Multivariate analysis of alveolar bone dehiscence and fenestration in anterior teeth after orthodontic treatment: A retrospective study.

OBJECTIVE: To compare the prevalence of fenestration and dehiscence between pre- and post-orthodontic treatment and to explore the factors related to fenestration and dehiscence in the anterior teeth after treatment. METHODS: This study included 1000 cone-beam computed tomography (CBCT) scans of 500 patients before (T1) and after (T2) orthodontic treatment. These images were imported into Dolphin 11.9 software to detect alveolar fenestration and dehiscence in the anterior teeth area. The chi-square test and Fisher's exact test were performed to compare the prevalence of alveolar bone defects between time points T1 and T2. A total of 499 patients were selected for logistic regression analysis to examine the correlation among age, sex, crowding, sagittal facial type, extraction, miniscrew use and fenestration or dehiscence post-treatment. RESULTS: Except for the maxillary lingual fenestration and labial fenestration of mandibular canines, a significant change in the prevalence of fenestration and dehiscence was noted between time points T1 and T2 (P < .025). Multinomial logistic regression showed that age, miniscrew use and extraction highly influenced the prevalence of anterior lingual dehiscence (P < .05). Dehiscence of the mandibular labial side (skeletal Class III vs. I, OR = 2.368, P = .000) and fenestration of the mandibular lingual side (skeletal Class II vs. I, OR = 2.344, P = .044) were strongly correlated with the sagittal facial type. Dehiscence of the maxillary labial side (moderate vs. mild, OR = 1.468, P = .017) was significantly associated with crowding. CONCLUSIONS: Older age, maxillary moderate crowding, skeletal Class III, extraction and miniscrew potentially significantly affect the prevalence of anterior teeth dehiscence. Adult females, skeletal Class III patients on the mandibular labial side and skeletal Class II patients on the mandibular lingual side should be monitored for anterior teeth fenestration.

Long-term morphometric changes in the anterior alveolar bone in adolescents and adults after space closure: A retrospective study.

OBJECTIVES: To analyse the morphometric changes in the anterior alveolar bone of both the maxilla and mandible after space closure and retention for 18-36 mo in adults and adolescents. MATERIALS AND METHODS: Forty-two subjects with 4 first premolars extracted followed by retracting anterior teeth were included and divided into two age groups: adult group (4 males, 17 females, mean age: 23.67 ± 5.29 y, treatment duration: 27.95 mo, retention duration: 26.96 mo, ANB: 4.8 ± 2.1, U1-L1: 117.2 ± 9.2, U1-PP: 120.2 ± 7.2, L1-MP: 99.2 ± 5.3) and adolescent group (6 males, 15 females, mean age: 11.52 ± 1.21 y, treatment duration: 26.18 mo, retention duration: 25.79 mo, ANB: 5.2 ± 2.1, U1-L1: 116.0 ± 8.6, U1-PP: 119.8 ± 4.9, L1-MP: 99.7 ± 4.9). Alveolar bone height and thickness of anterior teeth in both groups were measured using cone beam computed tomography (CBCT) imaging performed at the pretreatment (T1), posttreatment (T2) and retention phases (T3). One-way repeated-measure ANOVAs were performed to evaluate the alveolar bone changes. Voxel-based superimpositions were performed to measure the amount of tooth movement. RESULTS: After orthodontic treatment, the lingual bone height and thickness of both arches and the labial bone height of the mandible decreased significantly in both age groups (P < .05). Most of the labial bone height and thickness of the maxilla in both groups remained unchanged (P > .05). After retention, the lingual bone height and thickness increased significantly in both age groups (P < .05). The amounts of increased height ranged from 1.08 to 1.64 mm in adults and from 0.78 to 1.21 mm in adolescents, and the amounts of increased thickness ranged from 0.23 mm to 0.62 mm in adults and from 0.16 mm to 0.36 mm in adolescents. Obvious movements of the anterior teeth during retention were not found (P > .05). CONCLUSIONS: Although lingual alveolar bone loss occurred in adolescents and adults during orthodontic treatment, continuous remodelling occurred in the later retention phase, which provides a reference for clinical treatment planning of bimaxillary dentoalveolar protrusion.

Comprehensive positional and morphological assessments of the temporomandibular joint in adolescents with skeletal Class III malocclusion: a retrospective CBCT study.

