Development and validation of the Italian version of the Orofacial Esthetic Scale (OES-I).

OBJECTIVE: To develop an Italian version of the Orofacial Esthetic Scale (OES-I), validated in a prosthodontic and non-prosthodontic patients' cohort, for clinicians and researchers to use in their practice. MATERIALS AND METHODS: The OES-I was obtained with a process of translation and back translation from the English version of the questionnaire (OES-E). The psychometric properties of the obtained version were then observed in a group of 70 prosthodontic and 70 non-prosthodontic patients. Validity (discriminative and convergent) and reliability (internal and external) were measured. Also, CFA (confirmatory factor analysis) was run, and several models were obtained. RESULTS: The OES-I scores were much higher for patients who were not scheduled for an esthetic prosthodontic treatment (p < 0.05); similarly, the same analysis conducted by a clinicians provided similar results (Pearson's coefficient = 0.93, p < 0.05). Reliability results show that the different items of the questionnaire are consistent within the test (Cronbach alpha = 0.93) and that the obtained results are stable within a reasonable time period (test-retest reliability = 0.98). The Final CFA model showed that OES score can properly characterize orofacial esthetic. CONCLUSIONS: The OES-I is a reliable means both for clinicians and researchers to assess patients' self-perceived esthetic. CLINICAL RELEVANCE: The OES-I can be used effectively for measuring the self-perceived esthetic appearance in all areas of dental practice and research.

Patient preference and clinical working time between digital scanning and conventional impression making for implant-supported prostheses: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: The technology behind optical scanners has greatly improved recently, making their dental application advantageous. While their accuracy is now comparable with that of conventional impression materials, whether these techniques have other advantages is unclear. PURPOSE: The purpose of this systematic review and meta-analysis was to determine whether digital scanning for implant-supported restorations is more time-efficient and convenient for the patient. MATERIAL AND METHODS: The study was conducted on September 23, 2020 using 4 different databases (Medline, Cochrane, Web of Science, Scopus) searching for clinical studies that compared the time needed and/or patient perceptions between those who had undergone the digital scanning procedure and those who had undergone conventional impression making. RESULTS: Twelve studies met the inclusion criteria for qualitative and quantitative analysis. Outcome variables were measured as standard mean differences (SMDs) by following a fixed-effects model or random-effects model (in the case of high heterogeneity). Digital scanning was more time-efficient and was preferred by patients for all 4 analyzed outcomes (comfort, anxiety, nausea, time perception). CONCLUSIONS: Digital scanning was found to be more time-efficient and convenient than conventional impression making for implant-supported restorations. Additional randomized controlled trials are needed to confirm the findings of this review.

Proximal Contact Loss in Implant-Supported Restorations: A Systematic Review and Meta-Analysis of Prevalence.

PURPOSE: This is a systematic review and meta-analysis to estimate the overall prevalence of proximal contact loss (PCL) and determine the distribution and clinical features of PCL. METHODS: This systematic review was conducted following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines. As this was a systematic review of prevalence, the condition, context, and population framework was followed. The focus question was: What is the prevalence and distribution of PCL in implant-supported restorations? Two investigators independently examined the literature in four databases (Medline, Scopus, Web of Science, and Cochrane) for suitable articles published before November 11, 2020, with no start-date restriction; an additional search was conducted by hand. A standardized data extraction chart was utilized to extract the relevant information from the selected studies. RESULTS: Fifteen studies met the inclusion criteria. A total of 11,699 restorations were evaluated in the final sample. The overall prevalence was 20% at the implant restoration level (among 4984 implants) and 26.6% at the contact point level (among 2603 contact points). The frequency of PCL was higher on the mesial side, both at the implant restoration level (13.8%) and at the contact point level (21.9%), than on the distal side, where the prevalence was 3.3% and 11.0%, respectively. The event rate in the maxilla and in the mandible at the contact level was 21.4% and 21.9%, respectively. CONCLUSIONS: PCL is a frequent complication. Approximately 29% of contact points develop this condition, which may cause food impaction and damage to the interproximal tissues.

