Effect of sandblasting and/or priming treatment on the shear bond strength of self-adhesive resin cement to CAD/CAM blocks.

The aim of this study was to investigate the effect of two different priming agents and/or sandblasting on the shear bond strength of self-adhesive resin cement to the resin composite for core build-up to CAD/CAM blocks. A CAD/CAM ceramic block (GN I CERAMIC BLOCK, GC) and a CAD/CAM resin composite block (CERASMART 270, GC), a self-adhesive resin cement (G-CEM ONE, GC) and two different primers, i.e., a multipurpose primer (MP; G-Multi Primer, GC) and a ceramic primer (CP; Ceramic Primer II, GC), were examined. Five different surface treatments with priming and/or sandblasting and no surface treatment (control) were performed on the block. Disk specimens (6 mm in diameter and 4 mm in thickness) made from core composites were cemented to the blocks after the surface treatments. Then, the 24-h shear bond strength of the resin cement between the block and the resin composite core was determined (n = 15). Sandblasted specimens had greater bond strength than controls for both blocks (p < 0.05). Priming to both blocks significantly increased the bond strength of resin cement compared to that of controls (p < 0.05). Although Weibull moduli were not significantly changed among all surface treatments for both blocks, the strengths with 5% and 95% failure probability of sandblasted and/or primed blocks were estimated to be greater than those of controls. The combination of priming and sandblasting to the CAD/CAM composite and ceramic surface was effective in increasing the bond strength of the resin cement.

Administration of amyloid-ß oligomer to the buccal ganglia may reduce food intake and cholinergic synaptic responses within the feeding neural circuit in Aplysia kurodai.

Anorexia is a behavioral change caused by functional brain disorders in patients with Alzheimer's disease (AD). Amyloid-ß (1-42) oligomers (o-Aß) are possible causative agents of AD that impair signaling via synaptic dysfunction. In this study, we used Aplysia kurodai to study functional disorders of the brain through o-Aß. Administration of o-Aß to the buccal ganglia (feeding brain for oral movements) by surgical treatment significantly reduced food intake for at least five days. Furthermore, we explored the effects of o-Aß on the synaptic function in the feeding neural circuit, focusing on a specific inhibitory synaptic response in jaw-closing motor neurons produced by cholinergic buccal multi-action neurons because we recently found that this cholinergic response decreases with aging, which is consistent with the cholinergic hypothesis for aging. Administration of o-Aß to the buccal ganglia significantly reduced the synaptic response within minutes, whereas administration of amyloid-ß (1-42) monomers did not. These results suggest that o-Aß may impair the cholinergic synapses, even in Aplysia, which is consistent with the cholinergic hypothesis for AD.

Cytotoxicity, Differentiation, and Biocompatibility of Root-End Filling: A Comprehensive Study.

Assessing the biocompatibility of endodontic root-end filling materials through cell line responses is both essential and of utmost importance. This study aimed to the cytotoxicity of the type of cell death through apoptosis and autophagy, and odontoblast cell-like differentiation effects of MTA, zinc oxide-eugenol, and two experimental Portland cements modified with bismuth (Portland Bi) and barium (Portland Ba) on primary cell cultures. Material and methods: The cells corresponded to human periodontal ligament and gingival fibroblasts (HPLF, HGF), human pulp cells (HPC), and human squamous carcinoma cells from three different patients (HSC-2, -3, -4). The cements were inoculcated in different concentrations for cytotoxicity evaluation, DNA fragmentation in electrophoresis, apoptosis caspase activation, and autophagy antigen reaction, odontoblast-like cells were differentiated and tested for mineral deposition. The data were subject to a non-parametric test. Results: All cements caused a dose-dependent reduction in cell viability. Contact with zinc oxide-eugenol induced neither DNA fragmentation nor apoptotic caspase-3 activation and autophagy inhibitors (3-methyladenine, bafilomycin). Portland Bi accelerated significantly (p < 0.05) the differentiation of odontoblast-like cells. Within the limitation of this study, it was concluded that Portland cement with bismuth exhibits cytocompatibility and promotes odontoblast-like cell differentiation. This research contributes valuable insights into biocompatibility, suggesting its potential use in endodontic repair and biomimetic remineralization.

Rapid and quantitative detection of multiple antibodies against SARS-CoV-2 mutant proteins by photo-immobilized microarray.

