Simply and Cheaply Prepared Liposomal Membrane for Nanocarriers: High Encapsulation Efficiency Based on Broad Regulation of Surface Charges and pH-Switchable Performance.

The zeta potential of nanoparticles impacts their distribution and metabolism in the body as well as their interaction with medications of varying charges, hence altering therapeutic efficacy and safety. In this paper, the external charges of liposomes were regulated by utilizing a simple and economical method based on competition for protons of cationic chitosan (CS) and anion hyaluronic acid (HA). The charge regulation of a liposomal membrane is generally accomplished by adjusting the ratio of charged lipids within a liposome (e.g., cationic DOTAP or anionic DOPS), the stability of which was maintained by the coating materials of cationic chitosan (CS) or anion hyaluronic acid (HA). A series of nanoparticles could respond to pH-stimulation with adjustable surface charge. Moreover, the sizes of liposomes coated with CS and HA remain within a narrow range. In vitro cytotoxicity tests revealed that the nanocarriers were safe, and the nanoparticles containing antitumor medicines were efficient in tumor therapy. Considering liposomes with different external surface charges could be aimed at diverse therapy purposes. The strategies for regulating liposomal surface charges with high encapsulation rates and certain release cycles reported here could provide a versatile platform as carriers for the delivery of drugs and other macromolecules into human bodies.

Efficacy of mandibular molar distalization by clear aligner treatment. / æ— æ‰˜æ§½éšå½¢çŸ«æ²»å™¨è¿œç§»ä¸‹é¢Œç£¨ç‰™çš„ç–—æ•ˆ.

OBJECTIVES: At present, the research on clear aligner of molar distalization mainly focuses on the upper jaw, while the research on mandibular molars is few.This study aims to evaluate the therapeutic effect of mandibular molars distalization with clear aligner via cone beam CT (CBCT) and Dolphin software. METHODS: Twenty cases of mandibular molars with clear aligner were included according to the inclusion and exclusion criteria. CBCT was taken before treatment (T0) and when the first molar was moved in place (T1). Dolphin software was used to measure the effectiveness of molar distalization. Three-dimensional changes in direction and the impact on the incisors and facial soft and hard tissues were evaluated. RESULTS: The effective rates of crown and root distalization of the second and first mandibular molars were 74%, 49%, and 71%, 47%, respectively. The second and first molars were both the distal buccal cusp with the largest distalization [(2.15 ± 0.91) mm and (1.85±1.09) mm], respectively, with significant difference between the T0 and T1 (P<0.05). The second and first molars were accompanied by depression, distal tilt, and buccal tilt with 1.06 mm, 2.10°, 2.27°, and 0.91 mm, 1.62°, and 1.91°, respectively, with significant differences between the T0 and T1 (all P<0.05). There was no obvious difference between men and women. The mandibular central incisor showed a lip-side movement of 1.02 mm, a depression of 0.82 mm, a mesial incline of 0.66°, and a crown-lip torque of 1.51° after molar distalization, with significant differences between the T0 and T1 (all P<0.001). Only the lower lip thickness increased by 0.1 cm, the length of the lower lip increased by 0.1 cm, and the ANS-ME (distance from anterior nasal spine to submental point) decreased by 0.13 cm, with significant differences between the T0 and T1 (all P<0.05). CONCLUSIONS: Clear aligner can effectively move mandibular molars farther, the crown is more effective than the root, and it is tilted. The second mandibular molar is more effective than the first mandibular molar in its distant displacement and three-dimensional changes. Molar distalization causes minor changes in mandibular incisors and facial soft and hard tissues.

Compound heterozygous mutations in the ALDH3A2 gene cause Sjögren-Larsson syndrome: a case report.

Purpose: Sjögren-Larsson syndrome is a rare, autosomal, recessive neurocutaneous disorder caused by mutations in the ALDH3A2 gene, which encodes the fatty aldehyde dehydrogenase enzyme. Deficiency in fatty aldehyde dehydrogenase results in an abnormal accumulation of toxic fatty aldehydes in the brain and skin, which cause spasticity, intellectual disability, ichthyosis, and other clinical manifestations. We present the clinical features and mutation analyses of a case of SLS.Materials and Methods: The family history and clinical data of the patient were collected. Genomic DNA was extracted from peripheral blood samples of the patient and her parents, and next-generation sequencing was performed. The candidate mutation sites that required further validation were then sequenced by Sanger sequencing. Bioinformatics software PSIPRED and RaptorX were used to predict the secondary and tertiary structures of proteins.Results: The patient, a five-year-old girl with complaints of cough for three days and intermittent convulsions for seven hours, was admitted to the hospital. Other clinical manifestations included spastic paraplegia, mental retardation, tooth defects, and ichthyosis. Brain magnetic resonance imaging showed periventricular leukomalacia. Genetic screening revealed compound heterozygous mutations in the ALDH3A2 gene: a frameshift mutation c.779delA (p.K260Rfs*6) and a missense mutation c.1157A > G (p.N386S). Neither of the ALDH3A2 alleles in the compound heterozygote patient were able to generate normal fatty aldehyde dehydrogenase, which were likely responsible for her phenotype of Sjögren-Larsson syndrome.Conclusion: The compound heterozygous mutations found in the ALDH3A2 gene support the diagnosis of Sjögren-Larsson syndrome in the patient and expand the genotype spectrum of the gene.

