A Sequence-Defined ABC Dendritic Macromolecule with Amino Acid Peripheral Functionality via Iterative Chemoselective Reactions.

Chemoselective reactions allow near-precision control over the polymer composition and topology to create sequence-controlled polymers with similar secondary and tertiary structures to those found in proteins. Dendrimers are recognized as well-defined macromolecules with the potential to mimic protein surface functionality due to the large number of functional groups available at its periphery with the internal structure acting as the support scaffold. Transitioning from using small-molecule dendrimers to dendritic macromolecules will not only allow retention of the high peripheral functionality but also provide an internal scaffold with a desired polymer composition within each generational layer. Here, we exemplify a systematic approach to creating a dendritic macromolecule with the placement of different polymer building blocks in precise locations within the internal structure and the placement of three different amino acid moieties clustered at the periphery. The synthesis of this ABC dendritic macromolecule was accomplished through iterative chemoselective reactions.

Nonionic Polymer with Flat Upper Critical Solution Temperature Behavior in Water.

We rationally designed a monomer that when polymerized formed a well-defined nonionic polymer [poly(2-(methacryloyloxy) ethylureido glycinamide), PMEGA] by reversible addition fragmentation chain transfer with a flat and tunable upper critical solution temperature (UCST) in water. The monomer was made in one pot from commercially available compounds and with ease of purification. Strong hydrogen-bonding side groups on the polymer produced sharp coil-to-globule transitions upon cooling below its UCST. Ideal random copolymers produced with butyl methacrylate also showed flat UCST profiles, in which the UCST increased with a greater butyl methacrylate copolymer composition from 7 to 65 °C. In the presence of NaCl, the UCST decreased linearly with NaCl concentration due to the "salting-in" effect, and it was found that the slopes from the linear decrease of UCST were nearly identical for all copolymer compositions. This new polymer and its copolymers support the hypothesis that strong hydrogen bonding between the side groups allowed the flat UCST to be readily tuned with a high level of predictability. We postulate that this polymer system may provide wide biological applicability similar to that found for the well-used flat lower critical solution temperature (LCST) of poly(N-isopropylacrylamide).

Surface Inactivation of Highly Mutated SARS-CoV-2 Variants of Concern: Alpha, Delta, and Omicron.

Continued SARS-CoV-2 transmission among the human population has meant the evolution of the virus to produce variants of increased infectiousness and virulence, coined variants of concern (VOCs). The last wave of pandemic infections was driven predominantly by the delta VOC, but because of continued transmission and adaptive mutations, the more highly transmissible omicron variant emerged and is now dominant. However, due to waning immunity and emergence of new variants, vaccines alone cannot control the pandemic. The application of an antiviral coating to high-touch surfaces and physical barriers such as masks are an effective means to inactivate the virus and their spread. Here, we demonstrate an environmentally friendly water-borne polymer coating that can completely inactivate SARS-CoV-2 independent of the infectious variant. The polymer was designed to target the highly glycosylated spike protein on the virion surface and inactivate the virion by disruption of the viral membrane through a nano-mechanical process. Our findings show that, even with low amounts of coating on the surface (1 g/m2), inactivation of alpha, delta, and omicron VOCs and degradation of their viral genome were complete. Furthermore, our data shows that the polymer induces little to no skin sensitization in mice and is non-toxic upon oral ingestion in rats. We anticipate that our transparent polymer coating can be applied to face masks and many other surfaces to capture and inactivate the virus, aiding in the reduction of SARS-CoV-2 transmission and evolution of new variants of concern.

Polymer Colloids: Synthesis Fundamentals to Applications.

