Polymeric Nanoparticles with Neglectable Protein Corona.

The current understanding of nanoparticle-protein interactions indicates that they rapidly adsorb proteins upon introduction into a living organism. The formed protein corona determines thereafter identity and fate of nanoparticles in the body. The present study evaluates the protein affinity of three core-crosslinked polymeric nanoparticles with long circulation times, differing in the hydrophilic polymer material forming the particle surface, namely poly(N-2-hydroxypropylmethacrylamide) (pHPMA), polysarcosine (pSar), and poly(ethylene glycol) (PEG). This includes the nanotherapeutic CPC634, which is currently in clinical phase II evaluation. To investigate possible protein corona formation, the nanoparticles are incubated in human blood plasma and separated by asymmetrical flow field-flow fractionation (AF4). Notably, light scattering shows no detectable differences in particle size or polydispersity upon incubation with plasma for all nanoparticles, while in gel electrophoresis, minor amounts of proteins can be detected in the particle fraction. Label-free quantitative proteomics is additionally applied to analyze and quantify the composition of the proteins. It proves that some proteins are enriched, but their concentration is significantly less than one protein per particle. Thus, most of the nanoparticles are not associated with any proteins. Therefore, this work underlines that polymeric nanoparticles can be synthesized, for which a protein corona formation does not take place.

Size influences the effect of hydrophobic nanoparticles on lung surfactant model systems.

The alveolar lung surfactant (LS) is a complex lipid protein mixture that forms an interfacial monolayer reducing the surface tension to near zero values and thus preventing the lungs from collapse. Due to the expanding field of nanotechnology and the corresponding unavoidable exposure of human beings from the air, it is crucial to study the potential effects of nanoparticles (NPs) on the structural organization of the lung surfactant system. In the present study, we investigated both, the domain structure in pure DPPC monolayers as well as in lung surfactant model systems. In the pure lipid system we found that two different sized hydrophobic polymeric nanoparticles with diameter of ~12 nm and ~136 nm have contrasting effect on the functional and structural behavior. The small nanoparticles inserted into fluid domains at the LE-LC phase transition are not visibly disturbing the phase transition but disrupting the domain morphology of the LE phase. The large nanoparticles led to an expanded isotherm and to a significant decrease in the line tension and thus to a drastic disruption of the domain structures at a much lower number of nanoparticles with respect to the lipid. The surface activity of the model LS films again showed drastic variations due to presence of different sized NPs illustrated by the film balance isotherms and the atomic force microscopy. AFM revealed laterally profuse multilayer protrusion formation on compression but only in the presence of 136 nm sized nanoparticles. Moreover we investigated the vesicle insertion process into a preformed monolayer. A severe inhibition was observed only in the presence of ~136 nm NPs compared to minor effects in the presence of ~12 nm NPs. Our study clearly shows that the size of the nanoparticles made of the same material determines the interaction with biological membranes.

Complex Structures Made Simple - Continuous Flow Production of Core Cross-Linked Polymeric Micelles for Paclitaxel Pro-Drug-Delivery.

Translating innovative nanomaterials to medical products requires efficient manufacturing techniques that enable large-scale high-throughput synthesis with high reproducibility. Drug carriers in medicine embrace a complex subset of tasks calling for multifunctionality. Here, the synthesisof pro-drug-loaded core cross-linked polymeric micelles (CCPMs) in a continuous flow processis reported, which combines the commonly separated steps of micelle formation, core cross-linking, functionalization, and purification into a single process. Redox-responsive CCPMs are formed from thiol-reactive polypept(o)ides of polysarcosine-block-poly(S-ethylsulfonyl-l-cysteine) and functional cross-linkers based on dihydrolipoic acid hydrazide for pH-dependent release of paclitaxel. The precisely controlled microfluidic process allows the production of spherical micelles (Dh  = 35 nm) with low polydispersity values (PDI < 0.1) while avoiding toxic organic solvents and additives with unfavorable safety profiles. Self-assembly and cross-linking via slit interdigital micromixers produces 350-700 mg of CCPMs/h per single system, while purification by online tangential flow filtration successfully removes impurities (unimer ≤ 0.5%). The formed paclitaxel-loaded CCPMs possess the desired pH-responsive release profile, display stable drug encapsulation, an improved toxicity profile compared to Abraxane (a trademark of Bristol-Myers Squibb), and therapeutic efficiency in the B16F1-xenotransplanted zebrafish model. The combination of reactive polymers, functional cross-linkers, and microfluidics enables the continuous-flow synthesis of therapeutically active CCPMs in a single process.

