Evaluation of the presence of gingivitis as confounding factor in assessing inflammatory status in serum and saliva of dogs with diabetes mellitus.

The aim of this study was to evaluate the changes in the serum and salivary inflammatory markers induced by Diabetes mellitus (DM) in dogs and to assess the possible confounding effect of gingivitis. A panel of 13 cytokines was measured in the serum and saliva of dogs diagnosed with DM and compared with healthy dogs without gingivitis (control group 1; CG1) and dogs with gingivitis but otherwise healthy (control group 2; CG2). The results of the present study showed statistically significantly higher levels of IL-8, KC-like and MCP1 in the serum of dogs with DM compared to CG1 dogs. In the case of saliva, the DM group presented statistically higher GM-CSF, IL6, IL15, and MCP1 levels compared to CG1, and lower KC-like chemokine compared to CG2. Finally, gingivitis produced changes in saliva, with salivary levels of GM-CSF, IL-6, IL-7, IL-15, IP-10, KC-like, IL-10, IL-18, MCP1, TNFα being statistically significantly higher in the saliva of CG2 dogs compared to CG1. The results of the present study indicate that dogs with DM have altered cytokine levels in serum and saliva compared to healthy dogs. In addition, this study highlights the importance of taking oral health into account when determining cytokines in dogs, as gingivitis can significantly alter their concentrations. .

Development of Bioactive Hybrid Poly(lactic acid)/Poly(methyl methacrylate) (PLA/PMMA) Electrospun Fibers Functionalized with Bioglass Nanoparticles for Bone Tissue Engineering Applications.

Hybrid scaffolds that are based on PLA and PLA/PMMA with 75/25, 50/50, and 25/75 weight ratios and functionalized with 10 wt.% of bioglass nanoparticles (n-BG) were developed using an electrospinning technique with a chloroform/dimethylformamide mixture in a 9:1 ratio for bone tissue engineering applications. Neat PLA and PLA/PMMA hybrid scaffolds were developed successfully through a (CF/DMF) solvent system, obtaining a random fiber deposition that generated a porous structure with pore interconnectivity. However, with the solvent system used, it was not possible to generate fibers in the case of the neat PMMA sample. With the increase in the amount of PMMA in PLA/PMMA ratios, the fiber diameter of hybrid scaffolds decreases, and the defects (beads) in the fiber structure increase; these beads are associated with a nanoparticle agglomeration, that could be related to a low interaction between n-BG and the polymer matrix. The Young's modulus of PLA/PMMA/n-BG decreases by 34 and 80%, indicating more flexible behavior compared to neat PLA. The PLA/PMMA/n-BG scaffolds showed a bioactive property related to the presence of hydroxyapatite crystals in the fiber surface after 28 days of immersion in a Simulated Body Fluids solution (SBF). In addition, the hydrolytic degradation process of PLA/PMMA/n-BG, analyzed after 35 days of immersion in a phosphate-buffered saline solution (PBS), was less than that of the pure PLA. The in vitro analysis using an HBOF-1.19 cell line indicated that the PLA/PMMA/n-BG scaffold showed good cell viability and was able to promote cell proliferation after 7 days. On the other hand, the in vivo biocompatibility evaluated via a subdermal model in BALC male mice corroborated the good behavior of the scaffolds in avoiding the generation of a cytotoxic effect and being able to enhance the healing process, suggesting that the materials are suitable for potential applications in tissue engineering.

Techniques for locating the screw access hole in cement-retained implant-supported prostheses: A systematic review.

