Skeletal and dental effects of function-generating bite appliance compared to rapid palatal expander and untreated controls.

INTRODUCTION: Maxillary expansion is a fundamental interceptive orthodontic treatment, which can be achieved through either a rapid expansion protocol or functional devices. However, no data exist about the efficacy of functional devices in achieving skeletal expansion. Therefore, the aim of this study was to compare the effects of the rapid palatal expander (RPE) and the function-generating bite type M (FGB-M) on the transversal dimension of the maxilla, and on the maxillary and mandibular dental arch width. METHODS: One hundred eighty-one skeletal Class I patients, aged between 6 and 12 years and with a cervical vertebral maturation stage II or III, with maxillary transversal deficiency were retrospectively enrolled; among these 55 were treated with FGB-M, 73 were treated with RPE and 51 were untreated subjects retrieved from historical databases. The pre-treatment (T0) and post-treatment (T1) frontal cephalograms were retrieved, and the maxillary and mandibular widths, and the distance between upper and lower first molars were measured. T1-T0 interval was of 17.3 months (RPE), 24.6 months (FGB-M) and 18.2 months (controls). RESULTS: The statistical analysis showed that there were no statistically significant differences between the RPE and FGB-M groups regarding skeletal and dental expansion, while the untreated control group differed significantly from the other two groups. CONCLUSION: The comparison between patients treated with RPE and FGB-M showed that there were no statistically significant differences between the RPE and FGB-M groups regarding the amount of skeletal expansion and dental arch width, suggesting that both appliances can be used to achieve similar results.

Evaluation of occlusal force in Class II subdivision malocclusion.

BACKGROUND: Class II subdivision is a malocclusion characterized by dental and functional asymmetry that is difficult to manage. Impaired muscle function can result in asymmetrical growth, leading to occlusal instability. OBJECTIVE(S): The study aimed to assess occlusal force in patients with Class II subdivision malocclusion using Innobyte. Additionally, the discrepancies of force generated at the position of maximum intercuspidation between the left and right sides of the arches were evaluated. METHODS: The occlusal force of 66 patients with Class II subdivision malocclusion (group S) was measured and compared with that of 66 patients with Class I (group I) and 66 patients with Class II malocclusion (group II). The S group patients had a Class I molar on the right side and a Class II molar on the left side. ANOVA test, followed by the Games-Howell post hoc test, was performed to compare the mean of the total force among the groups. To assess the difference in force between the right and left arches, one-way ANOVA test followed by Tukey's post hoc comparison was performed. Finally, a boxplot was created to show the trend of occlusal force recorded in the three groups of patients. RESULTS: The occlusal force differed significantly among the groups (p < .001). Post hoc Games-Howell analysis showed significant differences as follows: the total force in group S was 165.24 N greater than in group II and in group I was 218.06 N greater than in group II. The difference (right-left) in total force between the groups was statistically significant (p < .001). Tukey's post hoc test showed following significant correlation: in group S was 53.51 N greater than in group II and 63.12 N greater than in group I. CONCLUSIONS: Among the analysed groups, patients with Class II malocclusion exhibited the lowest value of occlusal force. In patients with Class II subdivision malocclusion, force asymmetry, characterised by a higher value on the Class I side and a lower value on the Class II side was observed.

Effects of crown movement on periodontal biotype: a digital analysis.

Orthodontic treatment has important correlations with periodontal changes. Various mechanical and biological factors are involved in determining such changes, but anatomical and morphological variables, generally addressed as periodontal biotype, play a key role. In measurement of such modifications, digital and non-contact reverse engineering technologies may be of tremendous advantage. The aim of this study is to retrospectively evaluate, in a series of digitized dental casts, some of the parameters addressing periodontal biotype and correlate them to extent and direction of tooth movement. Pre- (T0) and post-treatment (T1) dental casts of 22 patients were scanned by 3Shape TRIOS 3® scanner. A number of variables (crown ratio, gingival margin position, gingival contour, papillae position, gingival scallop) were investigated and their variations calculated after digital measurements on single casts at T0 and T1, or after direct measurement (T1 vs T0) on the superimposition and alignment of digital models. Univariate and multivariate statistics were then performed. No significant correlation was detected between the sagittal or vertical movement of dental crown and displacement of the gingival margin. On the other hand, vestibular gingival contour resulted significantly altered by vestibular and extrusion movements. Further studies are needed to ascertain the differential effect of bone and soft tissue on such modifications. The relationship between orthodontic treatment and the periodontium overcomes the consideration of gingival recession and includes all the concepts of periodontal biotype with its characteristics. Digital technologies and non-contact reverse engineering techniques now available have the potential to allow a more precise definition of such a relationship.