This special issue of Biomacromolecules highlights research from The International Polymer Colloid Group (IPCG), which was founded in 1972 as a forum for the exchange of ideas and emerging research activities for scientists and engineers from both academia and industry who study or use polymer colloids. The increasing relevance of polymeric structures with colloidal dimensions to biomacromolecules research provided the impetus for organizing this special issue. The IPCG is composed of over 120 researchers from over 20 countries who are elected to membership. Activities comprise annual symposia including a biennial International Polymer Colloid Group Research Conference and a semiannual newsletter that incorporates a summary of recent (including unpublished) research results from our members.

UV-Cross-Linked Polymer Nanostructures with Preserved Asymmetry and Surface Functionality.

Polymer nanostructures can be designed with tailored properties and functions by varying their shape, chemical compositions, and surface functionality. The poor stability of these soft materials in solvent other than water can be overcome by introducing cross-links. However, cross-linking complex morphologies remains a challenge. Here, by using the temperature-directed morphology transformation method, we show that the symmetric (nanoworm) and asymmetric (tadpole) nanostructure cores can be UV-cross-linked through the coupling of styrene and para-chlorostyrene units found in the core by irradiating at 254 nm for up to 5 h. Once cross-linked, these nanostructures maintain their structure in organic solvent, further allowing us to couple on a water-insoluble pro-fluorescent probe with high efficiency.

Therapeutic Delivery of Polymeric Tadpole Nanostructures with High Selectivity to Triple Negative Breast Cancer Cells.

Targeted delivery of therapeutic drugs using nanoparticles to the highly aggressive triple negative breast cancer cells has the potential to reduce side effects and drug resistance. Cell entry into triple negative cells can be enhanced by incorporating cell binding receptor molecules on the surface of the nanoparticles to enhance receptor-mediated entry pathways, including clatherin or caveolae endocytosis. However, for highly aggressive cancer cells, these pathways may not be effective, with the more rapid and high volume uptake from macropinocytosis or phagocytosis being significantly more advantageous. Here we show, in the absence of attached cell binding receptor molecules, that asymmetric polymer tadpole nanostructure coated with a thermoresponsive poly(N-isopropylacrylamide) polymer with approximately 50% of this polymer in a globular conformation resulted in both high selectivity and rapid uptake into the triple breast cancer cell line MDA-MB-231. We found that the poly(N-isopropylacrylamide) surface coating in combination with the tadpole's unique shape had an almost 15-fold increase in cell uptake compared to spherical particles with the same polymer coating, and that the mode of entry was most likely through phagocytosis. Delivery of the tadpole attached with doxorubicin (a prodrug, which can be released at pHs < 6) showed a remarkable 10-fold decrease in the IC50 compared to free doxorubicin. It was further observed that cell death was primarily through late apoptosis, which may allow further protection from the body's own immune system. Our results demonstrate that by tuning the chemical composition, polymer conformation and using an asymmetric-shaped nanoparticle, both selectivity and effective delivery and release of therapeutics can be achieved, and such insights will allow the design of nanoparticles for optimal cancer outcomes.

Temperature-Induced Formation of Uniform Polymer Nanocubes Directly in Water.

Conventional self-assembly methods of block copolymers in cosolvents (i.e., usually water and organic solvents) has yet to produce a pure and monodisperse population of nanocubes. The requirement to assemble a nanocube is for the second block to have a high molecular weight. However, such high molecular weight block copolymers usually result in the formation of kinetically trapped nanostructures even with the addition of organic cosolvents. Here, we demonstrate the rapid production of well-defined polymer nanocubes directly in water by utilizing the thermoresponsive nature of the second block (with 263 monomer units), in which the block copolymer was fully water-soluble below its lower critical solution temperature (LCST) and would produce a pure population of nanocubes when heated above this temperature. Incorporating a pH-responsive monomer in the second block allowed us to control the size of the nanocubes in water with pH and the LCST of the block copolymer. We then used the temperature and pH responsiveness to create an adaptive system that changes morphology when using a unique fuel. This fuel (H2O2 + MnO2) is highly exothermic, and the solution pH increases with the consumption of H2O2. Initially, a nonequilibrium spherical nanostructure formed, which transformed over time into nanocubes, and by controlling the exotherm of the reaction, we controlled the time for this transformation. This block copolymer and the water-only method of self-assembly have provided some insights into designing biomimetic systems that can readily adapt to the environmental conditions.

