Photo- and Thermoresponsive Liquid Marbles Based on Fatty Acid as Phase Change Material Coated by Polypyrrole: From Design to Applications.

Responsive liquid marbles (LMs), which can change their shape, stability, and motion by the application of stimuli, attract a growing interest due to their wide range of applications. Our approach to design photo- and thermoresponsive LMs is based on the use of micrometer-sized fatty acid (FA) particles as phase change material covered with polypyrrole (PPy) overlayers with photothermal property. The core-shell particles were synthesized by aqueous chemical oxidative seeded dispersion polymerization. First, we investigated the effect of the alkyl chain length of FA on the resulting FA/PPy core-shell particles by characterizing their size and its distribution, shape, morphology, chemical composition, and photothermal behavior. Then LMs were fabricated by rolling water droplets on the dried FA/PPy particle powder bed and their light and temperature dual stimuli-responsive nature was studied as a function of the FA alkyl chain length. For all FAs studied, LMs disrupted in a domino manner by light irradiation as the first trigger: the temperature of the FA/PPy particles on the LM surface increased by light irradiation, followed by phase change of FA core of the particles from solid to liquid, resulting in disruption of the LM and release of the encapsulated water. The disruption time was closely correlated to the melting point of FA linked to the alkyl chain length and light irradiation power, and it could be controlled and tuned easily between quasi instantaneous and approximately 10 s. Finally, we showed potential applications of the LMs as a carrier for controlled delivery and release of substances and a sensor.

[Relationship between the swallowing function and jaw-opening muscle strength in elderly cerebrovascular disease patients].

AIM: In this study, we aimed to clarify the relationship between the swallowing function and the jaw-opening force after cerebrovascular disease. METHODS: Elderly patients with a history of cerebrovascular disease with swallowing disability were enrolled in the present study. The swallowing function was evaluated using the Dysphagia Severity Scale (DSS), and the jaw-opening force was measured using Jaw-Opening Sthenometer (TK2014). The correlation between the DSS and jaw-opening force was analyzed using Spearman's correlation coefficient. Patients were also classified into three groups according to the DSS: normal, dysphagia, and aspiration groups. The jaw-opening forces of the three groups were compared using the Kruskal-Wallis test. RESULTS: Fifty-two patients (27 women, average age 78.8±8.2 years) were recruited. A significant negative correlation was found between the patient age and jaw-opening force in all subjects (r=-0.362, p=0.008) as well as in men (r=-0.548, p=0.005). A significant positive correlation was found between the DSS and jaw-opening force in all subjects (r=0.560, p=0.000) and in both men (r=0.636, p=0.001) and women (r=0.587, p=0.001). The jaw-opening force of the aspiration group was significantly lower than that of the normal group in all subjects (p=0.006), as well as in men (p=0.024) and women (p=0.015). CONCLUSIONS: The DSS and jaw-opening force may have a significant positive correlation. Furthermore, it was shown that the jaw-opening force of the aspiration group was significantly lower than that of the normal-swallowing group.

Microcapsules fabricated from liquid marbles stabilized with latex particles.

Millimeter- and centimeter-sized "liquid marbles" were readily prepared by rolling water droplets on a powder bed of dried submicrometer-sized polystyrene latex particles carrying poly[2-(diethylamino)ethyl methacrylate] hairs (PDEA-PS). Scanning electron microscopy studies indicated that flocs of the PDEA-PS particles were adsorbed at the surface of these water droplets, leading to stable spherical liquid marbles. The liquid marbles were deformed as a result of water evaporation to adopt a deflated spherical geometry, and the rate of water evaporation decreased with increasing atmospheric relative humidity. Conversely, liquid marbles formed using saturated aqueous LiCl solution led to atmospheric water absorption by the liquid marbles and a consequent mass increase. The liquid marbles can be transformed into polymeric capsules containing water by exposure to solvent vapor: the PDEA-PS particles were plasticized with the solvent vapor to form a polymer film at the air-water interface of the liquid marbles. The polymeric capsules with aqueous volumes of 250 µL or less kept their oblate ellipsoid/near spherical shape even after complete water evaporation, which confirmed that a rigid polymeric capsule was successfully formed. Both the rate of water evaporation from the pure water liquid marbles and the rate of water adsorption into the aqueous LiCl liquid marbles were reduced with an increase of solvent vapor treatment time. This suggests that the number and size of pores within the polymer particles/flocs on the liquid marble surface decreased due to film formation during exposure to organic solvent vapor. In addition, organic-inorganic composite capsules and colloidal crystal capsules were fabricated from liquid marbles containing aqueous SiO2 dispersions.

