Enamel Caries Lesion Depth Obtained by Optical Coherence Tomography and Transverse Microradiography: A Comparative Study.

INTRODUCTION: Visual imaging of subsurface caries lesions is of vital interest in dentistry, which can be obtained by invasive radiography technique as well as by available non-destructive imaging approaches. Thus, as a first step toward the development of a new innovative approach, Spectral-domain optical coherence tomography (SD-OCT) was applied to detect the lesion depth in comparison to the established reference technique (transverse microradiography [TMR]). METHODS: Bovine enamel specimens were demineralized for 5 days, following previous studies. For OCT, the resulting artificial lesions were scanned three-dimensionally (SD-OCT) and semi-automated measured (CarLQuant). For TMR, specimens were sectioned and the lesion depth was manually determined (Inspektor Research System). RESULTS: The range of lesion depth detected with OCT was 24.0-174.0 µm (mouth rinse study), 18.0-178.0 µm (toothpastes study) and with TMR 59.2-198.0 µm (mouth rinse study), 33.2-133.4 µm (toothpastes study). We found a strong correlation between both methods in terms of lesion depth (Spearman rankwith outlierp < 0.001, Rho = 0.75, Spearman rankwithout outlierp = 0.001, Rho = 0.79). The two methods produce similar results (Passing-Bablok regression, 1.16). As deeper is the lesion, the smallest is the difference between both methods as indicated by Bland-Altman-plots. CONCLUSION: Especially in the case of deep lesions, the values obtained by both methods are in agreement, and OCT can potentially substitute TMR to detect and assess lesion depth with the benefit of being non-destructive.

The Effect of Solutions Containing Extracts of Vochysia tucanorum Mart., Myrcia bellaCambess., Matricaria chamomilla L. and Malva sylvestris L. on Cariogenic Bacterial Species and Enamel Caries Development.

This study evaluated the effect of experimental solutions containing plant extracts on bacterial species and enamel caries prevention. Microcosm biofilm was produced from human saliva mixed with McBain saliva (0.2% sucrose) on bovine enamel for 5 days (3 days under anaerobiosis and 2 days under aerobiosis) at 37°C. From the 2nd day, the following treatments were applied (1 × 60 s/day): Vochysia tucanorum (10 mg/mL); Myrcia bella (5 mg/mL); Matricaria chamomilla (80 mg/mL); Malva sylvestris, fluoride, and xylitol (Malvatricin Plus®); 0.12% chlorhexidine (CHX, PerioGard®); and PBS (negative control). The medium pH was measured. Quantitative polymerase chain reaction was performed for the detection of Streptococcus mutans and Lactobacillus spp. Enamel demineralization was measured by spectral-domain optical coherence tomography. The data were compared by means of the Kruskal-Wallis/Dunn, two-way ANOVA/Bonferroni, and ANOVA/Tukey tests (p < 0.05). The pH decreased after sucrose exposure; only CHX reestablished pH >5.5 by the last day. CHX also eliminated Lactobacillusspp., but the other treatments did not differ significantly from PBS. Malvatricin Plus® and CHX eliminated S. mutans, but the other treatments did not differ from PBS. Similar results were seen concerning the reduction of lesion depth and reflectivity. The experimental natural-extract solutions were ineffective against cariogenic bacteria and in preventing the development of enamel caries.

Tooth-composite bond failure with a universal and an etch-and-rinse adhesive depending on mode and frequency of application.

OBJECTIVES: To evaluate the effect of an additional layer of universal adhesive on the interfacial enamel/dentin-composite gap formation in relation to application mode and aging, via spectral domain optical coherence tomography (SD-OCT) and scanning electron microscopy (SEM). METHODS: In vitro class V cavities in 114 caries-free premolars were restored by applying one or two layers of a universal adhesive (Scotchbond Universal, SBU) in self-etch (se) and etch-and-rinse (er) mode or the reference adhesive OptiBond FL (OFL-er). The restorations were imaged by SD-OCT (six groups, n = 8) and SEM (n = 3) directly after filling (t1), water storage (t2, 24 h), embedding (t3), and thermo-mechanical loading (t4, TCML). The interfacial gaps were quantified using 26 parameters and analyzed using principal component analysis and linear mixed effect models. RESULTS: Gap formation at enamel and dentin was significantly influenced by the adhesive, the application mode and number of layers (p < 0.001). This was due to the influence of the SBU-er mode (p < 1e-05), which showed significantly more gap formation and a greater range of variation with double application when compared to SBU-se and OFL. The fewest interfacial gaps occurred with one or two applications of OFL-er and one layer of SBU-er. SIGNIFICANCE: Adhesive application mode and the number of adhesive layers are relevant factors in the tooth-composite bond failure. Double application worsened the adaptation of SBU to freshly prepared dentin conditioned with phosphoric acid.