Prosthesis Emergence Angle Influences Marginal Bone Level for External Connection Implants: A Cross-Sectional Study.

PURPOSE: To retrospectively evaluate the influence of prosthetic features on marginal bone level changes around bone-level implants with an external hex connection. MATERIALS AND METHODS: A total of 100 patients with 166 implants and cemented crowns were included. Demographic and clinical data were collected. Prosthetic features were radiographically evaluated, including emergence angle (EA), emergence profile (EP), crown-implant ratio (CIR), and abutment height. Marginal bone levels were measured on intraoral radiographs taken at baseline and after at least 1 year. The correlation between prosthetic features and marginal bone loss (MBL) was then investigated. RESULTS: The mean follow-up time was 43.94 months. Implant length varied between 5 and 13 mm. The mean height of the abutments used was 1.55 mm. EA measured an average 30.62 degrees (± 13.20) mesially and 29.45 degrees (± 13.07) distally. The CIR was 0.99 (± 0.26). The mean MBL was 0.19 mm on the mesial side and 0.20 mm on distal side of the implants. Significant positive associations emerged between MBL and implant length (P < .005) and with EA (P < .05). A convex profile of the crown was shown to be associated with a higher distal MBL (P = .025) compared to concave and straight profiles.

Changes in implant stability using different site preparation techniques: Osseodensification drills versus piezoelectric surgery. A multi-center prospective randomized controlled clinical trial.

INTRODUCTION: Implant stability is influenced by bone density, implant design, and site preparation characteristics. Piezoelectric implant site preparation (PISP) has been demonstrated to improve secondary stability compared with conventional drilling techniques. Osseodensification drills (OD) have been recently introduced to enhance both bone density and implant secondary stability. The objective of the present multi-center prospective randomized controlled trial was to monitor implant stability changes over the first 90 days of healing after implant bed preparation with OD or PISP. METHODS: Each patient received two identical, adjacent or contralateral implants in the posterior maxilla. Following randomization, test sites were prepared with OD and control sites with PISP. Resonance frequency analysis was performed immediately after implant placement and after 7, 14, 21, 28, 60, and 90 days. Implants were then restored with single screw-retained metal-ceramic crowns and followed for 12 months after loading. RESULTS: Twenty-seven patients (15 males and 12 females; mean age 63.0 ± 11.8 years) were included in final analysis. Each patient received two identical implants in the posterior maxilla (total = 54 implants). After 1 year of loading, 53 implants were satisfactorily in function (one failure in test group 28 days after placement). Mean peak insertion torque (40.7 ± 12.3 Ncm and 39.5 ± 10.2 Ncm in test and control group, respectively) and mean implant stability quotient (ISQ) value at baseline (71.3 ± 6.9 and 69.3 ± 7.6 in test and control group, respectively) showed no significant differences between the two groups. After an initial slight stability decrease, a shift to increasing ISQ values occurred after 14 days in control group and after 21 days in test group, but with no significant differences in ISQ values between the two groups during the first 90 days of healing. CONCLUSION: No significant differences in either primary or secondary stability or implant survival rate after 1 year of loading were demonstrated between implants inserted into sites prepared with OD and PISP.

Correlation between dental arch form and OSA severity in adult patients: an observational study.

