The effect of combination treatment of CO2-laser irradiation and tetracalcium phosphate/dicalcium phosphate anhydrate on dentinal tubules blockage: an in vitro study.

The aim of this study was the evaluation of the in vitro efficacy of a carbon dioxide (CO2) laser, a tetracalcium phosphate/dicalcium phosphate anhydrate (TP/DP) desensitizer and the combination of the desensitizer and additional CO2 laser irradiation as a treatment modality for cervical dentin hypersensitivity. A total of 48 dental specimens, prepared from extracted human premolars and molars, were divided into four groups: a control group, a TP/DP desensitizer paste group, a CO2 laser (10.600-nm wavelength) group, and a paste and laser group. The specimens were coated with nail varnish except in the marked area and were then immersed in 2% methylene blue dye for 1 h. The specimens were then washed, dried, and cut longitudinally. Thereafter, photos of 40 dentin specimens were taken and evaluated. The area of penetration was assessed and reported as percentage of the dentin surface area. Additionally eight dental specimens were examined with the aid of a scanning electron microscope and evaluated. Significant differences in the penetration depth were found for all experimental groups compared to the control group. The lowest penetration area was detected in the paste-laser group (16.5%), followed by the laser (23.7%), the paste (48.5%), and the control group (86.2%). The combined treatment of the CO2 laser and a TP/DP desensitizer was efficient in sealing the dentinal surface and could be a treatment option for cervical dentin hypersensitivity.

Effects of customized CAD/CAM abutments on cytokine levels in peri-implant crevicular fluid during early implant healing: a pilot study.

OBJECTIVES: This study aimed to assess levels of biomarkers associated with inflammation and tissue destruction in peri-implant crevicular fluid (PICF) of implants provided with customized or standard healing abutments during early implant healing. MATERIALS AND METHODS: Thirty implants were placed in 22 patients with partial posterior edentulism. Subsequently, test group implants (n=15) received one-piece titanium abutments that were fabricated using computer-aided design/computer-aided manufacturing (CAD/CAM). Control group implants (n=15) were provided with standard abutments. PICF collection and standardized periapical radiographs were carried out at suture removal one week later, following crown delivery after 3 months and at 6 months. Expression of C-reactive protein (CRP), interferon-γ, tumor necrosis factor (TNF)-α, interleukin (IL)-1α, IL-1ß, IL-2, IL-4, IL-6, IL-8, IL-10, IL-12A, IL-17A, macrophage inflammatory protein (MIP)-1α, matrix metalloproteinase (MMP)-13, osteopontin, osteoactivin, Receptor Activator of NF-κB (RANK), and TGF-ß were analyzed using a multiplex ELISA kit. RESULTS: Both groups showed a significant decrease in protein expression of CRP, IL-1ß, IL-6, IL-8, MIP-1α, osteopontin, osteoactivin, and TGF-ß, while MMP-13 levels increased during the observation period. A rise in OPG and RANK levels was detected among customized abutments. Expression of CRP was higher, whereas IL-1ß, IL-1α, and MIP-1α were decreased in control compared to test group implants after 6 months. Marginal bone loss did not depend on abutment modality. CONCLUSIONS: Both abutment types showed distinctive temporal expression of inflammatory biomarkers during 6 months following implant placement. TRIAL REGISTRATION: ISRCTN98477184, registration date 18/05/2022 CLINICAL RELEVANCE: Customized healing abutments exert similar effects on inflammation during early implant healing compared to standard healing abutments.

Effects of enamel matrix derivative in nonsurgical periodontal therapy on pro-inflammatory profiles, microbial environment and clinical outcome: a randomized clinical trial.

