PGMD/curcumin nanoparticles for the treatment of breast cancer.

The present study aims at developing PGMD (poly-glycerol-malic acid-dodecanedioic acid)/curcumin nanoparticles based formulation for anticancer activity against breast cancer cells. The nanoparticles were prepared using both the variants of PGMD polymer (PGMD 7:3 and PGMD 6:4) with curcumin (i.e. CUR NP 7:3 and CUR NP 6:4). The size of CUR NP 7:3 and CUR NP 6:4 were found to be ~ 110 and 218 nm with a polydispersity index of 0.174 and 0.36, respectively. Further, the zeta potential of the particles was - 18.9 and - 17.5 mV for CUR NP 7:3 and CUR NP 6:4, respectively. The entrapment efficiency of both the nanoparticles was in the range of 75-81%. In vitro anticancer activity and the scratch assay were conducted on breast cancer cell lines, MCF-7 and MDA-MB-231. The IC50 of the nanoformulations was observed to be 40.2 and 33.6 µM at 48 h for CUR NP 7:3 and CUR NP 6:4, respectively, in MCF-7 cell line; for MDA-MB-231 it was 43.4 and 30.5 µM. Acridine orange/EtBr and DAPI staining assays showed apoptotic features and nuclear anomalies in the treated cells. This was further confirmed by western blot analysis that showed overexpression of caspase 9 indicating curcumin role in apoptosis.

Gum polysaccharide/nanometal hybrid biocomposites in cancer diagnosis and therapy.

Biopolymers are of prime importance among which gum polysaccharides hold an eminent standing owing to their high availability and non-toxic nature. Gum biopolymers offer a greener alternative to synthetic polymers and toxic chemicals in the synthesis of metal nanostructures. Metal nanostructures accessible via eco-friendly means endow astounding characteristics to gum-based biocomposites in the field of diagnosis and therapy towards cancer diseases. In this review, assorted approaches for the assembly of nanomaterials mediated by gum biopolymers are presented and their utility in cancer diagnosis and therapy, e.g., bioimaging, radiotherapy, and phototherapy, are deliberated to provide a groundwork for future stimulative research.

Simultaneous delivery of chemotherapeutic and thermal-optical agents to cancer cells by a polymeric (PLGA) nanocarrier: an in vitro study.

PURPOSE: To test the effectiveness of a dual-agent-loaded PLGA nanoparticulate drug delivery system containing doxorubicin (DOX) and indocyanine green (ICG) in a DOX-sensitive cell line and two resistant cell lines that have different resistance mechanisms. METHODS: The DOX-sensitive MES-SA uterine sarcoma cell line was used as a negative control. The two resistant cell lines were uterine sarcoma MES-SA/Dx5, which overexpresses the multidrug resistance exporter P-glycoprotein, and ovarian carcinoma SKOV-3, which is less sensitive to doxorubicin due to a p53 gene mutation. The cellular uptake, subcellular localization and cytotoxicity of the two agents when delivered via nanoparticles (NPs) were compared to their free-form administration. RESULTS: The cellular uptake and cytotoxicity of DOX delivered by NPs were comparable to the free form in MES-SA and SKOV-3, but much higher in MES-SA/Dx5, indicating the capability of the NPs to overcome P-glycoprotein resistance mechanisms. NP-encapsulated ICG showed slightly different subcellular localization, but similar fluorescence intensity when compared to free ICG, and retained the ability to generate heat for hyperthermia delivery. CONCLUSION: The dual-agent-loaded system allowed for the simultaneous delivery of hyperthermia and chemotherapy, and this combinational treatment greatly improved cytotoxicity in MES-SA/Dx5 cells and to a lesser extent in SKOV-3 cells.

Diosgenin Loaded Polymeric Nanoparticles with Potential Anticancer Efficacy.