Bioinspired Polydopamine/Polyzwitterion Coatings for Underwater Anti-Oil and -Freezing Surfaces.

Zwitterionic polymers are continually suggested as promising alternatives to tune the surface/interface properties of materials in many fields because of their unique molecular structures. Tremendous efforts have been devoted to immobilizing zwitterionic polymers (polyzwitterions, PZIs) on the material surfaces. However, these efforts usually suffer from cumbersome and time-consuming procedures. Herein we report a one-step strategy to facilely achieve the bioinspired polydopamine/polyzwitterion (PDA/PZI) coatings on various substrates. It requires only 30 min to form PDA/PZI coatings by mixing oxidant, dopamine, and zwitterionic monomers, including carboxybetaine methacrylate (CBMA), sulfobetaine methacrylate (SBMA), and 2-methacryloxyethyl phosphorylcholine (MPC). These bioinspired coatings display multifunctional properties such as underwater antioil-adhesion and antifreezing thanks to their high hydrophilicity and underwater superoleophobicity. The coatings even show the antiadhesion property for crude oil with high viscosity. Therefore, the PDA/PZI-coated meshes are efficient for separating both light oil and crude oil from oil/water mixtures. All these results demonstrate that the one-step strategy is a facile approach to design and exploit the bioinspired PDA/PZI coatings for diverse applications.

Widely Applicable AIE Chemosensor for On-Site Fast Detection of Drugs Based on the POSS-Core Dendrimer with the Controlled Self-Assembly Mechanism.

A novel fluorescence chemosensor that can quickly on-site detect synthetic drugs and undergo prescreening is first reported. An eight tetraphenylethene (TPE)-modified polyhedral oligomeric silsesquioxane (POSS) dendrimer is designed and synthesized as an aggregation-induced emission (AIE) chemosensor, which exhibits great enhancement of unique monomer emission in pure tetrahydrofuran (THF) and AIE emission in THF/water, thanks to forming different self-assembly morphologies. In addition, POSS-TPE can sensitively detect methamphetamine and ketamine even in artificial saliva by noncovalent interaction forces. It has great potential to be a new widely applicable AIE chemosensor for aromatic molecules.

The Clinical Performance of Narrow Diameter Implants Versus Regular Diameter Implants: A Meta-Analysis.

The purpose of this study is to analyze 1- and 3-year clinical performances of narrow diameter implants (NDIs) versus regular diameter implants (RDIs). A search of electronic databases and a manual search was performed for the time period January 2000 to April 2018. A meta-regression was used to evaluate the effects of the "fixed effects" model on the implant survival rates, prosthesis success rates and marginal bone loss (MBL) with follow-up time of 1 year and 3 years. Of the 11 studies included, the overall combined 1-year implant survival rates were 98.14% for NDIs and 98.20% for RDIs. The overall combined 3-year implant survival rates were 98.71% for NDIs and 98.84% for RDIs. The corresponding values for 1-year prosthesis success rates were 96.94% for NDIs and 99.25% for RDIs. The corresponding values for 3-year prosthesis success rates were 89.25% for NDIs and 96.55% for RDIs. The meta-regression showed no significant differences between NDIs and RDIs regarding implant survival rates, prosthesis success rates, and MBL in 1-year and 3-year follow-up (P > .05). The results of this meta-analysis concluded that the implant diameter did not affect its survival rates, prosthesis success rates, and MBL in 1 and 3 years. The use of NDIs instead of bone augmentation procedures with RDIs did not affect its survival rates, prosthesis success rates, and MBL in the short-term and middle-term. However, more high-quality randomized controlled trials and long follow-up studies are needed on this topic.

CuSO4/H2O2-Triggered Polydopamine/Poly(sulfobetaine methacrylate) Coatings for Antifouling Membrane Surfaces.

