The intestinal microbiota of a Risso's dolphin (Grampus griseus): possible relationships with starvation raised by macro-plastic ingestion.

Ingesting marine plastics is increasingly common in cetaceans, but little is known about their potential effects. Here, by utilizing 16S rRNA gene sequencing, we profiled the intestinal bacterial communities of a stranded Risso's dolphin (Grampus griseus) which died because of the ingestion of rubber gloves. In this study, we explored the potential relationships between starvation raised by plastic ingestion with the dolphin gut microbiota. Our results showed significant differences in bacterial diversity and composition among the different anatomical areas along the intestinal tract, which may be related to the intestinal emptying process under starvation. In addition, the intestinal bacterial composition of the Risso's dolphin showed both similarity and divergence to that of other toothed whales, suggesting potential roles of both host phylogeny and habitat shaping of the cetacean intestinal microbiome. Perhaps, the microbiota is reflecting a potentially disordered intestinal microbial profile caused by the ingestion of macro-plastics which led to starvation. Moreover, two operational taxonomic units (0.17% of the total reads) affiliated with Actinobacillus and Acinetobacter lwoffii were detected along the intestinal tract. These bacterial species may cause infections in immunocompromised dolphins which are malnourished. This preliminary study profiles the intestinal microbiota of a Risso's dolphin, and provides an additional understanding of the potential relationships between starvation raised by ingesting macro-plastics with cetacean gut microbiota.

Simple systems for treating pumped, turbid water with flocculants and a geotextile dewatering bag.

Pumping sediment-laden water from excavations is often necessary on construction sites. This water is often treated by pumping it through geotextile dewatering bags. The bags are not designed to filter the fine sediments that create high turbidity, but dosing with a flocculant prior to the bag could result in greater turbidity control. This study compared two systems for introducing flocculant: passive dosing of commercial solid biopolymer (chitosan) and injection of dissolved polyacrylamide (PAM) in a length of corrugated pipe connected to the bag. The biopolymer system consisted of sequential porous socks containing a "charging agent" followed by chitosan in the corrugated pipe with two levels of dosing. The dissolved PAM was injected into turbid water at a flow-weighted concentration at 1 mg L(-1). For each treatment, sediment-laden turbid water in the range of 2000 to 3500 nephelometric turbidity units (NTU) was pumped into the upstream of corrugated pipe and samples were taken from pipe entrance, pipe exit, and dewatering bag exit. Without flocculant treatment, the dewatering bag reduced turbidity by 70% but the addition of flocculant increased the turbidity reduction up to 97% relative to influent. At the pipe exit, the low-dose biopolymer was less effective in reducing turbidity (37%) but it was equally effective as the high-dose biopolymer or PAM injection after the bag. Our results suggest that a relatively simple treatment with flocculants, either passively or actively, can be very effective in reducing turbidity for pumped water on construction sites.

Flocculated sediments can reduce the size of sediment basin at construction sites.

Due to stringent water quality regulations on stormwater discharges, there is increasing interest in chemically-assisted settling of suspended sediments at construction sites. This study investigated settling characteristics of flocculated sediment by polyacrylamide (PAM) in a top-loading settling tube. Studied sediment materials were obtained from construction sites in North Carolina, USA: Coastal Plain loamy sand (CPLS), Piedmont sandy clay loam (PSCL), Piedmont silt loam (PSL), and Mountain clay loam (MCL). The four different sediment suspensions mixed with and without dissolved PAM were introduced to the top of the column individually. During a 1-h settling period, samples were taken at 1-m depth from surface at various times and analyzed for total suspended solids (TSS). Flocculated sediment by PAM greatly increased its settled TSS fraction up to 95-97% only in 1-min settling period compared to those of unflocculated sediment (16-72%). The settling improvement by PAM was profound in the finer-textured soils (PSL and MCL) by increasing their median particle settling velocity (>2 cm s(-1)) compared to unflocculated counterparts (<1.1 cm s(-1)). Estimated surface area requirement of sediment basin suggested that the basins receiving flocculated sediment could be reduced in size (surface area) by 2- to 4-times compared to those receiving unflocculated sediment. Our results suggests that current sediment basin design could be modified when chemically-assisted settling is implemented, taking up less space and cost in construction sites.

Evolution of treatment mechanics and contemporary appliance design in orthodontics: A 40-year perspective.