A rapid automatic quantitative diagnostic system for multiple SARS-CoV-2 mutant protein-specific antibodies was developed using a microarray with photoreactive polymers. Two types of photoreactive polymers, phenylazide and polyoxyethylene, were prepared. The polymers were coated on a plastic plate. Aqueous solutions of mutant virus proteins were microspotted on the coated plate and immobilized by photoirradiation. Virus-specific IgG in the serum or blood was automatically assayed using an instrument that we developed for pipetting, reagent stirring, and washing. The results highly correlated with those of the conventional enzyme-linked immunoassay or immunochromatography. This system was successfully used to test the sera or blood from the patients recovered from the infection and the vaccinated individuals. The recovered individuals had antibodies against the nucleoprotein, in contrast to the vaccinated individuals. The amount of antibodies produced decreased with an increase in virus mutation. Blood collected from the fingertip (5 µL) and a test period of 8 min were sufficient conditions for conducting multiple antibody assays. We believe that our system would facilitate rapid and quantitative automatic assays and aid in the diagnosis of various viral infectious diseases and assessment of the immune status for clinical applications.

Effect of surface treatment of CAD/CAM resin composites on the shear bond strength of self-adhesive resin cement.

This study examined the effects of sandblasting, hydrofluoric acid etching and priming on the shear bond strength of self-adhesive resin cement between seven different CAD/CAM resin composites and a resin composite core material at 24-h after cement mixing. Five surface treatments [control (C), sandblasting (S), priming (P), sandblasting with priming (SP), and 9% HF etching with priming (HFP)] were performed respectively for disc specimens of CAD/CAM blocks. There were no significant differences in bond strength among the C, S, and P, except for one block (p>0.05). SP showed a greater bond strength than S. Weibull moduli were not changed significantly among all treatments for all blocks, whereas the strengths with 5% and 95% failure probability of SP and HFP showed greater values than the others. The bond strengths of HFP were comparable to those of SP. Priming after sandblasting or HF etching could be effective to increase the bond strength of CAD/CAM blocks.

Type of cell death induced by various metal cations in cultured human gingival fibroblasts.

Metal ions are released from casting alloys and cause damage to cell structures and local inflammation. However, the cytotoxic mechanism and the type of cell death induced in human gingival fibroblast (HGF) by contact with dental metals have not been well characterized. Here the cytotoxicity of eight metals against HGF was investigated. Cytoxicity of metals against HGF was in the following order: Ag(NH(3))(2)F (most cytotoxic)>AgCl>CuCl(2)>CuCl, CoCl(2)> NiCl(2)>FeCl(2), FeCl(3) (least cytotoxic). None of the metals showed any apparent hormetic growth stimulation at lower concentrations, except for Ag(NH(3))(2)F at 20 or higher population-doubling level of HGF. The sensitivity of HGF against Ag(NH(3))(2)F was reduced during in vitro aging, similar to previous report with sodium fluoride. Contact with Ag(NH(3))(2)F for only one hour induced irreversible cell death, whereas longer duration of contact with AgCl or CuCl(2) was necessary to induce irreversible cell death. These metals induced neither DNA fragmentation nor caspase-3 activation. Pan-caspase inhibitor (Z-VAD-FMK) and autophagy inhibitors (3-methyladenine, bafilomycin) did not apparently affect the cytotoxicity of metals, when corrected for the effect of inhibitor alone on growth. We also found that Ag(NH(3))(2)F induced much higher cytotoxicity than AgCl in mouse osteoblastic cell line MC3T3-E1, possibly inducing necrosis. These data suggest the importance of cautious application of Ag(NH(3))(2)F to the oral cavity.

Effect of contact with titanium alloys on the proliferation of mouse osteoblastic cells in culture.

This study was aimed at studying the effect of contact with titanium alloy plates of different surface textures on the proliferative capability of mouse osteoblastic MC3T3-E1 cells. First, the proliferation characteristics of MC3T3-E1 cells were investigated. MC3T3-E1 cells showed a high capacity for proliferation and survived for a long period even under nutritionally starved conditions. During logarithmic cell growth, the consumption of Ser, Gln, Val, Ile and Leu increased time-dependently. Contact with an hydoxyapatite (HA)-coated titanium alloy plate resulted in the increase in the recovery of cells from the plate by trypsin, and an increase in the consumption of these amino acids, suggesting enhanced cell proliferation. On the contrary, contact with the sandblasted and anodized titanium alloy plates resulted in the reduction of the recovery of the cells from the plate, but a slight increase in the amino acid consumption, suggesting the tight adhesion of the cells to the plates. This study demonstrates that the present method, based on the amino acid consumption of the cells, is useful for monitoring the cell proliferative capability, without detachment of the cells from the plate. This method may be applicable to the study of the interaction between cells and metal plates.

Type of cell death induced by seven metals in cultured mouse osteoblastic cells.