Hard and Soft Tissue Evaluation of Different Socket Preservation Procedures Using Leukocyte and Platelet-Rich Fibrin: A Retrospective Clinical and Volumetric Analysis.

PURPOSE: The extraction of a tooth is followed by hard and soft tissue changes that can compromise implant placement. The aim of the present retrospective study was to compare the clinical and radiographic outcomes of different ridge preservation procedures based on the use of leukocyte and platelet-rich fibrin (L-PRF). MATERIALS AND METHODS: The study population consisted of all patients who had undergone surgery from January 1, 2017 to January 1, 2018 for alveolar ridge preservation on single posterior teeth using 3 clinical protocols: L-PRF alone, L-PRF mixed with a bone xenograft, and bone xenograft alone. Clinical and radiographic measures were recorded preoperatively and at 6 months postoperatively to determine the horizontal and vertical ridge resorption. RESULTS: A total of 45 patients were included in the present study. All the surgeries were performed successfully, and no intraoperative complications developed. The L-PRF group experienced significantly greater horizontal and vertical bone resorption. The L-PRF plus bone xenograft group had less vertical and horizontal bone resorption than the bone xenograft alone group. Statistically significant differences in postoperative pain and wound healing were observed, with the bone xenograft alone group, in particular, having higher values for pain and experiencing delayed wound healing. CONCLUSIONS: Within the limitations of the present retrospective study, the use of a bone xenograft alone or L-PRF combined with a bone xenograft to perform alveolar ridge preservation procedures significantly limited bone resorption.

Management of Single Uncomplicated Dental Extractions and Postoperative Bleeding Evaluation in Patients With Factor V Deficiency: A Local Antihemorrhagic Approach.

PURPOSE: The aim of the present study was to analyze the management of single dental extractions and postoperative bleeding in patients with a diagnosis of factor V deficiency. A careful evaluation of each case will allow the team to categorize the risk and operate safely, minimizing the incidence of intraoperative and postoperative complications. If necessary, the oral-maxillofacial surgeon can choose to do so in collaboration with the hematologist on a case-by-case basis. PATIENTS AND METHODS: The present retrospective study included 5 patients with mild congenital factor V deficiency who had undergone at least 1 dental extraction. Mouth rinse with tranexamic acid, nonresorbable sutures, and gelatin sponge packed in the alveolar socket were used to obtain hemostasis. No systemic therapies, such as fresh frozen plasma, platelet concentrate, or recombinant activated factor VII, were administered. RESULTS: Twenty-five teeth were extracted. The factor V plasma levels ranged from 14.1 to 22.4%. Local antihemorrhagic treatments resulted in good hemostasis. No hemorrhagic complications or intraoperative or postoperative major bleeding was observed. CONCLUSIONS: Dental extractions appear to be safe procedures for patients with mild factor V deficiency when a bleeding risk assessment has been performed in conjunction with a hematologist and an appropriate treatment protocol is followed. Our treatment protocol was found to be effective and well tolerated by all the patients.

The Effects of a Mandibular Overdenture on Edentulous Patients' Quality of Life: A Clinical Study.

Edentulous patients' quality of life can be greatly diminished by the use of a badly fitting removable prosthesis, as many aspects of social life become notably impaired. The object of this study was to evaluate if treating these patients with a two implants mandibular overdenture could improve their quality of life as measured with the Italian version of the OHIP-14 (Oral Health Impact Profile). Edentulous patients, in good clinical condition, were selected. Two implants were placed following the recommended guidelines and three months after new mandibular dentures were manufactured, implants were uncovered and connected to the prosthesis using LOCATOR abutments. OHIP-14 was measured at baseline, one month after delivery and one year after delivery. An improvement was observed even after one month (with a mean reduction of 17 points in OHIP) and that improvement appeared to be stable at the one-year follow-up. Mandibular overdentures can improve a patient's quality of life when compared to a tissue-supported removable complete denture, as long as the patient is subjected to an appropriate follow-up as the retentive rings of the attachment can deteriorate even after two years and lose a great deal of retentive capabilities.

The Effect of Hyperlipidemia on Peri-implant Health: A Clinical and Radiographical Prospective Study.