Formation of Pickering emulsions stabilized via interaction between nanoparticles dispersed in aqueous phase and polymer end groups dissolved in oil phase.

The influence of end groups of a polymer dissolved in an oil phase on the formation of a Pickering-type hydroxyapatite (HAp) nanoparticle-stabilized emulsion and on the morphology of HAp nanoparticle-coated microspheres prepared by evaporating solvent from the emulsion was investigated. Polystyrene (PS) molecules with varying end groups and molecular weights were used as model polymers. Although HAp nanoparticles alone could not function as a particulate emulsifier for stabilizing dichloromethane (oil) droplets, oil droplets could be stabilized with the aid of carboxyl end groups of the polymers dissolved in the oil phase. Lower-molecular-weight PS molecules containing carboxyl end groups formed small droplets and deflated microspheres, due to the higher concentration of carboxyl groups on the droplet/microsphere surface and hence stronger adsorption of the nanoparticles at the water/oil interface. In addition, Pickering-type suspension polymerization of styrene droplets stabilized by PS molecules containing carboxyl end groups successfully led to the formation of spherical HAp-coated microspheres.

Polypyrrole-palladium nanocomposite coating of micrometer-sized polymer particles toward a recyclable catalyst.

A range of near-monodisperse, multimicrometer-sized polymer particles has been coated with ultrathin overlayers of polypyrrole-palladium (PPy-Pd) nanocomposite by chemical oxidative polymerization of pyrrole using PdCl(2) as an oxidant in aqueous media. Good control over the targeted PPy-Pd nanocomposite loading is achieved for 5.2 µm diameter polystyrene (PS) particles, and PS particles of up to 84 µm diameter can also be efficiently coated with the PPy-Pd nanocomposite. The seed polymer particles and resulting composite particles were extensively characterized with respect to particle size and size distribution, morphology, surface/bulk chemical compositions, and conductivity. Laser diffraction studies of dilute aqueous suspensions indicate that the polymer particles disperse stably before and after nanocoating with the PPy-Pd nanocomposite. The Fourier transform infrared (FT-IR) spectrum of the PS particles coated with the PPy-Pd nanocomposite overlayer is dominated by the underlying particle, since this is the major component (>96% by mass). Thermogravimetric and elemental analysis indicated that PPy-Pd nanocomposite loadings were below 6 wt %. The conductivity of pressed pellets prepared with the nanocomposite-coated particles increased with a decrease of particle diameter because of higher PPy-Pd nanocomposite loading. "Flattened ball" morphologies were observed by scanning/transmission electron microscopy after extraction of the PS component from the composite particles, which confirmed a PS core and a PPy-Pd nanocomposite shell morphology. X-ray diffraction confirmed the production of elemental Pd and X-ray photoelectron spectroscopy studies indicated the existence of elemental Pd on the surface of the composite particles. Transmission electron microscopy confirmed that nanometer-sized Pd particles were distributed in the shell. Near-monodisperse poly(methyl methacrylate) particles with diameters ranging between 10 and 19 µm have been also successfully coated with PPy-Pd nanocomposite, and stable aqueous dispersions were obtained. The nanocomposite particles functioned as an efficient catalyst for the aerobic oxidative homocoupling reaction of 4-carboxyphenylboronic acid in aqueous media for the formation of carbon-carbon bonds. The composite particles sediment in a short time (

Liquid marbles prepared from pH-responsive sterically stabilized latex particles.

