Tissue Characteristics in Endodontic Regeneration: A Systematic Review.

The regenerative endodontic procedure (REP) represents a treatment option for immature necrotic teeth with a periapical lesion. Currently, this therapy has a wide field of pre-clinical and clinical applications, but no standardization exists regarding successful criteria. Thus, by analysis of animal and human studies, the aim of this systematic review was to highlight the main characteristics of the tissue generated by REP. A customized search of PubMed, EMBASE, Scopus, and Web of Science databases from January 2000 to January 2022 was conducted. Seventy-five human and forty-nine animal studies were selected. In humans, the evaluation criteria were clinical 2D and 3D radiographic examinations. Most of the studies identified a successful REP with an asymptomatic tooth, apical lesion healing, and increased root thickness and length. In animals, histological and radiological criteria were considered. Newly formed tissues in the canals were fibrous, cementum, or bone-like tissues along the dentine walls depending on the area of the root. REP assured tooth development and viability. However, further studies are needed to identify procedures to successfully reproduce the physiological structure and function of the dentin-pulp complex.

Autistic patients: a retrospective study on their dental needs and the behavioural approach.

INTRODUCTION: Autism spectrum disorder (ASD) is a lifelong heterogeneous psychiatric disorder that represents a challenge for dentists. The aim of this retrospective study was to analyse ASD patients' dental needs and to investigate key factors influencing the behavioural management. MATERIALS AND METHODS: One hundred eighteen ASD subjects (levels 2 and 3 of the DSM-5), adults and children, treated at university dental hospital, were included. For each of them, an index card was created to record general and medical information, dental care progress and treatment management. Data were analysed to characterize this specific population in terms of dental needs, technical approach and follow-up. The relationships between care approach and age (ANOVA test), care approach and concomitant pathologies as well as care approach and required treatment (chi-square test) were evaluated. RESULTS: Almost all patients required oral care. No treatment could be provided under conscious conditions. Oral premedication and/or nitrous oxide/oxygen inhalation was significantly more efficient in children and allowed conservative procedures. In adults, general anaesthesia was significantly more employed. Few patients were followed up over a long period. CONCLUSIONS: The variety of autism spectrum disorders complicates the statement of guidelines for dental care. The development of the collaboration between psychiatrics and dentists emerges as a key factor to improve the quality and the success of oral outpatient treatment. CLINICAL RELEVANCE: Oral premedication and/or nitrous oxide/oxygen inhalation at high dose represented a good way to carry out conservative dental cares, with a significant efficiency in children. Nevertheless, in a considerable number of ASD patients, especially in adults, general anaesthesia could not be avoided.

Cleft palate with/without cleft lip in French children: radiographic evaluation of prevalence, location and coexistence of dental anomalies inside and outside cleft region.

INTRODUCTION: Prevalence of dental anomalies in cleft patients is higher than that in general population. The objectives of this study were to assess the prevalence of dental anomalies and their coexistence in French children with cleft and, then, to investigate the relation between the dental anomalies and the cleft type. MATERIAL AND METHODS: Seventy-four non-syndromic cleft patients (6-16 years old) from Lille Regional University and Mondor-Chenevier Hospitals (France) were included. Clefts were classified as right/left unilateral cleft lip and palate (UCLP), bilateral cleft lip and palate (BCLP) and cleft palate (CP). Dental anomalies were investigated on panoramic radiographs and categorized as agenesis, supernumerary teeth, incisor rotations, impacted canines and shape anomalies. Prevalence and gender distribution of dental anomalies, mean number of affected teeth per patient, agenesis occurrence and location, and coexistence of dental anomalies were analysed by cleft type. RESULTS: 96.0% of patients presented at least one dental anomaly (agenesis 83.8%, incisor rotations 25.7%, shape anomalies 21.6%, impacted canines 18.9%, supernumerary teeth 8.1%). BCLP patients had a higher number of affected teeth, and left UCLP patients had a higher one compared to right UCLP patients. Distribution of inside (45.3%) and outside (54.7%) cleft region agenesis was similar. Adjacent (31.8%) and not adjacent (33.3%) combined dental anomalies were often encountered. CONCLUSIONS: Dental anomalies were localized inside as well as outside cleft region and were often associated with each other. BCLP patients were more affected. CLINICAL RELEVANCE: Early radiographic evaluation allows a comprehensive diagnosis of inside and outside cleft region anomalies, required for the multidisciplinary dental treatment.