High levels of cholesterol and triglycerides may have a negative effect on the immune system and bone health, leading to lower bone mineral density, an increased risk of osteoporosis, and bone fractures, and could therefore also be related to a significant worsening of peri-implant health. The purpose of the following study was to evaluate whether the altered lipid profile in patients who undergo implant insertion surgery represents a prognostic factor capable of influencing clinical outcomes. This prospective observational study was conducted on 93 subjects; patients were required to have taken blood tests to obtain triglycerides (TG), total cholesterol, low-density lipoprotein (LDL), and high-density lipoprotein (HDL) levels prior to the surgical procedure to classify them according to current American Heart Association guidelines. The outcomes considered were marginal bone loss (MBL) 3 years after implant placement, full-mouth plaque score (FMPS), and full-mouth bleeding score (FMBS) 3 years after surgery. A statistically significant correlation was found between hypertriglyceridemia and MBL as well as between total cholesterol and MBL. There is no statistically significant correlation between the variables analyzed and the secondary outcomes 3 years after implant placement. Peri-implant marginal bone loss may be influenced by hyperlipidemia. However, further studies are needed, with larger samples and more extensive follow-ups, to confirm these results.

Hard and soft tissue evaluation of alveolar ridge preservation compared to spontaneous healing: a retrospective clinical and volumetric analysis.

PURPOSE: The remodeling process following tooth extraction can be observed as horizontal and vertical bone reduction of the alveolar ridge. Preservation procedures such as alveolar ridge preservation (ARP) aim to maintain the 3D volume of the extraction site. This retrospective study analyzed differences in the hard and soft tissue changes in patients treated with either spontaneous healing or ARP. METHODS: After tooth extraction, the patients were treated either by spontaneous socket healing (SH group) or with ARP using a xenograft and a resorbable membrane (ARP group). One week before and 6 months after extraction, the patients underwent cone beam computed tomography. A volumetric analysis was performed by superimposing the digital models of the two time points. Intraoral radiography was performed after implant placement, upon prosthesis delivery, and at 1-year post-treatment. An esthetic assessment was conducted using the Pink Esthetic Score (PES). The patients' overall satisfaction with the implant restoration was investigated at 12 months. RESULTS: Intragroup comparisons revealed significant differences between baseline and the 6-month follow-up in both groups at the measured locations (1 mm, 3 mm, and 5 mm below the most coronal aspect of the alveolar ridge) showing a reduction of the horizontal width (P < 0.05). Additionally, after treatment, the horizontal width at 1 mm was significantly different in the SH and ARP groups (P < 0.001), with mean changes of 2.03 ± 0.54 mm and 0.86 ± 0.49 mm, respectively. ARP was associated with an increased PES (11.6 ± 2.2) and a reduction in patients requiring additional grafting procedures in subsequent treatment phases (9% vs 26%; P = 0.11). CONCLUSIONS: In both groups, significant horizontal and vertical bone loss was observed after the extraction. ARP can reduce linear and volumetric shrinkage of the alveolar ridge, leading to improved outcomes. It can also simplify implant restoration.

Volumetric Evaluations of Full-Arch Implant Supported Restorations and Their Role on Patients' Quality of Life: A Mixed-Model Analysis.

Introduction: Full-arch, implant-supported hybrid restorations, employing tilted implants, can offer an efficient way of treating edentulous patients. Several factors, such as the timing of implant placement and the inclination of the fixture, can have a detrimental effect on their stability. This retrospective study is aimed at discerning the role played by those factors. Materials and Methods: Patients treated with full-arch, implant supported restorations were selected for this study; cone-beam computed tomography (CBCT) images, taken 3 months and 3 years after delivery of the final restoration, as well as peri-implant values, were obtained and compared; bone loss was measured on four sites for each implant and then averaged. These patients were recalled, and the OHIP-5 questionnaire was administered. Results: 21 patients, with a mean age of 53 years, were included in the present analysis. 108 implants were placed, and 25 Toronto prostheses were delivered. According to a mixed-model analysis, tilted implants (0.51, p < 0.001) had a higher rate of bone loss, while implants placed in a healed ridge suffered less bone loss than immediate implants (-0.21, p < 0.001). Patient-level variables have a significant effect on this variable, as implants coming from the same subject share a similar risk of bone loss. The mean response to the self-administered OHIP-5 questionnaire was 1.53 ± 0.29; other variables did not have a statistically significant effect on this outcome. Discussion/Conclusions. The results of the present study show that Toronto bridges prostheses are an efficient procedure for treating edentulous patients, as their oral-related quality of life is reported as satisfactory even 7 years after delivery of the restoration. Tilted and immediate implants are more at risk of bone loss. Implants coming from the same subject share a similar risk of bone loss.