The use of dental metal alloys in the daily clinic makes it necessary to evaluate the cytotoxicity of eluted metal components against oral cells. However, the cytotoxic mechanism and the type of cell death induced by dental metals in osteoblasts have not been well characterized. This study investigated the cytotoxicity of seven metals against the mouse osteoblastic cell line MC3T3-E1. alpha-MEM was used as a culture medium, since this medium provided much superior proliferation of MC3T3-E1 cells over DMEM. Ag (NH(3))(2)F was the most cytotoxic, followed by CuCl>CuCl(2) >CoCl(2), NiCl(2)>FeCl(3) and FeCl(2) (least toxic). None of the metals showed any apparent growth stimulating effect (so-called 'hormesis') at lower concentrations. A time course study demonstrated that two hours of contact between oral cells and Ag (NH(3))(2)F, CuCl, CoCl(2) or NiCl(2) induced irreversible cell death. Contact with these metals induced a smear pattern of DNA fragmentation without activation of caspase-3. Preincubation of MC3T3-E1 cells with either a caspase inhibitor (Z-VAD-FMK) or autophagy inhibitors (3-methyladenine, bafilomycin) failed to rescue them from metal cytotoxicity. These data suggest the induction of necrotic cell death rather than apoptosis and autophagy by metals in this osteoblastic cell line.

Effect of storage conditions on mechanical properties of resin composite blanks for CAD/CAM crowns.

The objective of this study was to examine the effects of storage conditions on the flexural strengths of resin composite materials for CAD/CAM restorations. Seven commercially available resin composite CAD/CAM blanks were examined. Rectangular specimens (4.0×1.2×4.0 mm) of each material were trimmed from the blanks and subjected to thermal cycling between 5°C and 55°C in deionized water at 10,000 cycles or stored in 37°C deionized water for one week or air for one day (n=10 for each condition). The difference in storage condition between water immersion and thermal cycling did not affect the flexural strengths of resin composite materials for CAD/CAM examined in this study. The resin composite block CS300 made from Bis-MEPP and UDMA showed the greatest flexural strength under all storage conditions and less deterioration of strength by thermal cycling and water immersion among the resin composite blocks tested.

Characteristics of a new dental stone mixed by shaking.

This study evaluated the physical and mechanical properties of a dental stone mixed by shaking. A shake-mix dental stone (Shake! Mix STONE; SM) was characterized in comparison with three conventional dental stones. The fluidity at pouring time, setting time, density, powder particle distributions, linear setting expansion, compressive strength and surface reproduction of detail for dental stones were investigated. The marginal adaptations of cast crowns to dies made with each stone were also determined. SM had higher fluidity and faster setting time than the other stones (p<0.05). The setting expansion of SM at 2 h was lower than those of other two stones (p<0.05). The 15-min compressive strength of SM was higher than the others (p<0.05). There were no significant differences in the marginal adaptations of the cast crowns fabricated using all the stones (p>0.05). In spite of the different mixing method, the shake-mix type dental stone had comparable physical and mechanical properties to the conventional dental stones.

Biological Properties of the Aggregated Form of Chitosan Magnetic Nanoparticle.

BACKGROUND/AIM: Chitosan-coated iron oxide nanoparticles (Chi-NP) have gained attention because of their biocompatibility, biodegradability, low toxicity and targetability under magnetic field. In this study, we investigated various biological properties of Chi-NP. MATERIALS AND METHODS: Chi-NP was prepared by mixing magnetic NP with chitosan FL-80. Particle size was determined by scanning and transmission electron microscopes, cell viability by MTT assay, cell cycle distribution by cell sorter, synergism with anticancer drugs by combination index, PGE2 production in human gingival fibroblast was assayed by ELISA. RESULTS: The synthetic process of Chi-NP from FL-80 and magnetic NP increased the affinity to cells, up to the level attained by nanofibers. Upon contact with the culture medium, Chi-NP instantly formed aggregates and interfered with intracellular uptake. Aggregated Chi-NP did not show cytotoxicity, synergism with anticancer drugs, induce apoptosis (accumulation of subG1 cell population), protect the cells from X-ray-induced damage, nor affected both basal and IL-1ß-induced PGE2 production. CONCLUSION: Chi-NP is biologically inert and shows high affinity to cells, further confirming its superiority as a scaffold for drug delivery.

Azurin-poly(N-isopropylacrylamide) conjugates by site-directed mutagenesis and their thermosensitive behavior in electron-transfer processes.