Submicrometer-sized pH-responsive sterically stabilized polystyrene (PS) latex particles were synthesized by dispersion polymerization in isopropyl alcohol with a poly[2-(diethylamino)ethyl methacrylate]- (PDEA-) based macroinitiator. These PDEA-PS latexes were extensively characterized with respect to their particle size distribution, morphology, chemical composition, and pH-responsive behavior. Millimeter- and centimeter-sized "liquid marbles" with aqueous volumes varying between 15 µL and 2.0 mL were readily prepared by rolling water droplets on the dried PDEA-PS latex powder. The larger liquid marbles adopted nonspherical shapes due to gravitational forces; analysis of this deformation enabled the surface tension to be estimated. Scanning electron microscopy and fluorescence microscopy studies indicated that flocs of the PDEA-PS particles were adsorbed at the surface of these water droplets, leading to stable liquid marbles. The relative mechanical integrity of the liquid marbles prepared from alkaline aqueous solution (pH 10) was higher than those prepared from acidic aqueous solution (pH 2) as judged by droplet roller experiments. These liquid marbles exhibited long-term stability (over 1 h) when transferred onto the surface of liquid water, provided that the solution pH of the subphase was above pH 8. In contrast, the use of acidic solutions led to immediate disintegration of these liquid marbles within 10 min, with dispersal of the PDEA-PS latex particles in the aqueous solution. Thus the critical minimum solution pH required for long-term liquid marble stability correlates closely with the known pK(a) value of 7.3 for the PDEA stabilizer chains. Stable liquid marbles were also successfully prepared from aqueous Gellan gum solution and glycerol.

Pickering-type water-in-oil-in-water multiple emulsions toward multihollow nanocomposite microspheres.

Multihollow hydroxyapatite (HAp)/poly(L-lactic acid) (PLLA) nanocomposite microspheres were readily fabricated by solvent evaporation from a "Pickering-type" water-in-(dichloromethane solution of PLLA)-in-water multiple emulsion stabilized with HAp nanoparticles. The multiple emulsion was stabilized with the aid of PLLA molecules used as a wettability modifier for HAp nanoparticles, although HAp nanoparticles did not work solely as particulate emulsifiers for Pickering-type emulsions consisting of pure dichloromethane and water. The interaction between PLLA and HAp nanoparticles at the oil-water interfaces plays a crucial role toward the preparation of stable multiple emulsion and multihollow microspheres.

Synthesis of pH-responsive nanocomposite microgels with size-controlled gold nanoparticles from ion-doped, lightly cross-linked poly(vinylpyridine).

The synthesis of composite microgels consisting of pH-responsive latexes with gold nanoparticles was investigated along with the optical properties of the products. The gold nanoparticles were deposited by wet chemical reduction from gold ions adsorbed in cross-linked poly(2-vinylpyridine) latexes, by which the mean particle size of the gold nanoparticles could be systematically controlled over a range of 10-30 nm simply by varying the reduction rate. Microscopic analysis showed that the gold nanoparticles were formed only on the surface of the microgels, resulting from diffusion of the gold ions from the interior to the surface of the microgels during reduction treatment. The resulting nanocomposites preserved the pH-responsive properties of the pure latexes. The degree of plasmon coupling, originating from dipole interactions among the gold nanoparticles, was dependent on the size of the nanoparticles and could be reversibly controlled by varying the pH of the aqueous solution. The process allowed independent control of the size and interparticle distance among gold nanoparticles, an ability that is important in increasing the fundamental understanding of the structure-dependent properties of gold nanoparticles and also for biological applications using functionalized composite latexes/microgels.