Implant Placement with Simultaneous Guided Bone Regeneration Using Advanced Platelet-Rich Fibrin and a Deproteinized Bovine Bone Mineral: A 2-Year Retrospective and Comparative Study.

A lack of bone volume may compromise a correct three-dimensional implant placement. This study was designed to evaluate the clinical and radiographic outcomes of simultaneous horizontal guided bone regeneration (GBR) performed using autogenous bone or blood-derived products mixed with a bone xenograft. The study population consisted of patients operated on using one of two clinical protocols for GBR: group A, which used autogenous bone mixed with a bone xenograft, and group B, which used advanced platelet-rich fibrin (A-PRF) mixed with a bone xenograft. The primary outcome was the clinical gain in the peri-implant defect. The secondary outcomes included an analysis of the postoperative healing, periodontal parameters, marginal bone loss, and occurrence of adverse events. All of the surgeries were carried out successfully. One patient in each group experienced a case of early implant loss, and three patients (one in group A and two in group B) presented biologic complications. The mean peri-implant vertical defect heights at baseline in group A and group B were 3.6 ± 0.9 mm and 4 ± 1.5 mm, respectively (P = .382). No statistically significant differences in the mean residual defect heights (P = .521) or in the postoperative wound healing (P = .611) were observed. Stable peri-implant marginal bone levels were recorded after loading in both groups. The use of A-PRF combined with a particulate bone xenograft and covered with a fixed collagen membrane may provide clinical results similar to those obtained via autogenous bone mixed with bone xenograft.

Clinical Comparison of Diode Laser Assisted "v-Shape Frenectomy" and Conventional Surgical Method as Treatment of Ankyloglossia.

(1) Background: Ankyloglossia, or tongue-tie is a condition, in which the tip of tongue cannot protrude beyond the lower incisor teeth because of short frenulum linguae, often containing scar tissue. Limitations of movement are the most important clinical symptoms of this condition, together with feeding, speech, and mechanical problems. (2) Methods: the present study included two groups of patients (group A and group B) including, respectively, 29 and 32 patients (61 patients total), aged from 8 to 12 and presenting ankyloglossia classified according to the Kotlow's classification. The patients in group A underwent a common surgical procedure. For the patients of group B, a diode laser device (K2 mobile laser, Dentium, Korea) with a micro-pulsed wavelength of 980 ± 10 nm and power of 1.2 watts was used. The post-surgical discomfort of the patients (recording the pain perceived immediately after the end of the anesthesia and during the following week, using the Numeric Rating Scale (NRS) system) and healing characteristics (recorded using the Early Wound Healing Score or EHS) were evaluated. (3) Results: The results shows that the pain in the patients who underwent laser-assisted frenectomy is significantly reduced (p < 0.001) when compared to those who underwent conventional surgical frenectomy, both immediately after surgery (with a reduction in the average NRS of 80.6%) and after the first week (with a reduction in the average NRS of 86.58%). Additionally, in the same patients, an augmentation in the average value of the EHS of 45% was recorded, highlighting significantly (p < 0.001) better quality in the healing of the wound within the 24 h after surgery. Moreover, other advantages observed in the use of laser assisted-frenectomy are the absence of bleeding and, consequently, a clear operative field; no need to use sutures; no need to take painkillers or antibiotics after surgery; and having a faster recovery and less time needed to perform the operation. (4) Conclusions: within the limits of the present study, it seems possible to assert that the laser frenectomy performed using the v-shape technique presents a series of advantages if compared to the conventional surgical method.

The effect of soft tissue augmentation on the clinical and radiographical outcomes following immediate implant placement and provisionalization: a systematic review and meta-analysis.

