sockets were randomly scheduled into two groups: In one group (Removal Group, RG) granulomatous tissue was removed and, in the other group (Left Group, LG) granulomatous tissue was left. Implants were positioned immediately after tooth extraction, and were loaded after 3 months in both groups. Intraoral digital radiographs were performed at temporary prosthesis placement; at 12, 24 and 36 months to evaluate marginal bone levels changes. Moreover, clinical parameters were acquired at the same time points. RESULTS: Sixty patients were included in this study. Three-hundred seventy-two implants were placed immediately after tooth extraction and, at 3-year follow-up, a survival rate of 98.66% was reported, 2 implants were lost in RG and 3 implants in LG. At 36-month follow-up, not statistically significant differences were found between RG and LG in marginal bone level changes and clinical parameters (p > 005). Moreover, not statistically significant differences were found in intragroup comparisons over time (p > 0.05). CONCLUSIONS: With the limits of this study it was concluded that granulomatous tissue left in infected fresh sockets doesn't injury dental implant outcome.

Immediate Implant Placement in Sockets with Asymptomatic Apical Periodontitis.

BACKGROUND: The purpose of the present study was to evaluate if the presence of granulation tissue in asymptomatic apical periodontitis compromised immediate implant placement. METHODS: Patients requiring extraction of one tooth (maxillary and mandibular incisive, canine or premolar) with asymptomatic apical periodontitis, were recruited for this prospective study. They were randomly scheduled into two groups: in first group (A) including 30 teeth, reactive soft tissue was debrided before implant placement, and in second group (B) including 30 teeth, reactive soft tissue was left in the apical lesion. Implants were positioned immediately after tooth extraction, and were loaded after 3 months in both groups. Cone beam computed tomography was performed before tooth extraction and at 1-year follow-up to evaluate the radiolucency around the root apex and the implant, bucco-lingual bone levels were also checked. RESULTS: Sixty patients were included in this study. Sixty implants were placed immediately after tooth extraction and, at 1-year follow-up, a survival rate of 100% was reported. After one year both groups showed absence of radiolucent zone at the apical region of implants. All fresh sockets presented a buccal-palatal bone reduction in both groups after one year, even if not statistically significant differences were found between baseline bone levels and within groups. CONCLUSIONS: Within the limitations of the present study, the immediate placement of implants into the extraction sockets with asymptomatic apical periodontitis, in presence of primary stability, did not lead to an increased rate of complications and rendered an equally favorable type of tissue integration.

Invasive Cervical Resorption: A Case Series with 3-Year Follow-Up.

Invasive cervical resorption (ICR) lesion is an aggressive form of tooth destruction that usually begins immediately below the epithelial attachment. It has been described as a purely inflammatory reaction that can be started by microorganism infection, or an aseptic resorptive process that can be secondarily infected. The potential etiologic and predisposing factors for ICR are orthodontic treatment, traumatic injuries, bleaching, periodontal therapy, and idiopathic factors. This case series with a 3-year follow-up shows that Class 2 ICR lesions have a good prognosis in 100% of cases. Class 3 ICR lesions should be considered at risk. However, in the authors' experience, the treatment of Class 3 ICR lesions is compatible with tooth maintenance.

The Effect of Different Cleaning Protocols on Post Space: A SEM Study.

Aim. Purpose of the present paper is to analyze the efficiency of different post-space irrigation protocols. Methods. 28 single rooted teeth were endodontically treated. After post-space preparation every sample was assigned to one of three experimental groups and to one control group. In each group different irrigation protocols were performed as follows: EDTA (Group A), 37% orthophosphoric acid (Group B), and EDTA + 37% orthophosphoric acid with ultrasounds activation (Group C). In the control group (Group D) the irrigate association was not activated by ultrasounds. Three zones (coronal, middle, and apical) of each sample were analyzed by using Scan Electron Microscopy (SEM) without any metallization procedures. The presence of smear layer on the canal surface was qualitatively evaluated by applying Serafino's score with values included between 0 and 2. Results. The results of the research showed how Group C recorded the better results (0.81 ± 0.72). Group A and Group B showed lower mean scores (1.06 ± 0.69 and 1.08 ± 0.77); Group D showed the lowest mean score of 1.30 ± 0.69. The SEM observation analysis demonstrated how the smear layer presence decreased in the crown-apical direction. Conclusions. The different post-space treatments statistically determine significant differences on the dentinal surfaces cleansing. The absence of ultrasonic activation lowers the cleansing efficacy of endocanalar irrigants, showing sensible differences among each post-space zone.

Dentin Morphology of Root Canal Surface: A Quantitative Evaluation Based on a Scanning Electronic Microscopy Study.

Dentin is a vital, hydrated composite tissue with structural components and properties that vary in the different topographic portions of the teeth. These variations have a significant implication for biomechanical teeth properties and for the adhesive systems utilized in conservative dentistry. The aim of this study is to analyse the root canal dentin going from coronal to apical zone to find the ratio between the intertubular dentin area and the surface occupied by dentin tubules varies. Observations were conducted on 30 healthy premolar teeth extracted for orthodontic reasons in patients aged between 10 and 14. A SEM analysis of the data obtained in different canal portions showed that, in the coronal zone, dentinal tubules had a greater diameter (4.32 µm) than the middle zone (3.74 µm) and the apical zone (1.73 µm). The average number of dentinal tubules (in an area of 1 mm(2)) was similar in coronal zone (46,798 ± 10,644) and apical zone (45,192 ± 10,888), while in the middle zone they were lower in number (30,940 ± 7,651). However, intertubular dentin area was bigger going from apical to coronal portion. The differences between the analysed areas must be considered for the choice of the adhesive system.

Periodontal health and caries prevalence evaluation in patients affected by Parkinson's disease.

Parkinson's disease (PD) is a progressive neurodegenerative disorder related to the loss or absence of dopaminergic neurons in the brain. These deficits result in slowness of movement, tremor, rigidity, and dysfunction of behaviour. These symptoms negatively influence the patient's capability to carry out the daily oral hygiene manoeuvres. The aim of this work is to record the oral health condition of PD patients evaluated at the IRCSS Bonino-Puleio in Messina. The oral health of 45 consecutive PD patients (study group) with neurologic diagnosis based on United Kingdom Brain Bank Criteria has been compared with that of another 45 no PD patients of the same age (control group). The evaluation of the general oral condition was recorded underlining tooth loss, active periodontal disease, and presence of untreated caries. The frequency of untreated caries, periodontal diseases, and missing teeth of the study group was significantly higher than in control group. Based on the data results, clinicians should direct high attention to the oral hygiene of patients with PD, above all at the early stages of the caries or periodontal disease, in order to prevent serious evolution of those pathologic dental conditions that may finally result in the tooth extraction event.

Esthetic integration between ceramic veneers and composite restorations: a case report.

The tooth structure preservation is the best way to postpone more invasive therapies. Especially in young patients more conservative techniques should be applied. Bonded porcelain veneers and even more the direct composite restorations, are the two therapeutic procedures that require the fewer sacrifice of dental tissue, finalized to the optimal recovery of aesthetic and functional outcome.Although the two techniques require different methods and materials, is possible to achieve a correct integration of both the methods by some technical and procedural measures. In the presented case is planned a rehabilitation of the four upper incisors by ceramic veneers and direct composite restorations.Care is taken for the surface treatment of ceramic restorations, with the objective of achieving integration, not only between natural teeth and restorations, but also between the different materials in use.The purpose of this article is to show how a proper design of the treatment plan leads to obtain predictable results with both direct and indirect techniques.