In vitro remineralization by various ion-releasing materials of artificially demineralized dentin: A micro-CT study.

OBJECTIVE: The aim of this study was to evaluate the remineralizing properties of ion-releasing restorative materials on pH cycling-induced carious dentin. METHODS: Fifty sound molars were freshly extracted. The occlusal surfaces were abraded using water-cooled sandpaper (800 grit). The residual crowns were embedded in self-cured acrylic resin with the flat dentin surface exposed. A mesio-distal trench was created using a calibrated 0.5 mm deep occlusal reduction burr, and artificial dentin caries were generated by pH cycling. Then, teeth were randomly assigned to five groups according to the ion-releasing material used. For each sample, micro-CT acquisitions were performed at various intervals. Remineralization was assessed by mean gray value (MGV) measurements after registration and segmentation of the region of interest with 3D Slicer software. One-way repeated-measures ANOVA followed by Tukey's post hoc test was used to investigate the difference in MGVs among the various groups. RESULTS: Only Cention Forte showed significantly increased MGVs after 4 weeks compared to demineralized dentin. MGVs were higher, but not significantly, after placement of the restorative materials, including in the resin composite control group. These results can be explained by the radiopacity of the materials. SIGNIFICANCE: Cention Forte, the material with the highest radiopacity, showed a significant increase in the MGVs of artificially carious dentin after 4 weeks. However, the study of dentin remineralization by micro-CT could be impacted by the radiopacity of the restorative materials used. The relevance of this examination for the study of dentinal remineralization should be investigated.

Characteristics of Large Animal Models for Current Cell-Based Oral Tissue Regeneration.

The recent advances in the field of cell-based therapeutics open promising perspectives for oral tissue regeneration. The development of large animal models, which overcome the limits of the rodent models and allow to emulate clinical situations, is crucial for the validation of regenerative strategies to move toward clinical application. Currently, porcine, canine, and ovine models are mainly developed for oral regeneration and their specific characteristics have an impact on the outcomes of the studies. Thus, this systematic review investigates the application of porcine, canine, and ovine models in present cell-based oral regeneration, according to the species characteristics and the targeted tissue to regenerate. A customized search of PubMed, EMBASE, Scopus, and Web of Science databases from January 2015 to March 2020 was conducted. Relevant articles about cell-based oral tissues engineering in porcine, canine, and ovine models were evaluated. Among the evaluated articles, 58 relevant studies about cell-based oral regeneration in porcine, canine, and ovine models matched the eligibility criteria and were selected for full analysis. Porcine models, the most similar species with humans, were mostly used for bone and periodontium regeneration; tooth regeneration was reported only in pig, except for one study in dog. Canine models were the most transversal models, successfully involved for all oral tissue regeneration and notably in implantology. However, differences with humans and ethical concerns affect the use of these models. Ovine models, alternative to porcine and canine ones, were mainly used for bone and, scarcely, periodontium regeneration. The anatomy and physiology of these animals restrain their involvement. If consistency was found in defect specificities and cell trends among different species animal models of bone, dentin-pulp complex, or tooth regeneration, variability appeared in periodontium. Regeneration assessment methods were more elaborate in porcines and canines than in ovines. Risk of bias was low for selection, attrition and reporting, but unclear for performance and detection. Overall, if none of the large animal models can be considered an ideal one, they are of deemed importance for oral cell-based tissue engineering and researchers should consider their relevance to establish favorable conditions for a given preclinical cell-based therapeutics. Impact statement This systematic review investigates porcine, canine, and ovine models for current oral cell-based regeneration procedures, and researchers could refer to it for the choice of the most pertinent preclinical model for a given cell-based therapeutics.