STATEMENT OF PROBLEM: Different techniques for retrieving cement-retained implant-supported prostheses have been described to minimize damage to the prostheses. Nevertheless, a classification of the described techniques remains ambiguous. PURPOSE: The purpose of this systematic review was to review and classify the described techniques for recording and locating the screw access hole in cement-retained implant-supported prostheses. MATERIAL AND METHODS: A bibliographic search was completed on MEDLINE/PubMed, Web of Science, Scopus, and Cochrane databases. A manual search was also conducted. The articles that described or evaluated techniques for recording and locating the screw access hole of cement-retained implant-supported prostheses were included. Two investigators independently assessed the quality assessment of the studies using the Revised Cochrane risk of bias tool for randomized trials. A third examiner was consulted to resolve the lack of consensus. RESULTS: A total of 30 articles were included. The different methods were classified according to whether the screw access hole location was registered before or after cementation. The precementation techniques were classified into 4 subgroups: identification marks, photographic records, digital files, and precementation screw access hole location guides. The postcementation techniques were subdivided into 2 subgroups: radiographic records and postcementation screw access hole location guides. CONCLUSIONS: Different techniques have been proposed to facilitate the location of the screw access hole in cement-retained implant-supported restorations. Although the evidence is scarce, studies seem to ascertain that some techniques, such as the use of drilling guides, orientation with cone beam computed tomography images, or holes made in the metal framework, can increase the retrievability of cement-retained implant-supported prostheses and decrease complications in the location of the screw access hole. The proposed classification summarizes precementation and postcementation techniques and provides a tool to decide the most suitable for each specific clinical situation.

Genetic variation in the glucosyltransferase-B gene of Streptococcus mutans and its relationship with caries experience in children from Córdoba, Argentina, and with strains from other countries.

BACKGROUND: Caries is a worldwide distributed oral disease of multifactorial nature, with Streptococcus mutans being the most commonly isolated bacterial agent. The glycosyltransferases of this bacterium would play an essential role in the aetiology and pathogenesis of caries. AIM: We explored how the glucosyltransferase-B (gtf-B) gene variability of S. mutans from children in central Argentina correlated with their caries experience and how these strains were genetically related to those of other countries. DESIGN: Dental examinations were performed on 59 children; dmft and DMFT indexes were calculated. From stimulated saliva, S. mutans was grown and counted (CFU/mL). From bacterial DNA, the gtf-B gene was amplified and sequenced. Alleles were identified and their genealogical relationships established. Clinical, microbiological, and genetic variables were correlated with caries experience. Our sequences were included in a matrix with those from 16 countries (n = 358); genealogical relationships among alleles were obtained. Population genetic analyses were performed for countries with >20 sequences. RESULTS: The mean dmft + DMFT was 6.45. Twenty-two gtf-B alleles were identified here, which showed low genetic differentiation in the network. Caries experience was correlated with CFU/mL, but not with allele variation. Low differentiation was found among the 70 alleles recovered from the 358 sequences and among the countries analyzed. CONCLUSION: In this study, caries experience in children was correlated with the number of CFU/mL of S. mutans but not with the gtf-B gene variability. Combined genetic analyses of worldwide strains support the theory that this bacterium experienced population expansions, probably associated with agriculture development and/or food industrialization.

Facial palsy after embolization with Squid® 12.

Endovascular procedures with liquid embolic agents such as ethylene-vinyl alcohol (EVOH) copolymers are indicated before surgical treatment of cervical paraganglioma. Consequently, these agents are now available as low viscosity formulations, one of which is Squid 12, which are demonstrating superior vascular penetration. Cases of facial paralysis secondary to embolization of cervical vascular lesions with classic embolic agents have been reported in the English literature, however, this complication has not been described with new generation options such as Squid 12.We describe the case of a 43-year-old patient with a left neck carotid paraganglioma. Embolization was performed under general anaesthesia before surgical excision. In the immediate postoperative period, the patient developed total left facial palsy. Since the imaging tests (Computed Tomography (CT) and Magnetic Resonance Imaging (MRI)) and neurological examination showed no involvement of additional cranial nerves (CN), we hypothesise that the main cause of this complication is ischemia of the vasa nervorum of CN VII secondary to embolization. Almost six months later, the patient continues to present total facial paralysis (Grade VI House-Brackmann facial paralysis scale), and palsy of the left CN X and XII as a complication secondary to surgical resection of the paraganglioma.This case is relevant since it is the first clinical case of permanent facial paralysis secondary to embolization with Squid 12.

Incorporating the recovered carbon black produced in an industrial-scale waste tire pyrolysis plant into a natural rubber formulation.