BACKGROUND: Nowadays, due to the esthetic and social demands of patients, conventional staged protocols seem to be increasingly replaced by faster, one-step protocols. The purpose of the present systematic review is to assess the peri-implant soft tissue changes after immediate implant placement and provisionalization (IIPP) comparing patients treated with or without a sub-epithelial connective tissue graft (SCTG) when replacing a single tooth in the esthetic region. METHODS: The present systematic review was written following the PRISMA checklist. Immediate implants placed with a connective tissue graft and without one were compared. The researched primary outcomes were the mid-buccal mucosa level (MBML) facial soft tissue thickness (FSTT) and marginal bone loss (MBL). The weighted mean differences (WMD) were estimated for all three outcomes. RESULTS: The change in the mid-buccal mucosa level in the intervention group was significantly higher (WMD 0.54; 95% CI 0.33-0.75), with no indication of heterogeneity (I2 = 16%). The facial soft tissue thickness increased significantly in the intervention group (WMD 0.79; 95% CI 0.37-1.22). The marginal bone loss was significantly higher in the control group (WMD 0.13; 95% CI 0.07-0.18), with no indication of heterogeneity (I2 = 0%). CONCLUSIONS: The results of the meta-analyses showed a statistically significant reduced change of the marginal bone loss and vestibular recession, as well as higher soft tissue thickness, when a graft was used. The included studies had a short observation time; therefore, studies with longer follow-ups are needed to confirm these findings.

Influence of Immediate Implant Placement and Provisionalization with or without Soft Tissue Augmentation on Hard and Soft Tissues in the Esthetic Zone: A One-Year Retrospective Study.

The purpose of this clinical research was to evaluate peri-implant marginal changes around immediate implants placed either with the application of SCTG or XCM or without soft tissue grafting. A total of 48 patients requiring a single implant-supported restoration in the anterior jaw were selected for inclusion. Three surgical procedures were performed, as follows: type 1 implant with subepithelial connective tissue graft (SCTG), type 1 implant with xenogenic collagen matrix (XCM), and type 1 implant without soft tissue augmentation (NG) (control group). The marginal change of peri-implant soft tissue, facial soft tissue thickness (FSTT), peri-implant health status, esthetics, and patient satisfaction were assessed at one year after surgery. All of the placed implants showed a survival rate of 100%. No significant differences in FSTT were recorded between the SCTG group and the XCM group after treatment (P > 0.05), while the NG group presented a significant difference (P < 0.05). Patients in the NG group lost significantly more in the buccal marginal level than did patients in the SCTG group and those in the XCM group (P < 0.05). The favourable success rate recorded in all groups confirmed immediate tooth replacement as a choice of treatment for a missing anterior single tooth. The NG group presented significant changes of FSTT and buccal marginal level, while XCM constituted a viable alternative to SCTG.

The Effect of Controlled Diabetes and Hyperglycemia on Implant Placement with Simultaneous Horizontal Guided Bone Regeneration: A Clinical Retrospective Analysis.

Diabetes represents a challenge in implant therapy because hyperglycemia may negatively affect bone regeneration, directly compromising clinical outcomes and increasing clinical failures. The aim of this retrospective study is to analyse the prognostic significance of HbA1c levels in patients undergoing implant placement associated with horizontal guided bone regeneration. Thirty-four patients were divided into 3 groups according to their HbA1c levels: nondiabetic normoglycemic patients (HbA1c < 5.7%), nondiabetic hyperglycemic patients (HbA1c < 6.5%), and controlled diabetic patients (HbA1c < 7%). Primary outcomes were dimensional changes in height (VDH) and width (DW) of the peri-implant defect. Secondary outcomes were evaluations of periodontal parameters of adjacent tooth sites, wound healing, marginal bone loss (MBL), and survival and success rates. At T 1 (6 months), mean VDH values in groups 1, 2, and 3 were, respectively, 0.07, 0.5, and 0.25 mm. Mean DW values in those same groups were, respectively, 0.07, 0.38, and 0.33 mm. HbA1c levels were not statistically related to VDH and DW values at T 1. No statistically significant differences were observed in MBL between groups (p = 0.230). Implant survival and success rates were, respectively, 98% and 96%. Simultaneous guided bone regeneration is a feasible procedure for the treatment of horizontal bone deficiencies in controlled diabetic patients.