BACKGROUND: Condyle-fossa relationships in adolescents with skeletal Class III malocclusion remain unclear. Therefore, this study used cone-beam computed tomography (CBCT) to evaluate the position and morphology of the temporomandibular joint (TMJ) in adolescents with skeletal Class III malocclusion. METHODS: In this cross-sectional retrospective study, CBCT images from 90 adolescents with skeletal Class III malocclusion and 30 controls were analysed. Adolescents with skeletal Class III malocclusion were divided into different groups based on (1) sex (male and female), (2) sides (right and left), (3) age (early, middle, and late adolescence), and (4) vertical skeletal patterns (hyperdivergent, normodivergent, and hypodivergent). Morphology of the condyle and fossa as well as condylar position, was compared among groups. Data were collected and submitted for statistical analysis. This study adheres to STROBE guidelines. RESULTS: Regarding the intergroup comparisons, there were significant differences in TMJ position and morphology between the skeletal Class III malocclusion with different vertical skeletal patterns and control groups (P < 0.05). Within groups, condyle-fossa relationships differed significantly according to sex, age, and vertical skeletal patterns (P < 0.05); however, the mean values were not statistically different between left and right sides in adolescents with skeletal Class III malocclusion. CONCLUSIONS: Our findings can be used clinically and radiographically to evaluate the condyle and glenoid fossa features in adolescents with skeletal Class III malocclusion, providing a basis for better TMD diagnosis and orthodontic treatment.

Age-related variations in position and morphology of the temporomandibular joint in individuals with anterior openbite and crossbite: a multi-cross-sectional comparative study.

BACKGROUND: This study aimed to compare the age-related positional and morphological characteristics of the temporomandibular joint (TMJ) between individuals with anterior openbite or crossbite and controls. METHODS: This multi-cross-sectional comparative study analysed cone-beam computed tomography images of 750 participants, equally divided into the openbite, crossbite, and control groups (OBG, CBG, and CG, respectively). Each group was further divided into five subgroups (8-11 years, 12-15 years, 16-19 years, 20-24 years, and 25-30 years). Measurements of the TMJ included the position of the condyles in their respective fossae and morphology of the condyles and fossae. Data were submitted to statistical analysis. The study adhered to the STROBE Statement checklist for reporting of cross-sectional studies. RESULTS: Condyles were positioned more posteriorly with increasing age in all groups, and the condylar position was more posterior in the OBG than in the CBG. The articular eminence inclination increased with age in all the groups. There were significant differences in the articular eminence inclination among the three major groups at the age of > 15 years, and the condylar path was flatter in the CBG than in the OBG. CONCLUSIONS: Age-related morphological and positional characteristics of the TMJ differed considerably among OBG, CBG and CG. Contrary to CBG, OBG was found to have relatively posterior condylar position and steeper condylar path.

Polydopamine-coated liposomes as pH-sensitive anticancer drug carriers.

Stimuli-responsive drug carriers are considered to play important roles in chemotherapy. We fabricated pH-sensitive polydopamine-protected liposomes (liposome@PDA) drug delivery systems, which were characterised with microscope, scanning electron microscope (SEM), UV-vis spectrometer and Fourier transform infrared (FTIR) technieques. The typical chemotherapeutic agent, 5-fluorouracil (5-FU), was loaded into liposome@PDA capsules. The maximum release percentages of 5-FU are 3.2%, 29.5%, 52.7%, 76.7% in the solution with pH 7.42, 6.87, 4.11 and 3.16, respectively. The in vitro cell cytotoxity experiments were carried out using 5-FU-loaded capsules at pH 6.87 solution, which simulate the true pH around cancerous cells. At 1.5 µM concentration, the free 5-FU, 5-FU-loaded liposome capsules and 5-FU-loaded capsules showed the cell viability of 50.56%, 22.66% and 21.63%, respectively. It confirms that drug-loaded capsules performed better than free drug. The results demonstrate the great potential of liposome@PDA capsules as carriers in biomedical applications.

Modifying glass fiber surface with grafting acrylamide by UV-grafting copolymerization for preparation of glass fiber reinforced PVDF composite membrane.