OBJECTIVES: This study aimed to evaluate the impact of enamel matrix derivative (EMD) application following subgingival instrumentation of residual pockets in periodontitis patients on inflammatory host response, microbiological composition, and clinical outcome. METHODS: In this double-blinded randomized controlled trial, a total of 22 patients with generalized periodontitis stage III or IV presenting with ≥ 6 mm probing pocket depth (PPD) at re-evaluation after initial periodontal therapy were included. Participants were randomly allocated at a 1:1 ratio to subgingival instrumentation with (EMD +) or without (EMD-) non-surgical EMD application into the pocket. PPD, clinical attachment level (CAL), bleeding on probing (BoP), plaque index (PI), as well as a panel of pro-inflammatory cytokines and periodontal pathogen count in the gingival crevicular fluid (GCF) of the respective sites were evaluated at baseline (T0) and six months afterwards (T1). RESULTS: Both treatment groups showed a significant PPD reduction (EMD + 1.33 ± 1.15 mm, p < 0.001; EMD- 1.32 ± 1.01 mm, p < 0.001) as well as CAL gain (EMD + 1.13 ± 1.58 mm, p < 0.001; EMD- 0.47 ± 1.06 mm, p = 0.005) from T0 to T1. While no intergroup differences for PPD reduction were observed, CAL gain was higher in EMD + sites compared to EMD- (p = 0.009). No essential effects on cytokine expression as well as bacterial count were detected. CONCLUSIONS: Application of EMD as an adjunct to subgingival instrumentation of residual pockets yielded benefits regarding CAL gain; however, effects on PPD reduction, inflammatory cytokines, and bacterial count were negligible. TRIAL REGISTRATION: ClinicalTrials.gov (NCT04449393), registration date 26/06/2020. CLINICAL RELEVANCE: Based on the obtained results, additional non-surgical EMD application compared to subgingival instrumentation alone showed no clinically relevant effects on treatment outcome and underlying biological mechanisms.

Anti-apoptotic effects of human gingival mesenchymal stromal cells on polymorphonuclear leucocytes.

OBJECTIVES: Polymorphonuclear leucocytes (PMNs) constitute the first line of host defence and are crucial in maintaining periodontal health. Their survival and function are modulated by mesenchymal stromal cells (MSCs) from different origin. Gingival MSCs (GMSCs) play an important role in maintaining oral health and in the initial inflammatory response. The present study aimed to investigate the effects of GMSCs on PMNs apoptosis and reactive oxygen species (ROS) production. METHODS: PMNs were either directly incubated with untreated, interleukin (IL)-1ß- or tumour necrosis factor (TNF)-α-treated GMSCs or stimulated with their conditioned media. Resulting ROS production was evaluated by dichlorofluorescin diacetate staining, whereas PMNs apoptosis was assessed by Annexin V staining, followed by flow cytometry analysis. RESULTS: While conditioned media of untreated and TNF-α-treated GMSCs did not affect apoptosis of PMNs, it was significantly delayed by conditioned media of GMSCs treated with IL-1ß. In direct co-culture, GMSCs exerted anti-apoptotic effects on PMNs independently of the previous stimulation. However, the strongest impact was observed by IL-1ß-treated GMSCs. ROS production of PMNs was not influenced by GMSCs or their conditioned media. CONCLUSION: This study demonstrates for the first time the immunomodulatory properties of GMSCs towards PMNs, revealing that IL-1ß enhances anti-apoptotic effects of GMSCs.

Effect of vitamin D3 on the osteogenic differentiation of human periodontal ligament stromal cells under inflammatory conditions.

OBJECTIVES: Vitamin D3 is known to activate osteogenic differentiation of human periodontal ligament stromal cells (hPDLSCs). Recently, inflammatory stimuli were shown to inhibit the transcriptional activity of hPDLSCs, but their effect on vitamin D3 -induced osteogenic differentiation is not known. The present study aimed to investigate whether the effects of 1,25-dihydroxvitamin D3 (1,25(OH)2 D3 ) and 25-hydroxvitamin D3 (25(OH)D3 ) on the osteogenic differentiation of hPDLSCs are also altered under inflammatory conditions. Furthermore, the expression of osteogenesis-related factors by hPDLSCs under osteogenic conditions was assessed in the presence of inflammatory stimuli. MATERIALS AND METHODS: Primary hPDLSCs of six donors were cultured in osteogenic induction medium containing either 1,25(OH)2 D3 (0-10 nM) or 25(OH)D3 (0-100 nM) in the presence and absence of Porphyromonas gingivalis lipopolysaccharide (LPS) or Pam3CSK4 for 7, 14 and 21 days. Osteogenic differentiation of hPDLSCs was evaluated by analysis of mineralization as assessed by Alizarin Red S staining and gene expression levels of osteogenesis-related factors osteocalcin, osteopontin and runt-related transcription factor 2 (RUNX2) were analysed with qPCR. RESULTS: Treatment with 1,25(OH)2 D3 significantly enhanced the osteogenic differentiation of hPDLSCs and their expression of osteocalcin and osteopontin. The 1,25(OH)2 D3 -triggered expression of osteogenesis-related factors was significantly lower in the presence of Pam3CSK4, but not P. gingivalis LPS. None of the inflammatory stimuli had significant effects on the 1,25(OH)2 D3 -induced osteogenic differentiation. 25(OH)D3 neither affected gene expression levels nor osteogenic differentiation of hPDLSCs cultured in osteogenic induction medium. CONCLUSION: The results of this study indicate that inflammatory stimuli also diminish the 1,25(OH)2 D3 -induced expression of osteogenesis-related factors in hPDLSCs under osteogenic conditions, while having no effect on the osteogenic differentiation.