Replacing Cu(II)Br2 with Me6-TREN in Biphasic Cu(0)/TREN Catalyzed SET-LRP Reveals the Mixed-Ligand Effect.

The mixed-ligand system consisting of tris(2-aminoethyl)amine (TREN) and tris(2-dimethylaminoethyl)amine (Me6-TREN) during the Cu(0) wire-catalyzed single electron transfer-living radical polymerization (SET-LRP) of methyl acrylate (MA) in "programmed" biphasic mixtures of the dipolar aprotic solvents NMP, DMF, and DMAc with H2O is reported. Kinetic and chain end analysis studies by NMR and MALDI-TOF before and after thio-bromo "click" reaction demonstrated that Me6-TREN complements and makes the less expensive TREN a very efficient ligand in the absence of externally added Cu(II)Br2. Statistical analysis of the kinetic data together with control experiments demonstrated that this mixed-ligand effect enhanced the apparent rate constant of propagation, monomer conversion, and molecular weight control. The most efficient effect was observed at a 1/1 molar ratio between these two ligands, suggesting that in addition to a fast exchange between the two ligands, a new single dynamic ligand generated by hydrogen bonding may be responsible for the mixed ligand observed.

Biodistribution of PNIPAM-Coated Nanostructures Synthesized by the TDMT Method.

Targeting the spleen with nanoparticles could increase the efficacy of vaccines and cancer immunotherapy, and have the potential to treat intracellular infections including leishmaniasis, trypanosome, splenic TB, AIDS, malaria, and hematological disorders. Although, nanoparticle capture in both the liver and spleen has been well documented, there are only a few examples of specific capture in the spleen alone. It is proposed that the larger the nanoparticle size (>400 nm) the greater the specificity and capture within the spleen. Here, we synthesized five nanostructures with different shapes (ranging from spheres, worms, rods, nanorattles, and toroids) and poly( N-isopropylacrylamide), PNIPAM, surface coating using the temperature-directed morphology transformation (TDMT) method. Globular PNIPAM (i.e., water insoluble) surface coatings have been shown to significantly increase cell uptake and enhanced enzyme activity. We incorporated a globular component of PNIPAM on the nanostructure surface and examined the in vivo biodistribution of these nanostructures and accumulation in various tissues and organs in a mouse model. The in vivo biodistribution as a function of time was influenced by the shape and PNIPAM surface composition, in which organ capture and retention was the highest in the spleen. The rods (∼150 nm in length and 15 nm in width) showed the highest capture and retention of greater than 35% to the initial injection amount compared to all other nanostructures. It was found that the rods specifically targeted the cells in the red pulp region of the spleen due to the shape and PNIPAM coating of the rod. This remarkable accumulation and selectively into the spleen represents new nanoparticle design parameters to develop new splenotropic effects for vaccines and other therapeutics.

Uniform Symmetric and Asymmetric Polymer Nanostructures via Directed Chain Organization.

Polymer nanostructures can be designed with specific properties and functions, such as controlled shape, size, chemical composition, and adaptive ability to change shape or size in response to environmental cues. Precise control to organize polymer chains into uniform nonspherical symmetric and asymmetric nanostructures and at scale remains a synthetic challenge. Here, by using the temperature-directed morphology transformation (TDMT) method we show through a systematic organization of polymer chains the synthesis of well-defined asymmetric (i.e., tadpole) and symmetric (i.e., worm) nanostructures in water at high polymer concentrations. This method further allowed the production of tadpoles with controlled and uniform tail lengths, ranging from 200 to 800 nm. The organization of chains could be driven by environmental conditions to produce adaptive nanostructure systems.