This paper presents the experimental results obtained after incorporating the recovered Carbon Black (rCB) produced in an industrial-scale waste tire pyrolysis plant into a Natural Rubber (NR) formulation. The purpose of this study is to increase the technical knowledge on the use of rCB as a sustainable raw material in the rubber industry. The rCB and virgin Carbon Black (vCB) (ref. N550) under study were characterized using elemental and proximate analyses, X-Ray Fluorescence (XRF), Fourier Transform Infrared (FTIR) spectroscopy, and Scanning Electron Microscopy (SEM) were used, and different measures, including the Brunauer-Emmett-Teller (BET) surface area (SBET), particle size distribution (PSD), specific gravity, and pH, were estimated. The effect of rCB incorporation on the rheological, thermal, structural, and mechanical properties of the NR composites was assessed and compared to those obtained with vCB alone. The NR composites were prepared using different loads of vCB (20, 30, 40, and 50 phr), which was also replaced with rCB at different proportions (0, 50, and 100%). According to the characterization results, rCB offers lower reinforcement properties than vCB, which is attributable to its higher volatile matter and ash contents, higher apparent PSD, lower presence of acidic functional groups, and lower SBET. Despite this, interesting performances can be achieved when rCB is partially incorporated into the formulations or by increasing its load in the composites. For instance, when 50% of vCB was replaced with rCB, the values of the aforementioned properties were found to be between those obtained with the NR composites prepared with vCB and rCB. In addition, when increasing the rCB loading, some properties matched the behavior exhibited by vCB alone, thus compensating for the low reinforcement properties of rCB. These results are expected to provide an important impetus to move towards circular economy strategies having very positive impacts from the sustainable perspective.

Improvement of Impact Strength of Polylactide Blends with a Thermoplastic Elastomer Compatibilized with Biobased Maleinized Linseed Oil for Applications in Rigid Packaging.

This research work reports the potential of maleinized linseed oil (MLO) as biobased compatibilizer in polylactide (PLA) and a thermoplastic elastomer, namely, polystyrene-b-(ethylene-ran-butylene)-b-styrene (SEBS) blends (PLA/SEBS), with improved impact strength for the packaging industry. The effects of MLO are compared with a conventional polystyrene-b-poly(ethylene-ran-butylene)-b-polystyrene-graft-maleic anhydride terpolymer (SEBS-g-MA) since it is widely used in these blends. Uncompatibilized and compatibilized PLA/SEBS blends can be manufactured by extrusion and then shaped into standard samples for further characterization by mechanical, thermal, morphological, dynamical-mechanical, wetting and colour standard tests. The obtained results indicate that the uncompatibilized PLA/SEBS blend containing 20 wt.% SEBS gives improved toughness (4.8 kJ/m2) compared to neat PLA (1.3 kJ/m2). Nevertheless, the same blend compatibilized with MLO leads to an increase in impact strength up to 6.1 kJ/m2, thus giving evidence of the potential of MLO to compete with other petroleum-derived compatibilizers to obtain tough PLA formulations. MLO also provides increased ductile properties, since neat PLA is a brittle polymer with an elongation at break of 7.4%, while its blend with 20 wt.% SEBS and MLO as compatibilizer offers an elongation at break of 50.2%, much higher than that provided by typical SEBS-g-MA compatibilizer (10.1%). MLO provides a slight decrease (about 3 °C lower) in the glass transition temperature (Tg) of the PLA-rich phase, thus showing some plasticization effects. Although MLO addition leads to some yellowing due to its intrinsic yellow colour, this can contribute to serving as a UV light barrier with interesting applications in the packaging industry. Therefore, MLO represents a cost-effective and sustainable solution to the use of conventional petroleum-derived compatibilizers.

Intravenous dextrose versus ondansetron for prevention of postoperative vomiting in children: a randomized non-inferiority trial.