Effects of Er:YAG laser irradiation of different titanium surfaces on osteoblast response.

The aim of this in vitro study was to evaluate the effects of erbium-doped yttrium aluminum garnet (Er:YAG) laser irradiation on titanium surface topography and the proliferation and differentiation of osteoblasts using standard clinical treatment settings. Er:YAG laser irradiation at two levels ((1): 160 mJ, pulse at 20 Hz; (2): 80 mJ, pulse at 20 Hz) was applied to moderately rough and smooth titanium disks before MG-63 osteoblast-like cells were cultured on these surfaces. Titanium surface and cell morphology were observed by scanning electron microscopy. Cell proliferation/viability was measured by CCK-8 test. Gene expression of alkaline phosphatase (ALP), osteocalcin (OC), osteoprotegerin (OPG), receptor activator of nuclear factor kappa-B ligand (RANKL), and collagen type 1 was measured by qPCR, and OPG and OC protein production was determined by enzyme-linked immunosorbent assay. Treatment with Er:YAG laser at 160 mJ/20 Hz markedly caused heat-induced fusion of titanium and cell condensation on moderately rough surfaces, but not in smooth surfaces. MG-63 proliferation/viability decreased after 5 days in moderately rough surfaces. The expression of ALP, OC, OPG, and collagen type 1 was unaffected by laser treatment at 160 mJ/20. Laser irradiation at 80 mJ/20 Hz enhanced RANKL gene expression after 5 days in moderately rough surfaces. Study results suggest that Er:YAG laser irradiation at clinically relevant setting has no essential effect on osteogenic gene and protein expression of osteoblasts. However, surface structure, cell attachment, and proliferation are influenced by both treatment protocols, which implies that caution should be taken in the clinical treatment of peri-implant diseases when Er:YAG laser is used.

Effect of interdental brush design on plaque during nonsurgical periodontal therapy.

OBJECTIVE: The aim of this randomized controlled trial was to evaluate the interproximal cleaning efficacy of waist-shaped compared with straight soft interdental brushes in patients undergoing nonsurgical periodontal therapy. MATERIALS AND METHODS: Ten patients diagnosed with periodontitis stage II or III were scheduled for nonsurgical periodontal therapy. Baseline plaque control record (PCR), modified approximal plaque index (API), papillary bleeding index (PBI), probing pocket depth (PPD), and bleeding on probing (BOP) were evaluated. Four interdental spaces of equal sizes were determined, and baseline plaque indices (PI) were assessed on eight surfaces of the respective adjacent teeth, resulting in 640 measuring positions. Interdental brushes with a straight or waist-shaped design were randomly allocated to the right or left side, and patients received oral hygiene instructions. Follow-up measurements including PCR, API, PBI, and site-specific PI were performed during initial nonsurgical periodontal therapy sessions and reevaluation which was undertaken 8 weeks afterwards. RESULTS: PCR, API, and PBI decreased significantly compared with baseline at each time point (p < 0.001). PPD (waist-shaped, baseline 4 mm (range, 2-9 mm) vs. reevaluation 3 mm (range, 1-6 mm); p < 0.001; straight, baseline 4 mm (range, 2-10) vs. reevaluation 3 mm (range, 1-6) mm; p < 0.001) and BOP (p = 0.008) showed significant reduction in both groups. Sub-analysis of site-specific areas including line angles and interproximal areas revealed no significant reduction of plaque during the observation period between both brush designs. No difference between straight and waist-shaped brushes regarding PPD or BOP decrease was found. CONCLUSION: The efficacy of both interdental brush designs concerning plaque control in patients undergoing nonsurgical periodontal therapy was similar. CLINICAL RELEVANCE: The use of interdental brushes is essential for biofilm removal in patients during initial periodontal therapy, regardless of brush design. CLINICAL TRIAL REGISTRATION: ISRCTNregistry (#ISRCTN24498365), http://www.isrctn.com/ISRCTN24498365.

The impact of 3D-printed LAY-FOMM 40 and LAY-FOMM 60 on L929 cells and human oral fibroblasts.