BACKGROUND: The role of interdental widths and palatal morphology on the development of obstructive sleep apnea (OSA) has not been well investigated in adult patients yet. The aim of this paper was to assess the morphology of maxilla and mandibular dental arches on three-dimensional (3D) casts and to correlate these measurements with the severity of OSA. METHODS: Sixty-four patients (8 women and 56 men, mean age 52.4) with a diagnosis of mild-to-moderate OSA were retrospectively enrolled. On each patient, home sleep apnea test and 3D dental models were collected. Apnea-hypopnea index (AHI) and oxygen desaturation index (ODI) were recorded, as well as the dental measurements including inter-molar distance, anterior and posterior widths of maxillary and mandibular arches, upper and lower arch lengths, palatal height, and palatal surface area. The respiratory and dental variables were then correlated. RESULT: A statistically inverse correlation was found between ODI and anterior width of lower arch, maxillary arch length, palatal height, and palatal area. AHI showed a significant inverse correlation with anterior width of mandibular arch and maxillary length. CONCLUSION: A significant inverse correlation between maxillary and mandibular morphology and respiratory parameters was shown in the present paper.

Craniofacial morphology in Obstructive Sleep Apnea patients.

Background: To evaluate the correlation between cephalometric skeletal parameters and Obstructive Sleep Apnea syndrome (OSAs) severity, in adult patients with OSAs. Material and Methods: One hundred patients (94 males,6 females mean age 59,3) with diagnosis of OSAs were retrospectively enrolled. Each patient received Home Sleep Apnea Testing (HSAT) and latero-lateral radiograph. Eight cephalometric parameters (cranial deflection angle, saddle angle, articular angle, divergence angle, cranial base angle, skull base length, mandibular length, maxilla length) were analyzed and then related to Apnea/Hypopnea Index (AHI) and to the Oxygen Desaturation Index (ODI), recorded by HSAT. A Spearman's rho correlation test between cephalometric measurements and HSAT indices was performed. Statistical significance was set at p< 0.05. Results: A negative statistically significant correlation was found between mandibular length (Condilion-Gnathion distance) and AHI (rho= -0,2022; p<0,05) and between maxilla length (Ans-Pns) and AHI (rho= -0,2984; p<0,01) and ODI (rho= -0,2443; p<0,05). A statistically significant correlation was also observed between the divergence angle (S-N^Go-Me) and AHI (rho=0,2263; p<0,05) and between cranial deflection angle (Fh^NBa) and AHI (rho=0,2212; p<0,05) and ODI (rho=0,1970; p<0,05). Conclusions: The OSAs severity may be related to certain predisposing features in craniofacial morphology, such as maxillary and mandibular length, divergence and cranial deflection. Key words:OSAs, Home Sleep Apnea Testing, AHI, ODI, Cephalometry, Airway.

Maxillary Transverse Deficit: A Retrospective Study of Two Biologically Oriented Devices through a Digital Workflow.

The aim of this retrospective study was to compare the efficiency of two biologically oriented devices in achieving maxillary expansion: Rapid Palatal Expander (RPE) and Nitanium Palatal Expander-2 (NPE-2). Thirty-six subjects, divided in two equal groups, were included in this study. Maxillary dental arches were scanned using Trios 3 shape®, in order to perform a digital analysis of 3D models. The models were analyzed using Autodesk Fusion 360® and Meshmixer®. All data obtained from analysis of pre-treatment and post-treatment models were processed using Prism® software. The anterior arch width, the posterior arch width, the palate height, and palatal surface were measured to evaluate differences between the devices. A D'Agostino-Pearson normality test was done to check the data. A non-parametric t-test was used to compare the anterior and posterior arch width between the two groups, while a parametric t-test was used to compare the palatal height measurements between the two groups. The p-value was calculated. The limit value fixed was 0.05. Palatal width and surface showed a significant increase in both groups, but no significant changes in palatal height were found. The data processed showed that there were no significant differences between the devices (ΔREP-ΔNPE) in variation of anterior arch width, there were no significant differences in variation of posterior arch width and there were no significant differences in variation of palatal height. The comparison between the two groups showed that both methods were equally effective in correcting transverse defect.

Changes in hyoid bone and tongue position in Class I subjects after orthodontic treatment with rapid palatal expander.

OBJECTIVE: To evaluate the effects of the rapid palatal expander (RPE) on the hyoid bone and tongue position in skeletal Class I patients, compared to control groups. METHODS: Eighty-four Class I subjects, aged 6-14, were selected. Among these, 28 patients were treated with RPE, 28 with function-generating bite (FGB) appliance, and 28 were untreated. Lateral cephalograms taken before (T0) and after (T1) treatment were retrieved. Changes in the hyoid bone and tongue position were evaluated, and the area above the tongue was measured. RESULTS: No significant difference in the hyoid and tongue posture was observed across the groups. However, there were significant differences for HC3 (distance from H-point to the third cervical vertebrae), H2H (distance from H-point to SN plane), and TT-Eb (tongue length) between T0 and T1 in all groups. CONCLUSION: The results suggest that hyoid bone and tongue position changes were related to growth rather than treatment.

