Iodination of PEGylated Polymers Counteracts the Inhibition of Fibrinogen Adsorption by PEG.

Poly(ethylene glycol), PEG, known to inhibit protein adsorption, is widely used on the surfaces of biomedical devices when biofilm formation is undesirable. Poly(desaminotyrosyl-tyrosine ethyl ester carbonate), PDTEC, PC for short, has been a promising coating polymer for insertion devices, and it has been anticipated that PEG plays a similar role if it is copolymerized with PC. Earlier studies show that no fibrinogen (Fg) is adsorbed onto PC polymers with PEG beyond the threshold weight percentage. This is attributed to the phase separation of PEG. Further, iodination of the PC units in the PC polymer, (I2PC), has been found to counteract this Fg-repulsive effect by PEG. In this study, we employ surface-sensitive X-ray techniques to demonstrate the surface affinity of Fg toward the air-water interface, particularly in the presence of self-assembled PC-based film, in which its constituent polymer units are assumed to be much more mobile as a free-standing film. Fg is found to form a Gibbs monolayer with its long axis parallel to the aqueous surface, thus maximizing its interactions with hydrophobic interfaces. It influences the amount of insoluble, surface-bound I2PC likely due to the desorption of the formed Fg-I2PC complex and/or the penetration of Fg onto the I2PC film. The results show that the phase behavior at the liquid-polymer interface shall be taken into account for the surface behavior of bulk polymers surrounded by tissue. The ability of PEG units rearranging into a protein-blocking layer, rather than its mere presence in the polymer, is the key to antifouling characteristics desired for polymeric coating on insertion devices.

Disassembly of Nanospheres with a PEG Shell upon Adsorption onto PEGylated Substrates.

Polymeric nanospheres have the ability to encapsulate drugs and are therefore widely used in drug delivery applications. Structural transformations that affect drug release from nanospheres are governed by the surrounding environment. To understand these effects, we investigated the adsorption behavior of three types of nanospheres onto model surfaces using quartz crystal microbalance with dissipation (QCM-D) and by atomic force microscopy (AFM). Substrates were prepared from polymers with different degrees of PEGylation (0, 1, and 15%). Nanospheres were prepared via self-assembly of block copolymers. Tyrosine-derived nanospheres are A-B-A triblock copolymers with methoxy poly(ethylene glycol) (PEG) as the A-blocks and an alternating copolymer of desaminotyrosyl-tyrosine octyl ester and suberic acid oligo(DTO-SA) as the B-block. On non-PEGylated substrates, these nanospheres assembled into a close-packed structure; on PEGylated substrates, the adsorbed nanospheres formed a continuous film, thinner than the size of the nanospheres suggesting unraveling of the PEG corona and disassembly of the nanospheres. Also, the adsorption was concentration-dependent, the final thickness being attained at exponentially longer times at lower concentrations. Such substrate- and concentration-dependent behavior was not observed with Pluronic F-127 and PEG-poly(caprolactone) (PCL) nanospheres. Since the essential difference among the three nanospheres is the composition of the core, we conclude that the core influences the adsorption characteristics of the nanospheres as a consequence of their disassembly upon adsorption. These results are expected to be useful in designing nanospheres for their efficient transport across vascular barriers and for delivering drugs to their targets.

The Controlled Direct Effect of Early-Life Socioeconomic Position on Periodontitis in a Birth Cohort.

This study used data from the 1982 Pelotas Birth Cohort Study, Brazil, to estimate the controlled direct effect of early-life socioeconomic position (SEP) on periodontitis at age 31 years, controlling for adulthood income and education, smoking, and dental hygiene. Sex was included as a covariate. Early-life SEP was measured at participant birth based on income, health services payment mode, maternal education, height, and skin color (lower versus middle/higher SEP). Periodontitis was assessed through clinical examination at age 31 years (healthy, mild periodontitis, or moderate-to-severe disease). Adulthood behaviors (smoking, dental hygiene) were the mediators, and adulthood SEP (education and income) represented the exposure-induced mediator-outcome confounders. A regression-based approach was used to assess the controlled direct effect of early-life SEP on periodontitis. Multinomial regression models were used to estimate risk ratios and their 95% confidence intervals. The prevalences of mild and moderate-to-severe periodontitis were 23.0% and 14.3%, respectively (n = 539). Individuals from the lowest early-life SEP had a higher risk of moderate-to-severe periodontitis controlled for mediators and exposure-induced mediator-outcome confounders: risk ratio = 1.85 (95% confidence interval: 1.06, 3.24), E value 3.1. We found that early-life SEP was associated with the development of periodontitis in adulthood that was not mediated by adulthood SEP and behaviors.