Until the early 1970s, successful treatment with the Begg technique and the Tweed edgewise technique required tedious wire bending. The introduction of Andrews' straight wire appliance changed that, and it was one of the most significant contributions in the history of orthodontics. The straight wire appliance significantly reduced the amount of wire bending and also brought along other options in treatment mechanics. Retraction of the canines with elastic chains and ligature wires became more common. Sliding mechanics in place of closing loops became the method of space closure for a significant number of clinicians. Edgewise force levels were initially used to close spaces; however, it was soon observed that lighter forces were more effective with sliding mechanics. Along with these changes, it became apparent that compensation in the appliance was needed, depending on the type of malocclusion and particularly with varying extraction sequences. Various appliance designs were developed to accommodate changes in mechanics and force levels. These modifications improved tooth positions at the end of treatment as long as the brackets were properly placed. These major changes in appliances, force levels, and treatment mechanics can be traced back to the work of Dr Lawrence Andrews and the straight wire appliances.

Check dam and polyacrylamide performance under simulated stormwater runoff.

High levels of turbidity and fine suspended sediments are often found in stormwater discharges from construction sites even when best management practices (BMPs) for sediment control are in place. This study evaluated turbidity reduction by three check dam types: 1) rock check dam representing a standard BMP, 2) excelsior wattle representing a fiber check dam (FCD), and 3) rock check dam wrapped with excelsior erosion control blanket (rock + excelsior ECB) representing an alternative FCD. Three check dams (all same type) were installed in a lined, 24-m ditch on a 5-7% slope and three consecutive simulated stormwater flows were run in the ditch. Additional tests were performed by adding granular polyacrylamide (PAM) on the check dams in the same manner using two sediment sources differing in clay content. Without PAM treatment, significantly higher effluent turbidity (>900 nephelometric turbidity units (NTU)) exited the ditch with rock check dams than with excelsior wattles or rock + excelsior ECBs (<440 NTU). The extent of sediment deposition between the check dam types was in the order of excelsior wattle > rock + excelsior ECB > rock check dam, indicating better water pooling behind the wattle. The PAM treatment reduced turbidity substantially (>75% relative to no PAM treatment) for all check dam types and it was very effective in excelsior wattles (<57 NTU) and rock + excelsior ECBs (<90 NTU) even during the third storm event. This study demonstrates that the passive treatment of runoff with PAM on FCDs (or rock + excelsior ECB) in construction site ditches can be very effective for sediment retention and turbidity reduction.

Combined orthodontic and surgical open bite correction.

OBJECTIVES: To examine the stability of combined surgical and orthodontic bite correction with emphasis on open-bite closure. All study patients were treated with strict and consistent orthodontic and surgical protocols. MATERIALS AND METHODS: Study inclusion required all patients to have anterior open bites, maxillary accentuated curve of Spee, 36-month minimum follow-up, and no temporomandibular joint pathology. Thirty patients met the inclusion/exclusion criteria. Importantly, segmental upper arch orthodontic preparation (performed by EG) was used. Surgery consisted of a multisegment Le Fort I (MSLFI) combined with a bilateral sagittal osteotomies (BSSO). Surgery was performed (by ADA and LT) at the Department of Dentistry and Maxillofacial Surgery of the University of Verona, Italy. RESULTS: The long-term open bite and overjet relapse were not statistically significant. The mean transverse relapse of the upper and lower molars was statistically significant. Of great importance, the upper and lower arch widths narrowed together, maintaining intercuspation of the posterior dentition which prevented anterior open bites from developing. CONCLUSIONS: This study revealed stability of three-dimensional occlusal correction including anterior open bite. Stable open bite closure was achieved by using rigid protocols for orthodontic preparation, surgical techniques, surgical follow-up, and orthodontic finishing.

Combined orthodontic and surgical open bite correction: Principles for success. Part 2.

OBJECTIVES: To present a clinical description of the team's treatment techniques. MATERIALS AND METHODS: In Part 1, 30 patients underwent segmental maxillary orthodontics, multisegment Le Fort I, and bilateral sagittal osteotomies of the mandible. Part 1 reported excellent occlusal stability at a mean follow-up of 49.43 months (range, 36-92 months). Cases presented in Part 2 were selected based on availability of excellent technique photographs. The same techniques described in Part 2 cases were used on all Part 1 patients. RESULTS: The coordination of arch widths and forms, overbite, overjet, and maxillary curve of Spee corrections were stable using the team protocols for orthodontic and surgical treatment. CONCLUSIONS: In the study group, long-term three-dimensionally stable occlusal results were achieved. To duplicate these results, specific orthodontic preparation, intraoperative surgical steps, and postsurgical steps must be carefully planned and executed. These steps are described in this article, Part 2.

Comparison of arch forms between Israeli and North American white populations.

