The inhibition of cell spreading on a cellulose substrate (cuprophan) induces an apoptotic process via a mitochondria-dependent pathway.

Cell shape was found to be a strong indicator of whether individual cells grow or die, and may play an important role in controlling apoptosis as well as cell growth. We compared here the behaviour of rounded Swiss 3T3 cells aggregated on a cellulose cuprophan membrane to those cultured on dish polystyrene. We demonstrated that cells aggregated on cellulose substrates for up to 48 h underwent programmed cell death that was associated with phosphatidylserine flipping and caspase 9 and caspase 3 activation, suggesting a mitochondria-dependent apoptotic process. In addition, we found that this phenomenon cannot be entirely explained by disengagement of alpha 5 beta 1 integrin ligation.

Properties and in vitro evaluation of high modulus biodegradable polyurethanes for applications in cardiovascular stents.

This study examined the suitability of a family of biodegradable polyurethanes (PUs) NovoSorb developed for the vascular stent application. These segmented PUs are formulated to be biodegradable using degradable polyester and PU blocks. A series of PUs comprising different hard segment weight percentage ranging from 60 to 100 were investigated. The mechanical properties of the PUs were evaluated before and after gamma sterilization to assess their suitability for vascular implants. The real-time (PBS/37°C/pH 7.4) hydrolytic degradation studies were carried out under sterile conditions and PU glass transition temperature, molecular weight, and mass loss at 3, 6, and 9 months were determined. The viability and growth of Human Umbilical Vein Endothelial Cells (HUVEC) on PU surfaces were determined to assess the effect of PU degradation. The effect of coating of extracellular matrix (ECM) components on cell viability was also investigated. The study showed that the PUs possess excellent mechanical properties exhibiting high tensile strength (41-56 MPa) and tensile modulus (897-1496 MPa). The PU films maintained mechanical strength during the early phase of the degradation but lost strength at latter stages. The unmodified polymer surface of each PU promotes endothelial cell growth and proliferation, with a HUVEC retention rate of >70%.

Collagen type I together with fibronectin provide a better support for endothelialization.

Endothelialization of vascular implants is limited by the inability of cells to retain adhesion when exposed to flow. Extracellular matrix proteins, including fibronectin and collagen, enhance cell adherence on materials. This study investigated the behaviour of Human Umbilical Vein Endothelial Cells (HUVEC) on extracellular matrix coated polystyrene. Collagen and fibronectin were coated as single and double layers to analyse differences in cell proliferation, morphology, and cell-protein interactions. Significantly higher endothelial cell proliferation and migration rates were observed on the collagen and collagen+fibronectin coating compared to the uncoated or fibronectin-coated sample. Immmunofluorescent microscopy showed evidence of extracellular matrix remodelling in the double, collagen+fibronectin coating. These results strongly suggest that a double coating of collagen+fibronectin provides a better support structure for endothelial cell growth and contributes to improve the ability of vascular implants to become and remain endothelialized.

Stromal cells.

Stromal cells, or mesenchymal stem cells, are adherent clonogenic cells that can form colonies. They are mainly isolated from bone marrow but can also be found in umbilical cord blood, adipose tissues and amniotic fluids. These stem cells are easy to culture in vitro, and can differentiate into osteoblasts, chondrocytes, or adipocytes when stimulated appropriately. When seeded on a natural (titanium, ceramics, collagen fibers, silk, etc.) or synthetic (PLLA, PLGA, etc.) biomaterial scaffold, they adhere and differentiate to form a new tissue. Many studies have also explored stromal cell differentiation in bioreactors to form a 3-dimensional culture. This review focuses on the biomaterials used for tissue engineering with stromal cells.

Characterization of biomaterials polar interactions in physiological conditions using liquid-liquid contact angle measurements: relation to fibronectin adsorption.

Wettability of biomaterials surfaces and protein-coated substrates is generally characterized with the sessile drop technique using polar and apolar liquids. This procedure is often performed in air, which does not reflect the physiological conditions. In this study, liquid/liquid contact angle measurements were carried out to be closer to cell culture conditions. This technique allowed us to evaluate the polar contribution to the work of adhesion between an aqueous medium and four selected biomaterials widely used in tissue culture applications: bacteriological grade polystyrene (PS), tissue culture polystyrene (tPS), poly(2-hydroxyethyl methacrylate) film (PolyHEMA), and hydroxypropylmethylcellulose-carboxymethylcellulose bi-layered Petri dish (CEL). The contributions of polar interactions were also estimated on the same biomaterials after fibronectin (Fn) adsorption. The quantity of Fn adsorbed on PS, tPS, PolyHEMA and CEL surfaces was evaluated by using the fluorescein-labeled protein. PolyHEMA and CEL were found to be hydrophilic, tPS was moderately hydrophilic and PS was highly hydrophobic. After Fn adsorption on PS and tPS, a significant increase of the surface polar interaction was observed. On PolyHEMA and CEL, no significant adsorption of Fn was detected and the polar interactions remained unchanged. Finally, an inverse correlation between the polarity of the surfaces and the quantity of adsorbed Fn was established.

