Universal Stretchable Conductive Cellulose/PEDOT:PSS Hybrid Films for Low Hysteresis Multifunctional Stretchable Electronics.

Skin-attachable conductive materials have attracted significant attention for use in wearable devices and physiological monitoring applications. Soft, skin-like conductive films must have excellent mechanical and electrical characteristics with on-skin conformability, stretchability, and robustness to detect body motion and biological signals. In this study, a conductive, stretchable, hydro-biodegradable, and highly robust cellulose/poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hybrid film is fabricated. Through the synergetic interplay of a conductivity enhancer, nonionic fluorosurfactant, and surface modifier, the mechanical and electrical properties of the stretchable hybrid film are greatly improved. The stretchable cellulose/PEDOT:PSS hybrid film achieves a limited resistance change of only 1.21-fold after 100 stretch-release cycles (30% strain) with exceptionally low hysteresis, demonstrating its great potential as a stretchable electrode for stretchable electronics. In addition, the film shows excellent biodegradability, promising environmental friendliness, and safety benefits. High-performance stretchable cellulose/PEDOT:PSS hybrid films, which have high biocompatibility and sensitivity, are applied to human skin to serve as on-skin multifunctional sensors. The conformally mounted on-skin sensors are capable of continuously monitoring human physiological signals, such as body motions, drinking, respiration rates, vocalization, humidity, and temperature, with high sensitivity, fast responses, and low power consumption (21 µW). The highly conductive hybrid films developed in this study can be integrated as both stretchable electrodes and multifunctional healthcare monitoring sensors. We believe that the highly robust stretchable, conductive, biodegradable, skin-attachable cellulose/PEDOT:PSS hybrid films are worthy candidates as promising soft conductive materials for stretchable electronics.

Wrinkled, dual-scale structures of diamond-like carbon (DLC) for superhydrophobicity.

We present a simple two-step method to fabricate dual-scale superhydrophobic surfaces by using replica molding of poly(dimethylsiloxane) (PDMS) micropillars, followed by deposition of a thin, hard coating layer of a SiO(x)-incorporated diamond-like carbon (DLC). The resulting surface consists of microscale PDMS pillars covered by nanoscale wrinkles that are induced by residual compressive stress of the DLC coating and a difference in elastic moduli between DLC and PDMS without any external stretching or thermal contraction on the PDMS substrate. We show that the surface exhibits superhydrophobic properties with a static contact angle over 160 degrees for micropillar spacing ratios (interpillar gap divided by diameter) less than 4. A transition of the wetting angle to approximately 130 degrees occurs for larger spacing ratios, changing the wetting from a Cassie-Cassie state (C(m)-C(n)) to a Wenzel-Cassie state (W(m)-C(n)), where m and n denote micro- and nanoscale roughness, respectively. The robust superhydrophobicity of the Cassie-Cassie state is attributed to stability of the Cassie state on the nanoscale wrinkle structures of the hydrophobic DLC coating, which is further explained by a simple mathematical theory on wetting states with decoupling of nano- and microscale roughness in dual scale structures.

Subwavelength Hollow-Nanopillared Glass with Gradient Refractive Index for Ultralow Diffuse Reflectance and Antifogging.

Nanostructured glass with subwavelength hollow nanopillars of diameters of sub-65 nm was fabricated, showing high optical transmittance and ultralow diffuse reflectance. A simple process involving single-step plasma etching was used on a glass slide coated with a SiO2 sacrificial film. First, SiO2 nanodot structures were formed using plasma-induced anisotropic etching with CF4 plasma. The SiO2 nanodot array then became a secondary etching mask to form hollow nanopillars on the glass. The hollow structures formed at the upper part reaching up to the apex of the nanopillar had a lower solid fraction, while the lower part had a higher fraction. The refractive index (RI) gradually increased from 1.09 (near the value for air) to 1.42 (near the value for glass). Geometry-induced RI gradient enhanced light transmi, while it significantly reduced diffuse reflectance, particularly in the shorter wavelengths, thus suppressing the haziness or milky appearance of the nanostructured glass. Superhydrophilic and antifogging properties of nanostructured glasses and dental mirrored glasses were also demonstrated with water spraying and exhaled breath tests. Results showed that the wettability was enhanced in hydrophilicity and antifogging property by both the hydrophilic nature of the glass and the newly formed nanostructures. The nanostructured, superhydrophilic glass was also found to have easy cleaning nature against fine sand dust adhesion by simply blowing air or spraying water. Results of this study showed that such a hollow-pillared glass surface with gradient RI and special wettability could be applied in a variety of optical and optoelectronic applications requiring superwetting, such as optical windows for solar cell panels, display panels, light-emitting diodes, and medical devices even with curved surfaces.

An angled nano-tunnel fabricated on poly(methyl methacrylate) by a focused ion beam.

Angled nano-scale tunnels with high aspect ratio were fabricated on poly(methyl methacrylate) (PMMA) using a focused ion beam (FIB). The fabrication parameters such as ion fluence, incidence angle, and acceleration voltage of the Ga(+) ion beam were first studied on the PMMA surface to explore the formation of the nano-scale configurations such as nano-holes and cones with diameter in the range of 50-150 nm at an ion beam acceleration voltage of 5-20 kV. It was also found that the PMMA surface exposed to FIB was changed into an amorphous graphitic structure. Angled nano-scale tunnels were fabricated with high aspect ratio of 700-1500 nm in depth and 60 nm in mean diameter at an ion beam acceleration voltage of 5 kV and under a specific ion beam current. The angle of the nano-tunnels was found to follow the incident angle of the ion beam tilted from 0 degrees to 85 degrees , which has the potential for creating a mold for anisotropic adhesives by mimicking the hairs on a gecko's feet.

Multifunctional composite coating as a wear-resistant layer for the bearing in total hip joint replacement.

In this study, we developed Ti-TiN composite coatings with fine lamellar structures for use as an enhanced wear-resistant layer between the bearing components of the polymer-lined acetabular cup and the metal femoral head of total hip joint replacements (THRs). A plasma spraying deposition method was used to apply the composite coatings, and the thickness of TiN layer in the composite could be controlled by varying the flow rate of N(2) atmospheric gas. The surface properties, such as roughness and hardness, were analyzed, and the friction coefficient (µ) and wear rate (k) were measured using a bovine serum wear test. A biocompatibility test was performed to evaluate the toxicity of the composite coatings. Our experimental results reveal that the friction and wear resistance of composite coatings is superior to that of the metallic implant materials, and they have a higher level of fracture toughness as compared with other ceramic coatings because of a good balance between the hardness of the TiN and the toughness of the Ti. Furthermore, these coatings possessed excellent biocompatibility. The experimental results also demonstrate that the improved wear properties can be attributed to a certain level of unavoidable porosity that is due to the rapid solidification of liquid droplets during the plasma spraying process. The pores in the coating surface play an important role as a lubricant (bovine serum) reservoir, reducing the actual contact area and friction losses.