OBJECTIVES: LAY-FOMM is a promising material for FDA-approved Fused Deposition Modeling (FDM) applications in drug delivery. Here we investigated the impact on oral cells. MATERIALS AND METHODS: We evaluated the impact of 3D-printed LAY-FOMM 40, LAY-FOMM 60, and biocompatible polylactic acid (PLA) on the activity of murine L929 cells, gingival fibroblasts (GF), and periodontal ligament fibroblasts (PDLF) using indirect (samples on cells), direct monolayer culture models (cells on samples), and direct spheroid cultures with resazurin-based toxicity assay, confirmed by MTT and Live-dead staining. The surface topography was evaluated with scanning electron microscopy. RESULTS: The materials LAY-FOMM 40 and LAY-FOMM 60 led to a reduction in resazurin conversion in L929 cells, GF, and PDLF, higher than the impact of PLA in indirect and direct culture models. Fewer vital cells were found in the presence of LAY-FOMM 40 and 60 than PLA, in the staining in both models. In the direct model, LAY-FOMM 40 and PLA showed less impact on viability in the resazurin-based toxicity assay than in the indirect model. Spheroid microtissues showed a reduction of cell activity of GF and PDLF with LAY-FOMM 40 and 60. CONCLUSION: Overall, we found that LAY-FOMM 40 and LAY-FOMM 60 can reduce the activity of L292 and oral cells. Based on the results from the PLA samples, the direct model seems more reliable than the indirect model. CLINICAL RELEVANCE: A material modification is desired in terms of biocompatibility as it can mask the effect of drugs and interfere with the function of the 3D-printed device.

Short-term results of the combined application of neodymium-doped yttrium aluminum garnet (Nd:YAG) laser and erbium-doped yttrium aluminum garnet (Er:YAG) laser in the treatment of periodontal disease: a randomized controlled trial.

OBJECTIVES: Nd:YAG and Er:YAG lasers have been previously used as an adjunct in periodontal therapy. The aim of this single-blinded randomized controlled clinical trial was to evaluate the efficacy of a combined application of Nd:YAG and Er:YAG laser irradiation in periodontal treatment. MATERIALS AND METHODS: Twenty-two patients with at least one site of ≥ 6 mm periodontal probing depth (PPD) after mechanical debridement with curettes and sonic instruments at periodontal reevaluation were included in the study. Patients were randomly allocated at a 1:1 ratio to either a combined Nd:YAG/Er:YAG laser therapy (test group) or a "turned off" laser therapy (control group). The Nd:YAG laser was used for periodontal pocket deepithelialization and to stabilize the resulting blood clot. The Er:YAG laser was primarily used for root surface modification. PPD (mm), clinical attachment level (CAL, mm), and bleeding on probing (BOP, +/-) at the site of laser treatment were evaluated at baseline and 2 months after treatment. RESULTS: The mean improvements from baseline to 2-month follow-up for PPD were significantly better in the laser group (2.05 ± 0.82 mm) compared to the control group (0.64 ± 0.90 mm; p = 0.001). Likewise, the gain in CAL was significantly better in the laser group (1.50 ± 1.10 mm) than in the control group (0.55 ± 1.01mm; p = 0.046). CONCLUSIONS: The combined application of Nd:YAG and Er:YAG laser irradiation as an adjunct to conventional non-surgical therapy showed a significant beneficial effect on periodontal treatment results. CLINICAL RELEVANCE: Combined Nd:YAG and Er:YAG laser irradiation could be a useful procedure additionally to conventional non-surgical periodontal therapy to improve periodontal treatment results. CLINICAL TRIAL REGISTRATION: ISRCTN registry #ISRCTN32132076.

Response of Human Mesenchymal Stromal Cells from Periodontal Tissue to LPS Depends on the Purity but Not on the LPS Source.

Human periodontal ligament stromal cells (hPDLSCs) and gingival mesenchymal stromal cells (hGMSCs) are resident mesenchymal stromal cells (MSCs) of the periodontal tissue. The lipopolysaccharide (LPS) from Porphyromonas gingivalis is structurally distinct from that of other Gram-negative bacteria, and earlier studies linked this structural difference to a distinct virulence activity and the ability to activate toll-like receptor 2 (TLR-2), besides TLR-4 as commonly occurring upon LPS challenge. Later studies, in contrast, argue that TLR-2 activation by P. gingivalis LPS is due to lipoprotein contamination. In the present study, we aimed to define the influence of structure versus purity of P. gingivalis LPS on the immune response of hPDLSCs and hGMSCs. Cells were stimulated with commercially available "standard" P. gingivalis LPS, "ultrapure" P. gingivalis LPS, or "ultrapure" Escherichia coli LPS, and the expression of interleukin- (IL-) 8, IL-6, monocyte chemoattractant protein- (MCP-) 1, TLR-2, and TLR-4 was evaluated. The contribution of TLR-4 to the LPS-induced response was assessed using the specific TLR-4 inhibitor TAK-242. "Standard" P. gingivalis LPS induced significantly higher IL-8, IL-6, and MCP-1 production compared to the "ultrapure" LPS preparations, with no significant difference detectable for "ultrapure" LPS from P. gingivalis and E. coli. By using TAK-242, the response of hPDLSCs and hGMSCs to "ultrapure" LPS preparations was effectively inhibited to the levels comparable to those of nonstimulated controls. In contrast, high levels of response to "standard" LPS were observed, even in the presence of TAK-242. Our data show that the response of MSCs from periodontal tissue to LPS depends more on the purity of the LPS preparation than on the LPS source. Even a small amount of contaminating lipoproteins can drastically enhance the hPDLSCs' and hGMSCs; responsiveness to P. gingivalis LPS, which might also contribute to the progression of periodontal disease.