Searching for "intelligence": Azurin-PNIPAM conjugates were prepared by site-directed mutagenesis followed by protein reconstitution by using imidazole-conjugated poly(N-isopropylacrylamides). The polymer-bound imidazole acts as a ligand in the active site of the blue copper protein azurin. The bioconjugates showed thermosensitive behavior in electron-transfer processes with reduced cytochrome c.

Adhesion and Proliferation of Osteoblastic Cells on Hydroxyapatite-dispersed Ti-based Composite Plate.

BACKGROUND/AIM: Biocompatibility of a novel and more stable hydroxyapatite (HA)-dispersed titanium (Ti)-based composite was investigated, using the mouse osteoblast precursor cell line MC3T3-E1. MATERIALS AND METHODS: Surface of powders and plates was observed by scanning electron microscopy. Distribution of calcium and phosphorus on the surface of the composite was evaluated by an electron beam microanalyzer. Crystal structure was analyzed by X-ray diffractometer. Cell viability was determined by WST-1 assay. RESULTS: HA was stable against the compressive force, shearing stress and sintering heat at 800°C, but it slightly decomposed at 1100°C. With the increase of HA in the composites, the adhesion/proliferation of MC3T3-E1 cells was reduced. The growth inhibition by HA does not seem to be due to materials released from the plate, but rather to the contact to the surface of the plate. Sintering of the HA plate at 1100°C increased the number of attached viable cells. On the other hand, culturing on the synthesized calcium phosphate (apatite containing carbonic acid) increased the number of attached cells to a greater extent. CONCLUSION: HA inhibits the growth of osteoblastic cells, but sintering at 1100°C changes the surface properties of the composite so as to stimulate cell growth.

Effects of surface microtopography of titanium disks on cell proliferation and differentiation of osteoblast-like cells isolated from rat calvariae.

The surface topography of implant fixture is an important factor affecting the osseointegration. We herein demonstrated the effects of surface microtopography of titanium disks on proliferation and differentiation of osteoblast-like cells isolated from rat calvariae. Titanium disks with machine surface (MS), rough surface (R1) and rough surface combined with small cavities (R2) were used in an in vitro culture system. Rough surfaces (R1 and R2 disks) induced stronger osteoblast proliferation and differentiation (BGP and sclerostin mRNA expressions and calcium content) than the smooth surface (MS disk). Furthermore, surface microtopography of R2 disk, which was rough with small cavities, more strongly induced cell proliferation and mineralized bone matrix production than R1 disk. Our results suggest that surface microtopography influences osteoblast proliferation and differentiation. R2 disk, which is rough with small cavities, may be used in implant fixtures to increase osseointegration.

Effect of saliva, epigallocatechin gallate and hypoxia on Cu-induced oxidation and cytotoxicity.

We have previously reported that contact with copper (Cu) induced immediate cell death via an oxidation-involved mechanism in human promyelocytic leukemic HL-60 cells, whereas contact with other metals (Au, Ag, Pd) produced no discernible effect. In the present study, we investigated the conditions under which Cu-induced oxidative stress can be reduced. Contact with a Cu plate in the absence of cells enhanced the rate of consumption of cystine to the greatest extent, followed by that of methionine and histidine. Under hypoxic conditions, the consumption of all these amino acids was significantly reduced. On the other hand, the addition of saliva slightly, but not significantly, reduced the amino acid oxidation. The addition of epigallocatechin gallate (EGCG) slightly, but significantly reduced the consumption of cystine and histidine. The inhibitory effect of EGCG on the methionine consumption was more prominent, especially at higher concentrations. The Cu-induced cell death was significantly inhibited when freshly-prepared human gingival fibroblasts were incubated under hypoxic conditions. The present study demonstrates for the first time that the Cu-induced oxidation and cell death were effectively alleviated under hypoxic conditions.

Rapid changes in amino acid and polyamine metabolism during copper-induced cell death of human gingival fibroblast.

There are very few studies on the interaction between dental alloys and oral tissues. The effect of direct contact with copper (Cu) on the cellular function of human gingival fibroblast (HGF) derived from the periodontal tissues was investigated. When HGF cells were inoculated onto a Cu plate, the viability of HGF cells immediately declined. This was accompanied by vacuolization and chromatin condensation near the nuclear membrane. The intracellular concentration of spermidine and spermine declined, whereas that of putrescine slightly increased. Amino acid analysis of the medium revealed that glutamine was consumed at the greatest rate, amounting to more than half of the total amino acid consumption. Contact with the Cu plate resulted in the complete elimination of glutamine utilization and a simultaneous increase in the production of most amino acids, possibly due to enhanced proteolysis. This was accompanied by a time-dependent increase in the consumption of cystine, possibly due to oxidative reactions, and the enhanced production of glycine and glutamic acid. These data suggest that the contact with the Cu plate induced non-apoptotic cell death in HGF cells, which was tightly coupled with a rapid dysfunction of amino acid and polyamine metabolism.