OSA Wellness Scale (OWS): A New Health-Related Quality of Life Test in Obstructive Sleep Apnea Patients Treated with Mandibular Advancement Device.

Objectives: To present a new short self-test, called the OSA wellness scale (OWS), for assessing the health-related quality of life (HRQoL) changes in obstructive apnea syndrome (OSA) patients treated with mandibular advancement device (MAD). Methods: 51 OSA patients (8 women and 43 men, mean age 52.3) treated with a fully customizable MAD device (Protrusor) were retrospectively enrolled. Each patient received a home sleep apnea testing (HSAT) at baseline (T0) and after three months of MAD treatment (T1). Two self-test evaluations, the Epworth sleepiness scale (ESS), and OWS were also submitted at T0 and T1. The OWS was a short self-test of 8 questions for evaluating the daytime HRQoL. Patients gave an assessment from 0 to 3 for each question. At the end of the questionnaire, the patients had a score from 0 to 24, resulting from the sum of all 8 scores. The higher the score, the greater the patient's perceived state of discomfort. Results: At T1, a significant decrease in the oxygen desaturation index (ODI) and apnea-hypopnea index (AHI) was shown (p < 0.0001), while no significant changes in body mass index (BMI) were found. Both the ESS and the OWS records showed a significant reduction in daytime sleepiness and HRQoL (p < 0.0001). Conclusion: The OWS could be a useful method to verify and numerically compare the perceived quality of life in OSA patients, before and after MAD therapy.

Long-term effect on adenoid dimensions and craniocervical angulation after maxillary expansion with fixed or functional appliances.

BACKGROUND: Maxillary expansion is a common orthodontic procedure that could have a positive effect also on airway patency. The aim of the present study was to evaluate the long-term effects of rapid maxillary expansion (RME) on nasopharyngeal area and cranio-cervical angulation in growing patients, compared to controls treated with a function-generating bite appliance (FGB). MATERIAL AND METHODS: Sixty patients aged 6-14 consecutively treated with RME or FGB were selected retrospectively and divided into two groups. Lateral cephalograms taken before and after treatment were retrieved, and the nasopharyngeal area, delimited superiorly by a sella-posterior nasal spine (PNS) line and inferiorly by a basion-PNS line, and the cranio-cervical angulation were measured. RESULTS: The mean observation time was 17.6 ± 8 months. No differences were present between the two groups regarding age and gender. The nasopharyngeal area increased significantly in both groups after treatment, but with no statistically significant difference between them. The cranio-cervical angulation showed no differences within or between groups. CONCLUSIONS: Maxillary deficiency treatment with either RME or FGB was followed by a comparable increase in nasopharyngeal area. Key words:Rapid maxillary expansion, Airway, Nasopharyngeal area, Adenoid.

Morphometric analysis of sella turcica in growing patients: an observational study on shape and dimensions in different sagittal craniofacial patterns.

The aim of this study was to evaluate the differences in sella dimensions and shape between growing patients with Class I, Class II, and Class III skeletal malocclusions, evaluated through morphometric analysis. Seventy-eight subjects aged between 9 and 13 years were selected and assigned to either the Class I, Class II, or Class III groups according to the measured ANB angle (the angle between the Nasion, skeletal A-point and skeletal B-point). Six landmarks were digitised to outline the shape of the sella turcica. Linear measurements of the sella length and depth were also performed. Procrustes superimposition, principal component analysis, and canonical variate analysis were used to evaluate the differences in sella shape between the three groups. A one-way MANOVA and Tukey's or Games-Howell tests were used to evaluate the presence of differences in sella dimensions between the three groups, gender, and age. The canonical variate analysis revealed a statistically significant difference in sella shape between the Class I and the Class II groups, mostly explained by the CV1 axis and related to the posterior clinoidal process and the floor of the sella. No differences were found regarding linear measurements, except between subjects with different age. These differences in sella shape, that are present in the earlier developmental stages, could be used as a predictor of facial growth, but further studies are needed.