The efficacy of ultrasonic and PIPS (photon-induced acoustic streaming) irrigation to remove artificially placed dentine debris plugs out of an artificial and natural root model.

The aim was to validate an artificial resin 'root canal wall groove model' (RCWGM) mimicking the situation of natural roots with a groove of identical dimensions on debris removal out of these grooves, and to evaluate Erbium 'laser-activated irrigation' (LAI) with two conical tips at PIPS (photon-induced photoacoustic streaming) settings, with different activation times and different root canal positions on debris removal out of the grooves. A split RCWGM was used (resin blocks and roots of maxillary canines) with a canal size 40/0.06. The grooves in the apical third were filled with stained dentinal debris. Seventeen irrigation protocols (n = 20) were used: syringe-needle irrigation (3× 20 s), manual dynamic activation (1× 60 s), ultrasonically activated irrigation (UAI) with 25/25 Irrisafe (3× 20 s) and LAI (2940 nm Er:YAG) with X-Pulse or PIPS tips at PIPS settings (20 mJ, 50 µs, 20 Hz) and with the fibre (IN) or (OUT) the canal: IN during 1× 20 s, and OUT during 1× 20 s, 2× 20 s, 3× 20 s, 30 s, 2× 30 s and 1× 60 s. The quantity of remaining dentine debris in the groove was evaluated on a numerical scale. Statistical analysis was performed by means of proportional odds logistic regression, equivalence testing and Wald tests. The level of significance was set at 0.05. Resin models and the RCWGM with natural teeth can be called equivalent (log odds ratio 0.185). There were mostly no statistically significant differences for debris removal between UAI and LAI (p > 0.05) and between LAI with PIPS and X-Pulse (p > 0.05). Although not statistically different, the numbers of completely cleaned grooves were higher with LAI than with UAI for a 1-min activation, confirming findings from other studies. There is no difference in cleaning efficacy between X-Pulse and PIPS tips at PIPS settings.

Influence of two different cement space settings and three different cement types on the fit of polymer-infiltrated ceramic network material crowns manufactured using a complete digital workflow.

OBJECTIVES: The study evaluates the influence of two spacer settings and three resin luting materials on the marginal and internal fit of polymer-infiltrated ceramic network (PICN) material crowns manufactured using a complete digital workflow. METHODS: Optical impressions of fifty identical dies were performed using the 3M scanner (software version 5.0.2). Twenty crowns were designed using Ceramill Mind (version 3.4.10.1163), from which ten with spacer setting of 50 µm (G1) and ten with 80 µm (G2). Thirty crowns (spacer setting of 50 µm) were divided into three groups corresponding to the resin materials used as follows: RelyX Unicem (RX), Variolink Esthetic (VLE), and Nexus 3 (NX3). All crowns were milled from Vita Enamic blocks. After micro-CT scanning, absolute marginal discrepancy (AMD), internal gap (IG), total cement space volume (TCV), and marginal porosities (VP) were measured. RESULTS: Significant difference was detected on the VP between the RX and NX3 group (p = 0.033). The mean values of all parameters were the following: AMD (µm): G1 182.6, G2 253.7, RX 210.8, VLE 195.5, NX3 186.6; IG (µm): G1 215.6, G2 173.1, RX 171.1, VLE 198.6, NX3 203; TCV (mm3): G1 22.9, G2 20.49, RX 17.57, VLE 17.49, NX3 20.59; VP (mm3): G1 0.26, G2 0.34, RX 0.32, VLE 0.46, NX3 0.54. CONCLUSIONS: Fit of PICN material crowns was not significantly influenced by increasing the spacer settings and cementation with different resin materials. Additionally, RelyX Unicem showed significantly less porosities as compared with Nexus3. CLINICAL RELEVANCE: Both 50 µm and 80 µm virtual spacer settings can be suggested for the manufacture of PICN crowns when Ceramill Mind (version 3.4.10.1163) is used. Furthermore, a self-adhesive system can be recommended for the cementation.