Mussel-inspired polydopamine (PDA) coatings have been broadly exploited for constructing functional membrane surfaces. One-step codeposition of PDA with antifouling polymers, especially zwitterionic polymers, has been regarded as a promising strategy for fabricating antifouling membrane surfaces. However, one challenge is that the codeposition is usually a slow process over 10 h or even several days. Herein, we report that CuSO4/H2O2 is able to notably accelerate the codeposition process of PDA with poly(sulfobetaine methacrylate) (PSBMA). In our case, PSBMA is facilely anchored to the polypropylene microporous membrane (PPMM) surfaces within 1 h with the assistance of PDA because of its strong interfacial adhesion. The PDA/PSBMA-coated PPMMs show excellent surface hydrophilicity, high water permeation flux (7506 ± 528 L/m2·h at 0.1 MPa), and an outstanding antifouling property. Moreover, the antifouling property is maintained after the membranes are treated with acid and alkali solutions as well as organic solvents. To recap, it provides a facile, universal, and time-saving strategy for exploiting high-efficiency and durable antifouling membrane surfaces.

Effect of film thickness on morphological evolution in dewetting and crystallization of polystyrene/poly(ε-caprolactone) blend films.

In this Article, the morphological evolution in the blend thin film of polystyrene (PS)/poly(ε-caprolactone) (PCL) was investigated via mainly AFM. It was found that an enriched two-layer structure with PS at the upper layer and PCL at the bottom layer was formed during spinning coating. By changing the solution concentration, different kinds of crystal morphologies, such as finger-like, dendritic, and spherulitic-like, could be obtained at the bottom PCL layer. These different initial states led to the morphological evolution processes to be quite different from each other, so the phase separation, dewetting, and crystalline morphology of PS/PCL blend films as a function of time were studied. It was interesting to find that the morphological evolution of PS at the upper layer was largely dependent on the film thickness. For the ultrathin (15 nm) blend film, a liquid-solid/liquid-liquid dewetting-wetting process was observed, forming ribbons that rupture into discrete circular PS islands on voronoi finger-like PCL crystal. For the thick (30 nm) blend film, the liquid-liquid dewetting of the upper PS layer from the underlying adsorbed PCL layer was found, forming interconnected rim structures that rupture into discrete circular PS islands embedded in the single lamellar PCL dendritic crystal due to Rayleigh instability. For the thicker (60 nm) blend film, a two-step liquid-liquid dewetting process with regular holes decorated with dendritic PCL crystal at early annealing stage and small holes decorated with spherulite-like PCL crystal among the early dewetting holes at later annealing stage was observed. The mechanism of this unusual morphological evolution process was discussed on the basis of the entropy effect and annealing-induced phase separation.

Inhibiting effect of low-molecular weight polyols on the physico-chemical and structural deteriorations of gluten protein during storage of fresh noodles.

In this study, the inhibiting effects of low-molecular weight polyols on the deterioration of gluten network and noodle texture were systematically investigated, based on dough rheological properties, and the macroscopic, structural and water status changes of gluten protein during storage of fresh noodles. Both glycerol and propylene glycol significantly restrained the decrease of GMP gel weight, LA-SRC value, hardness and springiness, and the increase of cooking loss. SEM showed that polyols retarded the collapse of gluten network, with still continuous gluten fibrils. The inner structure of polyol noodles was much less damaged after 2 days, with more uniform moisture distribution in MRI images. Potential dynamic depolymerization and repolymerization interactions were detected for protein components during processing and cooking, which might contribute to the textural changes. Low-molecular weight polyols inhibited the collapse of gluten network and deterioration of noodle texture although they showed no inhibiting effect on microbial growth.

Identification of a functional polymorphism within the 3'-untranslated region of denticleless E3 ubiquitin protein ligase homolog associated with survival in acral melanoma.