Adsorption of Fibrinogen and Fibronectin on Elastomeric Poly(butylene succinate) Copolyesters.

Proteins adsorbed onto biomaterial surfaces facilitate cell-material interactions, including adhesion and migration. Of particular importance are provisional matrix components, fibrinogen (Fg) and fibronectin (Fn), which play an important role in the wound-healing process. Here, to assess the potential of a series of elastomeric poly(butylene succinate) (PBS) copolymers for soft tissue engineering and regenerative medicine applications, we examined the adsorption of Fg and Fn. We prepared spin-coated thin films of the poly(butylene succinate) homopolymer and a series of elastomeric poly(butylene succinate) copolymers with butylene succinate (PBS, hard segment) to succinate-dimer linoleic diol unit (dilinoleic succinate (DLS), soft segments) weight ratios of 70:30, 60:40, and 50:50. X-ray diffraction was used to assess crystallinity, whereas the obtained thin films were characterized using a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy. Protein adsorption was assessed using QCM-D, followed by data analysis using viscoelastic modeling. On all three copolymers, we observed robust adsorption of both key provisional matrix proteins. Importantly, for both proteins, viscoelastic modeling determined that the adlayers were 30-40 nm thick and had low shear modulus values (<25 kPa), thus indicating soft orientations (end-on for Fg) or conformations (open for Fn) of the hydrated proteins. Overall, our results are very encouraging, as they predict excellent cell adhesion and migration, key features enabling tissue integration of potential PBS-DLS scaffolds.

Temperature-Activated PEG Surface Segregation Controls the Protein Repellency of Polymers.

Poly(ethylene glycol) (PEG) is widely used to modulate the hydration states of biomaterials and is often applied to produce nonfouling surfaces. Here, we present X-ray scattering data, which show that it is the surface segregation of PEG, not just its presence in the bulk, that makes this happen by influencing the hydrophilicity of PEG-containing substrates. We demonstrate a temperature-dependent trigger that transforms a PEG-containing substrate from a protein-adsorbing to a protein-repelling state. On films of poly(desaminotyrosyl-tyrosine-co-PEG carbonate) with high (20 wt %) PEG content, in which very little protein adsorption is expected, quartz crystal microbalance data showed significant adsorption of fibrinogen and bovine serum albumin at 8 °C. The surface became protein-repellent at 37.5 °C. When the same polymer was iodinated, the polymer was protein-adsorbent, even when 37 wt % PEG was incorporated into the polymer backbone. This demonstrates that high PEG content by itself is not sufficient to repel proteins. By inhibiting phase separation either with iodine or by lowering the temperature, we show that PEG must phase-separate and bloom to the surface to create an antifouling surface. These results suggest an opportunity to design materials with high PEG content that can be switched from a protein-attractant to a protein-repellent state by inducing phase separation through brief exposure to temperatures above their glass transition temperature.

Effect decomposition through multiple causally nonordered mediators in the presence of exposure-induced mediator-outcome confounding.

Avin et al (2005) showed that, in the presence of exposure-induced mediator-outcome confounding, decomposing the total causal effect (TCE) using standard conditional exchangeability assumptions is not possible even under a nonparametric structural equation model with all confounders observed. Subsequent research has investigated the assumptions required for such a decomposition to be identifiable and estimable from observed data. One approach was proposed by VanderWeele et al (2014). They decomposed the TCE under three different scenarios: (1) treating the mediator and the exposure-induced confounder as joint mediators; (2) generating path-specific effects albeit without distinguishing between multiple distinct paths through the exposure-induced confounder; and (3) using so-called randomised interventional analogues where sampling values from the distribution of the mediator within the levels of the exposure effectively marginalises over the exposure-induced confounder. In this paper, we extend their approach to the case where there are multiple mediators that do not influence each other directly but which are all influenced by an exposure-induced mediator-outcome confounder. We provide a motivating example and results from a simulation study based on from our work in dental epidemiology featuring the 1982 Pelotas Birth Cohort in Brazil.