BACKGROUND: Postoperative vomiting (POV) in children is frequent. Dextrose-containing intravenous fluids in the perioperative period have shown improvement of POV in adults. Similar studies have not been done in children. AIM: The primary purpose was to study the efficacy of intraoperative intravenous dextrose for antiemetic prophylaxis in children undergoing ambulatory surgery. METHODS: A non-inferiority randomized clinical trial of healthy children (three to nine years old) undergoing ambulatory dental surgery was conducted. The control group received dexamethasone (0.15 mg·kg-1 iv) and ondansetron (0.05 mg·kg-1 iv); the intervention group received dexamethasone (0.15 mg·kg-1 iv) and intravenous 5% dextrose in 0.9% normal saline according to a weight-based maintenance rate. The primary outcome was POV in the postanesthetic care unit (PACU) within two hr after surgery. Secondary outcomes included POV within 24 hr from discharge and unplanned hospital admission. A non-inferiority analysis was conducted on the primary outcome using an absolute risk difference of 7.5% as the non-inferiority margin. RESULTS: Data from 290 patients were analyzed. Demographics and intraoperative anesthetic management were similar between groups. Vomiting in the PACU occurred in 7.6% and 3.5% of the dextrose and ondansetron groups, respectively, with a risk difference of 4.2% (95% confidence interval [CI], -1.0 to 9.5). Given that the upper limit of the 95% CI exceeded our non-inferiority margin, non-inferiority of dextrose compared with ondansetron was not shown. CONCLUSION: These results do not support the use of intravenous dextrose as a satisfactory alternative to ondansetron to prevent POV in ambulatory pediatric dental surgery patients. TRIAL REGISTRATION: www.clinicaltrials.gov (NCT01912807); registered 18 July 2013.

RéSUMé: CONTEXTE: Les vomissements postopératoires (VPO) sont fréquents chez l'enfant. Il a été démontré qu'en période périopératoire, les solutés intraveineux contenant du dextrose entraînaient une diminution des VPO chez l'adulte, mais des études similaires n'ont pas été réalisées auprès de populations pédiatriques. OBJECTIF: L'objectif principal était d'évaluer l'efficacité du dextrose intraveineux peropératoire en tant que prophylaxie antiémétique chez les enfants subissant une chirurgie ambulatoire. MéTHODE: Une étude clinique randomisée de non-infériorité a été réalisée auprès d'enfants en bonne santé (de trois à neuf ans) devant subir une chirurgie dentaire en ambulatoire. Le groupe témoin a reçu de la dexaméthasone (0,15 mg·kg−1 iv) et de l'ondansétron (0,05 mg·kg−1 iv); le groupe intervention a reçu de la dexaméthasone (0,15 mg·kg−1 iv) et du dextrose intraveineux 5 % dans une solution de normal salin 0,9 % selon une échelle basée sur le poids. Le critère d'évaluation principal était la présence de VPO en salle de réveil au cours des deux heures suivant la chirurgie. Les critères d'évaluation secondaires comprenaient les VPO au cours des 24 h suivant le congé et une admission non planifiée à l'hôpital. L'analyse de non-infériorité a été réalisée pour le critère d'évaluation primaire en se fondant sur une différence de risque absolu de 7,5 % comme marge de non-infériorité. RéSULTATS: Les données de 290 patients ont été analysées. Les données démographiques et de prise en charge anesthésique peropératoire étaient semblables entre les deux groupes. Des vomissements sont survenus en salle de réveil chez 7,6 % et 3,5 % des groupes dextrose et ondansétron, respectivement, avec une différence de risque de 4,2 % (intervalle de confiance [IC] 95 %, -1,0 à 9,5). Étant donné que la limite supérieure de l'IC 95 % excédait notre marge de non-infériorité, la non-infériorité du dextrose comparativement à l'ondansétron n'a pas été démontrée. CONCLUSION: Ces résultats n'appuient pas l'utilisation de dextrose intraveineux en tant qu'alternative à l'ondansétron afin de prévenir les VPO chez les patients pédiatriques de chirurgie dentaire ambulatoire. ENREGISTREMENT DE L'éTUDE: www. CLINICALTRIALS: gov (NCT01912807); enregistrée le 18 juillet 2013.

Endoscopic ultrasound-guided percutaneous endoscopic gastrostomy.

