Amorphous Solid Dispersion Formation for Enhanced Release Performance of Racemic and Enantiopure Praziquantel.

Praziquantel (PZQ) is the treatment of choice for schistosomiasis, which affects more than 250 million people globally. Commercial tablets contain the crystalline racemic compound (RS-PZQ) which limits drug dissolution and oral bioavailability and can lead to unwanted side effects and poor patient compliance due to the presence of the S-enantiomer. While many approaches have been explored for improving PZQ's dissolution and oral bioavailability, studies focusing on investigating its release from amorphous solid dispersions (ASDs) have been limited. In this work, nucleation induction time experiments were performed to identify suitable polymers for preparing ASDs using RS-PZQ and R-PZQ, the therapeutically active enantiomer. Cellulose-based polymers, hydroxypropyl methylcellulose acetate succinate (HPMCAS, MF grade) and hydroxypropyl methylcellulose (HPMC, E5 LV grade), were the best crystallization inhibitors for RS-PZQ in aqueous media and were selected for ASD preparation using solvent evaporation (SE) and hot-melt extrusion (HME). ASDs prepared experimentally were subjected to X-ray powder diffraction to verify their amorphous nature and a selected number of ASDs were monitored and found to remain physically stable following several months of storage under accelerated-stability testing conditions. SE HPMCAS-MF ASDs of RS-PZQ and R-PZQ showed faster release than HPMC E5 LV ASDs and maintained good performance with an increase in drug loading (DL). HME ASDs of RS-PZQ formulated using HPMCAS-MF exhibited slightly enhanced release compared to that of SE ASDs. SE HPMCAS-MF ASDs showed a maximum release increase of the order of 6 times compared to generic and branded (Biltricide) PZQ tablets. More importantly, SE R-PZQ ASDs with HPMCAS-MF released the drug as effectively as RS-PZQ or better, depending on the DL used. These findings have significant implications for the development of commercial PZQ formulations comprised solely of the R-enantiomer, which can result in mitigation of the biopharmaceutical and compliance issues associated with current commercial tablets.

Impact of Gastric pH Variations on the Release of Amorphous Solid Dispersion Formulations Containing a Weakly Basic Drug and Enteric Polymers.

Enteric polymers are widely used in amorphous solid dispersion (ASD) formulations. The aim of the current study was to explore ASD failure mechanisms across a wide range of pH conditions that mimic in vivo gastric compartment variations where enteric polymers such as hydroxypropyl methylcellulose phthalate (HPMCP) and hydroxypropyl methylcellulose acetate succinate (HPMCAS) are largely insoluble. Delamanid (DLM), a weakly basic drug used to treat tuberculosis, was selected as the model compound. Both DLM free base and the edisylate salt were formulated with HPMCP, while DLM edisylate ASDs were also prepared with different grades of HPMCAS. Two-stage release testing was conducted with the gastric stage pH varied between pH 1.6 and 5.0, prior to transfer to intestinal conditions of pH 6.5. ASD particles were collected following suspension in the gastric compartment and evaluated using X-ray powder diffraction and scanning electron microscopy. Additional samples were also evaluated with polarized light microscopy. In general, ASDs with HPMCP showed improved overall release for all testing conditions, relative to ASDs with HPMCAS. ASDs with the edisylate salt likewise outperformed those with DLM free base. Impaired release for certain formulations at intestinal pH conditions was attributed to surface drug crystallization that initiated during suspension in the gastric compartment where the polymer is insoluble; crystallization appeared more extensive for HPMCAS ASDs. These findings suggest that gastric pH variations should be evaluated for ASD formulations containing weakly basic drugs and enteric polymers.

Fed- and Fasted-State Performance of Pretomanid Amorphous Solid Dispersions Formulated with an Enteric Polymer.