The influence of image display systems on observers' preference for visualizing subtle dental radiographic abnormalities.

OBJECTIVE: The objectives of this study were to assess observers' preference for standard screens (SSs) or medical displays (MDs) in visualizing difficult-to-diagnose radiographic dental abnormalities and their preference for dental filter tools when utilized with MD systems. STUDY DESIGN: A retrospective data set of 60 in vivo radiographs consisting of intraoral (n = 20), panoramic (n = 20), and cone beam computed tomography (n = 20) images was created. Three image display monitors, including an SS, an MD, and an MD with 3 dental filter configurations (bone-low density enhancement filter, tooth-high density enhancement filter, and a combined filter representing regular MD), were utilized to assess 4 observers' monitor preferences in detecting radiographically subtle dental abnormalities. The data were analyzed by using binomial distribution. A P value ≤.05 was considered statistically significant. RESULTS: Although observers expressed preference for MD for visualizing some abnormalities when examining intraoral and panoramic radiographs, MD was not preferred for detection of any abnormalities with cone beam computed tomography. There were no significant differences in preference for SS or MD overall (P ≥ .2024). Observers expressed significant preference for the filters in visualizing all but 2 abnormalities (P ≤ .0252). CONCLUSIONS: The use of MD monitors enabled with dental filter tools may be preferred for visualizing certain subtle abnormalities.

Cone beam CT optimisation for detection of vertical root fracture with metal in the field of view or the exomass.

Dose optimisation has been revisited in the literature due to the frequent use of cone beam computed tomography (CBCT). Although the reduction of the field-of-view (FOV) size has shown to be an effective strategy, this indirectly increases the negative effect from the exomass. The aim of this study was to evaluate the diagnostic accuracy of an optimised CBCT protocol in the detection of simulated vertical root fracture (VRF) in the presence of metal in the exomass and/or inside the FOV. Twenty teeth were endodontically instrumented and VRF was induced in half of them. All teeth were individually placed in a human mandible covered with a soft tissue equivalent material, metallic materials were placed at different dispositions in the exomass and/or endomass, and CBCT scans were obtained at two dose protocols: standard and optimised. Five radiologists evaluated the images and indicated the presence of VRF using a 5-point scale. Area under the ROC curve (AUC), sensitivity, and specificity were calculated and compared using ANOVA (α = 0.05). Overall, AUC, sensitivity, and specificity did not differ significantly (p > 0.05) between the dose protocols. In conclusion, optimised dose protocols should be considered in the detection of simulated VRF irrespective of the occurrence of artefacts from metallic materials in the exomass and/or inside the FOV.

Influence of the exomass on the detection of simulated root fracture in cone-beam CT - an ex-vivo study.

OBJECTIVES: To evaluate the influence of exomass-related metal artefacts on the detection of simulated vertical root fracture (VRF) in cone-beam computed tomography (CBCT). METHODS: 20 teeth were endodontically instrumented and VRF was induced in half of them. All teeth were individually placed in an empty socket of a human mandible. Metallic materials were differently arranged in the exomass [zone outside of the field of view (FOV) but between the X-ray source and the receptor] and/or endomass (zone inside of the FOV), and CBCT scans were obtained. Four radiologists evaluated the presence of VRF using a 5-point scale. Sensitivity, specificity, and area under the receiver operating curve (AUC) were compared using ANOVA. Also, the tooth of interest was replaced with a tube filled with a radiopaque solution and all CBCT scans were repeated to analyse the data objectively. Mean grey and noise values were obtained from the tube and compared using ANOVA followed by Tukey's test (α = 0.05). RESULTS: Mean grey values were significantly lower and noise was significantly higher when metallic materials were present in the endomass or both the exomass and endomass. Sensitivity, specificity, and AUC were not influenced by the artefacts from the metallic materials irrespective of the arrangement condition. CONCLUSIONS: Exomass-related metal artefacts did not influence the diagnosis of simulated VRF in CBCT.