Experimental design and response surface methodology (RSM) were used to optimize the modification of conditions for glass surface grafting with acrylamide (AM) monomer for preparation of a glass fiber reinforced poly(vinylidene fluoride) (PVDF) composite membrane (GFRP-CM). The factors considered for experimental design were the UV (ultraviolet)-irradiation time, the concentrations of the initiator and solvent, and the kinds and concentrations of the silane coupling agent. The optimum operating conditions determined were UV-irradiation time of 25 min, an initiator concentration of 0-0.25 wt.%, solvent of N-Dimethylacetamide (DMAC), and silane coupling agent KH570 with a concentration of 7 wt.%. The obtained optimal parameters were located in the valid region and the experimental confirmation tests conducted showed good accordance between predicted and experimental values. Under these optimal conditions, the water absorption of the grafted modified glass fiber was improved from 13.6% to 23%; the tensile strength was enhanced and the peeling strength of the glass fiber reinforced PVDF composite membrane was improved by 23.7% and 32.6% with an AM concentration at 1 wt.% and 2 wt.%. The surface composition and microstructure of AM grafted glass fiber were studied via several techniques including Field Emission Scanning Electron Microscopy (FESEM), Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) and energy dispersive X-ray spectroscopy (EDX). The analysis of the EDX and FTIR-ATR results confirmed that the AM was grafted to the glass fiber successfully by detecting and proving the existence of nitrogen atoms in the GFRP-CM.

Preparation and characterization of PVDF-glass fiber composite membrane reinforced by interfacial UV-grafting copolymerization.

A novel inorganic-organic composite membrane, namely poly(vinylidene fluoride) PVDF-glass fiber (PGF) composite membrane, was prepared and reinforced by interfacial ultraviolet (UV)-grafting copolymerization to improve the interfacial bonding strength between the membrane layer and the glass fiber. The interfacial polymerization between inorganic-organic interfaces is a chemical cross-linking reaction that depends on the functionalized glass fiber with silane coupling (KH570) as the initiator and the polymer solution with acrylamide monomer (AM) as the grafting block. The Fourier transform infrared spectrometer-attenuated total reflectance (FTIR-ATR) spectra and the energy dispersive X-ray (EDX) pictures of the interface between the glass fiber and polymer matrix confirmed that the AM was grafted to the surface of the glass fiber fabric and that the grafting polymer was successfully embedded in the membrane matrix. The formation mechanisms, permeation, and anti-fouling performance of the PGF composite membrane were measured with different amounts of AM in the doping solutions. The results showed that the grafting composite membrane improved the interfacial bonding strength and permeability, and the peeling strength was improved by 32.6% for PGF composite membranes with an AM concentration at 2wt.%.

Hyperbranched Polymers for Organic Semiconductors.

Hyperbranched polymers (HBPs) have attracted increasing attention owing to their distinct highly branched topological structures, resulting in unique properties and wide applications in organic semiconductors (OSCs). In this Review, recent progress in functional HBPs is outlined in the field of OSCs, including organic light-emitting diodes (OLEDs), organic photovoltaics (OPVs), dye-sensitized solar cells (DSSCs), and organic field effect transistors (OFETs), among others. Prospects of HBPs-based materials in OSCs are examined. The results revealed that multi-dimensional topologies not only regulate the electron (hole) transport but also adjust the film morphology, thereby affecting the efficiency and long life of organic electronic devices. Many studies showed the usefulness of HBPs as hole transport materials but reports dealing with n-type and ambipolar materials are still lacking. In addition, the interchain covalent bond in hyperbranched polymers could mitigate the damage caused by stretching, conducive to building stable flexible stretchable devices with long-term durability and good safety under harsh environmental conditions. Overall, the flexible stretchable design may enrich the applications of HBPs in organic semiconductors and provide new ideas for guiding the future design of functional organic semiconductor materials.

Transcriptome landscape comparison of periodontium in developmental and renewal stages.