Weakly acid polymers with pH-responsive solubility are being used with increasing frequency in amorphous solid dispersion (ASD) formulations of drugs with low aqueous solubility. However, drug release and crystallization in a pH environment where the polymer is insoluble are not well understood. The aim of the current study was to develop ASD formulations optimized for release and supersaturation longevity of a rapidly crystallizing drug, pretomanid (PTM), and to evaluate a subset of these formulations in vivo. Following screening of several polymers for their ability to inhibit crystallization, hypromellose acetate succinate HF grade (HPMCAS-HF; HF) was selected to prepare PTM ASDs. In vitro release studies were conducted in simulated fasted- and fed-state media. Drug crystallization in ASDs following exposure to dissolution media was evaluated by powder X-ray diffraction, scanning electron microscopy, and polarized light microscopy. In vivo oral pharmacokinetic evaluation was conducted in male cynomolgus monkeys (n = 4) given 30 mg PTM under both fasted and fed conditions in a crossover design. Three HPMCAS-based ASDs of PTM were selected for fasted-state animal studies based on their in vitro release performance. Enhanced bioavailability was observed for each of these formulations relative to the reference product that contained crystalline drug. The 20% drug loading PTM-HF ASD gave the best performance in the fasted state, with subsequent dosing in the fed state. Interestingly, while food improved drug absorption of the crystalline reference product, the exposure of the ASD formulation was negatively impacted. The failure of the HPMCAS-HF ASD to enhance absorption in the fed state was hypothesized to result from poor release in the reduced pH intestinal environment resulting from the fed state. In vitro experiments confirmed a reduced release rate under lower pH conditions, which was attributed to reduced polymer solubility and an enhanced crystallization tendency of the drug. These findings emphasize the limitations of in vitro assessment of ASD performance using standardized media conditions. Future studies are needed for improved understanding of food effects on ASD release and how this variability can be captured by in vitro testing methodologies for better prediction of in vivo outcomes, in particular for ASDs formulated with enteric polymers.

CD9 monoclonal antibody-conjugated PEGylated liposomes for targeted delivery of rapamycin in the treatment of cellular senescence.

Premature cellular senescence refers to the state of irreversible cell cycle arrest due to DNA damage or other stresses. In this study, CD9 monoclonal antibody (CD9mAb) was successfully conjugated to the surface of PEGylated liposomes for targeted delivery of rapamycin (LR-CD9mAb) to overcome senescence of CD9 receptor-overexpressing cells. LR-CD9mAb has a small particle size (143.3 ± 2.4 nm), narrow size distribution (polydispersity index: 0.220 ± 0.036), and negative zeta potential (-14.6 ± 1.2 mV). The uptake of CD9-targeted liposomes by premature senescent human dermal fibroblasts (HDFs) was higher than that by young HDFs, as displayed by confocal microscopic images. The senescence might not be reversed by treatment with rapamycin; however, the drug promoted cell proliferation and reduced the number of cells that expressed the senescence-associated-ß-galactosidase (SA-ß-gal). These effects were further confirmed by cell viability, cell cycle, and Western blotting analyses. Moreover, CD9-targeted liposomes showed better anti-senescence activity, in comparison with free rapamycin or the conventional liposomal formulation, suggesting the potential application of this system in further in vivo studies.

Developing combination of artesunate with paclitaxel loaded into poly-d,l-lactic-co-glycolic acid nanoparticle for systemic delivery to exhibit synergic chemotherapeutic response.

OBJECTIVES: Paclitaxel (PTX) has been indicated for the treatment of a variety of solid tumors, whereas artesunate (ART) has been reported to have the potential for use in combination chemotherapy. In this study, the combination of ART and PTX was prepared in nanoparticle to induce the synergic effect and improve therapeutic efficiency in treatment of breast cancer. METHODS: Dual anticancer agents (PTX and ART) were loaded into Poly-D,L-lactic-co-glycolic acid (PLGA) nanoparticle (NP) by solvent evaporation technique from oil-in-water emulsion, stabilized with Tween 80. Physicochemical properties of obtained nanoparticles (PTX-ART-NPs) were characterized including particle size (Z), polydispersity index (PDI), zeta potentials (ZP), encapsulation efficiency (EE), and in-vitro drug release. Combination index (CI) was calculated to determine the synergic effect of the combination and select the best ratio of ART and PTX. The final NPs analyzed intracellular uptake, cytotoxicity assay, and apoptosis study. RESULTS: The final NP had a small size (around 120 nm) with a narrow size distribution (PDI <0.3). EE values for each drug were 87.8 ± 1.1% and 99.5 ± 0.1% for ART and PTX, respectively, and drugs were released from NPs in a controlled release pattern. All combinations of PTX and ART had CI values under 1, which confirmed the synergic effects. Meanwhile, NP preparation increased cytotoxicity on three breast cancer cell-lines comparable to free drugs. CONCLUSIONS: Combination of ART- and PTX-loaded PLGA NP showed promising results for anticancer therapy, especially for breast cancer treatment.