This study aims to determine the anticancer efficacy of diosgenin encapsulated poly-glycerol malate co-dodecanedioate (PGMD) nanoparticles. Diosgenin loaded PGMD nanoparticles (variants 7:3 and 6:4) were synthesized by the nanoprecipitation method. The synthesis of PGMD nanoparticles was systematically optimized employing the Box-Behnken design and taking into account the influence of various independent variables such as concentrations of each PGMD, diosgenin and PF-68 on the responses such as size and PDI of the particles. Mathematical modeling was done using the Quadratic second order modeling method and response surface analysis was undertaken to elucidate the factor-response relationship. The obtained size of PGMD 7:3 and PGMD 6:4 nanoparticles were 133.6 nm and 121.4 nm, respectively, as measured through dynamic light scattering (DLS). The entrapment efficiency was in the range of 77-83%. The in vitro drug release studies showed diffusion and dissolution controlled drug release pattern following Korsmeyer-Peppas kinetic model. Furthermore, in vitro morphological and cytotoxic studies were performed to evaluate the toxicity of synthesized drug loaded nanoparticles in model cell lines. The IC50 after 48 h was observed to be 27.14 µM, 15.15 µM and 13.91 µM for free diosgenin, PGMD 7:3 and PGMD 6:4 nanoparticles, respectively, when administered in A549 lung carcinoma cell lines.

Preparation, characterization and in vitro drug release studies of novel polymeric nanoparticles.

Polymeric nanoparticles of AADG cross-linked with MBA encapsulating water soluble macromolecules such as FITC-Dextran have been prepared in the reverse micellar system. The particles obtained were of >85nm in diameter which were highly monodisperse. An optically clear solution was obtained on redispersing these nanoparticles in aqueous buffer. Size and morphology of the particles remains the same on re-dispersing the lyophilized powder of these nanoparticles in aqueous buffer. The size dependency of the particles on the monomer and surfactant concentration was observed. The average size of the nanoparticles as obtained from DLS studies ranges from 74 to 114nm in case 0.06M AOT and 62-104nm in case of 0.1M AOT concentration. FITC-Dextran was entrapped into nanoparticles with high efficiency (>70%). The pH dependent release of the entrapped molecules from these nanoparticles was also studied. At pH 5.0 solution, approximately 43% of FITC-Dx was released and at pH 7.4 it was about 70%.

Targeted nanoparticles for simultaneous delivery of chemotherapeutic and hyperthermia agents--an in vitro study.

The purpose of this study was to prepare targeted Poly lactide-co-glycolide (PLGA) nanoparticles with simultaneous entrapment of indocyanine green (ICG) and doxorubicin (DOX) by surface decorating them with tumor specific monoclonal antibodies in order to achieve simultaneous therapy and imaging. ICG was chosen as an imaging and hyperthermia agent and DOX was used as a chemotherapeutic agent. ICG and DOX were incorporated into PLGA nanoparticles using the oil-in-water emulsion solvent evaporation technique. These nanoparticles were further surface decorated with antibodies against Human Epithelial Receptor-2 (HER-2) using carbodiimide chemistry. The uptake of antibody conjugated ICG-DOX-PLGA nanoparticles (AIDNP) was enhanced in SKOV-3 (HER-2 overexpressing cell lines) compared to their non-conjugated counterparts (ICG-DOX-PLGA nanoparticles (IDNP)). The uptake of antibody conjugated ICG-DOX-PLGA nanoparticles, however, was similar in MES-SA and MES-SA/Dx5 cancer cells (HER-2 negative cell lines), which were used as negative controls. The cytotoxicity results after laser treatment (808 nm, 6.7 W/cm(2)) showed an enhanced toxicity in treatment of SKOV-3. The negative controls exhibited comparable cytotoxicity with or without exposure to the laser. Thus, this study showed that these antibody conjugated ICG-DOX-PLGA nanoparticles have potential for combinatorial chemotherapy and hyperthermia.

Covalent IR820-PEG-diamine nanoconjugates for theranostic applications in cancer.

Near-infrared dyes can be used as theranostic agents in cancer management, based on their optical imaging and localized hyperthermia capabilities. However, their clinical translatability is limited by issues such as photobleaching, short circulation times, and nonspecific biodistribution. Nanoconjugate formulations of cyanine dyes, such as IR820, may be able to overcome some of these limitations. We covalently conjugated IR820 with 6 kDa polyethylene glycol (PEG)-diamine to create a nanoconjugate (IRPDcov) with potential for in vivo applications. The conjugation process resulted in nearly spherical, uniformly distributed nanoparticles of approximately 150 nm diameter and zeta potential -0.4±0.3 mV. The IRPDcov formulation retained the ability to fluoresce and to cause hyperthermia-mediated cell-growth inhibition, with enhanced internalization and significantly enhanced cytotoxic hyperthermia effects in cancer cells compared with free dye. Additionally, IRPDcov demonstrated a significantly longer (P<0.05) plasma half-life, elimination half-life, and area under the curve (AUC) value compared with IR820, indicating larger overall exposure to the theranostic agent in mice. The IRPDcov conjugate had different organ localization than did free IR820, with potential reduced accumulation in the kidneys and significantly lower (P<0.05) accumulation in the lungs. Some potential advantages of IR820-PEG-diamine nanoconjugates may include passive targeting of tumor tissue through the enhanced permeability and retention effect, prolonged circulation times resulting in increased windows for combined diagnosis and therapy, and further opportunities for functionalization, targeting, and customization. The conjugation of PEG-diamine with a near-infrared dye provides a multifunctional delivery vector whose localization can be monitored with noninvasive techniques and that may also serve for guided hyperthermia cancer treatments.