Non-surgical Treatment of Condylar Fracture in an 11-Year-Old Patient: a Case Report.

BACKGROUND: Mandibular condylar fractures commonly occur after trauma and account for 25 to 35% of all mandibular fractures; its appropriate therapy still remains a point of controversy in children. The purpose of this paper is to describe the treatment of an 11-years-old male patient affected by neck-condylar fracture as result of trauma in evolutive age. METHODS: No surgical treatment was performed. A functional therapy was applied with a jaw splint. A closed treatment for mandibular condyle fractures was preferred because the amount of condylar displacement wasn't considerable. RESULTS: The early treatment with functional therapy generated a functional adaptation of the condyle in the glenoid fossa and a normal mandibular function. After a 12-month follow-up the fracture resolution and an optimal condylar position were recorded. CONCLUSIONS: The current case report and literature review showed that non-surgical therapy of neck-condylar fracture in a child with lower resin splint can restore mandibular movements and aesthetics. Facial growth after one year treatment resulted normal. A conservative treatment may be appropriate for children in selected cases with minimally displaced condyle.

Early treatment of pseudo-class III malocclusion with modified swallowing occlusal contact intercept appliance (S.O.C.I.A.).

AIMS: The aim of the present work was to evaluate the dentoskeletal effects of swallowing occlusal contact intercept appliance (SOCIA) III in pseudo Class III malocclusion treatment. MATERIALS AND METHODS: Thirty-six patients (mean age: 9.46 years old) with pseudo-Class III malocclusion and 22 pseudo-Class III untreated controls (mean age: 8.7 years old) were selected and examined. All patients presented with a cervical stage CS2, CS3, or CS4. Patients with CS5 were not enrolled in the study. Cephalometric analysis was performed before phase 1 treatment (T1) and immediately following phase 2 treatment (T2). STATISTICAL ANALYSIS: Paired t-test and independent t-test. RESULTS: SOCIA III had skeletal and dental effects. The main effects of SOCIA III were on the midface with an effective increase of the sagittal growth (cranial base P < 0.001, anterior cranial base (ACB) P < 0.001, and maxilla growth P < 0.001) and vertical growth (anterior facial height P < 0.001). The effects of SOCIA on the mandible were a control of mandibular postrotation (P = 0.82) and the sagittal growth (P < 0.007). At the end of the treatment, a normal overjet was achieved (P < 0.001). CONCLUSIONS: The SOCIA III effects are resumed as follow: (a) an effective maxillary sagittal increase on the sagittal plane; (b) a vertical mandibular control; (c) a resolution of overjet; (d) no increase of overbite; (e) a stimulation of ACB growth.

Treatment of hyperdivergent growth pattern and anterior open bite with posterior metallic bite planes.

BACKGROUND: In the present paper, the authors analyze the effect of the "Swallowing Occlusal Contact Intercept Appliance" (SOCIA) in treatment of children with hyperdivergent Class II malocclusion. This functional appliance has no intra-oral anchorage, but induces a continuous periodontal, muscular, and articular stimulation. METHODS: Twenty-six patients with hyperdivergent growth and class II malocclusion were selected and treated with SOCIA appliance. Cephalometric analysis was performed before treatment (T1) and immediately after the treatment (T2). RESULTS: After 24 months treatment authors observed a modification of maxillary growth with a reduction of the divergence with an increase of the posterior facial height, a modification of condylar inclination and forward position of the a hyoid. No modifications was observed about the ANB angle. After treatment the open bite was resolved with a reduction of the inclination of the upper incisors. CONCLUSIONS: SOCIA is a reliable functional appliance in growing age patients with a hyperdivergent pattern growth, anterior open bite and class II molar malocclusion.

Dentoskeletal modifications in Class II deep bite malocclusion treatment with anterior bite plane functional appliance.