Development and Evaluation of Artesunate-Loaded Chitosan-Coated Lipid Nanocapsule as a Potential Drug Delivery System Against Breast Cancer.

Artesunate (ART)--a well-known hydrophobic anti-malarial agent was incorporated in a polymer-lipid hybrid nanocolloidal system for anti-cancer therapeutic. The lipid negatively charged nanoemulsion was formulated by modified hot homogenization method then covered with positively charged chitosan via electrostatic interaction to obtain chitosan-coated lipid nanocapsule (ART-CLN). Physical properties of the system were characterized in terms of size, charge, morphology, drug loading capacity, and physical state. In addition, anti-cancer activities were confirmed by conducting MTT assay for ART and ART-CLN on different cancer cell lines. Obtained ART-CLN after coating chitosan revealed positive charge (13.2 ± 0.87 mV), small particle size (160.9 ± 3.5 nm), and spherical shape. High drug entrapment efficiency (95.49 ± 1.13%) and sustained release pattern were observed. Moreover, the good cellular uptake was recorded by flow cytometry as well as confocal image. Finally, ART-CLN exhibited stronger anti-cancer activity than free ART on breast cancer cell lines (MCF-7, MDA-MB-231). These results suggested that by loading ART into lipid core of polymer-lipid hybrid carrier, the activity and physical stability of ART can be significantly increased for cancer chemotherapy.

Enteric coating of tablets containing an amorphous solid dispersion of an enteric polymer and a weakly basic drug: A strategy to enhance in vitro release.

Recent work has highlighted that amorphous solid dispersions (ASDs) containing delamanid (DLM) and an enteric polymer, hypromellose phthalate (HPMCP), appear to be susceptible to crystallization during immersion in simulated gastric fluids. The goal of this study was to minimize contact of the ASD particles with the acidic media via application of an enteric coating to tablets containing the ASD intermediate, and improve the subsequent drug release at higher pH conditions. DLM ASDs were prepared with HPMCP and formulated into a tablet that was then coated with a methacrylic acid copolymer. Drug release was studied in vitro using a two-stage dissolution test where the pH of the gastric compartment was altered to reflect physiological variations. The medium was subsequently switched to simulated intestinal fluid. The gastric resistance time of the enteric coating was probed over the pH range of 1.6-5.0. The enteric coating was found to be effective at protecting the drug against crystallization in pH conditions where HPMCP was insoluble. Consequently, the variability in drug release following gastric immersion under pH conditions reflecting different prandial states was notably reduced when compared to the reference product. These findings support closer examination of the potential for drug crystallization from ASDs in the gastric environment where acid-insoluble polymers may be less effective as crystallization inhibitors. Further, addition of a protective enteric coating appears to provide a promising remediation strategy to prevent crystallization at low pH environments, and may mitigate variability associated with prandial state that arises due to pH changes.

Atomic Layer Coating to Inhibit Surface Crystallization of Amorphous Pharmaceutical Powders.

Preventing crystallization is a primary concern when developing amorphous drug formulations. Recently, atomic layer coatings (ALCs) of aluminum oxide demonstrated crystallization inhibition of high drug loading amorphous solid dispersions (ASDs) for over 2 years. The goal of the current study was to probe the breadth and mechanisms of this exciting finding through multiple drug/polymer model systems, as well as particle and coating attributes. The model ASD systems selected provide for a range of hygroscopicity and chemical functional groups, which may contribute to the crystallization inhibition effect of the ALC coatings. Atomic layer coating was performed to apply a 5-25 nm layer of aluminum oxide or zinc oxide onto ASD particles, which imparted enhanced micromeritic properties, namely, reduced agglomeration and improved powder flowability. ASD particles were stored at 40 °C and a selected relative humidity level between 31 and 75%. Crystallization was monitored by X-ray powder diffraction and scanning electron microscopy (SEM) up to 48 weeks. Crystallization was observable by SEM within 1-2 weeks for all uncoated samples. After ALC, crystallization was effectively delayed or completely inhibited in some systems up to 48 weeks. The delay achieved was demonstrated regardless of polymer hygroscopicity, presence or absence of hydroxyl functional groups in drugs and/or polymers, particle size, or coating properties. The crystallization inhibition effect is attributed primarily to decreased surface molecular mobility. ALC has the potential to be a scalable strategy to enhance the physical stability of ASD systems to enable high drug loading and enhanced robustness to temperature or relative humidity excursions.