Contraction dynamics of dental pulp cell rod microtissues.

OBJECTIVES: The factors that contribute to the morphological changes of dental pulp cell-derived microtissues are unknown. Here, we investigated the contraction dynamics of rod-shaped microtissues derived from dental pulp cells and examined the underlying cell signaling pathways. METHODS: Human dental pulp cells were seeded into agarose molds to assemble into rod-shaped microtissues. Resazurin- and tetrazolium-based cytotoxicity assays, Live/Dead staining, and hematoxylin and eosin staining for histological evaluation of rods were performed. Rod contraction was evaluated and measured for a period of 10 days. The role of TGF-ß, phosphoinositide 3-kinase (PI3K)/AKT, and mitogen-activated protein kinase (MAPK) signaling pathway was analyzed. RESULTS: Dental pulp cells readily assembled into rods, maintaining the geometric shape for 48 h. Following this period, they condensed to form stable spheroidal structures that remained vital for 10 days from seeding. Inhibition of phosphoinositide 3-kinase signaling pathway by LY294002 significantly prolonged the diminution in the length of rods formed by dental pulp cells. TGF-ß and pharmacological inhibition of TGF-ß signaling did not show pronounced effects. CONCLUSION: Overall, dental pulp cells readily formed rod-shaped patterns of microtissues which, over a period of time, condensed into more stable spheroidal structures. Hence, technologies like bioprinting, using direct fabrication of microtissues need to consider the contraction dynamics. CLINICAL RELEVANCE: The field of regenerative endodontology will benefit from our findings as it can be applied as a novel platform to test the impact of pharmacological agents, biomaterials, and regenerative approaches including bioprinting.

The response of periodontal cells to kaolinite.

OBJECTIVES: The impact of kaolinite on human periodontal cells is yet unknown. The aim of the study was to assess the response of human periodontal cells to kaolinite. METHODS: Human periodontal cells were treated with kaolinite at reducing concentrations from 30 to 0.0015 mg/mL and with conditioned medium, which was depleted of kaolinite. Cell viability was evaluated with a resazurin-based toxicity assay, Live-Dead staining, and MTT assay and staining. The pro-angiogenic factors vascular endothelial growth factor (VEGF) and interleukin (IL)-6 and IL-8 were quantified via ELISA in periodontal fibroblasts. L-929, a standard cell-line used for cytotoxicity studies, served as control cell line. Composition of kaolinite was verified using energy-dispersive X-ray spectroscopy. RESULTS: Kaolinite in suspension but not in conditioned medium impaired cell viability dose-dependently. VEGF, IL-6, and IL-8 production was not substantially modulated by kaolinite or the conditioned medium in periodontal cells. CONCLUSION: Overall, kaolinite can decrease cell viability dose-dependently while conditioned medium showed no toxic effect. No pronounced impact of kaolinite on VEGF, IL-6, and IL-8 production was observed. This study provided first insights into the impact of kaolinite on human periodontal cells thereby inferring to the basis for the evaluation of kaolinite as a carrier in regenerative dentistry. CLINICAL RELEVANCE: Kaolinite, a clay mineral, is successfully used in medicine due to its favorable properties. Also, applications in conservative dentistry are described. However, the response of oral cells to kaolinite is still unclear. Here, we assessed the impact of kaolinite on human periodontal cells.

Periodontal treatment does not result in detectable platelet activation in vivo.

OBJECTIVES: Periodontitis is associated with systemic inflammation, elevated platelet activation and enhanced risk for cardiovascular diseases, while periodontal treatment reduces tissue inflammation and shows desirable effects on the oral biofilm and dental health. However, subgingival debridement during conservative treatment can lead to local trauma and transient bacteraemia, which might affect cardiovascular risk in these patients. Therefore, we investigated the effect of periodontal treatment on systemic platelet activation. MATERIALS AND METHODS: In a prospective therapeutic trial, 26 patients underwent periodontal treatment and patient blood was analysed immediately before and immediately after intervention for platelet activation markers (flow cytometric analysis of P-selectin, CD63 and CD40L surface expression, integrin αIIbß3 activation and fibrinogen binding, intra-platelet reactive oxygen species production, platelet-leukocyte aggregate formation and intra-platelet vasodilator-stimulated phosphoprotein phosphorylation) in response to adenosine diphosphate (ADP). RESULTS: The present study shows that basal platelet activation levels remain largely unaltered in response to periodontal treatment. We also did not observe significant changes in platelet reactivity in response to different concentrations of platelet agonist ADP. CONCLUSION: Subgingival debridement does not result in relevantly elevated platelet activation. Thus, augmented platelet activation seems unlikely to be a causative triggering factor that increases the short-term risk for platelet-mediated thrombotic events in response to subgingival debridement. CLINICAL RELEVANCE: Subgingival debridement is a safe procedure and does not increase the short-term risk for platelet-mediated thrombotic events.