Nanospheres with a smectic hydrophobic core and an amorphous PEG hydrophilic shell: structural changes and implications for drug delivery.

The structure of nanospheres with a crystalline core and an amorphous diffuse shell was investigated by small-angle neutron scattering (SANS), small-, medium-, and wide-angle X-ray scattering (SAXS, MAXS and WAXS), and differential scanning calorimetry (DSC). Nanospheres, 28 to 35 nm in diameter, were prepared from a triblock copolymer with poly(ethylene glycol) (PEG) hydrophilic end-blocks and oligomers of alternating desaminotyrosyl-tyrosine octyl ester (DTO) and suberic acid (SA) as the central hydrophobic block. In the lyophilized nanospheres, the diffraction patterns show that the PEG shell is ∼10 nm in thickness and crystalline, and the hydrophobic core is ∼10 nm in diameter with a smectic liquid crystalline texture. In aqueous dispersions, the hydrated PEG forms an amorphous shell, but the crystalline phase in the core persists at concentrations down to 1 mg ml-1 as evidenced by the sharp MAXS diffraction peak at a d-spacing of 24.4 Å and a melting endotherm at 40 °C. As the dispersion is diluted (<1 mg ml-1), the core becomes less ordered, and its diameter decreases by 50% even though the overall size of the nanosphere remains essentially unchanged. It is likely that below a critical concentration, intermixing of hydrophobic segments with the PEG segments reduces the size and the crystallinity of the core. At these concentrations, the PEG corona forms a eutectic with water. The mechanisms by which the concentration of the dispersion influences the structure of the nanospheres, and consequently their drug-release characteristics, are discussed.

"Ruffled border" formation on a CaP-free substrate: A first step towards osteoclast-recruiting bone-grafts materials able to re-establish bone turn-over.

Osteoclasts are large multinucleated giant cells that actively resorb bone during the physiological bone turnover (BTO), which is the continuous cycle of bone resorption (by osteoclasts) followed by new bone formation (by osteoblasts). Osteoclasts secrete chemotactic signals to recruit cells for regeneration of vasculature and bone. We hypothesize that a biomaterial that attracts osteoclasts and re-establishes BTO will induce a better healing response than currently used bone graft materials. While the majority of bone regeneration efforts have focused on maximizing bone deposition, the novelty in this approach is the focus on stimulating osteoclastic resorption as the starter for BTO and its concurrent new vascularized bone formation. A biodegradable tyrosine-derived polycarbonate, E1001(1k), was chosen as the polymer base due to its ability to support bone regeneration in vivo. The polymer was functionalized with a RGD peptide or collagen I, or blended with ß-tricalcium phosphate. Osteoclast attachment and early stages of active resorption were observed on all substrates. The transparency of E1001(1k) in combination with high resolution confocal imaging enabled visualization of morphological features of osteoclast activation such as the formation of the "actin ring" and the "ruffled border", which previously required destructive forms of imaging such as transmission electron microscopy. The significance of these results is twofold: (1) E1001(1k) is suitable for osteoclast attachment and supports osteoclast maturation, making it a base polymer that can be further modified to optimize stimulation of BTO and (2) the transparency of this polymer makes it a suitable analytical tool for studying osteoclast behavior.

Diet-Induced Overweight and Obesity and Periodontitis Risk: An Application of the Parametric G-Formula in the 1982 Pelotas Birth Cohort.