Influence of Constraints within a Cyclic Polymer on Solution Properties.

Cyclic polymers with internal constraints provide new insight into polymer properties in solution and bulk and can serve as a model system to explain the stability and mobility of cyclic biomacromolecules. The model system used in this work consisted of cyclic polystyrene structures, all with a nearly identical molecular weight, designed with 0-3 constraints located at strategic sites within the cyclic polymer, with either 4 or 6 branch points. The total number of branch points (or arms) within the cyclic ranged from 0 to 18. Molecular dynamic (MD) simulations showed that as the number of arms increased within the cyclic structure, the radius of gyration and the hydrodynamic radius generally decreased, suggesting the greater number of constraints resulted in a more compact polymer chain. The simulations further showed that the excluded volume was much greater for the cyclics compared to a linear polymer at the same molecular weight. The spirocyclic, a structure consisting of three rings joined in series, showed significant excluded volume effects in agreement with experimental data; the reason for which is unclear at this stage. Interestingly, under a size exclusion chromatography flow, the radius of hydration for all the cyclic structures increased compared with the DLS data, and could be explained from the greater swelling of the rings perpendicular to the flow found from previous simulations on rings. This data suggests that the greater compactness, greater excluded volume and structural rearrangements under flow of constrained cyclic polymers could be used to provide a physical basis for understanding greater stability and activity of cyclic biological macromolecules.

Multiantigenic peptide-polymer conjugates as therapeutic vaccines against cervical cancer.

Immunotherapy is one of the most promising strategies for the treatment of cancer. Human papillomavirus (HPV) is responsible for virtually all cases of cervical cancer. The main purpose of a therapeutic HPV vaccine is to stimulate CD8(+) cytotoxic T lymphocytes (CTLs) that can eradicate HPV infected cells. HPV oncoproteins E6 and E7 are continuously expressed and are essential for maintaining the growth of HPV-associated tumor cells. We designed polymer-based multi-antigenic formulations/constructs that were comprised of the E6 and E7 peptide epitopes. We developed an N-terminus-based epitope conjugation to conjugate two unprotected peptides to poly tert-butyl acrylate. This method allowed for the incorporation of the two antigens into a polymeric dendrimer in a strictly equimolar ratio. The most effective formulations eliminated tumors in up to 50% of treated mice. Tumor recurrence was not observed up to 3months post initial challenge.

Multifunctional nanoworms and nanorods through a one-step aqueous dispersion polymerization.

Producing synthetic soft worm and rod structures with multiple chemical functionalities on the surface would provide potential utility in drug delivery, nanoreactors, tissue engineering, diagnostics, rheology modifiers, enzyme mimics, and many other applications. Here, we have synthesized multifunctional worms and rods directly in water using a one-step reversible addition-fragmentation chain transfer (RAFT)-mediated dispersion polymerization at high weight fractions of polymer (>10 wt %). The chain-end functionalities included alkyne, pyridyl disulfide, dopamine, ß-thiolactone, and biotin groups. These groups could further be converted or coupled with biomolecules or polymers. We further demonstrated a nanorod colorimetric system with good control over the attachment of fluorescent probes.

Interaction of human arylamine N-acetyltransferase 1 with different nanomaterials.

Humans are exposed to nanoparticles in the environment as well as those in nanomaterials developed for biomedical applications. However, the safety and biologic effects of many nanoparticles remain to be elucidated. Over the past decade, our understanding of the interaction of proteins with various nanomaterials has grown. The protein corona can determine not only how nanoparticles interact with cells but also their biologic effects and toxicity. In this study, we describe the effects that several different classes of nanoparticles exert on the enzymatic activity of the cytosolic protein human arylamine N-acetyltransferase 1 (NAT1), a drug-metabolizing enzyme widely distributed in the body that is also responsible for the activation and detoxification of known carcinogens. We investigated three metal oxides (zinc oxide, titanium dioxide, and silicon dioxide), two synthetic clay nanoparticles (layered double hydroxide and layered silicate nanoparticles), and a self-assembling thermo-responsive polymeric nanoparticle that differ in size and surface characteristics. We found that the different nanoparticles induced very different responses, ranging from inhibition to marked enhancement of enzyme activity. The layered silicates did not directly inactivate NAT1, but was found to enhance substrate-dependent inhibition. These differing effects demonstrate the multiplicity of nanoparticle-protein interactions and suggest that enzyme activity may be compromised in organs exposed to nanoparticles, such as the lungs or reticulo-endothelial system.