Effect of bisphosphonate treatment of titanium surfaces on alkaline phosphatase activity in osteoblasts: a systematic review and meta-analysis.

BACKGROUND: Bisphosphonate coating of dental implants is a promising tool for surface modification aiming to improve the osseointegration process and clinical outcome. The biological effects of bisphosphonates are thought to be mainly associated with osteoclasts inhibition, whereas their effects on osteoblast function are unclear. A potential of bisphosphonate coated surfaces to stimulate osteoblast differentiation was investigated by several in vitro studies with contradictory results. The purpose of this systematic review and meta-analysis was to evaluate the effect of bisphosphonate coated implant surfaces on alkaline phosphatase activity in osteoblasts. METHODS: In vitro studies that assessed alkaline phosphatase activity in osteoblasts following cell culture on bisphosphonate coated titanium surfaces were searched in electronic databases PubMed/MEDLINE, Scopus and ISI Web of Science. Animal studies and clinical trials were excluded. The literature search was restricted to articles written in English and published up to August 2019. Publication bias was assessed by the construction of funnel plots. RESULTS: Eleven studies met the inclusion criteria. Meta-analysis showed that coating of titanium surfaces with bisphosphonates increases alkaline phosphatase activity in osteoblasts after 3 days (n = 1), 7 (n = 7), 14 (n = 6) and 21 (n = 3) days. (7 days beta coefficient = 1.363, p-value = 0.001; 14 days beta coefficient = 1.325, p-value < 0.001; 21 days beta coefficient = 1.152, p-value = 0.159). CONCLUSIONS: The meta-analysis suggests that bisphosphonate coatings of titanium implant surfaces may have beneficial effects on osteogenic behaviour of osteoblasts grown on titanium surfaces in vitro. Further studies are required to assess to which extent bisphosphonates coating might improve osseointegration in clinical situations.

In vitro evaluation of experimental light activated gels for tooth bleaching.

Dental bleaching is an important part of aesthetic dentistry. Various strategies have been created to enhance the bleaching efficacy. As one such strategy, light-activated nanoparticles that enable localized generation of reactive oxygen species have been developed. Here, we evaluated the cellular response to experimental gels containing these materials in in vitro models. L-929 cells, 3T3 cells, and gingival fibroblasts were exposed to the gels at 50%, 10%, 2%, 0.4%, 0.08%, 0.016%, and 0.0032%. The gels contained TiO2/Ag nanoparticles, TiO2 nanoparticles, hydrogen peroxide (6% hydrogen peroxide), or no added component and were tested with and without exposure to light. Cells were exposed to gels for 24 h or for 30 min. The latter case mimics the clinical situation of a short bleaching gel exposure. Metabolic activity and cell viability were evaluated with MTT and neutral red assays, respectively. We found a dose-dependent reduction of formazan formation and neutral red staining with gels containing TiO2/Ag nanoparticles or TiO2 nanoparticles in the 24 h setting with and without illumination. The strongest reduction, which was not dose-dependent in the evaluated concentrations, was found for the gel containing hydrogen peroxide. Gels with TiO2 nanoparticles showed a similar response to gel without particles. TiO2/Ag gel showed a slightly higher impact. When the gels were removed by rinsing after 30 min of exposure without light illumination, gel containing TiO2/Ag nanoparticles showed a stronger reduction of formazan formation and neutral red staining than gel containing TiO2 particles. Exposure of cells for 30 min under illumination and consequent rinsing off the gels also showed that Ag-containing particles can have a higher impact on the metabolic activity and viability than particles from TiO2. Overall our results show that experimental bleaching gels containing TiO2/Ag or TiO2 nanoparticles are less cytotoxic than hydrogen peroxide-containing gel. When gels are removed, gel containing TiO2/Ag particles exhibit a stronger reduction of metabolic activity and viability than the gel containing TiO2.

