A comprehensive analysis and literature review of vertebral artery variation in craniovertebral junction using three-dimensional computed tomography angiography.

PURPOSE: To describe vertebral artery (VA) variation in patients with or without osseous anomalies at congenital craniovertebral junction (CVJ). METHODS: In the present study, we retrospectively analyzed 258 patients with VA variation who underwent three-dimensional computed tomography angiography (3D CTA) in our hospital from March 2017 to October 2019. RESULTS: Among 258 patients, 180 were accompanied by skeleton structural malformation, including 105 cases of occipital ossification of the atlas, 8 cases of the bipartite atlas, 7 cases of hypoplasia of the posterior arch of the atlas, 45 cases of C2/3 congenital fusion, 2 cases of C2/3/4 congenital fusion, and 13 cases of congenital os odontoid. VA variation was divided into type A (VA variation in the CVJ area without osseous anomalies) and type B (VA variation in the CVJ area with osseous anomalies). There are totally 10 subtypes, including type A1 (atlas occipitalization with VA entrance approach close to middle line, 20.2%); type A2 (atlas occipitalization with VA entrance approach far from middle line, 30.2%); type A3 (first intersegmental VA in C1-C2, 1.9%); type A4 (fenestration of the VA, 2.3%); type A5 (VA bulging type, 6.6%); type A6 (VA exposures with the absence of the posterior atlas arch, 2.3%); type A7 (C2 inner wall type, 0.4%); type A8 (single vertebral artery, 2.3%); type B1 (posterior ponticuli, 2.7%); and type B2 (high-riding VA, 31.4%). CONCLUSION: This study is expected to take the lead in the most comprehensive classification of VA variation.

Treatment of irreducible atlantoaxial dislocation by bony deformity osteotomy, remodeling, releasing, and plate fixating through transoral approach.

OBJECTIVE: Investigate a novel method for treating irreducible atlantoaxial dislocation (IAAD) or with basilar invagination (BI) by bony deformity osteotomy, remodeling, releasing, and plate fixating through transoral approach. METHOD: From March 2015 to December 2019, 213 consecutive patients diagnosed as IAAD/BI were treated with transoral bony deformity remodeling and releasing combined with plate fixation. The main clinical symptoms include neck pain, headache, numbness of the limbs, weakness, unstable walking, inflexible hand-held objects, and sphincter dysfunction. The bony factors that impact reduction were divided into as follows: type A1 (sloping of upper facet joint in C2), type A2 (osteophyte in lateral mass joints between C1 and C2), type A3 (ball-and-socket deformity of lateral mass joint), type A4 (vertical interlocking between lateral mass joints of C1-C2), type A5 (regional bone fusion in lateral mass joints), type B1 (bony factor hindering reduction between the atlas-dens gap), type B2 (uncinate odontoid deformity), and type B3 (hypertrophic odontoid deformity). All of them were treated with bony deformity osteotomy, remodeling, and releasing techs. RESULT: The operation time was 144 [Formula: see text] 25 min with blood loss of 102 [Formula: see text] 35 ml. The average pre-operative ADI improved from 7.5 [Formula: see text] 3.2 mm pre-surgery to 2.5 [Formula: see text] 1.5 mm post-surgery (p < 0.05). The average VDI improved from 12.3 [Formula: see text] 4.8 mm pre-surgery to 3.3 [Formula: see text] 2.1 mm post-surgery (p < 0.05). The average pre-operative CMA improved from 115 [Formula: see text] 25° pre-surgery to 158 [Formula: see text] 21° post-surgery (p < 0.05); the pre-operative CAA changed from 101 [Formula: see text] 28° pre-surgery to 141 [Formula: see text] 10° post-surgery. After the operation, the clinic symptoms improved, and the JOA score improved from 9.3 [Formula: see text] 2.8 pre-operatively to 13.8 [Formula: see text] 2.5 in the sixth months of follow-up. CONCLUSION: In addition to soft tissue factors, bony obstruction was another important factor impeding atlantoaxial reduction. Transoral bony deformity osteotomy, remodeling, releasing combined with plate fixating was effective in treating IAAD/BI with bony obstruction factors.

Research on pharyngeal bacterial flora in transoral atlantoaxial operation and the postoperative follow-up study.