BACKGROUND: A treatment modality for Class II division 1 malocclusion is discussed. Orthodontic treatment of patients with deep bite and Class II malocclusion is an important challenge in clinical practice. The aim of this work is to compare the efficacy of anterior bite plane functional appliance (ABPFA) by assessing the changes in different times with untreated patients by literature. MATERIAL AND METHODS: The study group comprised 22 subjects with Class II division 1 malocclusion and hypo-divergent. Eligibility criteria for this study were: dental Class II division 1 malocclusion, hypo-divergent skeletal pattern, late mixed or permanent dentition. We analyzed with the use of stable bone structure (ASCB) at two different times: pre-treatment (T0) and post-treatment (T1) after 24 months. Inter-group differences were evaluated with paired samples t-test at the P<0.05 level. RESULTS: No statistical significant differences were found in cephalometric skeletal measurements, whereas dental parameters showed a significant different overjet, which was significantly reduced (6 mm at T0 vs. 5 mm at T1) in our series. CONCLUSIONS: In ABPFA group, the treatment effects were reduce mainly Class II malocclusion, overjet and overbite alteration. This appliance seems to suggest a significant beneficial effect in mandible displacement by reducing the counter clockwise rotation of the mandible, which is further confirmed by the almost absence of modifications of ArGoMe and SNGoMe angles. The ABPFA is particularly suitable to reduce the non-desirable dental effects represented by lower incisors pro inclination, and upper incisors retro-inclination. Key words:Orthodontics, Functional orthodontics, Class II malocclusion, Anterior bite plane functional appliance.

Post-orthodontic position of lower incisors and gingival recession: A retrospective study.

BACKGROUND: To evaluate if changes in lower incisor position following orthodontic treatment are correlated with development of gingival recessions. MATERIAL AND METHODS: Pre- and post-treatment digital models and lateral cephalograms of 22 subjects were collected retrospectively. The clinical crown length, gingival scallop, and papilla height of the central lower incisor were measured along with the cephalometric incisor's inclination, the distance from the mandibular plane, and the distance between the Infradentale and Menton points. Statistical correlations between gingival and cephalometric variables were studied. In addition, two groups were defined based on the post-treatment incisor inclination value ('normal' or 'proclined') and compared. RESULTS: The incisor inclination was correlated with the change in gingival scallop and papilla height. Moreover, there was a statistically significant difference in clinical crown height and gingival scallop between the 'normal' group and the 'proclined' group. CONCLUSIONS: Changes in lower incisor position, especially an excessive proclination, after orthodontic treatment may play a role in the development of gingival recession. Key words:Orthodontic treatment, Incisor inclination, IMPA, Gingival recession, Alveolar bone.

Cephalometric evaluation of tongue position and airway remodelling in children treated with swallowing occlusal contact intercept appliance (S.O.C.I.A.).

INTRODUCTION: Facial growth changes the position of the jaws (in particular vertical position of the maxilla and antero-posterior position of the mandible) and may, in turn, modify the position of the tongue and the hyoid bone, thus, generating modifications of the upper airway space. In the present paper, effects on upper airway space and tongue position of a new functional appliance, the swallowing occlusal contact intercept appliance (SOCIA) have been investigated. MATERIALS AND METHODS: Retrospective cephaolmetric study of twenty-four children (mean age 9.46±1.60) with hyperdivergent Class II malocclusion with mandibular retrusion and atypical deglutition, was performed on radiographs taken before and after 24 months treatment with "SOCIA" appliance. The variables considered in this study, and analysed by means of a Paired t-test with a 5% level of significance, included the distance between the base of epiglottis (EB) and the tip of the tongue (TT), the distance from the tongue dorsum to EB-TT (TGH), the distance between the posterior nasal spine PNS and EB (VAL), SPAS, MAS and IAS (i.e. superior, medium and inferior pharyngeal airspace width). RESULTS: Our findings showed a significant increase in tongue length (TT-EB) and tongue height (TGH); thus, confirming the reposition of the tongue from a lower posture to its physiological position onto the palatal spot. These modifications of the tongue posture had effects on the upper airway space. The most important modifications were observed in SPAS, with a significant 5.9 mm increase. Some increase was found also for MAS (0.83 mm) and IAS (1.1 mm) but without statistical significance. A significant increase (7.75 mm) was also found for VAL, probably as a result of the augmentation of posterior facial height. CONCLUSIONS: SOCIA appliance is capable to improve tongue position and the superior posterior airway space, and, consequently, to improve deglutition, phonation and respiratory function.