Effect of water on shear strength of glass ionomer cements for luting.

This study examined the effect of ambient water on the shear strength of glass ionomer cements for luting. Disk specimens were fabricated from four commercially available glass ionomer cements with different setting modes. At one hour after the start of mixing, the specimens were stored at 37 degrees C for 24 and 168 hours in dry condition or in deionized water. Shear strength was then determined using a punch tool. The shear strengths of both conventional cements were significantly greater for the specimens stored dry as compared to those kept in deionized water (p < 0.05). Conversely, resin-modified cement specimens stored dry had significantly lower strength compared to the specimens kept in deionized water (p < 0.05). This was because the ambient water surrounding the resin-modified glass ionomer cements helped increase the shear strength of the cements under the experimental conditions tested.

Biological impact of contact with metals on cells.

In order to investigate the in vivo effect of metals used in dentistry, we investigated the effect of direct contact with metal plates (20 x 20 x 0.5 mm3) made of gold (Au), silver (Ag), copper (Cu) or palladium (Pd) on human promyelocytic leukemic HL-60 cells grown in RPMI1640 medium supplemented with 10% fetal bovine serum. When 0.5 mL of cell suspension was applied to the metal plates, cells were precipitated on the surface of the metal plate within 10 min. Contact with Cu induced a rapid decline of cell viability, the smear pattern of DNA fragmentation, and only minor activation of caspase-3. These effects were accompanied by a progressive decrease in the extracellular concentration of methionine, cysteine and histidine, with a corresponding increase in the concentration of methionine sulfoxide. Electron microscopy showed that contact with Cu induced vacuolization and cytoplasmic damage, prior to nuclear damage, without affecting the cell surface microvilli or mitochondrial integrity. Contact with the other metals did not induce such changes during the 3 h incubation, nor was any hormetic response (beneficial action at lower concentration) observed in the cells with any metals. Addition of N-acetyl-L-cysteine (4-5 mM) almost completely abrogated the Cu-induced cytotoxicity, whereas sodium ascorbate (0.1-0.5 mM) and catalase (6,000(1)-30,000 units/mL) were ineffective. Numerous serum proteins were adsorbed to the Ag plate, while bovine serum albumin was the major protein adsorbed to other metal plates. The present study suggests that direct contact with Cu induced non-apoptotic cell death by an oxidation-involved mechanism. The present model system may be applicable to the study of the interaction between cells and dental restorative materials.

Osteogenesis with cryopreserved marrow mesenchymal cells.

Rat marrow cells were collected from the femurs of 7-week-old male rats (Fischer 344), cultured in 75-cm2 flasks for 10 days, released with trypsin, and then frozen and stored at -196 degrees C in liquid nitrogen. Three months later, the cryopreserved marrow cells were rapidly thawed and cultured in porous hydroxyapatite (HA) blocks in osteogenic medium containing 10 mM sodium beta-glycerophosphate, vitamin C phosphate (82 microg/mL), and 10 nM dexamethasone. After 2 weeks of subculture, cultured cells-HA constructs were subcutaneously implanted into syngeneic rats. The constructs were harvested 2 and 4 weeks postimplantation and examined by histological, biochemical, and genetic analyses. Histological examination showed extensive bone formation in the HA pores. High alkaline phosphatase (ALP) activity and high osteocalcin content were detected in the constructs. Expression of ALP and osteocalcin mRNA was observed at both 2 and 4 weeks. These results indicate that artificial bone prepared with cryopreserved cells had a marked osteogenic capacity.

Influence of monomer content on the viscoelasticity, water sorption and solubility of experimental fluorinated soft lining materials.

The influence of monomer content on the viscoelasticity, water sorption and solubility of experimental fluorinated soft lining materials was investigated. Changes in the viscoelastic properties of the materials were also examined after thermal cycling. Four fluorinated soft lining materials containing different amounts of methoxy diethylene glycol methacrylate (MDGMA) and tridecafluorooctyl methacrylate (13FMA) were prepared. The viscoelastic displacement for specimens containing 13FMA was found to be less than that without 13FMA (p<0.05), and the values tended to decrease with increasing 13FMA content. Reduction of the MDGMA content and addition of 13FMA caused a decrease of water sorption and solubility (p<0.05). Thermal cycling was found to affect the viscoelastic deformation of the specimens without 13FMA and those specimens with relatively large amounts of 13FMA.