INTRODUCTION: Identification of the dental arch form of the orthodontic patient is a key aspect for achieving a stable, functional, and esthetic dentition. Failure to customize preformed archwires with the patient's arch form might increase the probability of relapse and lead to an unnatural smile. The primary objective of this study was to identify the arch forms of Israeli subjects with dental normocclusion and malocclusions. The secondary objective was to clarify the morphologic differences between Israeli and North American white subjects with various malocclusions. METHODS: The sample included 134 Israeli (40 Class I, 61 Class II, and 33 Class III) and 160 North American (60 Class I, 50 Class II, and 50 Class III) subjects. The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and 2 proportional measurements were made. The dental arches were classified as square, ovoid, and tapered forms to determine and compare the frequency distributions between the 2 ethnic groups. RESULTS: The most frequent mandibular arch form of the Israeli group was found to be ovoid as opposed to tapered in the North American white group. The white population had statistically significant decreased arch widths and increased arch depths compared with the Israeli population. The analysis of the Israeli sample indicated that, as the malocclusion shifts from Class III through Class I to Class II, the weight of the arch form tends to shift from square and ovoid to ovoid and tapered. CONCLUSIONS: Our results suggest that, when treating Israeli patients, one should expect to use the preformed ovoid arch form orthodontic wires in a significant percentage of patients.

Selective cytotoxicity of intracellular amyloid beta peptide1-42 through p53 and Bax in cultured primary human neurons.

Extracellular amyloid beta peptides (Abetas) have long been thought to be a primary cause of Alzheimer's disease (AD). Now, detection of intracellular neuronal Abeta1--42 accumulation before extracellular Abeta deposits questions the relevance of intracellular peptides in AD. In the present study, we directly address whether intracellular Abeta is toxic to human neurons. Microinjections of Abeta1--42 peptide or a cDNA-expressing cytosolic Abeta1--42 rapidly induces cell death of primary human neurons. In contrast, Abeta1--40, Abeta40--1, or Abeta42--1 peptides, and cDNAs expressing cytosolic Abeta1--40 or secreted Abeta1--42 and Abeta1--40, are not toxic. As little as a 1-pM concentration or 1500 molecules/cell of Abeta1--42 peptides is neurotoxic. The nonfibrillized and fibrillized Abeta1--42 peptides are equally toxic. In contrast, Abeta1--42 peptides are not toxic to human primary astrocytes, neuronal, and nonneuronal cell lines. Inhibition of de novo protein synthesis protects against Abeta1--42 toxicity, indicating that programmed cell death is involved. Bcl-2, Bax-neutralizing antibodies, cDNA expression of a p53R273H dominant negative mutant, and caspase inhibitors prevent Abeta1--42-mediated human neuronal cell death. Taken together, our data directly demonstrate that intracellular Abeta1--42 is selectively cytotoxic to human neurons through the p53--Bax cell death pathway.

Quality of clinical photographs taken by orthodontists, professional photographers, and orthodontic auxiliaries.

INTRODUCTION: A survey of the members of the Angle Society of Europe showed that 60% of orthodontists took their own clinical photographs, 35% assigned the task to an auxiliary, and 5% hired professional clinical photographers. It is always useful to ensure that orthodontists' time is used to maximum effect. Clinical photography could be delegated to auxiliary staff. In this study, we assessed the quality of photographs taken by orthodontists to see whether those taken by orthodontic auxiliaries and clinical photographers are of comparable quality. METHODS: Fifty sets of orthodontic photographs were collected from each of 3 types of photographers: orthodontists, orthodontic auxiliaries, and professional clinical photographers. Four assessors scored each set for quality and detailed errors. The results were compared to determine whether there were differences between the quality of the photographs taken by the different groups. RESULTS AND CONCLUSIONS: Most of the photos taken by the 3 groups of photographers were judged to be good or acceptable. The results for extraoral photographs showed no statistically significant differences between the 3 groups for good (P = 0.398) and acceptable (P = 0.398) images. The results for intraoral photographs did not differ significantly for acceptable and unacceptable photographs, but orthodontists produced significantly more good-quality intraoral photographs (P = 0.046).

Acute toxicity of polyacrylamide flocculants to early life stages of freshwater mussels.