Percutaneous endoscopic gastrostomy (PEG) is the method of choice for feeding and nutritional support in patients with a normal gastrointestinal function who require long-term enteral nutrition. We report our experience regarding an alternative endoscopic ultrasound (EUS)-guided PEG technique. A retrospective clinical experience case series study was conducted from January 2019 to November 2019 at a tertiary center. Adult patients deemed unfit for conventional PEG due to absence of transillumination or previous gastric surgery were enrolled. An EUS target was created by filling a glove with saline and placing it in the abdomen. EUS was performed and the target identified from the stomach. The abdominal wall was punctured from the stomach and a guidewire was advanced. The guidewire was knotted to a string, which was passed into the stomach and drawn back through the mouth. The procedure was continued following the traditional technique. Four patients underwent EUS-PEG in our center during the study period. Mean age was 65 years and 50% were male. Two patients (50%) had a body mass index over 30. PEG indications were tongue malignancies (50%), cerebrovascular disease (25%) and dementia (25%). One patient had a Roux-en-Y gastric bypass and percutaneous endoscopic jejunostomy was performed. Technical success rate was 100% and no complications occurred. This case series shows that the EUS-guided PEG technique is a safe alternative in patients deemed unfit for conventional PEG.

pH-Sensitive N,N-Dimethylalkane-1-amine N-Oxides in DNA Delivery: From Structure to Transfection Efficiency.

pH-sensitive liposomes composed of homologues of series of N,N-dimethylalkane-1-amine N-oxides (CnNO, n = 8-18, where n is the number of carbon atoms in the alkyl substituent) and neutral phospholipid dioleoylphosphatidylethanolamine (DOPE) were prepared at two molar ratios (CnNO/DOPE = 0.4:1 and 1:1) and tested for their in vitro transfection activity. Several techniques (SAXS/WAXS, UV-vis, zeta potential measurements, confocal microscopy) were applied to characterize the system in an effort to unravel the relationship among the transfection efficiency, structure, and composition of the lipoplexes. The transfection efficiency of CnNO/DOPE for plasmid DNA in U2OS cells follows a quasi-parabolic dependence on CnNO's alkyl substituent length with a maximum at n = 16. The transfection efficiency of CnNO/DOPE (n = 12-18) lipoplexes was found to be higher than that of commercially available Lipofectamine 2000. C16NO/DOPE also positively transfected HEK 293T and HeLa cells. Small-angle X-ray scattering (SAXS) shows large structural diversity depending on the complex's composition and pH. Transfection efficiencies mediated by two structures, either a condensed lamellar (Lαc) or epitaxially connected Lαc and a condensed inverted hexagonal (HIIc) phase (Lαc & HIIc), were found to be very similar. The change in pH from acidic to neutral induces phase transition Lαc & HIIc → QII + Lα, with cubic phase QII of the Pn3m space group. QII detected in lipoplexes of most efficient composition CnNO/DOPE (n = 16 and 18) facilitates DNA release and promotes its internalization in the cell.

Measurement of urea and creatinine in saliva of dogs: a pilot study.

BACKGROUND: Urea and creatinine in saliva have been reported to be possible markers of chronic kidney disease (CKD) in humans. The aim of this study was to assess if urea and creatinine could be measured in canine saliva, and to evaluate their possible changes in situations of CKD. RESULTS: The spectrophotometric assays for urea and creatinine measurements in saliva of dogs showed intra- and inter-assay imprecision lower than 12% and coefficients of correlation close to 1 in linearity under dilution tests. Healthy dogs showed median salivary concentrations of urea of 39.6 mg/dL and creatinine of 0.30 mg/dL, whereas dogs with CKD showed median salivary urea of 270.1 mg/dL and creatinine of 1.86 mg/dL. Positive high correlations were found between saliva and serum activities of the two analytes (urea, r = 0.909; P < 0.001; creatinine, r = 0.819; P < 0.001). CONCLUSIONS: Urea and creatinine concentrations can be measured in canine saliva with commercially available spectrophotometric assays. Both analytes showed higher values in saliva of dogs with CKD compared with healthy dogs and their values were highly correlated with those in serum in our study conditions.

Parylene scaffold for cartilage lesion.