Patient Satisfaction with Implant-Supported Monolithic and Partially Veneered Zirconia Restorations.

The digital workflow and the application of Computer-Aided Manufacturing (CAM) to prosthodontics present the clinician with the possibility of adopting new materials that confer several advantages. Especially in the case of zirconia, these innovations have profoundly changed daily practice. This paper compares the satisfaction and perception of patients who received implant-supported single crowns (SC) and fixed partial dentures (FPD) made from zirconia, either monolithic or partially veneered, after 3 years of follow-up; the success and survival rate of these restorations were also measured. Forty patients, who had been previously treated with implant-supported SC or FPD, either monolithic or partially veneered, and submitted to a yearly maintenance program, were recalled 3 years after their treatment and requested to complete an 8-question questionnaire regarding their perceptions of the treatment. Any mechanical or biological complication that had occurred from the time of delivery was also recorded. Patients that experienced ≥1 complication were less likely to be prone to repeat the treatment. The 3-year success rate was 92.6% for monolithic restoration and 92.3% for partially veneered restoration, while the survival rate was 100% for both restorations. The 3-year follow-up found that monolithic and partially veneered zirconia restorations are both well-accepted treatment options, and patients preferred the veneered restorations (0.76, p < 0.05) from an aesthetic point of view. According to our results, monolithic and veneered zirconia restorations are both reliable treatment options and are both equally accepted by patients.

Technical and Biological Complications of Screw-Retained (CAD/CAM) Monolithic and Partial Veneer Zirconia for Fixed Dental Prostheses on Posterior Implants Using a Digital Workflow: A 3-Year Cross-Sectional Retrospective Study.

OBJECTIVE: The introduction of CAD/CAM and the development of zirconia-based restorations have allowed clinicians to use less expensive materials and faster manufacturing procedures. The purpose of the study was to analyze the differences, in terms of mechanical and biological complication, in multiunit zirconia fixed dental prosthesis (FPDs) on posterior implants produced using a digital workflow. Method and Materials. This study was a retrospective investigation, and patients treated with screw-retained monolithic or partial veneer FPDs on dental implants were selected. Periapical radiographs were taken at baseline and at the 3-year follow-up. Complications were recorded and classified as technical and biological ones. RESULTS: The study population included 25 patients. The occlusal and interproximal corrections were not clinically significant. In the study sample, the survival rate and success rate of the FPDs after 3 years were 100% and 96%, respectively. One implant failed immediately after placement. CONCLUSION: Monolithic zirconia FPDs and partial veneer FPDs showed a 100% survival rate, presenting an interesting alternative to metal ceramic restorations. The partial veneer FPDs had a higher technical complication rate than the monolithic FPDs; however, no statistically significant difference was found.

A novel surgical approach to impacted mandibular third molars to reduce the risk of paresthesia: a case series.

PURPOSE: Extraction of impacted mandibular third molars (M3s) may cause temporary or permanent neurosensorial disturbances of the inferior alveolar nerve (IAN). Although the incidence of this complication is low, a great range of variability has been reported in the literature. Several methods to reduce or eliminate this complication have been proposed, such as orthodontic-assisted extraction, extraction of the second molar, or intentional odontoectomy. The purpose of this series of cases is to present a novel approach for a riskless extraction of impacted mandibular M3s in contact with the IAN. MATERIALS AND METHODS: Nine consecutive patients (4 male and 5 female; mean age 24.9 years, range 18-43 years) required the extraction of 10 horizontally or mesioangular impacted mandibular M3s. In all cases the M3 was in contact with the IAN with a high risk of nerve injury. A staged approached was proposed and accepted by the patients. This approach consisted in the surgical removal of the mesial portion of the anatomic crown to create adequate space for mesial M3 migration. After the migration of the M3 had taken place, the extraction could then be accomplished in a second surgical session minimizing neurological risks. RESULTS: All M3s moved mesially within 6 months (mean 174.1 days, range 92-354 days) and could be successfully removed without any neurological consequences. CONCLUSION: This technique may be considered as an alternative approach to the extraction of horizontally or mesioangular impacted M3s in proximity to the IAN.