Thermoresponsive worms for expansion and release of human embryonic stem cells.

The development of robust suspension cultures of human embryonic stem cells (hESCs) without the use of cell membrane disrupting enzymes or inhibitors is critical for future clinical applications in regenerative medicine. We have achieved this by using long, flexible, and thermoresponsive polymer worms decorated with a recombinant vitronectin subdomain that bridge hESCs, aiding in hESC's natural ability to form embryoid bodies (EBs) and satisfying their inherent requirement for cell-cell and cell-extracellular matrix contact. When the EBs reached an optimal upper size where cytokine and nutrient penetration becomes limiting, these long and flexible polymer worms facilitated EB breakdown via a temperature shift from 37 to 25 °C. The thermoresponsive nature of the worms enabled a cyclical dissociation and propagation of the cells. Repeating the process for three cycles (over eighteen days) provided a >30-fold expansion in cell number while maintaining pluripotency, thereby providing a simple, nondestructive process for the 3D expansion of hESC.

Intracellular trafficking pathways for nuclear delivery of plasmid DNA complexed with highly efficient endosome escape polymers.

Understanding the pathways for nuclear entry could see vast improvements in polymer design for the delivery of genetic materials to cells. Here, we use a novel diblock copolymer complexed with plasmid DNA (pDNA) to determine both its cellular entry and nuclear pathways. The diblock copolymer (A-C3) is specifically designed to bind and protect pDNA, release it at a specific time, but more importantly, rapidly escape the endosome. The copolymer was taken up by HEK293 cells preferentially via the clathrin-mediated endocytosis (CME) pathway, and the pDNA entered the nucleus to produce high gene expression levels in all cells after 48 h, a similar observation to the commercially available polymer transfection agent, PEI Max. This demonstrates that the polymers must first escape the endosome and then mediate transport of pDNA to the nucleus for occurrence of gene expression. The amount of pDNA within the nucleus was found to be higher for our A-C3 polymer than PEI Max, with our polymer delivering 7 times more pDNA than PEI Max after 24 h. We further found that entry into the nucleus was primarily through the small nuclear pores and did not occur during mitosis when the nuclear envelope becomes compromised. The observation that the polymers are also found in the nucleus supports the hypothesis that the large pDNA/polymer complex (size ~200 nm) must dissociate prior to nucleus entry and that cationic and hydrophobic monomer units on the polymer may facilitate active transport of the pDNA through the nuclear pore.

Polymer nanocarrier system for endosome escape and timed release of siRNA with complete gene silencing and cell death in cancer cells.

An influenza virus-inspired polymer mimic nanocarrier was used to deliver siRNA for specific and near complete gene knockdown of an osteoscarcom cell line (U-2SO). The polymer was synthesized by single-electron transfer living radical polymerization (SET-LRP) at room temperature to avoid complexities of transfer to monomer or polymer. It was the only LRP method that allowed good block copolymer formation with a narrow molecular weight distribution. At nitrogen to phosphorus (N/P) ratios of equal to or greater than 20 (greater than a polymer concentration of 13.8 µg/mL) with polo-like kinase 1 (PLK1) siRNA gave specific and near complete (>98%) cell death. The polymer further degrades to a benign polymer that showed no toxicity even at polymer concentrations of 200 µg/mL (or N/P ratio of 300), suggesting that our polymer nanocarrier can be used as a very effective siRNA delivery system and in a multiple dose administration. This work demonstrates that with a well-designed delivery device, siRNA can specifically kill cells without the inclusion of an additional clinically used highly toxic cochemotherapeutic agent. Our work also showed that this excellent delivery is sensitive for the study of off-target knockdown of siRNA.

