Invitro and Invivo Study of PCL-Hydrogel Scaffold to Advance Bioprinting Translation in Microtia Reconstruction.

BACKGROUND: Bioprinting has shown promise in the area of microtia reconstruction. However clinical translation has been challenged by the lack of robust techniques to control delivery of stem cells. Hybrid printing allowing multiple materials, both cell and support, to be printed together may overcome these challenges. OBJECTIVE: This study assesses the degradation behavior and tissue compatibility of hybrid scaffolds (PCL-Hydrogel) compared to single material Polycaprolactone (PCL) scaffolds in-vitro and in-vivo. Sheep demonstrate similar fascial anatomy to humans. This is the first reported study using a sheep model to study hybrid scaffolds for microtia. METHODS: PCL and PCL-Hydrogel samples of increasing porosity were subjected to an accelerated enzymatic degradation assay to study degradation behavior in-vitro. In addition, a 6-month study using Merino-Dorset sheep was conducted to compare the biological reaction of the host to PCL and PCL-hydrogel scaffolds. RESULTS: In-vitro degradation showed homogenous degradation of the scaffold. PCL presented the dominating influence on degradation volume compared to hydrogel. In-vivo, there was no evidence of skin irritation or infection over 6 months in both control and test, though PCL-hydrogel scaffolds showed higher levels of tissue ingrowth. CONCLUSION: Homogenous degradation pattern of porous scaffolds may create less surrounding tissue irritation. Hybrid scaffolds had good biological compatibility and showed better tissue ingrowth than PCL alone.

Virtual reality digital surgical planning for jaw reconstruction: a usability study.

BACKGROUND: Digital surgical planning (DSP) has revolutionized the preparation and execution of the management of complex head and neck pathologies. The addition of virtual reality (VR) allows the surgeon to have a three-dimensional experience with six degrees of freedom for visualizing and manipulating objects. This pilot study describes the participants experience with the first head and neck reconstructive VR-DSP platform. METHODS: An original VR-DSP platform has been developed for planning the ablation and reconstruction of head and neck pathologies. A prospective trial utilizing this platform involving reconstructive surgeons was performed. Participants conducted a simulated VR-DSP planning session, pre- and post-questionnaire as well as audio recordings allowing for qualitative analysis. RESULTS: Thirteen consultant reconstructive surgeons representing three surgical backgrounds with varied experience were recruited. The majority of surgeons had no previous experience with VR. Based on the system usability score, the VR-DSP platform was found to have above average usability. The qualitative analysis demonstrated the majority had a positive experience. Participants identified some perceived barriers to implementing the VR-DSP platform. CONCLUSIONS: Virtual reality-digital surgical planning is usable and acceptable to reconstructive surgeons. Surgeons were able to perform the steps in an efficient time despite limited experience. The addition of VR offers additional benefits to current VSP platforms. Based on the results of this pilot study, it is likely that VR-DSP will be of benefit to the reconstructive surgeon.

Hydrogel: A Potential Material for Bone Tissue Engineering Repairing the Segmental Mandibular Defect.

Free flap surgery is currently the only successful method used by surgeons to reconstruct critical-sized defects of the jaw, and is commonly used in patients who have had bony lesions excised due to oral cancer, trauma, infection or necrosis. However, donor site morbidity remains a significant flaw of this strategy. Various biomaterials have been under investigation in search of a suitable alternative for segmental mandibular defect reconstruction. Hydrogels are group of biomaterials that have shown their potential in various tissue engineering applications, including bone regeneration, both through in vitro and in vivo pre-clinical animal trials. This review discusses different types of hydrogels, their fabrication techniques, 3D printing, their potential for bone regeneration, outcomes, and the limitations of various hydrogels in preclinical models for bone tissue engineering. This review also proposes a modified technique utilizing the potential of hydrogels combined with scaffolds and cells for efficient reconstruction of mandibular segmental defects.

Health-related quality of life in maxillectomy patients undergoing dentoalveolar rehabilitation.