Polyacrylamide has become an effective tool for reducing construction-related suspended sediment and turbidity, which are considered to have significant adverse impacts on aquatic ecosystems and are a leading cause of the degradation of North American streams and rivers. However, little is known about the effects of polyacrylamide on many freshwater organisms, and prior to the present study, no information existed on the toxicity of polyacrylamide compounds to native freshwater mussels (family Unionidae), one of the most imperiled faunal groups globally. Following standard test guidelines, we exposed juvenile mussels (test duration 96 h) and glochidia larvae (test duration 24 h) to 5 different anionic polyacrylamide compounds and 1 non-ionic compound. Species tested included the yellow lampmussel (Lampsilis cariosa), an Atlantic Slope species that is listed as endangered in North Carolina; the Appalachian elktoe (Alasmidonta raveneliana), a federally endangered Interior Basin species; and the washboard (Megalonaias nervosa), a common Interior Basin species. We found that median lethal concentrations (LC50s) of polyacrylamide ranged from 411.7 to >1000 mg/L for glochidia and from 126.8 to >1000 mg/L for juveniles. All LC50s were orders of magnitude greater (2-3) than concentrations typically recommended for turbidity control (1-5 mg/L), regardless of their molecular weight or charge density. The results demonstrate that the polyacrylamide compounds tested were not acutely toxic to the mussel species and life stages tested, indicating minimal risk of short-term exposure from polyacrylamide applications in the environment. However, other potential uses of polyacrylamide in the environment (e.g., wastewater treatment, paper processing, mining, algae removal) and their chronic or sublethal effects remain uncertain and warrant additional investigation. Environ Toxicol Chem 2017;36:2715-2721. Published 2017 Wiley Periodicals Inc. on behalf of SETAC. This article is a US government work and, as such, is in the public domain in the United States of America.

Redefining orthodontic space closure: sequential repetitive loading of the periodontal ligament--a clinical study.

AIMS: To assess the rate of tooth movement, anchorage loss, root resorption, and alkaline phosphatase (ALP) activity in the gingival crevicular fluid (GCF) as a marker for bone remodeling during orthodontic space closure using two different mechanisms. METHODS: Space closure was completed in 20 patients with extraction of all 4 premolars. Lateral cephalograms and radio-visiographs taken before (T1) and after (T2) space closure were assessed for anchorage loss and root resorption. Alkaline phosphatase levels were measured in 10 patients, which were divided into two groups of five each. Spaces were closed with a screw device in the first group and with active tie-backs in the second. Gingival crevicular fluid samples, collected at intervals, were assayed for alkaline phosphatase spectrophotometrically in each patient. RESULTS: The mean rate of tooth movement was 1.32 ± 0.22 mm/month. The mean amount of anchorage loss in the maxilla and mandible was 1.23 ± 0.60 mm and 1.08 ± 0.65 mm, respectively. Sixty (25%) roots showed no root resorption, while 180 (75%) roots displayed mild to moderate blunting of their apices. Gingival crevicular fluid-alkaline phosphatase level increased significantly from day 7 to day 28 in both groups, but significantly more in the screw retraction group (P<.05). CONCLUSION: It is possible to infer that space closure occurs more rapidly with sequential repetitive loading of the periodontal ligament than with conventional active tie-backs. This observation is in concurrence with a significant increase in the gingival crevicular fluid-alkaline phosphatase level.

Comparison of arch forms between Korean and North American white populations.

The purpose of this study was to evaluate morphologic differences in the mandibular arches of Korean and North American white subjects. The subjects were grouped according to arch form (tapered, ovoid, and square) to compare the frequency distribution of the 3 arch forms between the ethnic groups in each Angle classification. The sample included 160 white (60 Class I, 50 Class II, and 50 Class III) and 368 Korean (114 Class I, 119 Class II, and 135 Class III) subjects. The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth according to mandibular tooth thickness data, and then 4 linear and 2 proportional measurements were taken. Arch width was statistically significantly smaller in the white group than in the Korean group, but arch depth did not differ. In the Korean group, the most frequent arch form was square, whereas in the white group the tapered arch form predominated. When the subjects were regrouped by arch form, the Korean arches had a tendency to be larger and deeper than the white arches within each of the 3 arch form types.

Nature of the genome of the saprophytic spirochete Spirochaeta aurantia and its ribosomal RNA operons.

Using restriction endonucleases DraI, AseI, and I-CeuI in conjunction with pulsed-field gel electrophoresis, we have shown that Spirochaeta aurantia M1 possesses a circular 3.98-Mb genome. This is the second largest spirochete chromosome yet analyzed. The observation that the latter enzyme cuts in 3 places suggests the presence of 3 copies of the large subunit (23S) rRNA gene (rrl), which was confirmed by Southern hybridizations. The complete sequence of 2 of the ribosomal RNA operons was determined, revealing that their structure resembled that of the typical member of the bacterial superkingdom: rrs (16S; 1561 bp), tRNA, rrl (23S; 2972 bp), and rrf (5S; 110 bp). The S. aurantia rrs-rrl intergenic regions, as with Treponema denticola, contain genes specifying a 73-nt tRNA(Ala) (anticodon TGC) and a 77-nt tRNA(Ile) (anticodon GAT).