Local release of NECA (5'-(N-ethylcarboxamido)adenosine) from implantable polymeric sheets for enhanced islet revascularization in extrahepatic transplantation site.

Clinical intraportal pancreatic islet infusion is popular for treating type I diabetes. However, multiple doses of islets and anti-rejection protocols are needed to compensate for early large cell losses post-infusion due to the harsh hepatic environment. Thus, extrahepatic sites are utilized to enable efficient islet engraftment and reduce islet mass. Here, we reported an effective islet revascularization protocol that was based on the co-implantation of islet/fibrin gel construct with poly(lactic-co-glycolic) acid sheet releasing NECA (5'-(N-ethylcarboxamido) adenosine; a potent agonist of adenosine) into mouse epididymal fat pad. Thin, flexible sheets (d = 4 mm) prepared by simple casting exhibited sustained NECA release for up to 21 days, which effectively improved early islet engraftment with a median diabetic reversal time of 18.5 days. Western blotting revealed the facilitative effect of NECA on VEGF expression from islets in vitro and from grafts in vivo. In addition, NECA directly promoted the angiogenic activities of islet-derived endothelial cells by enhancing their proliferation and vessel-like tube formation. As a result, neovasculatures were effectively formed in the engrafted islet vicinity, as evidenced by vasculature imaging and immunofluorescence. Taken together, we suggest NECA-releasing PLGA sheets offer a safe and effective drug delivery system that enhances islet engraftment while reducing islet mass at extrahepatic sites for clinical relevance.

Reprogramming the T cell response to cancer by simultaneous, nanoparticle-mediated PD-L1 inhibition and immunogenic cell death.

In this study, dual drug-loaded nanoparticles were constructed to co-deliver low-dose doxorubicin (DOX) and miR-200c (DOX/miR-NPs) to inhibit programmed death-1 receptor (PD-L1) expression and trigger immunogenic cell death (ICD) in cancer cells. Two block copolymers, folic acid (FA)-conjugated PLGA-PEG (PLGA-PEG-FA) and PLGA-PEI, were formulated as folate-targeted NPs and loaded with DOX and miR-200c. The NPs, which were formed as nanosize objects (110.4 ± 2.1) with narrow size distribution (0.19 ± 0.02), effectively protected the miR-200c from degradation in serum. Modifying the NPs with FA increased not only their uptake by cancer cells in vitro but also their accumulation in tumor microenvironments in vivo, as compared with those properties of non-FA-modified NPs. The DOX/miR-NPs also exhibited efficacious inhibition of PD-L1 expression and robust induction of ICD in cancer cells in vitro and in vivo, resulting in increased dendritic cell maturation and CD8+ T cell response towards cancer cells. Furthermore, tumor growth was significantly inhibited by folate-targeted NPs loaded with the low-dose DOX/miR-200c combination, but not by treatments with free DOX, miR-NPs or DOX-NPs. Thus, our results suggest that simultaneous PD-L1 inhibition via microRNAs and the induction of an immunogenic tumor microenvironment via low-dose cytotoxic drugs may improve cancer therapy efficacy.

Transferrin-conjugated pH-sensitive platform for effective delivery of porous palladium nanoparticles and paclitaxel in cancer treatment.

Porous palladium (Pd) nanoparticles have garnered great research attention due to their potential anticancer activity and photothermal effect. In this study, a transferrin-conjugated pH-sensitive platform (Tf-PPP), comprising porous Pd nanoparticles (PdNPs) and paclitaxel (PTX), was successfully developed for combined chemo-phototherapy. Tf-PPPs have a small size of 164.6 ± 8.7 nm, PDI of 0.278 ± 0.029, and negative charge (-13.2 ± 1.8 mV). Poly(acrylic acid)-poly(ethylene oxide) (PAA-PEO), a pH sensitive polymer, was used to achieve pH-dependent drug release from nanoparticles. Transferrin (Tf) conjugated on the surface of nanoplatforms could enhance the cellular uptake and prolong nanoparticle accumulation in the tumor site. The combination of phototherapy induced by PdNPs and chemotherapeutic agent (PTX) could exhibit synergistic anticancer activities. Consistent findings were observed in both in vitro experiments including cytotoxicity, live/dead assay, and assessment of apoptotic protein levels, and in vivo antitumor study in MCF-7 tumor-bearing mice, with results decreasing in the following order: Tf-PPPs + NIR > Tf-PPPs > PPPs + NIR > PPPs > PTX > PdNPs. These findings suggest that the administration of Tf-PPPs, followed by NIR irradiation could be a promising strategy in the treatment of cancer.