Update on a rare mandibular osteolytic lesion in childhood: the buccal bifurcation cyst.

Buccal bifurcation cyst is a rare, uncommon buccal cystic lesion associated with the permanent mandibular first molar in children just prior to tooth eruption, and is categorized by the World Health Organization as an odontogenic cyst occurring in a vital tooth, near the buccal cervical margin of the lateral aspect of a root, as a result of an inflammatory process in a periodontal pocket. The aim of this study is to present a series of three similar mandibular buccal bifurcation cyst cases, by providing clinical, radiological and histological characterization of the lesion, in order to lead clinicians through the diagnosis, treatment and follow-up process and contribute to deeper knowledge of this rare pathological entity.

Comparative evaluation of the accuracy of linear measurements between cone beam computed tomography and 3D microtomography.

OBJECTIVE: The aim of this study was to evaluate the influence of artifacts on the accuracy of linear measurements estimated with a common cone beam computed tomography (CBCT) system used in dental clinical practice, by comparing it with microCT system as standard reference. MATERIALS AND METHODS: Ten bovine bone cylindrical samples containing one implant each, able to provide both points of reference and image quality degradation, have been scanned by CBCT and microCT systems. Thanks to the software of the two systems, for each cylindrical sample, two diameters taken at different levels, by using implants different points as references, have been measured. Results have been analyzed by ANOVA and a significant statistically difference has been found. RESULTS AND DISCUSSION: Due to the obtained results, in this work it is possible to say that the measurements made with the two different instruments are still not statistically comparable, although in some samples were obtained similar performances and therefore not statistically significant. CONCLUSION: With the improvement of the hardware and software of CBCT systems, in the near future the two instruments will be able to provide similar performances.

Microtomographic and morphometric characterization of a bioceramic bone substitute in dental implantology.

In recent years, bone tissue regeneration studies have led to a deeper knowledge of chemical and structural features of the best biomaterials to be used as replacements for lost bone structures, with the autologus bone still today the only graft material able to ostegenerate, osteinduct and/or osteoconduct. The difficulties of the small available amount of autologus bone, together with morbidity of a second surgical operation on the same patient, have been overcome using both synthetic and biologic substitute bones. The possibility of investigating morphometric characteristics of substitute bones makes it possible to evaluate the predictability of regenerative processes and, so far, a range of different methods have been used for the purpose. X-ray microtomography (micro-CT) is a miniaturized form of conventional tomography, able to analyze the internal structure of small objects, performing three-dimensional images with high spatial resolution (< 10 micron pixel size). For a correct analysis, samples need not be altered or treated in any way, as micro-CT is a non-invasive and non-destructive technique. It shows promising results in biomaterial studies and tissue engineering. This work shows the potential applications of this microtomographic technique by means of an in vitro analysis system, in characterizing morphometric features of human bone tissue, and contributes to the use of this technique in studies concerning biomaterials and bioscaffolds inserted in bone tissue.

Management of the Schneiderian membrane perforation during the maxillary sinus elevation procedure: a case report.

The maxillary sinus elevation is a standard and predictable procedure allowing the realization of dental implant rehabilitation in patients with severe bone atrophy in the lateral-posterior areas of the maxilla. Despite the presence of validated surgical methods and the broad availability of biomaterials, the procedures aimed at increasing the bone volume by lateral antrostomy still entail complications with different degrees of relevance. The prosthetic and surgical outcome is based on a successful coping with these aspects. The perforation of the Schneiderian membrane is one of the most frequent events for which a variety of protocols and approaches have been suggested by different authors. In this work is presented a case study in which a technique to repair the sinus mucosa laceration occurring during a maxillary sinus elevation procedure has been successfully adopted.