Synthesis and characterization of polypyrrole-palladium nanocomposite-coated latex particles and their use as a catalyst for Suzuki coupling reaction in aqueous media.

Polypyrrole-palladium (PPy-Pd) nanocomposite was deposited in situ from aqueous solution onto micrometer-sized polystyrene (PS) latex particles. The PS seed particles and resulting composite particles were extensively characterized with respect to particle size and size distribution, morphology, surface/bulk chemical compositions, and conductivity. PPy-Pd nanocomposite loading onto the PS seed latex particles was systematically controlled over a wide range (10-60 wt %) by changing the weight ratio of the PS latex and PPy-Pd nanocomposite. Pd loading was also controlled between 6 and 33 wt %. The conductivity of pressed pellets increased with the PPy-Pd nanocomposite loading and four-point probe measurements indicated conductivities ranging from 3.0 x 10(-1) to 7.9 x 10(-6) S cm(-1). Hollow capsule and broken egg-shell morphologies were observed by scanning/transmission electron microscopy after extraction of the PS component from the composite particles, which confirmed a PS core and PPy-Pd nanocomposite shell morphology. X-ray diffraction confirmed that the production of elemental Pd and X-ray photoelectron spectroscopy indicated the existence of elemental Pd on the surface of the composite particles. Transmission electron microscopy confirmed that nanometer-sized Pd particles were distributed in the shell. The nanocomposite particles functioned as an efficient catalyst for Suzuki-type coupling reactions in aqueous media for the formation of carbon-carbon bonds.

Electroless nickel plating on polymer particles.

Near-monodisperse, micrometer-sized polypyrrole-palladium (PPy-Pd) nanocomposite-coated polystyrene (PS) particles have been coated with Ni overlayers by electroless plating in aqueous media. Good control of the Ni loading was achieved for 1.0 µm diameter PPy-Pd nanocomposite-coated PS particles and particles of up to 20 µm in diameter could also be efficiently coated with the Ni. Laser diffraction particle size analysis studies of dilute aqueous suspensions indicated that an additional water-soluble colloidal stabilizer, poly(N-vinyl pyrrolidone), in the electroless plating reaction media was crucial to obtain colloidally stable Ni-coated composite particles. Elemental microanalysis indicated that the Ni loading could be controlled between 61 and 78 wt% for the 1.0 µm-sized particles. Scanning/transmission electron microscopy studies revealed that the particle surface had a flaked morphology after Ni coating. Spherical capsules were obtained after extraction of the PS component from the Ni-coated composite particles, which indicated that the shell became rigid after Ni coating. X-ray diffraction confirmed the production of elemental Ni and X-ray photoelectron spectroscopy studies indicated the existence of elemental Ni on the surface of the composite particles.

Effect of interfacial serum proteins on melanoma cell adhesion to biodegradable poly(l-lactic acid) microspheres coated with hydroxyapatite.

We have measured the interaction forces between a murine melanoma cell and a poly(l-lactic acid) (PLLA) microsphere coated with/without hydroxyapatite (HAp) nanoparticles (i.e., an HAp/PLLA or a bare PLLA microsphere) in a serum-free culture medium, using atomic force microscopy (AFM) with colloid probe technique, in order to investigate how the HAp-nanoparticle coating as well as interfacial serum proteins influence the cell-microsphere adhesion. The cell adhesion force of the HAp/PLLA microspheres was 1.4-fold stronger than that of the bare PLLA microspheres. When the microspheres were pretreated with a culture medium supplemented with 10% fetal bovine serum, the cell adhesion force of the HAp/PLLA microspheres was increased by a factor of 2.1; in contrast, no change was observed in the cell adhesion force of the bare PLLA microspheres before/after the pretreatment. Indeed, the cell adhesion force of the HAp/PLLA was 2.8-fold larger than that of the bare PLLA after the pretreatment. Additionally, we have investigated the effect of interfacial serum proteins on the zeta potentials of these microspheres. On the basis of the obtained results, possible mechanism of cell adhesion to the HAp/PLLA and bare PLLA microspheres in the presence/absence of the interfacial serum proteins is discussed.