Engineering "cell-particle hybrids" of pancreatic islets and bioadhesive FK506-loaded polymeric microspheres for local immunomodulation in xenogeneic islet transplantation.

Host immune response remains an obstacle in cell-replacement therapy for treating type I diabetes. Long-term systemic immunosuppression results in suboptimal efficacy and adverse reactions. Thus, "cell-particle hybrids" of pancreatic islets and tissue-adhesive, polydopamine-coated, FK506-loaded biodegradable microspheres (PD-FK506-MS) were developed to locally modulate the immune response at the transplantation site. Coating of FK506-MS with PD enabled the rapid formation of stable cell-particle hybrids without significant changes in islet viability and functionality. Extremely low quantities of FK506 (approximately 600 ng per recipient) sustainably released from cell-particle hybrids effectively prolonged survival of xenogeneic islet graft. Interestingly, FK506 exhibited extended bioavailability in the grafts but was undetectable in systemic circulation and other tissues. Moreover, mRNA expression of inflammatory cytokines was significantly inhibited in the PD-FK506-MS-containing grafts but not in lymphoid organs. This study presents a promising platform that facilitates the translation of local immunomodulation towards an effective strategy with improved safety profiles for treating type I diabetes.

Folate receptor-mediated celastrol and irinotecan combination delivery using liposomes for effective chemotherapy.

Drug targeting using functionalized nanoparticles provides a new standard in anticancer therapy. Liposomes, safe and effective drug delivery carriers, can incorporate both hydrophilic and hydrophobic drugs for combination chemotherapy treatment of cancers. The objectives of the current study were to synthesize and test the effectiveness of a nanotechnology-based strategy utilizing folic acid (FA)-conjugated liposomes that incorporate both celastrol (Cs) and irinotecan (Ir) for targeted breast cancer therapy. Our results revealed the successful preparation of Cs and Ir-loaded folate-targeted liposomes (Lipo/Cs/Ir-FA) with a small particle size (∼190 nm) and polydispersity index (∼0.10). The formulation exhibited higher drug release profiles for both Ir and Cs at pH 5.0 compared to those at physiological pH, favoring cancer cell-targeted release. Furthermore, in vitro cell studies showed high uptake and enhanced apoptosis in folate receptor-positive breast cancer cells (MCF-7 and MDA-MB-231), but not in folate receptor-negative lung cancer cells (A549). Moreover, an in vivo study in a mouse tumor model using MDA-MB-231 xenografts supported effective drug delivery behavior of the folate-conjugated liposomes by selective targeting of tumor tissue and minimizing systemic adverse effects. Therefore, our formulation could provide an effective therapy for targeted cancer treatment.

Tissue adhesive FK506-loaded polymeric nanoparticles for multi-layered nano-shielding of pancreatic islets to enhance xenograft survival in a diabetic mouse model.

This study aims to develop a novel surface modification technology to prolong the survival time of pancreatic islets in a xenogenic transplantation model, using 3,4-dihydroxyphenethylamine (DOPA) conjugated poly(lactide-co-glycolide)-poly(ethylene glycol) (PLGA-PEG) nanoparticles (DOPA-NPs) carrying immunosuppressant FK506 (FK506/DOPA-NPs). The functionalized DOPA-NPs formed a versatile coating layer for antigen camouflage without interfering the viability and functionality of islets. The coating layer effectively preserved the morphology and viability of islets in a co-culture condition with xenogenic lymphocytes for 7 days. Interestingly, the mean survival time of islets coated with FK506/DOPA-NPs was significantly higher as compared with that of islets coated with DOPA-NPs (without FK506) and control. This study demonstrated that the combination of surface camouflage and localized low dose of immunosuppressant could be an effective approach in prolonging the survival of transplanted islets. This newly developed platform might be useful for immobilizing various types of small molecules on therapeutic cells and biomaterial surface to improve the therapeutic efficacy in cell therapy and regenerative medicine.