Evaluate parylene scaffold feasibility in cartilage lesion treatment, introducing a novel paradigm combining a reparative and superficial reconstructive procedure. Fifteen rabbits were used. All animals had both knees operated and the same osteochondral lesion model was created bilaterally. The parylene scaffold was implanted in the right knee, and the left knee of the same animal was used as control. The animals were euthanized at different time points after surgery: four animals at three weeks, three animals at six weeks, four animals at nine weeks, and four animals at 12 weeks. Specimens were analyzed by International Cartilage Repair Society (ICRS) macroscopic evaluation, modified Pineda histologic evaluation of cartilage repair, and collagen II immunostaining. Parylene knees were compared to its matched contra-lateral control knees of the same animal using the Wilcoxon matched-pairs signed rank. ICRS mean ± SD values for parylene versus control, three, six, nine and twelve weeks, respectively: 7.83 ± 1.85 versus 4.42 ± 1.08, p = 0.0005; 10.17 ± 1.17 versus 6.83 ± 1.17, p = 0.03; 10.89 ± 0.60 versus 7.33 ± 2.18, p = 0.007; 10.67 ± 0.78 versus 7.83 ± 3.40, p = 0.03. Modified Pineda mean ± SD values for parylene versus control, six, nine and twelve weeks, respectively: 3.37 ± 0.87 versus 6.94 ± 1.7, p < 0.0001; 5.73 ± 2.05 versus 6.41 ± 1.7, p = 0.007; 3.06 ± 1.61 versus 6.52 ± 1.51, p < 0.0001. No inflammation was seen. Parylene implanted knees demonstrated higher collagen II expression via immunostaining in comparison to the control knees. Parylene scaffolds are a feasible option for cartilage lesion treatment and the combination of a reparative to a superficial reconstructive procedure using parylene scaffolds led to better results than the reparative procedure alone.

Exercise Increases the Dynamics of Diurnal Cortisol Secretion and Executive Function in People With Amnestic Mild Cognitive Impairment.

Regular physical activity is protective against, and beneficial for, mild cognitive impairment (MCI), dementia, and Alzheimer's disease. The mechanisms underlying these benefits remain unknown although it has been suggested that exercise-induced changes in the circadian pattern of cortisol secretion may be implicated. Fitness, salivary cortisol levels (0 and 30 min postawakening, midday, 5 p.m., and 9 p.m.), and cognitive function were determined in a group of amnestic MCI patients (n = 39) before and after a three-month exercise program (n = 19) or usual care (n = 20). At baseline, fitness measures were positively correlated with peak levels of cortisol and a greater fall in cortisol concentration from peak levels to midday. The exercise intervention successfully increased fitness and resulted in a greater fall in cortisol concentration from peak to midday, compared with the control group. The exercise intervention enhanced indices of executive function, although memory, mood, and functionality were not affected.

Drug-Coated Balloon Angioplasty vs Plain Balloon Angioplasty in patients with coronary In-Stent Restenosis: A systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: In-stent restenosis (ISR) remains a significant challenge in interventional cardiology despite advancements in stent technology. Drug-coated balloons (DCBs), which deliver antiproliferative agents directly to the vessel wall, have emerged as a promising alternative to plain balloon angioplasty for ISR treatment. This meta-analysis evaluates the efficacy of DCBs compared to plain balloon angioplasty in patients with coronary ISR. METHODS: A comprehensive search of PubMed and Embase was conducted on June 27, 2024. The search identified randomized controlled trials comparing DCBs and plain balloon angioplasty for ISR treatment. Six trials involving 1,322 patients met the inclusion criteria. Quality was assessed with the Cochrane Risk of Bias tool. Data extraction and statistical analysis were performed using RevMan software, assessing heterogeneity with the I2 statistic and publication bias using funnel plots. RESULTS: The analysis showed that DCBs significantly reduced late in-stent and in-segment luminal loss (P < 0.001) and target lesion revascularization (P = 0.02) compared to plain balloon angioplasty. Major adverse cardiovascular events and the combined endpoint of target lesion revascularization, myocardial infarction, and death also showed highly significant improvements with DCB treatment (P < 0.00001 and P = 0.0002, respectively). However, no significant effect was observed on myocardial infarction and mortality rates. CONCLUSION: DCBs significantly reduce in-stent late luminal loss, target lesion revascularization, and major adverse cardiovascular events compared to plain balloon angioplasty.

Recent Insights Into Native Valve Infective Endocarditis: JACC Focus Seminar 4/4.