Association of a cylindrical polyelectrolyte brush with tetravalent counterions.

Cylindrical poly(styrene sulfonate) brushes were combined with a tetravalent double-DABCO based counterion. With increasing addition of counterion, hydrodynamic radius and radius of gyration decrease and AFMreveals a conformation change from wormlike to curled structures. Rg/Rh changes from 1.3 to 0.9. Above charge stoichiometry, brushes become interconnected into finite size assemblies, which are stable in aqueous solution for charge ratios (ratio of the molar concentration of charged counterion groups to the molar concentration of charged monomer units of the polymer brush) 1 < l < 1.2. They are compact and consist of the brushes in curled (bent) conformation, which is in difference to network-like aggregates from cylindrical poly(styrene sulfonate) brushes with tetravalent porphyrin counterions (Gröhn et al. Macromolecules 2009) and to a wormlike - bent conformation - helix transition found for another brush counterion system (Müller et al. Soft Matter 2009).

Inflammatory and cytotoxic responses of an alveolar-capillary coculture model to silica nanoparticles: comparison with conventional monocultures.

BACKGROUND: To date silica nanoparticles (SNPs) play an important role in modern technology and nanomedicine. SNPs are present in various materials (tyres, electrical and thermal insulation material, photovoltaic facilities). They are also used in products that are directly exposed to humans such as cosmetics or toothpaste. For that reason it is of great concern to evaluate the possible hazards of these engineered particles for human health. Attention should primarily be focussed on SNP effects on biological barriers. Accidentally released SNP could, for example, encounter the alveolar-capillary barrier by inhalation. In this study we examined the inflammatory and cytotoxic responses of monodisperse amorphous silica nanoparticles (aSNPs) of 30 nm in size on an in vitro coculture model mimicking the alveolar-capillary barrier and compared these to conventional monocultures. METHODS: Thus, the epithelial cell line, H441, and the endothelial cell line, ISO-HAS-1, were used in monoculture and in coculture on opposite sides of a filter membrane. Cytotoxicity was evaluated by the MTS assay, detection of membrane integrity (LDH release), and TER (Transepithelial Electrical Resistance) measurement. Additionally, parameters of inflammation (sICAM-1, IL-6 and IL-8 release) and apoptosis markers were investigated. RESULTS: Regarding toxic effects (viability, membrane integrity, TER) the coculture model was less sensitive to apical aSNP exposure than the conventional monocultures of the appropriate cells. On the other hand, the in vitro coculture model responded with the release of inflammatory markers in a much more sensitive fashion than the conventional monoculture. At concentrations that were 10-100fold less than the toxic concentrations the apically exposed coculture showed a release of IL-6 and IL-8 to the basolateral side. This may mimic the early inflammatory events that take place in the pulmonary alveoli after aSNP inhalation. Furthermore, a number of apoptosis markers belonging to the intrinsic pathway were upregulated in the coculture following aSNP treatment. Analysis of the individual markers indicated that the cells suffered from DNA damage, hypoxia and ER-stress. CONCLUSION: We present evidence that our in vitro coculture model of the alveolar-capillary barrier is clearly advantageous compared to conventional monocultures in evaluating the extent of damage caused by hazardous material encountering the principle biological barrier in the lower respiratory tract.

Light-orchestrated macromolecular "accordions": reversible photoinduced shrinking of rigid-rod polymers.

Light can play: Irradiation causes dramatic changes in the shape of rigid-rod polymers incorporating azobenzene photochromes in the main chain. The embedded photoswitches act as hinges, which upon light-induced isomerization lead to reversible shrinking and stretching of the polymer backbone (see scheme), resembling light-orchestrated macromolecular accordions.

Observation of interaction forces by investigation of the influence of eluent additives on the retention behavior of aqueous nanoparticle dispersions in asymmetrical flow field-flow fractionation.