We aimed to estimate hypothetical effects of habits (smoking, alcohol consumption, and fat and carbohydrates consumption) combined with diet-induced overweight/obesity on the risk of periodontitis. The risk of any periodontitis, moderate/severe periodontitis, and the combination of bleeding on probing (BOP) and clinical attachment loss (CAL) was estimated using the parametric g-formula in adults aged 31 years from the 1982 Pelotas Birth Cohort in Brazil. Individuals in this cohort have been followed since birth. Hypothetical conditions were set independently for each risk factor and in combination for the entire population. A total of 539 participants had oral examinations in 2013. The cumulative 31-year risk under no intervention was 33.3% for any periodontitis, 14.3%, for moderate/severe periodontitis, and 14.7%, for BOP and CAL. According to our statistical approach, diet-induced overweight/obesity increased the risk of all outcomes: 11% (overweight) and 22% (obesity) higher risk of periodontitis; 12% (overweight) and 27% (obesity) higher risk of moderate/severe periodontitis; 21% (overweight) and 57% (obesity) higher risk of CAL and BOP. When overweight/obesity was combined with other unhealthy habits, the risk was even greater. Our findings suggest that the combination of diet-induced obesity with other risk factors may increase the risk of periodontitis. Further research in the field is required to corroborate our study.

Fibrin glue as a stabilization strategy in peripheral nerve repair when using porous nerve guidance conduits.

Porous conduits provide a protected pathway for nerve regeneration, while still allowing exchange of nutrients and wastes. However, pore sizes >30 µm may permit fibrous tissue infiltration into the conduit, which may impede axonal regeneration. Coating the conduit with Fibrin Glue (FG) is one option for controlling the conduit's porosity. FG is extensively used in clinical peripheral nerve repair, as a tissue sealant, filler and drug-delivery matrix. Here, we compared the performance of FG to an alternative, hyaluronic acid (HA) as a coating for porous conduits, using uncoated porous conduits and reverse autografts as control groups. The uncoated conduit walls had pores with a diameter of 60 to 70 µm that were uniformly covered by either FG or HA coatings. In vitro, FG coatings degraded twice as fast as HA coatings. In vivo studies in a 1 cm rat sciatic nerve model showed FG coating resulted in poor axonal density (993 ± 854 #/mm2), negligible fascicular area (0.03 ± 0.04 mm2), minimal percent wet muscle mass recovery (16 ± 1 in gastrocnemius and 15 ± 5 in tibialis anterior) and G-ratio (0.73 ± 0.01). Histology of FG-coated conduits showed excessive fibrous tissue infiltration inside the lumen, and fibrin capsule formation around the conduit. Although FG has been shown to promote nerve regeneration in non-porous conduits, we found that as a coating for porous conduits in vivo, FG encourages scar tissue infiltration that impedes nerve regeneration. This is a significant finding considering the widespread use of FG in peripheral nerve repair.

Bridging the gap in 1(st) year dental material curriculum: A 3 year randomized cross over trial.

BACKGROUND: Case-oriented small group discussions (COSGDs) can help students to correlate and integrate the basic science of dental materials into clinical application. We used COSGDs along with didactic lectures in dental material curriculum and hypothesized that case-oriented group discussions would be more effective than traditional lecture alone in terms of performance of students, student perception on the above two teaching methodologies and the feasibility in classes of 2010, 2011 and 2012. METHODS: A total of 170 students were taught using both COSGD and didactic lecture in a randomized controlled crossover trial design. Their performance was assessed through multiple-choice questions (MCQs) as part of the formative assessment, and their perception was assessed through Likert scale questionnaire. RESULTS: The mean difference in the scores between case-oriented group discussions with lecture and didactic lecture showed significant difference only in few topics. Around 94-96% of students perceived COSGD with didactic lecture help them understand theory better; 76-92% of students feel more comfortable asking questions in a group discussion; 89-98% of students feel such discussions motivate them and 91-100% of students agree that discussions make the subject interesting in the respective years of 2010, 2011 and 2012. CONCLUSION: Effectiveness of COSGD in terms of scores through MCQs is comparable to traditional lecture. However, most of the students perceive COSGD help them understand the theory better; co-relate clinically; more motivating and interesting than a traditional lecture. Feasibility in institution needs more time and resources to conduct COSGD within the dental material curriculum.

Poly(NaSS) functionalization modulates the conformation of fibronectin and collagen type I to enhance osteoblastic cell attachment onto Ti6Al4V.