Soluble CD14 Enhances the Response of Periodontal Ligament Stem Cells to Toll-Like Receptor 2 Agonists.

Human periodontal ligament stem cells (hPDLSCs) do not express membrane-bound CD14, and their responsiveness to bacterial lipopolysaccharide (LPS) is drastically enhanced by soluble CD14 (sCD14), which is due to the facilitation of the interaction between LPS and Toll-like receptor- (TLR-) 4. Several studies also show that sCD14 enhances the responsiveness of different immune cells to TLR-2, but such effect in hPDLSCs has not been studied so far. In the present study, we investigated for the first time the potential effect of sCD14 on the hPDLSC response to two different TLR-2 agonists, in vitro. Primary hPDLSCs were stimulated with synthetic lipopeptide Pam3CSK4 or lipoteichoic acid (LTA) in concentrations 1-1000 ng/ml in the presence/absence of sCD14 (250 ng/ml). Additionally, the effect of different sCD14 concentrations (2.5-250 ng/ml) on the TLR-2 response was determined in Pam3CSK4- or LTA-triggered hPDLSCs. The resulting expression of interleukin- (IL-) 6, chemokine C-X-C motif ligand 8 (CXCL8), and chemokine C-C motif ligand 2 (CCL2) was measured by qPCR and ELISA. The production of IL-6, CXCL8, and CCL2 was gradually increased by both TLR-2 agonists and was significantly enhanced by sCD14. The response of hPDLSCs to low and submaximal concentrations of TLR-2 agonists (1-100 ng/ml) was most effectively enhanced by sCD14. The effect of sCD14 on TLR-2 response in hPDLSCs was concentration-dependent and was already detectable at low sCD14 levels. Our data showed that exogenous sCD14 significantly enhanced the responsiveness of hPDLSCs to TLR-2 agonists and enabled the detection of their small amounts. This effect was already detectable at low sCD14 levels, which are comparable to those in saliva and gingival crevicular fluid. Changes in the local sCD14 level may be considered as a crucial factor influencing the susceptibility of hPDLSCs to different pathogens and thus may contribute to the progression of periodontitis.

The impact of collagen membranes on 3D gingival fibroblast toroids.

BACKGROUND: Development in guided tissue regeneration requires biomaterial testing. 3D cell constructs represent a new approach to bridge the gap between cell culture and animal models. Following the hypothesis that attachment behavior of cells could be observed in toroidal 3D cell constructs, the aim of this study was to evaluate 3D gingival fibroblast (GF) toroids as a simple and feasible in vitro assay to test attachment of oral fibroblasts to collagen membranes. METHODS: 3D ring-like structures (toroids) were formed from human GF. Hematoxylin-eosin staining was performed with formed GF toroids. Produced GF toroids were seeded onto plastic surfaces or collagen membranes. The morphology was documented at 24 h, 48 h and 72 h after seeding with light and fluorescence microscopy. Toroid vitality was assessed at same time points with a resazurin-based toxicity assay. RESULTS: GF showed normal morphology in toroid hematoxylin-eosin staining. Over 72 h, GF toroids on plastic surfaces stayed unchanged, while GF toroids on collagen membranes showed dilatation. GF toroids on plastic surfaces and collagen membranes were metabolically active over the observed period. CONCLUSIONS: Depending on the surface material, 3D GF toroids show different attachment behavior. Thus, GF toroids are suitable as simple assay to study attachment behavior to various biomaterials.

Effect of two different primers on the shear bond strength of metallic brackets to zirconia ceramic.

BACKGROUND: In view of the increasing demand of adult orthodontics for esthetic purposes, adult treatment with brackets has become an important issue. One essential factor for the quality of such treatment is bracket bonding on ceramics. For testing the adhesive bond between the bracket and the ceramic surface it is important to consider the static or cyclic loading that goes along with it. METHODS: Metallic Brackets were adhesively fixed on zirconia ceramic blocks in a simulated leveling phase using two different primers (Monobond S and Monobond Etch & Prime). Half of the metallic brackets were activated using a 0.14-nickel titanium wire, while the other half remained non-activated. Shear bond testing (SBT) was performed after thermocycling. Furthermore the Adhesive Remnant Index (ARI) was analyzed. RESULTS: SBT resulted in significantly higher shear bond values when Monobond Etch & Prime was used compared to the use of Monobond S. Activation of the brackets did not show different results in comparison to the non-activated brackets. The ARI did not indicate cement remnants on the ceramic surface, regardless of the primer and the activation status. CONCLUSIONS: The use of Monobond Etch & Prime has great potential for the bonding of brackets on dental zirconia ceramics.