The investigation and subsequent understanding of the interactions of nanomaterials with components of their surrounding media is important to be able to evaluate both potential use cases as well as potential risks for human health and for the environment. To investigate such interactions, asymmetrical flow field-flow fractionation (AF4) is an interesting analytical tool. This statement grounds on the fact that interactions of the analyte with the membrane and with components of the eluent are crucial for the retention behavior of the analyte within the field-flow fractionation (FFF) channel. Therefore, the investigation of the retention behavior provides an insight in the nature of the interactions between analyte, membrane and eluent. Within this publication, the influence of the composition of the eluent on the retention behavior of aqueous dispersions of two model analytes is investigated. Eluents with different types of salts and surfactants and eluents with different salt concentrations were prepared and the influence of the composition of these eluents on the retention behavior of polystyrene and polyorganosiloxane particles was compared. Three main trends were observed: Elution times increase with increasing electrolyte concentration; when comparing different electrolyte anions, the retention time increases the more kosmotropic the anion is; when comparing different electrolyte cations, the retention order depends on the surfactant. Additional dynamic light scattering (DLS) measurements were conducted to verify that the differences in retention times are not caused by actual differences in particle size. Instead, the differences in elution time can be correlated with the concentration and with the chao-/kosmotropicity of the added electrolyte ions. Therefore, AF4 proves to be sensitive to subtile changes of interaction forces on the level of Coulomb and van der Waals forces. The experimentally gathered elution times were used to develop a model describing the retention behavior, based on an enhanced version of the standard AF4 model: By introducing particle-medium-membrane interactions in the standard AF4 model via the respective Hamaker constants, the calculation of retention times was possible. The congruence of the calculated with the experimental retention times confirmed the validity of the simulation.

Influence of oscillating main flow on separation efficiency in asymmetrical flow field-flow fractionation.

The steadily rising interest in the investigation of interactions between nanomaterials and biological media has also led to an increasing interest in asymmetrical flow field-flow fractionation (AF-FFF). The biggest strength of AF-FFF is the possibility to alter the flow profiles to suit a specific separation problem. In this paper, the influence of an oscillating main flow on the separation efficiency of AF-FFF is investigated. Such oscillations can e.g. be caused by the main pump To investigate the influence of such flow conditions on the separation efficiency in AF-FFF systematically, different oscillation profiles were applied and their influence on the elution profile and the retention times was observed. It could be shown, that the separation mechanism is extremely robust and a fractionation is still possible even under unfavorable conditions.

Uptake of polymeric nanoparticles in a human induced pluripotent stem cell-based blood-brain barrier model: Impact of size, material, and protein corona.

The blood-brain barrier (BBB) maintains the homeostasis of the central nervous system, which is one of the reasons for the treatments of brain disorders being challenging in nature. Nanoparticles (NPs) have been seen as potential drug delivery systems to the brain overcoming the tight barrier of endothelial cells. Using a BBB model system based on human induced pluripotent stem cells (iPSCs), the impact of polymeric nanoparticles has been studied in relation to nanoparticle size, material, and protein corona. PLGA [poly(lactic-co-glycolic acid)] and PLLA [poly(d,l-lactide)] nanoparticles stabilized with Tween® 80 were synthesized (50 and 100 nm). iPSCs were differentiated into human brain microvascular endothelial cells (hBMECs), which express prominent BBB features, and a tight barrier was established with a high transendothelial electrical resistance of up to 4000 Ω cm2. The selective adsorption of proteins on the PLGA and PLLA nanoparticles resulted in a high percentage of apolipoproteins and complement components. In contrast to the prominently used BBB models based on animal or human cell lines, the present study demonstrates that the iPSC-based model is suited to study interactions with nanoparticles in correlation with their material, size, and protein corona composition. Furthermore, asymmetrical flow field-flow fractionation enables the investigation of size and agglomeration state of NPs in biological relevant media. Even though a similar composition of the protein corona has been detected on NP surfaces by mass spectrometry, and even though similar amounts of NP are interacting with hBMECs, 100 nm-sized PLGA NPs do impact the barrier, forming endothelial cells in an undiscovered manner.

Colloid-polymer mixtures in solution with refractive index matched acrylate colloids.

Colloid-polymer (CP) mixtures extend between two limiting cases, the colloid limit with the polymer coil size small compared to the colloid radius Rcol and the protein limit with the colloidal particles much smaller in size than the radius of gyration of the polymer chains Rg. In the present work, model systems are developed for the protein limit. The colloid-solvent pairs are optimized in terms of their isorefractivity in order to facilitate the characterization of large polystyrene chains in suspensions of small colloids. The degree of isorefractivity of colloidal particles was successfully evaluated in terms of a reduced scattering intensity. Two polystyrene samples with radii of gyration of Rg = 96 nm and Rg = 78 nm, respectively, are used. The radii of the colloidal particles are close to Rcol = 12 nm, leading to size ratios of Rg/Rcol = 8 and Rg/Rcol = 6.5. Four colloid solvent systems were found to be suitable for polymer characterization by light scattering, one based on silica particles and three systems with acrylate particles. The present investigation is focused on the three acrylate systems: poly(methyl methacrylate) in ethyl benzoate (ETB) at 7 degrees C, poly(ethyl methacrylate) in toluene at 7 degrees C and poly(ethyl methacrylate) in ETB at 40 degrees C. Characterization of PS chains is for the first time performed in colloid concentrations up to 2.5% by weight. In all cases, the size and shape of the polymer chains remain unchanged. A slight mismatch of the colloid scattering or a limited colloid solubility prevented investigation of PS chains at higher colloid concentration.