Probing fibronectin-surface interactions: a multitechnique approach.

The development of adhesive as well as antiadhesive surfaces is essential in various biomaterial applications. In this study, we have used a multidisciplinary approach that combines biological and physicochemical methods to progress in our understanding of cell-surface interactions. Four model surfaces have been used to investigate fibronectin (Fn) adsorption and the subsequent morphology and adhesion of preosteoblasts. Such experimental conditions lead us to distinguish between anti- and proadhesive substrata. Our results indicate that Fn is not able to induce cell adhesion on antiadhesive materials. On adhesive substrata, Fn did not increase the number of adherent cells but favored their spreading. This work also examined Fn-surface interactions using ELISA immunoassays, fluorescent labeling of Fn, and force spectroscopy with Fn-modified tips. The results provided clear evidence of the advantages and limitations of each technique. All of the techniques confirmed the important adsorption of Fn on proadhesive surfaces for cells. By contrast, antiadhesive substrata for cells avoided Fn adsorption. Furthermore, ELISA experiments enabled us to verify the accessibility of cell binding sites to adsorbed Fn molecules.

Modulating in vitro bone cell and macrophage behavior by immobilized enzymatically tailored pectins.

Previous work has reported the results of a multidisciplinary effort producing a proof-of-concept on the use of pectic polysaccharides in the surface modification of medical devices. This study was designed to learn more about the capability of engineered rhamnogalacturonan-I (RG-I) fractions of apple pectin to control bone cell and macrophage behavior. Thermanox or polystyrene Petri dishes were surface modified with two different modified hairy regions (MHRs) obtained by different enzymatic liquefaction processes of apples differing in relative amounts and lengths of their neutral side chains: (long-haired) MHR-alpha and (short-haired) MHR-B. Bone explants from 14-day-old chick embryos were cultured for 14 days on both pectic substrata. MHR-B promoted cell migration and differentiation, MHR-alpha did not. On MHR-alpha, J774.2 macrophages grew well, their percentage in G1 phase was decreased and in S phase increased, and they did not secrete either proinflammatory-cytokines or nitrites. Contrasting results were gained from macrophages on MHR-B, except for nitrite secretion. Thus, we conclude that coatings from tailored pectins show different biological activities in vitro and are potential innovative candidates for improving the biocompatibility of medical devices in various applications.

Effects on interfacial properties and cell adhesion of surface modification by pectic hairy regions.

Polystyrene Petri dishes, aminated by a plasma deposition process, were surface modified by the covalent linking of two different enzymatically modified hairy regions (HRs) from pectin containing, for example, rhamnogalacturonan-I and xylogalacturonan structural elements. The two polysaccharide preparations share the same structural elements of apple pectin, but the relative amounts and lengths of the neutral side chains present differ. Surface analysis by X-ray photoelectron spectroscopy, contact angle measurement, and atomic force microscope (AFM) force-separation curves was used to characterize the effects on surface chemistry and interfacial forces of the surface modification process. Cell adhesion experiments using continuous L-929 fibroblasts and primary aortic smooth muscle cells were performed to evaluate the effect of the polysaccharide nature on cell adhesion. Results show that immobilization of the HR affects the interfacial field of forces and the cell behavior: "equilibrium" contact angles, obtained by a recently introduced vibrational approach, decrease after HR immobilization reaching a value close to 20 degrees . AFM force-separation curves show a more extended (or softer) interface in the case of the HR bearing longer side chains. Accordingly, depending on the HR preparation, cells shifted from spread morphology and adhesion behavior quantitatively comparable to that observed on conventional tissue culture polystyrene to rounded morphology and significantly lower adhesion. These data show that engineering of plant pectins can be a valuable tool to prepare novel and finely tuned polysaccharides having different chemico-physical and biological properties, to be used in the surface modification of medical devices and materials.