This focused review highlights the latest issues in native valve infective endocarditis. Native valve disease moderately increases the risk of developing infective endocarditis. In 2023, new diagnostic criteria were published by the Duke-International Society of Cardiovascular Infectious Diseases group. New pathogens were designated as typical, and findings on computed tomography imaging were included as diagnostic criteria. It is now recognized that a multidisciplinary approach to care is vital, and the role of an "endocarditis team" is highlighted. Recent studies have suggested that a transition from intravenous to oral antibiotics in selected patients may be reasonable, and the role of long-acting antibiotics is discussed. It is also now clear that an aggressive surgical approach can be life-saving in some patients. Finally, results of several recent studies have suggested there is an association between dental and other invasive procedures and an increased risk of developing infective endocarditis. Moreover, data indicate that antibiotic prophylaxis may be effective in some scenarios.

Development of starch-rich thermoplastic polymers based on mango kernel flour and different plasticizers.

This work reports on the development of starch-rich thermoplastic based formulations produced by using mango kernel flour, avoiding the extraction process of starch from mango kernel to produce these materials. Glycerol, sorbitol and urea at 15 wt% are used as plasticizers to obtain thermoplastic starch (TPS) formulations by extrusion and injection-moulding processes. Mechanical results show that sorbitol and urea allowed to obtain samples with tensile strength and elongation at break higher than the glycerol-plasticized sample, achieving values of 2.9 MPa of tensile strength and 42 % of elongation at break at 53 % RH. These results are supported by field emission scanning electron microscopy (FESEM) micrographs, where a limited concentration of voids was observed in the samples with sorbitol and urea, indicating a better interaction between starch and the plasticizers. Thermogravimetric analysis (TGA) shows that urea and sorbitol increase the thermal stability of TPS in comparison to the glycerol-plasticized sample. Differential scanning calorimetry (DSC) and dynamic-mechanical-thermal analysis (DMTA) verify the increase in stiffness of the sorbitol and urea plasticized TPS and also illustrate an increase in the glass transition temperature of both samples in comparison to the glycerol-plasticized sample. Glass transition temperatures of 45 °C were achieved for the sample with sorbitol.

3D Bioprinting of Food Grade Hydrogel Infused with Living Pleurotus ostreatus Mycelium in Non-sterile Conditions.

Mycelium is the root-like network of fungi. Mycelium biocomposites prepared by template replication (molding) can function as environmentally friendly alternatives to conventional polystyrene foams, which are energy- and carbon-intensive to manufacture. Recently, several studies have shown that 3D bioprinting technologies can be used to produce high value functional mycelium products with intricate geometries that are otherwise difficult or impossible to achieve via template replication. A diverse range of nutrients, thickeners, and gelling agents can be combined to produce hydrogels suitable for 3D bioprinting. 3D bioprinting with hydrogel formulations infused with living fungi produces engineered living materials that continue to grow after bioprinting is complete. However, a hydrogel formulation optimized for intricate 3D bioprinting of Pleurotus ostreatus mycelium, which is among the strains most commonly used in mycelium biocomposite fabrication, has yet to be described. Here, we design and evaluate a versatile hydrogel formulation consisting of malt extract (nutrient), carboxymethylcellulose and cornstarch (thickeners), and agar (gelling agent), all of which are easily sourced food grade reagents. We also outline a reproducible workflow to infuse this hydrogel with P. ostreatus liquid culture for 3D bioprinting of intricate structures comprised of living P. ostreatus mycelium and characterize the changes in height and mass as well as hardness of the prints during mycelium growth. Finally, we demonstrate that the workflow does not require a sterile bioprinting environment to achieve successful prints and that the same mycelium-infused hydrogel can be supplemented with additives such as sawdust to produce mycelium biocomposite objects. These findings demonstrate that 3D bioprinting using mycelium-based feedstocks could be a promising biofabrication technique to produce engineered living materials for applications such as mushroom cultivation, food preparation, or construction of the built environment.

Proliferation and osteogenic differentiation of osteoblast-like cells obtained from two techniques for harvesting intraoral bone grafts.