The impact of the COVID-19 infection in dentistry.

IMPACT STATEMENT: Dentists have always been taught how to protect themselves and their patients from potential blood-borne pathogens, but the Coronavirus pandemic has brought a new unprecedented challenge to the world of dentistry; we therefore reviewed the literature to provide suggestions on how to accordingly change dental practice prevention.

A comparative scanning electron microscopy study between the effect of an ultrasonic scaler, reciprocating handpiece, and combined approach on the root surface topography in subgingival debridement.

OBJECTIVE: This study aimed to analyze the effectiveness of root-shape inserts mounted on a reciprocating handpiece during the procedure of root surface debridement (RSD) on extracted teeth. Three different approaches were compared: ultrasonic scaling, employment of root-shape inserts mounted on a reciprocating handpiece, and a combination of both. MATERIALS AND METHODS: A total of 51 extracted teeth were divided into three groups. The first group was instrumented with an ultrasonic scaler, the second group with flexible root-shape inserts mounted on a reciprocating handpiece (grain size 40, 15, and 4 µm), whereas the final group underwent a combination of both approaches. The time required for the instrumentation was taken. The specimens were subjected to optical and scanning electron microscopy (SEM), and the photographs were evaluated by three examiners who were blinded to the study. The parameters included were: SEM roughness index (SRI) for the roughness calculation, remaining calculus Index (RCI) to evaluate the residual calculus deposits, and loss of tooth substance index (LTSI) to evaluate the loss of tooth substance caused by instrumentation. RESULT: The results revealed that the time taken for the instrumentation was on average longer when the root-shape inserts were employed alone, meanwhile the combined approach did not show significant difference in comparison with the ultrasonic scaling. The lower average RCI was obtained with a combined approach. The use of root-shape inserts seems to cause a moderate increase in LTSI, especially in a combined approach, whereas it resulted in a better average SRI. CONCLUSION: The employment of root-shape inserts seems to be effective in the RSD for its ability to obtain a smooth and calculus-free instrumented surface, especially when used in combination with an ultrasonic scaler, and their use can so represent a valid approach to be tested in further in vivo studies.

The Effectiveness of Chlorhexidine and Air Polishing System in the Treatment of Candida albicans Infected Dental Implants: An Experimental In Vitro Study.

Background: Peri-implantitis is an inflammatory disease with an increasing diffusion rate which can affect the long-term survival of a prosthetic rehabilitation. The present study focused on the decontaminating efficacy of chlorhexidine and air polishing system with sodium bicarbonate powder against Candida albicans, a microorganism which seems to have a superinfecting opportunistic role in the pathology. The aim of the authors was to investigate and compare the effectiveness of these treatments, commonly used in clinical practice. Methods: An in vitro study was conducted to analyze the effects of two widely used therapeutic aids for the disinfection of affected titanium implants: chlorhexidine (CHX) and air polishing with sodium bicarbonate powder (P). A qualitative and quantitative comparative analysis of the residual biofilm was carried out using a colorimetric assay (XTT) and scanning electron microscopy (SEM) observation. The experiment was conducted both on machined titanium surfaces and on rough sandblasted ones with the aim of bringing out differences in the therapeutic outcomes concerning the superficial texture of the implant. The null hypothesis was that no difference could be detected between the samples, regarding both the treatments performed and the nano-structural features of titanium. Results: The best results (on both types of implant surfaces) were obtained when combining the use of chlorhexidine and air polishing (C + P). A linear decrease in the optical density (OD) values recorded at three different time points (30 s, 1 min, 5 min) was also observed passing from the first to the last one. When observed under scanning electron microscope rough surfaces showed an extensive and highly structured biofilm, more complex if compared to the one encountered when analyzing machined implants. Conclusions: the present pilot study showed that rough surfaces can promote fungal adhesion and eventually hinder the outcome of a decontaminating treatment. For this purpose, the physio-chemical technique is always more efficient if compared to a single-technique approach regardless of the surface characteristics.