OBJECTIVES: To study the changes of bacterial flora after a series of preoperative oral disinfection and the postoperative recovery of nerve function of patients with craniovertebral junction disorders who were treated with transoral approach operations. METHODS: This research analyzed 20 cases collected from October 2009 to May 2010. All these patients were with CVJ disorders, including 8 males and 12 females, aged 2 to 66 (38.1 on average), and they were all treated with transoral approach operations. The mucosa samples of the posterior pharyngeal wall were sent for bacteria culture. These samples were collected by sterile cotton swabs at four crucial points, including 3 days before operation/before gargling, 3 days after continuous gargling/after anesthesia intubation on the day of operation, after intraoperative cleaning and washing of the mouth, and after intraoperative iodophor immersion. The microflora was stained by means of smear and further counted after an investigation by microscope. The neural function of patients was evaluated by the ASIA classification and the JOA scores. All patients but two with posterior stabilization performed respectively underwent transoral atlantoaxial reduction plate (TARP) fixation consecutively in the same sitting. A regular reexamination of cervical vertebra with lateral and open mouth X-ray, CT and MRI was conducted after operation to evaluate the reduction of atlantoaxial dislocation, internal fixation position, bone graft fusion, inflammatory lesions and tumor recurrence. RESULTS: This bacteriological research showed that the mucosa of the posterior pharyngeal wall of all the patients was in a sterile state after a series of oral preoperative preparations and intraoperative iodophor disinfection, which was considered as type I incision. The bacterial culture results of the mucosa samples of the posterior pharyngeal wall collected at different time points showed significant differences (χ2 = 42.762, P = 0.000). All the patients had improvement in ASIA, and their neural functions were improved to different levels after operation. There was a significant difference in JOA scores before and after operation (t = 8.677, P = 0.000). Postoperative imaging examination showed that the atlantoaxial screw position was good and firm, and the CVJ disorders were treated appropriately. CONCLUSION: It is safe and effective to cut the posterior pharyngeal muscle layer and implant internal fixation by means of transoral approach.

Classification and Surgical Treatment of Developmental Spinal Canal Stenosis at Atlas Level: A 15-Case Study.

STUDY DESIGN: A retrospective study. OBJECTIVE: Investigate the diagnosis and surgery strategy for treatment of development spinal canal stenosis (DSSA) at atlas plane based on computerized tography (CT) image characters. SUMMARY OF BACKGROUND DATA: The occurrence of spinal canal stenosis in the atlas plane is relatively rare compared with lower cervical. METHODS: Fifteen patients diagnosed with DSSA were included from 2014 to 2018. They are divided into four subgroups based on the character of CT images: group I (small size atlas), group II (hypertrophy of posterior arch of the atlas [PAA]), group III (incurved of PAA), and group IV (hypertrophy odontoid). RESULTS: There are type I 7, type II 3, type III 2, and group IV 3 in the 15 cases. All the patients received different surgery procedures respectively: (1) posterior arch osteotomy were performed for group I/III//IV without atlantoaxial dislocation, (2) posterior arch resect and replantation were performed for group II, (3) occipital cervical fixation and fusion were added to the patients with associated atlantoaxial dislocation (AAD), (4) a new method of odontoid reduce and atlantoaxial fixation by transoral approach were performed for group IV with associated AAD. All cases underwent surgery successfully which included posterior occipitocervical fixation (OCF) + posterior arch resection (PAR) eight cases, PAR four cases, posterior arch remodeling and re-implantation (PARR) two cases, and Dens remodeling + trans-oral anterior reduction and plate fixation (DR+TARP) one case without severe complications. All patients show different improvement in the symptoms. Japanese orthopaedic association score improved from 9.2 to 14.7 in 1 year follow-up. CONCLUSION: DSSA could be easily diagnosed and divided into four subgroups according to the character of CT image, corresponding surgery strategy could receive a fine clinical result.Level of Evidence: 4.

Treatment of Basilar Invagination With Klippel-Feil Syndrome: Atlantoaxial Joint Distraction and Fixation With Transoral Atlantoaxial Reduction Plate.