OBJECTIVES: Surgical resection of the maxilla impairs aesthetics, speech, swallowing, and mastication. Maxillary reconstruction is increasingly performed with virtual surgical planning (VSP) to enhance functional dental rehabilitation with a conventional denture or osseointegrated implants. The aim of this study was to determine whether dental status and VSP is associated with health-related quality of life (HRQOL) and function in patients who have undergone maxillectomy. MATERIALS AND METHODS: A cross-sectional study was conducted among patients who underwent free flap reconstruction or obturation of the maxilla between July 2009 and December 2020. The FACE-Q Head and Neck Cancer (FACE-Q) module, M.D. Anderson Dysphagia Inventory (MDADI), and Speech Handicap Index (SHI) were used to evaluate HRQOL. RESULTS: Forty-three patients (response rate 59%) completed questionnaires and 48% underwent dental rehabilitation. In Okay Class II and III defects, adjusting for the effect of radiotherapy and time from surgery, there was a positive association between denture status and FACE-Q smiling (p = 0.020), eating (p = 0.012), smiling (p = 0.015), and MDADI global (p = 0.015), emotional (p = 0.027), functional (p = 0.028), and composite (p = 0.029) scores. VSP was associated with FACE-Q swallowing (p = 0.005), drooling (p = 0.030), eating (p = 0.008), smiling (p = 0.021), MDADI global (p = 0.017), emotional (p = 0.041), functional (p = 0.040), composite (p = 0.038), and SHI total scores (p = 0.042). CONCLUSIONS: Dentoalveolar rehabilitation and VSP were associated with higher HRQOL scores relating to eating and drinking, smiling, and speaking.

Effect of Radiotherapy on Functional and Health-Related Quality of Life Outcomes after Jaw Reconstruction.

Long-term health-related quality of life (HRQOL) and functional outcomes following mandibular and maxillary reconstruction are lacking. To determine these outcomes, a cross-sectional study of patients with a history of cancer who underwent jaw reconstruction was undertaken. Participants were identified from a database of jaw reconstruction procedures at the Chris O'Brien Lifehouse (Sydney, Australia). Eligible patients had at least one month follow-up, were aged ≥18 years at surgery, and had history of malignancy. HRQOL was measured using the FACE-Q Head and Neck Cancer Module (FACE-Q H&N). Functional outcomes were measured using the FACE-Q H&N, MD Anderson Dysphagia Inventory (MDADI) and Speech Handicap Index (SHI). Ninety-seven questionnaires were completed (62% response rate). Mean age of respondents was 63.7 years, 61% were male, and 64% underwent radiotherapy. Treatment with radiotherapy was associated with worse outcomes across 10/14 FACE-Q H&N scales, three MDADI subscales and one composite score, and the SHI. Mean differences in scores between irradiated and non-irradiated patients exceeded clinically meaningful differences for the MDADI and SHI. Issues with oral competence, saliva, speaking, and swallowing worsened with increasing time since surgery. Younger patients reported greater concerns with appearance, smiling, speaking, and cancer worry. Women reported greater concerns regarding appearance and associated distress. History of radiotherapy substantially impacts HRQOL and function after jaw reconstruction. Age at surgery and gender were also predictors of outcomes and associated distress. Pre-treatment counselling of patients requiring jaw reconstruction may lead to improved survivorship for patients with head and neck cancer.

3D hybrid printing platform for auricular cartilage reconstruction.

