Nanofiltration-Inspired Janus Membranes with Simultaneous Wetting and Fouling Resistance for Membrane Distillation.

Membranes with robust antiwetting and antifouling properties are highly desirable for membrane distillation (MD) of wastewater. Herein, we have proposed and demonstrated a highly effective method to mitigate wetting and fouling by designing nanofiltration (NF)-inspired Janus membranes for MD applications. The NF-inspired Janus membrane (referred to as PVDF-P-CQD) consists of a hydrophobic polyvinylidene fluoride (PVDF) membrane and a thin polydopamine/polyethylenimine (PDA/PEI) layer grafted by sodium-functionalized carbon quantum dots (Na+-CQDs) to improve its hydrophilicity. The vapor flux data have confirmed that the hydrophilic layer does not add extra resistance to water vapor transport. The PVDF-P-CQD membrane exhibits excellent resistance toward both surfactant-induced wetting and oil-induced fouling in direct contact MD (DCMD) experiments. The impressive performance arises from the fact that the nanoscale pore sizes of the PDA/PEI layer would reject surfactant molecules by size exclusion and lower the propensity of surfactant-induced wetting, while the high surface hydrophilicity resulted from Na+-CQDs would induce a robust hydration layer to prevent oil from attachment. Therefore, this study may provide useful insights and strategies to design novel membranes for next-generation MD desalination with minimal wetting and fouling propensity.

Can Composite Janus Membranes with an Ultrathin Dense Hydrophilic Layer Resist Wetting in Membrane Distillation?

Tackling membrane wetting is an ongoing challenge for large-scale applications of membrane distillation (MD). Herein, composite Janus MD membranes comprising an ultrathin dense hydrophilic layer are developed by layer-by-layer assembling cationic polyethyleneimine and anionic poly(sodium 4-styrenesulfonate) polyelectrolytes on a hydrophobic polyvinylidene fluoride substrate. Using surfactant-containing saline water as the feed with low surface tension, experiments reveal that the number of polyelectrolyte layers, rather than surface wettability or surface charge, determines the anti-wetting performance of the composite Janus membranes. More deposited layers yield higher wetting resistance. With the aid of positron annihilation spectroscopy, this study, for the first time, demonstrates the origin of the excellent wetting resistance of the composite Janus membranes. The effective pore size of the polyelectrolyte multilayer decreases with an increase in the number of the deposited layer. The membrane with an ultrathin hydrophilic multilayer of 48 nm has a sufficiently small pore size to sieve out surfactant molecules from the feed solution via a size exclusion mechanism, thus protecting the hydrophobic substrate from being wetted by the low-surface-tension feed water. This study may pave the way for developing next-generation anti-wetting Janus membranes for robust membrane distillation.

Advanced Anti-Fouling Membranes for Osmotic Power Generation from Wastewater via Pressure Retarded Osmosis (PRO).

A facile and versatile approach was demonstrated for the fabrication of low-fouling pressure retarded osmosis (PRO) membranes for osmotic power generation from highly polluted wastewater. A water-soluble zwitterionic random copolymer with superior hydrophilicity and unique chemistry was molecularly designed and synthesized via a single-step free-radical polymerization between 2-methacryloyloxyethyl phosphorylcholine (MPC) and 2-aminoethyl methacrylate hydrochloride (AEMA). The P[MPC- co-AEMA] copolymer was then chemically grafted onto the surface of PES/Torlon hollow fibers via amino groups coupling of poly(AEMA) with the polyimide structures of Torlon, leaving the zwitterions of poly(MPC) in the feed solution. Because of the outstanding hydrophilicity, unique cationic and anionic groups, and electrical neutrality of the zwitterionic brush, the newly developed membrane showed great resistances to both inorganic scaling and organic fouling in PRO operations. When using a real wastewater brine comprising multifoulants as the feed, the P[MPC- co-AEMA] modified membrane exhibits a much lower flux decline of 37% at Δ P = 0 bar after 24-h tests and a smaller power density decrease of 28% at Δ P = 15 bar within 12-h tests, compared to 61% and 42% respectively for the unmodified one. In addition to the low fouling tendency, the modified membrane shows outstanding performance stability and fouling reversibility, where the flux is almost fully recovered by physical backwash of water at 15 bar for 0.5 h. This study provides valuable insights and strategies for the design and fabrication of effective antifouling materials and membranes for PRO osmotic power generation.

Omniphobic Hollow-Fiber Membranes for Vacuum Membrane Distillation.

Management of produced water from shale gas production is a global challenge. Vacuum membrane distillation (VMD) is considered a promising solution because of its various advantages. However, low-surface-tension species in produced water can easily deposit on the membrane surface and cause severe fouling or wetting problems. To solve the problems, an omniphobic polyvinylidene difluoride (PVDF) hollow-fiber membrane has been developed via silica nanoparticle deposition followed by a Teflon AF 2400 coating in this study. The resultant membrane shows good repellency toward various liquids with different surface tensions and chemistries, including water, ethylene glycol (EG), cooking oil, and ethanol. It also exhibits stable performance in 7 h VMD tests with a feed solution containing up to 0.6 mM of sodium dodecyl sulfate (SDS). In addition, the effects of surface energy and surface morphology as well as nanoparticle size on membrane omniphobicity have been systematically investigated. This work may provide valuable guidance to molecularly design omniphobic VMD membranes for produced water treatment.

Design of omniphobic interfaces for membrane distillation - A review.

Membrane distillation (MD) has a great potential in treating high salinity industrial wastewater due to its unique characteristics. Nevertheless, the implementation of MD for industrial wastewater reclamation must be conducted with precaution because low-surface-tension contaminates in feed solutions may easily wet the membranes. In recent years, omniphobic membranes that exhibit strong repellence towards liquids with a wide range of surface tensions have been proposed as a promising solution to deal with the wetting problem. In this paper, we aim to provide a comprehensive review of omniphobic interfaces and illustrate their fundamental working principles, innovative design approaches and novel applications on membrane distillation. The review may provide insights in designing stable solid-liquid-vapor interfaces and serve as a guidance for the development of robust anti-wetting membranes for industrial wastewater reclamation via membrane distillation.