OBJECTIVES: The aims of our study were to verify the presence of viable osteoblasts in samples of bone tissue obtained by drilling or from cortico-cancellous bone blocks and to assess their growth and differentiation capacities. MATERIALS AND METHODS: Bone tissue samples were processed independently and cultured in Dulbecco's modified Eagle medium, in a CO2 incubator at 37 °C. The proliferative capacity of osteoblasts was determined by spectrophotometry (MTT) at 24 and 48 h of culture. Cell cycle was analysed by flow cytometry. Cell differentiation was studied by red alizarin staining of nodules formed in mineralisation medium and by analysis of alkaline phosphatase activity. RESULTS: In comparison to bone block-derived osteoblasts, the proliferative capacity was greater at 24 and 48 h of culture (P < 0.001) in the drilling-derived osteoblasts, which showed significantly increased G2/M (P = 0.014) and S (P < 0.001) phases in the cell cycle study. The number of mineralised nodules was proportional to the incubation time, with no differences between the two types of sample, which also did not significantly differ in alkaline phosphatase activity. CONCLUSION: Superior autograft material is obtained by harvesting particulate bone from low-speed drilling fragments than from a cortico-cancellous bone block. CLINICAL RELEVANCE: These results suggest that bone obtained from low-speed drilling is a simple and effective alternative to the classic procedure for obtaining bone tissue.

Dibenzo[1,2,5]thiadiazepines are non-competitive GABAA receptor antagonists.

A new process for obtaining dibenzo[c,f][1,2,5]thiadiazepines (DBTDs) and their effects on GABA(A) receptors of guinea pig myenteric neurons are described. Synthesis of DBTD derivatives began with two commercial aromatic compounds. An azide group was obtained after two sequential reactions, and the central ring was closed via a nitrene to obtain the tricyclic sulfonamides (DBTDs). Whole-cell recordings showed that DBTDs application did not affect the holding current but inhibited the currents induced by GABA (I(GABA)), which are mediated by GABA(A) receptors. These DBTDs effects reached their maximum 3 min after application and were: (i) reversible, (ii) concentration-dependent (with a rank order of potency of 2c = 2d > 2b), (iii) mediated by a non-competitive antagonism, and (iv) only observed when applied extracellularly. Picrotoxin (which binds in the channel mouth) and DBTDs effects were not modified when both substances were simultaneous applied. Our results indicate that DBTD acted on the extracellular domain of GABA(A) channels but independent of the picrotoxin, benzodiazepine, and GABA binding sites. DBTDs used here could be the initial model for synthesizing new GABA(A) receptor inhibitors with a potential to be used as antidotes for positive modulators of these receptors or to induce experimental epilepsy.

Factors Influencing the Accuracy of Guided Surgery: An In Vitro Trial.

Purpose: To examine how the accuracy (linear and angular deviation) of implants placed using computer-guided surgery varies in relation to the type of surgical technique (fully guided, half-guided, vs freehand implant placement), bone density (type D1 to D4 bone), and type of support surface (tooth- vs mucosa-supported). Materials and Methods: A total of 32 mandible models were produced (16 partially edentulous and 16 edentulous) using acrylic resin, each calibrated to a different bone density (D1 to D4). Four implants planned using Mguide software were placed in each acrylic resin mandible. A total of 128 implants were placed, distributed according to bone density (D1 to D4, n = 32), the degree of intervention in the surgery (fully guided [FG] = 80, half-guided [HG] = 32, and freehand surgery [F] = 16), and the type of support surface (tooth-supported: n = 64 and mucosa-supported: n = 64). To determine the linear, vertical, and angular deviations between the planned three-dimensional position and the actual position of the implants, the linear and angular difference between them was calculated, with the analysis performed through preoperative and postoperative CBCT scans. The effect was analyzed using parametric tests and linear regression models. Results: All parameters of linear and angular discrepancy in the various regions analyzed (neck, body, and apex) were primarily influenced by the technique and, to a lesser extent, by the bone type, although both variables were predictive and highly significant. These discrepancies tend to increase in completely edentulous models. The regression models show that linear deviations increase by between 630.2 µm at neck level in the buccolingual direction and 836.7 µm at apex level in the mesiodistal direction when comparing the FG and HG techniques. This increase is accumulative when comparing the HG and F techniques. Regarding the effect of bone density, the regression models found that linear discrepancies increase by between 132.6 µm in the axial direction and 199.0 µm at the apex of the implant in the buccolingual direction with each reduction in bone density (D1 to D4). Conclusion: According to this in vitro study, the highest implant placement predictability is found among dentate models with high bone density and a fully guided surgical technique.