Functionalization of surfaces with poly(sodium styrenesulfonate) (poly(NaSS)) has recently been found to enhance osteointegration of implantable materials. Radical polymerization of poly(NaSS) on titanium (Ti)-based substrates has been used to improve their long-term performance by preventing fibrosis and consequently implant loosening. However, the influence of the sulfonate groups on the early cell behavior and the associated molecular phenomena remains to be understood. In this work, we used quartz crystal microbalance with dissipation (QCM-D) to elucidate the role of poly(NaSS) in enhancing osteoblastic cell attachment. This was measured by following the cell attachment using the MC3T3-E1 cell line, on fetal bovine serum (FBS) preadsorbed surfaces and on substrates adsorbed with a series of relevant proteins, bovine serum albumin (BSA), fibronectin (Fn), and collagen type I (Col I). Comparison of the performance of poly(NaSS) with other clinically important substrates such as Ti alloy Ti6Al4V, gold, and poly(desamino-tyrosyl-tyrosine ethyl ester carbonate) (poly(DTEc)) indicates poly(NaSS) to be a superior substrate for MC3T3-E1 cells attachment. This attachment was found to be integrin mediated in the presence of Fn and Col I. Antibodies specific to the RGD peptide and the N- and C-terminal HB-binding domains reacted more intensively with Fn adsorbed on poly(NaSS). Fn adapts a conformation favorable to RGD mediated cell attachment when adsorbed onto poly(NaSS).

Structure of biodegradable films at aqueous surfaces: X-ray diffraction and spectroscopy studies of polylactides and tyrosine-derived polycarbonates.

Three representative polymers of increasing modulus, poly(d,l-lactic acid), PDLLA, poly(desaminotyrosyl-tyrosine ethyl ester carbonate), PDTEC, and the same polymer with iodinated DTE segments, PI2DTEC, were characterized by surface-pressure versus area (Π-A) isotherms and surface sensitive X-ray diffraction techniques. Films of 10-100 Å thickness were prepared for these studies by spreading dilute polymer solutions at air-water interfaces. The general properties of the isotherms and the Flory exponents, determined from the isotherms, vary in accordance with the increasing modulus of PDLLA, PDTEC, PI2DTEC, respectively. The analysis of in situ X-ray reflectivity and grazing incidence X-ray diffraction (GIXD) measurements from films at aqueous surfaces provides a morphological picture that is consistent with the modulus of the polymers, and to a large extent, with their packing in their dry-bulk state. Large absorption of X-rays by iodine enabled X-ray spectroscopic studies under near-total-reflection conditions to determine the iodine distribution in the PI2DTEC film and complement the structural model derived from reflectivity and GIXD. These structural studies lay the foundation for future studies of polymer-protein interactions at aqueous interfaces.

Examining polymer-protein biophysical interactions with small-angle x-ray scattering and quartz crystal microbalance with dissipation.

Polymer-protein hybrids can be deployed to improve protein solubility and stability in denaturing environments. While previous work used robotics and active machine learning to inform new designs, further biophysical information is required to ascertain structure-function behavior. Here, we show the value of tandem small-angle x-ray scattering (SAXS) and quartz crystal microbalance with dissipation (QCMD) experiments to reveal detailed polymer-protein interactions with horseradish peroxidase (HRP) as a test case. Of particular interest was the process of polymer-protein complex formation under thermal stress whereby SAXS monitors formation in solution while QCMD follows these dynamics at an interface. The radius of gyration (Rg ) of the protein as measured by SAXS does not change significantly in the presence of polymer under denaturing conditions, but thickness and dissipation changes were observed in QCMD data. SAXS data with and without thermal stress were utilized to create bead models of the potential complexes and denatured enzyme, and each model fit provided insight into the degree of interactions. Additionally, QCMD data demonstrated that HRP deforms by spreading upon surface adsorption at low concentration as shown by longer adsorption times and smaller frequency shifts. In contrast, thermally stressed and highly inactive HRP had faster adsorption kinetics. The combination of SAXS and QCMD serves as a framework for biophysical characterization of interactions between proteins and polymers which could be useful in designing polymer-protein hybrids.