Transport of carbon colloid supported nanoscale zero-valent iron in saturated porous media.

Injection of nanoscale zero-valent iron (nZVI) has recently gained great interest as emerging technology for in-situ remediation of chlorinated organic compounds from groundwater systems. Zero-valent iron (ZVI) is able to reduce organic compounds and to render it to less harmful substances. The use of nanoscale particles instead of granular or microscale particles can increase dechlorination rates by orders of magnitude due to its high surface area. However, classical nZVI appears to be hampered in its environmental application by its limited mobility. One approach is colloid supported transport of nZVI, where the nZVI gets transported by a mobile colloid. In this study transport properties of activated carbon colloid supported nZVI (c-nZVI; d50=2.4µm) are investigated in column tests using columns of 40cm length, which were filled with porous media. A suspension was pumped through the column under different physicochemical conditions (addition of a polyanionic stabilizer and changes in pH and ionic strength). Highest observed breakthrough was 62% of the injected concentration in glass beads with addition of stabilizer. Addition of mono- and bivalent salt, e.g. more than 0.5mM/L CaCl2, can decrease mobility and changes in pH to values below six can inhibit mobility at all. Measurements of colloid sizes and zeta potentials show changes in the mean particle size by a factor of ten and an increase of zeta potential from -62mV to -80mV during the transport experiment. However, results suggest potential applicability of c-nZVI under field conditions.

Functional expression of dental plaque microbiota.

Dental caries remains a significant public health problem and is considered pandemic worldwide. The prediction of dental caries based on profiling of microbial species involved in disease and equally important, the identification of species conferring dental health has proven more difficult than anticipated due to high interpersonal and geographical variability of dental plaque microbiota. We have used RNA-Seq to perform global gene expression analysis of dental plaque microbiota derived from 19 twin pairs that were either concordant (caries-active or caries-free) or discordant for dental caries. The transcription profiling allowed us to define a functional core microbiota consisting of nearly 60 species. Similarities in gene expression patterns allowed a preliminary assessment of the relative contribution of human genetics, environmental factors and caries phenotype on the microbiota's transcriptome. Correlation analysis of transcription allowed the identification of numerous functional networks, suggesting that inter-personal environmental variables may co-select for groups of genera and species. Analysis of functional role categories allowed the identification of dominant functions expressed by dental plaque biofilm communities, that highlight the biochemical priorities of dental plaque microbes to metabolize diverse sugars and cope with the acid and oxidative stress resulting from sugar fermentation. The wealth of data generated by deep sequencing of expressed transcripts enables a greatly expanded perspective concerning the functional expression of dental plaque microbiota.

Stress improves task processing efficiency in dual-tasks.

Psychological stress has attracted much interest as a potential modulator of response control processes. However, especially in dual-task situations, the effect of psychological stress is less understood. In the current study we investigated these effects. "Thirty six" healthy young male participants were exposed to stress applying the socially evaluated cold pressor task (SECPT) or a control condition. Afterwards they participated in a psychological refractory period (PRP) paradigm comprising two tasks (a "tone task" and a "letter task"). With the PRP task, four different stimulus onset asynchronies (SOA) were realized separating the tone from the letter task. The results show that stress improves task processing efficiency in dual-tasks. Stressed participants showed a reduced PRP effect (i.e., shorter response times), which was especially prominent in the short SOAs conditions (16 and 133ms). The analysis of the response times suggests that stress increases dual-tasking performance by modulating the efficiency to process the different tasks and not because 'cognitive flexibility' and switching between task components at the bottleneck is altered. Increases in processing efficiency in dual-tasks were predictable by means of individual salivary cortisol levels.