Objectives: Periodontium regeneration remains a significant challenge in clinics and research, and it is essential to understand the stage-specific biological process in situ. However, differing findings have been reported, and the mechanism has yet to be elucidated. The periodontium of adult mice molars is considered to be stable remodeling tissue. At the same time, the continuously growing incisors and the developing dental follicle (DF) of postnatal mice highly represent fast remodeling tissue. In this study, we attempted to explore different clues of temporal and spatial comparisons to provide improved references for periodontal regeneration. Methods: Periodontal tissues from the developing periodontium (DeP) of postnatal mice, and continuously growing periodontium (CgP) and stable remodeling periodontium (ReP) of adult mice were isolated and compared using RNA sequencing. Based on the Dep and CgP separately compared with the ReP, differentially expressed genes and signaling pathways were analyzed using GO, KEGG databases, and Ingenuity Pathway Analysis (IPA). The results and validation were obtained by immunofluorescence staining and RT-PCR assays. Data were expressed as means ± standard deviation (SD) and analyzed by GraphPad Prism 8 software package, and one-way ANOVA was used to test multiple groups. Results: Principal component analysis showed that the three groups of periodontal tissue were successfully isolated and had distinct expression profiles. A total of 792 and 612 DEGs were identified in the DeP and CgP groups compared with the ReP. Upregulated DEGs in the DeP were closely related to developmental processes, while the CgP showed significantly enhanced cellular energy metabolism. The DeP and CgP showed a common downregulation of the immune response, with activation, migration, and recruitment of immune cells. IPA and further validation jointly suggested that the MyD88/p38 MAPK pathway played an essential regulatory role in periodontium remodeling. Conclusion: Tissue development, energy metabolism, and immune response were critical regulatory processes during periodontal remodeling. Developmental and adult stages of periodontal remodeling showed different expression patterns. These results contribute to a deeper understanding of periodontal development and remodeling and may provide references for periodontal regeneration.

Wnt3a-Loaded Hydroxyapatite Nanowire@Mesoporous Silica Core-Shell Nanocomposite Promotes the Regeneration of Dentin-Pulp Complex via Angiogenesis, Oxidative Stress Resistance, and Odontogenic Induction of Stem Cells.

Pulp exposure often leads to pulp necrosis, root fractures, and ultimate tooth loss. The repair of the exposure site with pulp capping treatment is of great significance to preserving pulp vitality, but its efficacy is impaired by the low bioactivity of capping materials and cell injuries from the local accumulation of oxidative stress. This study develops a Wnt3a-loaded hydroxyapatite nanowire@mesoporous silica (Wnt3a-HANW@MpSi) core-shell nanocomposite for pulp capping treatments. The ultralong and highly flexible hydroxyapatite nanowires provide the framework for the composites, and the mesoporous silica shell endows the composite with the capacity of efficiently loading/releasing Wnt3a and Si ions. Under in vitro investigation, Wnt3a-HANW@MpSi not only promotes the oxidative stress resistance of dental pulp stem cells (DPSCs), enhances their migration and odontogenic differentiation, but also exhibits superior properties of angiogenesis in vitro. Revealed by the transcriptome analysis, the underlying mechanisms of odontogenic enhancement by Wnt3a-HANW@MpSi are closely related to multiple biological processes and signaling pathways toward pulp/dentin regeneration. Furthermore, an animal model of subcutaneous transplantation demonstrates the significant reinforcement of the formation of dentin-pulp complex-like tissues and blood vessels by Wnt3a-HANW@MpSi in vivo. These results indicate the promising potential of Wnt3a-HANW@MpSi in treatments of dental pulp exposure.

CFD simulation and optimization of membrane scouring and nitrogen removal for an airlift external circulation membrane bioreactor.

Cost-effective membrane fouling control and nitrogen removal performance are of great concern in airlift external circulation membrane bioreactors (AEC-MBRs). Computational fluid dynamics (CFD) model incorporating sub-models of bio-kinetics, oxygen transfer and sludge rheology was developed for the cost-effective optimization of a lab-scale AEC-MBR. The model was calibrated and validated by extensive measurements of water velocities and water quality parameters in the AEC-MBR. The validated results demonstrated that the optimized height of gas-liquid dispersion was at around 300mm. The shear stress on membrane surface was equalized and had an average value of 1.2Pa under an air flowrate of 1.0m(3)h(-1). The model further revealed that the high nitrogen removal efficiency (>90%) was achieved due to the high recirculation ratio driven by airlift force without destroying the oxygen deprivation and enrichment in the anoxic and oxic zone, respectively.

Direct visualization of solution morphology of cellulose in ionic liquids by conventional TEM at room temperature.

Taking advantage of the negligible vapor pressure and dissolving features of ionic liquids (ILs), the solution morphology and dissolution process of cellulose in ILs have been visualized directly by conventional transmission electron microscopy (TEM) at room temperature for the first time.