As scaffolds approach dimensions that are of clinical relevance, mechanical integrity and distribution becomes an important factor to the overall success of the implant. Hydrogels often lack the structural integrity and mechanical properties for use in vivo or handling. The inclusion of a structural support during the printing process, referred to as hybrid printing, allows the implant to retain structure and protect cells during maturation without needing to compromise its biological performance. In this study, scaffolds for the purpose of auricular cartilage reconstruction were evaluated via a hybrid printing approach using methacrylated Gelatin (GelMA) and Hyaluronic acid (HAMA) as the cell-laden hydrogel, Polycaprolactone (PCL) as structural support and Lutrol F-127 as sacrificial material. Furthermore, printing parameters such as nozzle diameter, strand spacing and filament orientation scaffolds were investigated. Compression and bending tests showed that increasing nozzle sizes decrease the compressive modulus of printed scaffolds, with up to 82% decrease in modulus when comparing between a 400 µm and 200 µm sized nozzle tip at the same strand spacing. On the contrary, strand spacing and orientation influences mainly the bending modulus due to the greater porosity and changes in pore size area. Using a 400 µm sized nozzle, scaffolds fabricated have a measured compression and bending modulus in the range similar to the native cartilage. The viability and proliferation of human mesenchymal stem cells delivered within the bioink was not affected by the printing process. Using results obtained from mechanical testing, a scaffold with matching mechanical properties across six distinct regions mimicking the human auricular cartilage can be completed in one single print process. The use of PCL and GelMA-HAMA as structural support and cell-laden hydrogel respectively are an excellent combination to provide tailored mechanical integrity, while maintaining porosity and protection to cells during differentiation.

Time and cost-analysis of virtual surgical planning for head and neck reconstruction: A matched pair analysis.

OBJECTIVES: Virtual surgical planning (VSP) uses patient-specific modelling of the facial skeleton to provide a tailored surgical plan which may increase accuracy and reduce operating time. The aim of this study was to perform a time and cost-analysis comparing patients treated with and without VSP-technology. MATERIAL AND METHODS: A retrospective analysis of 138 patients undergoing microvascular free flap mandible (76.8%) or maxillary (23.2%) reconstruction between 2010 and 2018 was performed. The cohort was divided into two groups according to reconstruction-approach: non-VSP and proprietary-VSP (P-VSP). Cost-analysis was performed comparing non-VSP and P-VSP by matching patients according to site, bone flap, indication, complexity and age. RESULTS: Fibula, scapula and iliac crest free flaps were used in 92 patients (66.7%), 33 patients (23.9%) and 13 patients (9.4%), respectively. Eight patients (5.8%) required revision of the microvascular anastomosis, of which four flaps were salvaged giving a 2.9% flap failure rate. P-VSP was associated with shorter median length of stay (LOS) (10.0 vs 13.0 days, p = 0.009), lower mean procedure time (507.38 vs 561.75 min, p = 0.042), and similar median total cost ($34939.00 vs $34653.00, p = 0.938), despite higher complexity (2.0 vs 1.0, p = 0.09). In the matched-series, P-VSP was associated with a similar median LOS (10.5 vs 11 days), lower mean procedure time (497 vs 555 min, p = 0.231), lower mean total cost ($35,493 v $37,345) but higher median total cost ($35504.50 vs $32391.50, p = 0.607), although not statistically different. CONCLUSION: VSP-technology represents a helpful surgical tool for complex reconstructions, without adversely impacting on the overall-cost of treatment.

Maxillofacial reconstruction using in-house virtual surgical planning.

BACKGROUND: Mandibular and maxillary reconstruction using fibula free transfer is common in many tertiary referral centres. Virtual surgical planning (VSP) is a relatively recent adjunct that allows surgeons to plan resection and reconstruction prior to theatre. This has been shown to reduce operative times and decrease surgeon stress intraoperatively. VSP requires technicians with the appropriate skill set and required materials, software and technology, which is accompanied by a cost that may be prohibitive. Usually, this is outsourced to an external company. We present a preliminary case series of VSP in maxillofacial reconstruction done using our own staff without external resources. METHODS: Six patients underwent mandible (n = 5) or maxillary (n = 1) reconstruction with a fibula free flap using in-house VSP. The cases ranged from relatively simple to complex. We present our steps in the planning process and application of this technique. RESULTS AND CONCLUSION: In-house VSP is a feasible process with low cost and turnaround time, making surgery more efficient.