Hydroxyapatite-armored poly(ε-caprolactone) microspheres and hydroxyapatite microcapsules fabricated via a Pickering emulsion route.

Hydroxyapatite (HAp) nanoparticle-armored poly(ε-caprolactone) (PCL) microspheres were fabricated via a "Pickering-type" emulsion solvent evaporation method in the absence of any molecular surfactants. It was clarified that the interaction between carbonyl/carboxylic acid groups of PCL and the HAp nanoparticles at an oil-water interface played a crucial role in the preparation of the stable Pickering-type emulsions and the HAp nanoparticle-armored microspheres. The HAp nanoparticle-armored PCL microspheres were characterized in terms of size, size distribution, morphology, and chemical compositions using scanning electron microscopy, laser diffraction, energy dispersive X-ray microanalysis, and thermogravimetric analysis. The presence of HAp nanoparticles at the surface of the microspheres was confirmed by scanning electron microscopy and energy dispersive X-ray microanalysis. Pyrolysis of the PCL cores led to the formation of the corresponding HAp hollow microcapsules.

Biomimetic synthesis of raspberry-like hybrid polymer-silica core-shell nanoparticles by templating colloidal particles with hairy polyamine shell.

The nanoparticles composed of polystyrene core and poly[2-(diethylamino)ethyl methacrylate] (PDEA) hairy shell were used as colloidal templates for in situ silica mineralization, allowing the well-controlled synthesis of hybrid silica core-shell nanoparticles with raspberry-like morphology and hollow silica nanoparticles by subsequent calcination. Silica deposition was performed by simply stirring a mixture of the polymeric core-shell particles in isopropanol, tetramethyl orthosilicate (TMOS) and water at 25 degrees C for 2.5h. No experimental evidence was found for nontemplated silica formation, which indicated that silica deposition occurred exclusively in the PDEA shell and formed PDEA-silica hybrid shell. The resulting hybrid silica core-shell particles were characterized by transmission electron microscopy (TEM), thermogravimetry, aqueous electrophoresis, and X-ray photoelectron spectroscopy. TEM studies indicated that the hybrid particles have well-defined core-shell structure with raspberry morphology after silica deposition. We found that the surface nanostructure of hybrid nanoparticles and the composition distribution of PDEA-silica hybrid shell could be well controlled by adjusting the silicification conditions. These new hybrid core-shell nanoparticles and hollow silica nanoparticles would have potential applications for high-performance coatings, encapsulation and delivery of active organic molecules.

Hydroxyapatite nanoparticles as particulate emulsifier: fabrication of hydroxyapatite-coated biodegradable microspheres.

Hydroxyapatite (HAp) nanoparticle-coated micrometer-sized poly(l-lactic acid) (PLLA) microspheres were fabricated via a "Pickering-type" emulsion route in the absence of any molecular surfactants. Stable oil-in-water emulsions were prepared using 40 nm HAp nanoparticles as a particulate emulsifier and a dichloromethane (CH(2)Cl(2)) solution of PLLA as an oil phase. It was clarified that the interaction between carbonyl/carboxylic acid groups of PLLA and the HAp nanoparticles at the CH(2)Cl(2)-water interface played a crucial role to prepare the stable Pickering-type emulsion. The HAp nanoparticle-coated PLLA microspheres were fabricated by the evaporation of CH(2)Cl(2) from the emulsion and characterized in terms of size, particle size distribution, and morphology using scanning/transmission electron microscopes. Scanning electron microscopy study and ultrathin cross section observation using transmission electron microscopy confirmed adsorption of the HAp nanoparticles only at the surface of the PLLA microspheres. Cell-adhesion experiments suggested the HAp nanoparticles on the surface of the PLLA microspheres promoted the cell adhesion and spreading.