BACKGROUND: High expression of denticleless E3 ubiquitin protein ligase homologue (DTL) correlates with poor disease-free survival and overall survival in cutaneous melanoma, but the molecular features and clinical significance of this gene in acral melanoma (AM) remain unclear. METHODS: The expression levels of DTL were compared between AM and benign melanocytic nevi using existing Gene Expression Omnibus data and validated in fresh frozen tissues. Two candidate tag single-nucleotide polymorphisms (SNPs) in the 3'-untranslated region (3'UTR) of DTL in patients with AM were sequenced and analysed for their association with survival in a discovery cohort (n = 570), and the significant SNP was subjected to a replication cohort (n = 201). The expression of DTL was evaluated by immunohistochemistry. The microRNA interacting with rs11275300:C > G was predicted using in silico target prediction tools and validated by in vitro analysis. RESULTS: DTL was overexpressed in AM compared with benign melanocytic nevi. rs11275300:C > G was found to be significantly associated with progression-free survival and overall survival of patients with AM in both cohorts and the combined cohort. Furthermore, the DTL expression level in the patients with the rs11275300:G allele was higher than that in patients with the CC genotype. In vitro analysis demonstrated that DTL was a direct target of hsa-miR-4672, and the rs11275300:G allele interfered with the binding affinity of hsa-miR-4672 with the 3'UTR of DTL and thereby increased DTL expression. CONCLUSION: The rs11275300:G allele in the 3'UTR of DTL may lead to a poor prognosis and allele-specific increase in the expression of DTL by post-transcriptional regulation in AM.

Dopamine-Triggered One-Step Polymerization and Codeposition of Acrylate Monomers for Functional Coatings.

Surface modification has been well recognized as a promising strategy to design and exploit diversified functional materials. However, conventional modification strategies usually suffer from complicated manufacture procedures and lack of universality. Herein, a facile, robust, and versatile approach is proposed to achieve the surface functionalization using dopamine and acrylate monomers via a one-step polymerization and codeposition process. The gel permeation chromatography, proton nuclear magnetic resonance, liquid chromatography-mass spectrometry, and UV-visible spectra results indicate that dopamine possesses the capability of triggering the polymerization of acrylate monomers into high-molecular-weight products, and the inherent adhesive ability of polydopamine can assist the polymerized products to deposit on various substrates. Besides, protein-resistant, antibacterial, and cell adhesion-resistant surfaces can be easily fabricated via the finely designed integration of corresponding acrylate monomers into the codeposition systems. This approach of in situ polymerization and codeposition significantly simplifies the fabrication process and provides more manifold choices for surface modification, which will open a new door for broadening the applications of polydopamine-based coatings.

Novel double-layer Silastic testicular prosthesis with controlled release of testosterone in vitro, and its effects on castrated rats.

Testicular prostheses have been used to deal with anorchia for nearly 80 years. Here, we evaluated a novel testicular prosthesis that can controllably release hormones to maintain physiological levels of testosterone in vivo for a long time. Silastic testicular prostheses with controlled release of testosterone (STPT) with different dosages of testosterone undecanoate (TU) were prepared and implanted into castrated Sprague-Dawley rats. TU oil was applied by oral administration to a separate group of castrated rats. Castrated untreated and sham-operated groups were used as controls. Serum samples from every group were collected to measure the levels of testosterone (T), follicle-stimulating hormone and luteinizing hormone (LH). Maximum intracavernous penile pressure (ICPmax) was recorded. The prostates and seminal vesicles were weighed and subjected to histology, and a terminal dexynucleotidyl transferase-mediated UTP nick end labeling (TUNEL) assay was used to evaluate apoptosis. Our results revealed that the weights of these tissues and the levels of T and LH showed significant statistical differences in the oral administration and TU replacement groups compared with the castrated group (P < 0.05). Compared with the sham-operated group, the ICPmax, histology and TUNEL staining for apoptosis, showed no significant differences in the hormone replacement groups implanted with medium and high doses of STPT. Our results suggested that this new STPT could release TU stably through its double semi-permeable membranes with excellent biocompatibility. The study provides a new approach for testosterone replacement therapy.

Surface phase separation, dewetting feature size, and crystal morphology in thin films of polystyrene/poly(ε-caprolactone) blend.

Thin films of polystyrene (PS)/poly(ε-caprolactone) (PCL) blends were prepared by spin-coating and characterized by tapping mode force microscopy (AFM). Effects of the relative concentration of PS in polymer solution on the surface phase separation and dewetting feature size of the blend films were systematically studied. Due to the coupling of phase separation, dewetting, and crystallization of the blend films with the evaporation of solvent during spin-coating, different size of PS islands decorated with various PCL crystal structures including spherulite-like, flat-on individual lamellae, and flat-on dendritic crystal were obtained in the blend films by changing the film composition. The average distance of PS islands was shown to increase with the relative concentration of PS in casting solution. For a given ratio of PS/PCL, the feature size of PS appeared to increase linearly with the square of PS concentration while the PCL concentration only determined the crystal morphology of the blend films with no influence on the upper PS domain features. This is explained in terms of vertical phase separation and spinodal dewetting of the PS rich layer from the underlying PCL rich layer, leading to the upper PS dewetting process and the underlying PCL crystalline process to be mutually independent.