Targeted co-delivery of polypyrrole and rapamycin by trastuzumab-conjugated liposomes for combined chemo-photothermal therapy.

Trastuzumab is a therapeutic monoclonal antibody that selectively recognizes HER2/neu receptor for targeting breast cancers. In this study, we aimed to present a strategy to combine chemo and phototherapy and targeted delivery via monoclonal antibody for enhanced anticancer effects. We co-loaded a chemotherapeutic agent, rapamycin, and a photosensitizer, polypyrrole, in trastuzumab-conjugated liposomes (LRPmAb) for combined chemo-photothermal therapy. LRPmAb had small size (172.2±9.6nm), narrow distribution, and negative ζ-potential (-12.0±0.3mV). In addition, LRPmAb showed pH- and temperature-dependent release profiles. LRPmAb showed significantly enhanced uptake in BT-474 cells, a natural HER2/neu expressing cell line. We found that these LRPmAb were effective in delivering rapamycin and showed higher therapeutic efficacy in breast cancer cells overexpressing HER2/neu receptors compared with cells that did not overexpress these receptors. Furthermore, LRPmAb showed synergistic activity against rapamycin-sensitive and resistant cell lines in vitro. These findings indicated that LRPmAb-mediated drug delivery could improve the therapeutic efficacy against breast cancer and overcome drug resistance.

Incorporation of chemotherapeutic agent and photosensitizer in a low temperature-sensitive liposome for effective chemo-hyperthermic anticancer activity.

OBJECTIVES: In this study, we combined chemo- and hyperthermia therapy in a low temperature-sensitive liposome (LTSL) for potential cancer treatment. METHODS: Docetaxel (DOC) and indocyanine green (ICG) as a therapeutic agent and photosensitizer, respectively, were incorporated in a low temperature-sensitive liposome (LTSL/DI). Nanoparticles were evaluated for the physicochemical characterizations, in vitro uptake and cytotoxicity, and furthermore in vivo anticancer activity. RESULTS: The particle size of LTSL/DI was 130.8 ± 2.3 nm, and its drug release profile was pH- and temperature-dependent, which are effective for tumor targeting. The in vitro anticancer activity of LTSL/DI was significantly enhanced compared with free DOC in SCC-7 and MCF-7 cell lines. Interestingly, near-infrared laser irradiation after the treatment resulted in better anticancer activity than in the non-irradiated condition. The in vivo tumor regression effect of LTSL/DI in combination with NIR irradiation was much greater compared with the control group in SCC-7 tumor-bearing mice. After intratumoral injection of LTSL/DI, local heat induced by NIR irradiation and the localized docetaxel burst release could completely ablate the tumor, and inhibit its recurrence. CONCLUSIONS: These results suggest LTSL/DI formulation as a potential therapeutic strategy with effectively localized anti-tumor activity and low risk of side effect to non-target organs.

Engineering of multifunctional temperature-sensitive liposomes for synergistic photothermal, photodynamic, and chemotherapeutic effects.

Heterogeneity of cancer cells and drug resistance require multiple therapeutic approaches for comprehensive treatment. In this study, temperature-sensitive liposomes containing anti-cancer agent tanespimycin (17-AAG) and photosensitizer IR 820 were developed for combination of phototherapy and chemotherapy. The temperature-sensitive liposomes composed of DPPC, cholesterol, DSPE-PEG, 17-AAG, and IR 820 (LP-AI) at weight ratio of 35/15/3/2/2 were formulated as a thin film using extrusion and evaluated for particle size, morphology and drug release profile. Furthermore, the anticancer effect of combined therapy was examined in vitro and in vivo in SCC-7 and MCF-7 cell lines. As a result, LP-AI was prepared at particle size of 166.7±1.3nm, PDI of 0.153±0.012, and ζ-potential of -32.6±0.8mV. After NIR irradiation (660 and 808nm laser), LP-AI could generate heat and ROS and enhance drug release from nanoparticles which were useful to kill the cancer cells. These were confirmed by in vitro cytotoxicity as well as in vivo effective ablation of tumors. In conclusion, fast drug release and enhanced treatment efficacy of LP-AI indicate the potential of integrating photo- and chemotherapy for synergistic anti-cancer effects.