Effect of oral health literacy on self-reported tooth loss: A multiple mediation analysis.

BACKGROUND: This study aims to investigate the mediating pathways of oral health literacy (OHL) and oral health-related behaviours on the relationship between education and self-reported tooth loss among Australian adults. METHODS: Data used for studying the effects of mediating pathways are from the National Dental Telephone Interview Survey 2013, a random sample survey of Australian adults aged 18+ years. To study the mediating effects, we use counterfactual-based analysis. To decompose the effect of multiple mediator's alternate, to natural effect, methods such as interventional effects have been proposed. In this paper, we use these approaches to decompose the effect between education, OHL and oral health-related behaviours on self-reported tooth loss. Sensitivity analysis was performed for unmeasured confounding with multiple mediators. RESULTS: Data were available for 2936 Australian adults. The prevalence of persons with ≥12 self-reported tooth loss was approximately 15%. The average total causal effect from the low education group was nearly 150%, and the interventional indirect effect through OHL and the dependence of oral health-related behaviours on OHL to more than 12 missing teeth were 20% and 120%, respectively, higher than in the high education group. Sensitivity analysis indicated if the difference in the prevalence of unmeasured confounder is as big as 6% the direct effect and the indirect effect remains as observed. CONCLUSIONS: An additional two-fifths reduction on having more than 12 missing teeth for Australian adults with lower education level could be achieved if the proportion of lower OHL was decreased and optimal dental behaviours were increased.

Machine Learning on a Robotic Platform for the Design of Polymer-Protein Hybrids.

Polymer-protein hybrids are intriguing materials that can bolster protein stability in non-native environments, thereby enhancing their utility in diverse medicinal, commercial, and industrial applications. One stabilization strategy involves designing synthetic random copolymers with compositions attuned to the protein surface, but rational design is complicated by the vast chemical and composition space. Here, a strategy is reported to design protein-stabilizing copolymers based on active machine learning, facilitated by automated material synthesis and characterization platforms. The versatility and robustness of the approach is demonstrated by the successful identification of copolymers that preserve, or even enhance, the activity of three chemically distinct enzymes following exposure to thermal denaturing conditions. Although systematic screening results in mixed success, active learning appropriately identifies unique and effective copolymer chemistries for the stabilization of each enzyme. Overall, this work broadens the capabilities to design fit-for-purpose synthetic copolymers that promote or otherwise manipulate protein activity, with extensions toward the design of robust polymer-protein hybrid materials.

A multilayered scaffold for regeneration of smooth muscle and connective tissue layers.

Tissue regeneration often requires recruitment of different cell types and rebuilding of two or more tissue layers to restore function. Here, we describe the creation of a novel multilayered scaffold with distinct fiber organizations-aligned to unaligned and dense to porous-to template common architectures found in adjacent tissue layers. Electrospun scaffolds were fabricated using a biodegradable, tyrosine-derived terpolymer, yielding densely-packed, aligned fibers that transition into randomly-oriented fibers of increasing diameter and porosity. We demonstrate that differently-oriented scaffold fibers direct cell and extracellular matrix (ECM) organization, and that scaffold fibers and ECM protein networks are maintained after decellularization. Smooth muscle and connective tissue layers are frequently adjacent in vivo; we show that within a single scaffold, the architecture supports alignment of contractile smooth muscle cells and deposition by fibroblasts of a meshwork of ECM fibrils. We rolled a flat scaffold into a tubular construct and, after culture, showed cell viability, orientation, and tissue-specific protein expression in the tube were similar to the flat-sheet scaffold. This scaffold design not only has translational potential for reparation of flat and tubular tissue layers but can also be customized for alternative applications by introducing two or more cell types in different combinations.

Tyrosine-derived polycarbonate nerve guidance tubes elicit proregenerative extracellular matrix deposition when used to bridge segmental nerve defects in swine.