Nanoplexes for cell imaging and hyperthermia: in vitro studies.

Novel IR820-polyethylene glycol-diamine nanoplexes (IR820-PDNCs) have potential multifunctional imaging-hyperthermia applications in cancer. Nanoplexes were formulated by ionic interaction and characterized in vitro for their imaging and hyperthermia capabilities. The resulting nanoplexes were approximately 50 nm diameter, with a zeta potential of 2.0 +/- 0.9 mV, and able to generate heat upon exposure to 808 nm laser. Cytotoxicity studies in SKOV-3, MES-SA and Dx5 cancer cell lines demonstrate comparable cytotoxicity of IR820-PDNCs versus free IR820 after 24 hours. The nanoplexes are able to produce hyperthermic cell growth inhibition in all three cancer cell lines after excitation with laser. The level of cell growth inhibition caused by hyperthermia is significantly higher for IR820-PDNCs compared to IR820 in MES-SA and Dx5 cells. Fluorescent microscope images after 2.5-hour exposure to 5 microM IR820-PDNCs or 5 microM free IR820 show increased uptake for IR820-PDNCs compared to free IR820, especially for SKOV-3 and Dx5 cancer cells. This formulation can potentially be used in multifunctional cancer theranostics.

Preparation and characterization of a polymeric (PLGA) nanoparticulate drug delivery system with simultaneous incorporation of chemotherapeutic and thermo-optical agents.

The objective of this study was to develop biodegradable poly(DL-lactide-co-glycolic acid) (PLGA) nanoparticles simultaneously loaded with indocyanine green (ICG) and doxorubicin (DOX). The modified oil in water single emulsion solvent evaporation method was used. To enhance the incorporation of both agents and control particle size, four independent processing parameters including amount of polymer, initial ICG content, initial DOX content, and concentration of poly-vinyl alcohol (PVA) were investigated. The ICG and DOX entrapment in nanoparticles as well as the nanoparticle size were determined. The nanoparticles produced by standardized formulation were in the range of 171+/-2 nm (n=3) with low polydispersity index (0.040+/-0.014, n=3). The entrapment efficiency was determined by spectrofluorometer measurements. The efficiency was 44.4+/-1.6% for ICG and 74.3+/-1.9% for DOX. Drug loading was 0.015+/-0.001%, w/w, for ICG and 0.022+/-0.001%, w/w, for DOX (n=3). The release pattern was biphasic. ICG and DOX loaded-nanoparticle preparation was standardized based on the following parameters: PLGA concentration, PVA concentration and initial drug content.

Artificial oxygen carrier based on polysaccharides-poly(alkylcyanoacrylates) nanoparticle templates.

Biomimetic nanoparticles based on polysaccharides-poly(alkylcyanoacrylates) copolymers were initially developed in view of drug delivery. Core-shell nanoparticles covered with a sufficiently long brush of polysaccharides were shown to be very low complement activators and have the potential for long circulation times in the bloodstream. Such nanoparticles bearing haemoglobin were envisaged as potential red cell substitutes. Different core-shell nanoparticles with a brush shell made of dextran, dextran-sulphate, or heparin were prepared and haemoglobin (Hb) could be adsorbed on their surface. Benzene tetracarboxylic acid (BTCA) was used as a coupling agent for Hb to dextran-coated nanoparticles; the Hb loading capacity of the dextran nanoparticles showed a 9.3 fold increased. The coupled Hb maintained the allosteric properties of free Hb. While modification of nanoparticles by BTCA slightly increased complement activation, the further addition of Hb totally reversed this effect providing Hb-loaded nanoparticles with a very low level of complement activation. Such nanoparticles could be a suitable alternative to haemoglobin solutions in the development of a blood substitute.