BACKGROUND: Klippel-Feil syndrome (KFS) is characterized by congenital vertebral fusion of the cervical spine and a wide spectrum of associated anomalies. In patients with KFS with basilar invagination (BI), compression of the brainstem and upper cervical cord results in neurological deficits, and decompression and occipitocervical reconstruction are required. The highly varied anatomy of KFS makes a posterior occipitocervical fixation strategy challenging. For these patients, the transoral atlantoaxial reduction plate (TARP) operation is an optimal option to perform a direct anterior fixation to achieve stabilization. OBJECTIVE: To evaluate the effectiveness of TARP internal fixation for the treatment of BI with KFS. METHODS: Ten consecutive patients with BI and KFS who underwent TARP reduction and fixation from 2010 to 2012 were reviewed. Clinical assessment and image measurements were performed preoperatively and at the most recent follow-up. Nine patients (9/10) were followed for an average of 31.44 months. RESULTS: Symptoms were alleviated in 9 of 9 patients (100.00%). The odontoid process was ideally corrected with the TARP system. The mean clivus canal angle improved from 124° preoperatively to 152° postoperatively. The average preoperative and postoperative Japanese Orthopedic Association scores were 10.56 (n = 9) and 14.67 (n = 9), respectively, indicating 63.82% improvement. There was bony bridge catenation on the computed tomography scans and no evidence of hardware failure at 6 months. CONCLUSION: The TARP operation is effective and safe for treating patients with BI with KFS. The midterm clinical results were satisfactory.

The development and evaluation of individualized templates to assist transoral C2 articular mass or transpedicular screw placement in TARP-IV procedures: adult cadaver specimen study.

OBJECTIVES: The transoral atlantoaxial reduction plate system treats irreducible atlantoaxial dislocation from transoral atlantoaxial reduction plate-I to transoral atlantoaxial reduction plate-III. However, this system has demonstrated problems associated with screw loosening, atlantoaxial fixation and concealed or manifest neurovascular injuries. This study sought to design a set of individualized templates to improve the accuracy of anterior C2 screw placement in the transoral atlantoaxial reduction plate-IV procedure. METHODS: A set of individualized templates was designed according to thin-slice computed tomography data obtained from 10 human cadavers. The templates contained cubic modules and drill guides to facilitate transoral atlantoaxial reduction plate positioning and anterior C2 screw placement. We performed 2 stages of cadaveric experiments with 2 cadavers in stage one and 8 in stage two. Finally, guided C2 screw placement was evaluated by reading postoperative computed tomography images and comparing the planned and inserted screw trajectories. RESULTS: There were two cortical breaching screws in stage one and three in stage two, but only the cortical breaching screws in stage one were ranked critical. In stage two, the planned entry points and the transverse angles of the anterior C2 screws could be simulated, whereas the declination angles could not be simulated due to intraoperative blockage of the drill bit and screwdriver by the upper teeth. CONCLUSIONS: It was feasible to use individualized templates to guide transoral C2 screw placement. Thus, these drill templates combined with transoral atlantoaxial reduction plate-IV, may improve the accuracy of transoral C2 screw placement and reduce related neurovascular complications.

The development and evaluation of individualized templates to assist transoral C2 articular mass or transpedicular screw placement in TARP-IV procedures: adult cadaver specimen study

OBJECTIVES: The transoral atlantoaxial reduction plate system treats irreducible atlantoaxial dislocation from transoral atlantoaxial reduction plate-I to transoral atlantoaxial reduction plate-III. However, this system has demonstrated problems associated with screw loosening, atlantoaxial fixation and concealed or manifest neurovascular injuries. This study sought to design a set of individualized templates to improve the accuracy of anterior C2 screw placement in the transoral atlantoaxial reduction plate-IV procedure. METHODS: A set of individualized templates was designed according to thin-slice computed tomography data obtained from 10 human cadavers. The templates contained cubic modules and drill guides to facilitate transoral atlantoaxial reduction plate positioning and anterior C2 screw placement. We performed 2 stages of cadaveric experiments with 2 cadavers in stage one and 8 in stage two. Finally, guided C2 screw placement was evaluated by reading postoperative computed tomography images and comparing the planned and inserted screw trajectories. RESULTS: There were two cortical breaching screws in stage one and three in stage two, but only the cortical breaching screws in stage one were ranked critical. In stage two, the planned entry points and the transverse angles of the anterior C2 screws could be simulated, whereas the declination angles could not be simulated due to intraoperative blockage of the drill bit and screwdriver by the upper teeth. CONCLUSIONS: It was feasible to use individualized templates to guide transoral C2 screw placement. Thus, these drill templates combined with transoral atlantoaxial reduction plate-IV, may improve the accuracy of transoral C2 screw placement and reduce related neurovascular complications. .