Promising biomaterials should be tested in appropriate large animal models that recapitulate human inflammatory and regenerative responses. Previous studies have shown tyrosine-derived polycarbonates (TyrPC) are versatile biomaterials with a wide range of applications across multiple disciplines. The library of TyrPC has been well studied and consists of thousands of polymer compositions with tunable mechanical characteristics and degradation and resorption rates that are useful for nerve guidance tubes (NGTs). NGTs made of different TyrPCs have been used in segmental nerve defect models in small animals. The current study is an extension of this work and evaluates NGTs made using two different TyrPC compositions in a 1 cm porcine peripheral nerve repair model. We first evaluated a nondegradable TyrPC formulation, demonstrating proof-of-concept chronic regenerative efficacy up to 6 months with similar nerve/muscle electrophysiology and morphometry to the autograft repair control. Next, we characterized the acute regenerative response using a degradable TyrPC formulation. After 2 weeks in vivo, TyrPC NGT promoted greater deposition of pro-regenerative extracellular matrix (ECM) constituents (in particular collagen I, collagen III, collagen IV, laminin, and fibronectin) compared to commercially available collagen-based NGTs. This corresponded with dense Schwann cell infiltration and axon extension across the lumen. These findings confirmed results reported previously in a mouse model and reveal that TyrPC NGTs were well tolerated in swine and facilitated host axon regeneration and Schwann cell infiltration in the acute phase across segmental defects - likely by eliciting a favorable neurotrophic ECM milieu. This regenerative response ultimately can contribute to functional recovery.

A step toward engineering thick tissues: Distributing microfibers within 3D printed frames.

Microfiber mats for tissue engineering scaffolds support cell growth, but are limited by poor cell infiltration and nutrient transport. Three-dimensional printing, specifically fused deposition modeling (FDM), can rapidly produce customized constructs, but macroscopic porosity resulting from low resolution reduces cell seeding efficiency and prevents the formation of continuous cell networks. Here we describe the fabrication of hierarchical scaffolds that integrate a fibrous microenvironment with the open macropore structure of FDM. Biodegradable tyrosine-derived polycarbonate microfibers were airbrushed iteratively between layers of 3D printed support structure following optimization. Confocal imaging showed layers of airbrushed fiber mats supported human dermal fibroblast growth and extracellular matrix development throughout the scaffold. When implanted subcutaneously, hierarchical scaffolds facilitated greater cell infiltration and tissue formation than airbrushed fiber mats. Fibronectin matrix assembled in vitro throughout the hierarchical scaffold survived decellularization and provided a hybrid substrate for recellularization with mesenchymal stromal cells. These results demonstrate that by combining FDM and airbrushing techniques we can engineer customizable hierarchical scaffolds for thick tissues that support increased cell growth and infiltration.

Calcium phosphate enriched synthetic tyrosine-derived polycarbonate - dicalcium phosphate dihydrate polymer scaffolds for enhanced bone regeneration.

Optimal repair of large craniomaxillofacial (CMF) defects caused by trauma or disease requires the development of new, synthetic osteoconductive materials in combination with cell-based therapies, to overcome the limitations of traditionally used bone graft substitutes. In this study, tyrosine-derived polycarbonate, E1001(1k) scaffolds were fabricated to incorporate the osteoinductive coating, Dicalcium phosphate dihydrate (DCPD). The biocompatibility of E1001(1k)-DCPD, E1001(1k)-ßTCP and E1001(1k) scaffolds was compared using in vitro culture with human dental pulp stem cells (hDPSCs). We found that the DCPD coating was converted to carbonated hydroxyapatite over time in in vitro culture in Osteogenic Media, while the ßTCP did not. hDPSCs exhibited slow initial attachment and proliferation on DCPD E1001(1k) scaffolds, but subsequently improved over time in culture, and promoted osteogenic differentiation. To the best of our knowledge, this study highlights for the first time the effects of Osteogenic Media on phase changes of DCPD, and on DCPD scaffold cytocompatibility with hDPSCs. DCPD showed similar hDPSC biocompatibility and osteoconductivity as compared to ßTCP, and osteogenic differentiation of seeded hDPSCs. These studies suggest that E1001(1k)-DCPD scaffolds are a superior tool for craniofacial bone regeneration and provide the foundation for future in vivo testing.