Fine tuning the disassembly time of thermoresponsive polymer nanoparticles.

Timed-released disassembly of nanoparticles without a remote trigger or environmental cues is demonstrated in this work. The reversible addition-fragmentation chain transfer (RAFT) polymerization allowed the fine-tuning of the chemical composition in the diblock copolymers, in which the first block consisted of a hydrophilic monomer (DMA) and the second random block consisted of three different monomers: (a) the thermoresponsive NIPAM, (b) the self-catalyzed hydrolyzable DMAEA, and (c) the hydrophobic BA. These diblock copolymers were solubilized in water below the lower critical solution temperature (LCST) of the thermoresponsive second block, and heated to 37 °C (i.e., >LCST) to form small micelle nanoparticles with a narrow particle size distribution. As DMAEA hydrolyzed to acrylic acid groups, the LCST of the diblock increased, and the time at the start of micelle disassembly (t(start)) corresponded to the point where the LCST was equal to the solution temperature (i.e., 37 °C). The high water content in the PNIPAM core allowed an even degradation of the core over time. The copolymer composition allowed fine control over t(start), as this time was linearly dependent upon the BA units in the second block. These nanoparticles could also be designed to be stable (i.e., not disassemble) over a wide pH range or disassemble below a pH of 7.3. Additionally, the time from the start of disassembly to full unimer formation (t(degrade)) could be controlled by the amount of DMAEA units in the second block. A longer t(degrade) (~5.5 h) was found when the number of DMAEA units was 42 compared to t(degrade) of 1.1 h for 25 units. The nanoparticles designed in this work, through fine control of the polymer chemical composition, have the potential for drug delivery purposes for timed-release of drugs and prodrugs and other wide-ranging applications where timed-release would be beneficial.

Self-adjuvanting polymer-peptide conjugates as therapeutic vaccine candidates against cervical cancer.

Dendrimers are structurally well-defined, synthetic polymers with sizes and physicochemical properties often resembling those of biomacromolecules (e.g., proteins). As a result, they are promising candidates for peptide-based vaccine delivery platforms. Herein, we established a synthetic pathway to conjugate a human papillomavirus (HPV) E7 protein-derived peptide antigen to a star-polymer to create a macromolecular vaccine candidate to treat HPV-related cancers. These conjugates were able to reduce tumor growth and eradicate E7-expressing TC-1 tumors in mice after a single immunization, without the help of any external adjuvant.

Timed-release polymer nanoparticles.

Triggered-release of encapsulated therapeutics from nanoparticles without remote or environmental triggers was demonstrated in this work. Disassembly of the polymer nanoparticles to unimers at precise times allowed the controlled release of oligo DNA. The polymers used in this study consisted of a hydrophilic block for stabilization and second thermoresponsive block for self-assembly and disassembly. At temperatures below the second block's LCST (i.e., below 37 °C for in vitro assays), the diblock copolymer was fully water-soluble, and when heated to 37 °C, the polymer self-assembled into a narrow size distribution of nanoparticles with an average diameter of approximately 25 nm. The thermoresponsive nature of the second block could be manipulated in situ by the self-catalyzed degradation of cationic 2-(dimethylamino)ethyl acrylate (DMAEA) units to negatively charged acrylic acid groups and when the amount of acid groups was sufficiently high to increase the LCST of the second block above 37 °C. The disassembly of the nanoparticles could be controlled from 10 to 70 h. The use of these nanoparticles as a combined therapy, in which one or more agents can be released in a predetermined way, has the potential to improve the personal point of care treatment of patients.