Targeted and controlled drug delivery system loading artersunate for effective chemotherapy on CD44 overexpressing cancer cells.

Poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles with negative surface charge were reversed to positive by cationic surfactant-DDAB before being coated with an anionic polymer, hyaluronic acid, to improve their site-specific intracellular delivery against CD44 receptor overexpressing cancer cells. Incorporating artesunate (ART)-a promising anticancer drug into PLGA/HA nanoparticles, is expected not only to overcome its poor aqueous solubility and stability but also enhance the activities. The obtained particles were characterized by dynamic light scattering, zeta potential measurements, and transmission electron microscopy (TEM). Cancer cell internalization of the NPs was evaluated by flow cytometry and cytotoxicity of the NPs was tested by 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide assay. PLGA/HA nanoparticles showed greater extent of cellular uptake to SCC-7 and MCF-7 cells, indicating their affinity with CD44 receptor-mediated endocytosis. Almost 60 % of ART was released into the outer media after 48 h. In vitro fluorescence sorting demonstrated that PLGA/HA had highly efficient targeting and accumulation into CD44 receptor overexpression cells. The significant reduction in cell viability as well as greater induction of apoptosis suggested a potential in anticancer therapy of ART loaded PLGA/HA.

Enhancing the in vitro anti-cancer efficacy of artesunate by loading into poly-D,L-lactide-co-glycolide (PLGA) nanoparticles.

Artesunate (ART)-a well-known anti-malarial agent is also known to have potential anti-proliferative activities but its instability, poor aqueous solubility, and lack of relevant studies have limited its application as an effective anti-cancer drug. To overcome these problems, ART was loaded in poly (lactic-co-glycolic) acid (PLGA) nanoparticles using oil/water emulsion evaporation method. PLGA nanoparticles with small particle size and high entrapment efficiency were obtained. The PLGA nanoparticles were optimized by evaluating the effects of several formulation parameters on physicochemical properties of nanoparticles. The in vitro cytotoxicity of blank PLGA, free ART, and ART-PLGA on 3 human cancer cell lines viz. A549, SCC-7, and MCF-7 was conducted using MTT assay. The particles showed nanometric size (~170 nm), large entrapment efficiency (up to 83.4%), and excellent stability (evaluated for 1 month) after lyophilization with 5% mannitol. ART was dispersed inside particle core allowing a sustained release up to 48 h. The in vitro cytotoxicity results demonstrated strong activity of ART against cancer cell lines. The ART-PLGA formulation significantly reduced cell viability than the free ART. The formulation of ART loaded PLGA nanoparticles supported a potential application of ART as an anticancer agent.

Tumor-targeting, pH-sensitive nanoparticles for docetaxel delivery to drug-resistant cancer cells.

The attachment of polyethylene glycol (PEG) increases the circulation time of drug-containing nanoparticles; however, this also negatively affects cellular uptake. To overcome this problem, unique lipid polymer hybrid (LPH) nanoparticles were developed with a pH-responsive PEG layer that detached prior to cell uptake. Docetaxel (DTX) was incorporated into the lipid core of the nanoparticles, which was then shielded with the pH-responsive block co-polymer polyethylene glycol-b-polyaspartic acid (PEG-b-PAsp) using a modified emulsion method. The optimized LPH nanoparticles were ~200 nm and had a narrow size distribution. Drug release from DTX-loaded LPH (DTX-LPH) nanoparticles was pH-sensitive, which is beneficial for tumor targeting. More importantly, DTX-LPH nanoparticles were able to effectively induce apoptosis in cancer cells. The negative surface charge and PEG shell of vehicle remarkably enhanced the blood circulation and physiological activity of DTX-LPH nanoparticles compared with that of free DTX. The nanoparticles were also found to reduce the size of tumors in tumor-bearing xenograft mice. The in vivo anticancer effect of DTX-LPH nanoparticles was further confirmed by the elevated levels of caspase-3 and poly ADP ribose polymerase found in the tumors after treatment. Thus, the results suggest that this novel LPH system could be an effective new treatment for cancer.