Determination of Hamaker constants of polymeric nanoparticles in organic solvents by asymmetrical flow field-flow fractionation.

Interaction forces between all objects are either of repulsive or attractive nature. Concerning attractive interactions, the determination of dispersion forces are of special interest since they appear in all colloidal systems and have a crucial influence on the properties and processes in these systems. One possibility to link theory and experiment is the description of the London-Van der Waals forces in terms of the Hamaker constant, which leads to the challenging problem of calculating the van der Waals interaction energies between colloidal particles. Hence, the determination of a Hamaker constant for a given material is needed when interfacial phenomena such as adhesion are discussed in terms of the total potential energy between particles and substrates. In this work, the asymmetrical flow field-flow fractionation (AF-FFF) in combination with a Newton algorithm based iteration process was used for the determination of Hamaker constants of different nanoparticles in toluene.

On the role of surface composition and curvature on biointerface formation and colloidal stability of nanoparticles in a protein-rich model system.

The need for a better understanding of nanoparticle-protein interactions and the mechanisms governing the resulting colloidal stability has been emphasised in recent years. In the present contribution, the short and long term colloidal stability of silica nanoparticles (SNPs) and silica-poly(ethylene glycol) nanohybrids (Sil-PEG) have been scrutinised in a protein model system. Well-defined silica nanoparticles are rapidly covered by bovine serum albumin (BSA) and form small clusters after 20min while large agglomerates are detected after 10h depending on both particle size and nanoparticle-protein ratio. Oppositely, Sil-PEG hybrids present suppressive protein adsorption and enhanced short and long term colloidal stability in protein solution. No critical agglomeration was found for either system in the absence of protein, proving that instability found for SNPs must arise as a consequence of protein adsorption and not to high ionic environment. Analysis of the small angle X-ray scattering (SAXS) structure factor indicates a short-range attractive potential between particles in the silica-BSA system, which is in good agreement with a protein bridging agglomeration mechanism. The results presented here point out the importance of the nanoparticle surface properties on the ability to adsorb proteins and how the induced or depressed adsorption may potentially drive the resulting colloidal stability.

Continuously manufactured magnetic polymersomes--a versatile tool (not only) for targeted cancer therapy.

Micromixer technology was used to prepare polymeric vesicles (Pluronic® L-121) dual loaded with the anti-cancer drug camptothecin and magnetic nanoparticles. Successful incorporation of the magnetic nanoparticles was confirmed by transmission electron microscopy. Dynamic light scattering measurements showed a relatively narrow size distribution of the hybrid polymersomes. Camptothecin polymersomes reduced the cell viability of prostate cancer cells (PC-3) measured after 72 h significantly, while drug-free polymersomes showed no cytotoxic effects. Covalent attachment of a cancer targeting peptide (bombesin) as well as a fluorescent label (Alexa Fluor® 647) to the hybrid polymersomes was performed and specific cell binding and internalization were shown by flow cytometry and confocal microscopy. Relaxometry measurements clearly demonstrated the capacity of magnetic polymersomes to generate significant T2-weighted MRI contrast and potentially allow for direct monitoring of the biodistribution of the polymersomes. Micromixer technology as an easy, fast and efficient way to manufacture hybrid polymersomes as theranostic drug delivery devices is a further step from basic research to personalized medicine.

Rapid formation of plasma protein corona critically affects nanoparticle pathophysiology.

In biological fluids, proteins bind to the surface of nanoparticles to form a coating known as the protein corona, which can critically affect the interaction of the nanoparticles with living systems. As physiological systems are highly dynamic, it is important to obtain a time-resolved knowledge of protein-corona formation, development and biological relevancy. Here we show that label-free snapshot proteomics can be used to obtain quantitative time-resolved profiles of human plasma coronas formed on silica and polystyrene nanoparticles of various size and surface functionalization. Complex time- and nanoparticle-specific coronas, which comprise almost 300 different proteins, were found to form rapidly (<0.5 minutes) and, over time, to change significantly in terms of the amount of bound protein, but not in composition. Rapid corona formation is found to affect haemolysis, thrombocyte activation, nanoparticle uptake and endothelial cell death at an early exposure time.

High-resolution investigation of nanoparticle interaction with a model pulmonary surfactant monolayer.

The pulmonary surfactant film spanning the inner alveolar surface prevents alveolar collapse during the end-exhalation and reduces the work of breathing. Nanoparticles (NPs) present in the atmosphere or nanocarriers targeted through the pulmonary route for medical purposes challenge this biological barrier. During interaction with or passage of NPs through the alveolar surfactant, the biophysical functioning of the film may be altered. However, experimental evidence showing detailed biophysical interaction of NPs with the pulmonary surfactant film are scant. In this study, we have investigated the impact of a hydrophobic polyorganosiloxane (AmOrSil20) NPs on the integrity as well as on the structural organization of the model pulmonary surfactant film. Primarily, scanning force microscopic techniques and electron microscopy have been used to visualize the topology as well as to characterize the localization of nanoparticles within the compressed pulmonary surfactant film. We could show that the NPs partition in the fluid phase of the compressed film at lower surface pressure, and at higher surface pressure, such NPs interact extensively with the surface-associated structures. Major amounts of NPs are retained at the interface and are released slowly into the aqueous subphase during repeated compression/expansion cycles. Further, the process of vesicle insertion into the interfacial film was observed to slow down with increasing NP concentrations. The hydrophobic AmOrSil20 NPs up to a given concentration do not substantially affect the structural organization and functioning of pulmonary surfactant film; however, such NPs do show drastic impacts at higher concentrations.

Investigation of the durability of poly(ether urethane) in water and air.

In this study some relevant aspects of the durability of an aromatic poly(ether urethanes) was investigated. Hydrolytic and oxidative treatments at increased temperatures were applied. The induced changes in the materials under investigation were characterised by complementary polymer characterisation methods, such as ATR-FTIR, DSC and mechanical testing. The thermal and hydrolytic treatment did not significantly affect the chemical composition of the materials. Changes can be observed in the microstructure of the materials.

Polystyrene sulfonate-porphyrin assemblies: influence of polyelectrolyte and porphyrin structure.

In this study, electrostatic self-assembly of different polystyrene sulfonates and a set of tetravalent cationic porphyrins is investigated. It is shown that association of linear polystyrene sulfonates of different molar masses yields finite size nanoscale assemblies that are stable in aqueous solution. Aggregates are compared to the ones of cylindrical brushes, revealing that both form assemblies in the 100 nm range with the charge ratio (molar ratio of porphyrin charges to polyelectrolyte charges) being determining, while the morphology of the resulting network-like assemblies is different for both polyelectrolyte architectures. For the smallest 8k polystyrene sulfonate, in addition, stoichiometric conditions differ. The influence of the molecular porphyrin structure was investigated by comparing meso-tetrakis(4-(trimethyl-ammonium)phenyl)porphyrin (TAPP) with its Cu(II) and Zn(II) loaded analogues and meso-tetrakis(4-N-methylpyridinium)porphyrin (TMPyP), revealing differences in stacking tendency and geometry. Additionally, the TMPyP accumulates more in the inside of the brush than the other porphyrins, likely due to the different position of its charged groups. The supramolecular nanostructures formed were characterized by UV-vis spectroscopy, light scattering, atomic force microscopy, cryo transmission electron microscopy, and small-angle neutron scattering. Results may build a valuable basis for the use of polyelectrolyte-porphyrin assemblies in medicine, catalysis, or energy conversion.

Cylindrical poly(oligo-DNA).

Oligo-desoxyribonuleic acids (ODNs) having a sequence of 5'-TCC ATG ACG TTC-3' were modified at the 5' end by introduction of an amine group via a C6-amino linker. After subsequent reaction of the amine group with N-methacryloyloxysuccinimide, polymerizable ODNs were obtained. Free radical homopolymerization results in the formation of comb polymers, which possess an ODN side-chain at each repeating unit of the main chain. Mainly due to steric repulsion, the main chain has to adopt a semi-flexible wormlike shape instead of the otherwise preferred coiled structure. This leads to the formation of cylindrical poly(oligo-DNA) molecules. Characterization by static and dynamic light scattering of the poly(oligo-DNA) in aqueous solution gave a radius of gyration Rg,app = 67.8 nm, a hydrodynamic radius Rh,app = 44.6 nm, and a characteristic ratio of rho = Rg/Rh = 1.52, indicating the cylindrical shape in solution. In addition, the cylindrical poly(oligo-DNA) molecules were adsorbed onto mica and visualized by atomic force microscopy.