Tooth ultrastructure changes induced by a nonsense mutation in the FAM83H gene: insights into the diversity of amelogenesis imperfecta.

OBJECTIVES: The current research on single-nucleotide polymorphism (SNP) mutation sites at different positions of the FAM83H gene and their phenotypic changes leading to amelogenesis imperfecta (AI) is inconsistent. We identified a previously reported heterozygous nonsense mutation c.1192C>T (p.Q398*) in the FAM83H gene and conducted a comprehensive analysis of the dental ultrastructure and chemical composition changes induced by this mutation. Additionally, we predicted the protein feature affected by this mutation site. The aim was to further deepen our understanding of the diversity of AI caused by different mutation sites in the FAM83H gene. METHODS: Whole-exome sequencing (WES) and Sanger sequencing were used to confirm the mutation sites. Physical features of the patient's teeth were investigated using various methods including cone beam computer tomography (CBCT), scanning electron microscopy (SEM), contact profilometry (roughness measurement), and a nanomechanical tester (nanoindentation measurement). The protein features of wild-type and mutant FAM83H were predicted using bioinformatics methods. RESULTS: One previously discovered FAM83H heterozygous nonsense mutation c.1192C>T (p.Q398*) was detected in the patient. SEM revealed inconsistent dentinal tubules, and EDS showed that calcium and phosphorus were lower in the patient's dentin but higher in the enamel compared to the control tooth. Roughness measurements showed that AI patients' teeth had rougher occlusal surfaces than those of the control tooth. Nanoindentation measurements showed that the enamel and dentin hardness values of the AI patients' teeth were both significantly reduced compared to those of the control tooth. Compared to the wild-type FAM83H protein, the mutant FAM83H protein shows alterations in stability, hydrophobicity, secondary structure, and tertiary structure. These changes could underlie functional differences and AI phenotype variations caused by this mutation site. CONCLUSIONS: This study expands the understanding of the effects of FAM83H mutations on tooth structure. CLINICAL RELEVANCE: Our study enhances our understanding of the genetic basis of AI and may contribute to improved diagnostics and personalized treatment strategies for patients with FAM83H-related AI.

Factorial structure and measurement invariance of the Chinese version of the Oral Health Impact Profile-14 among clinical populations and non-clinical populations: an evidence for public oral investigations.

OBJECTIVE: Oral health-related quality of life (OHRQoL) is a multidimensional concept that is commonly used to examine the impact of oral health status on quality of life. The purpose of this study was to examine the optimal factor model of the Chinese version of the Oral Health Impact Profile (OHIP-14) questionnaire in clinical populations, measurement invariance across clinical status and gender cohorts. This would ensure equal validity of the Chinese version of OHIP-14 in different populations and further support public oral investigations. METHODS: The Chinese version of OHIP-14 was used to investigate 490 dental patients and 919 college students. Confirmatory factor analysis (CFA), item analysis and reliability, measurement invariance, and the t-test were used for data analyses. RESULTS: We found that the 7-factor structure had the best-fit index in the sample (CFI = 0.970, TLI = 0.952; SRMR = 0.029, RMSEA = 0.052(0.040,0.063)). The reliability of the scales was satisfactory (Cronbach's α = 0.942). The error variance invariance fitted the data adequately in measurement invariance, indicating that measurement invariance is acceptable both across the clinical and non-clinical populations (∆CFI=-0.017, ∆RMSEA = 0.010) and across genders in the clinical population (∆CFI = 0.000, ∆RMSEA=-0.003). T-test for scores showed that the clinical populations scored significantly higher than the non-clinical populations, as did the overall score (t = 7.046, p < 0.001, d = 0.396), in terms of functional limitation (t = 2.178, p = 0.030, d = 0.125), physical pain (t = 7.880, p < 0.001,d = 0.436), psychological discomfort (t = 8.993, p < 0.001, d = 0.514), physical disability (t = 6.343, p < 0.001, d = 0.358), psychological disability (t = 5.592, p < 0.001, d = 0.315), social disability (t = 5.301, p < 0.001,d = 0.304), social handicap (t = 4.452, p < 0.001, d = 0.253), and that in the non-clinical populations, females scored significantly higher than males, as did in terms of physical pain (t = 3.055, p = 0.002, d = 0.280), psychological discomfort (t = 2.478, p = 0.014, d = 0.222), and psychological disability (t = 2.067, p = 0.039, d = 0.188). CONCLUSION: This study found that the Chinese version of OHIP-14 has measurement invariance between the clinical and non-clinical populations and across genders in the clinical populations, and can be widely used in OHRQoL assessment for public oral investigations.

Nano-Crystalline Sandwich Formed in Polylactic Acid Fibers.

Fibers have traditionally been made through melt or solution processes from macromolecules. Most of these fibers have crystalline domains where the segregation of different crystalline features is extremely difficult due to the statistical nature of the formation and growth of these domains. A fibrous nano-crystalline sandwich is reported where distinctly different crystalline regions are formed in layers along the continuous fiber direction during the spinning process and locked in place. This approach employs side-by-side bicomponent nanofiber electrospinning where the components are the enantiomeric pair of poly(l-lactic acid) and poly(d-lactic acid). The formation of the poly(lactic acid) (PLA) stereo-complexes at the junction interphase of the two components is demonstrated through diffusion, which subsequently crystallize into continuous sandwich domains. The stereo-complex crystalline core in the fiber possesses a melting point 50 °C higher than, and properties substantially different from, the regular PLAs at the fringe areas of the fiber. This nano-crystalline sandwich fiber structure can be scaled to the micrometers in a commercial bicomponent process.

Natural polymer-based bioadhesives as hemostatic platforms for wound healing.

Medical adhesives are advanced but challenging alternatives to wound closure and repair, especially in mitigating uncontrolled hemorrhage. Ideal hemostatic adhesives need to meet good biocompatibility and biodegradability, adequate mechanical strength, and strong tissue adhesion functionality under wet and dynamic conditions. Considering these requirements, natural polymers such as polysaccharide, protein and DNA, attract great attention as candidates for making bioadhesives because of their distinctive physicochemical performances and biological properties. This review systematically summarizes the advances of bioadhesives based on natural polysaccharide, protein and DNA. Various physical and chemical cross-linking strategies have been introduced for adhesive synthesis and their hemostatic applications are introduced from the aspect of versatility. Furthermore, the possible challenges and future opportunities of bioadhesives are discussed, providing insights into the development of high-performance hemostatic materials.

Evaluation of the Efficacy of Stem Cells Therapy in the Periodontal Regeneration: A Meta-Analysis and Mendelian Randomization Study.

Stem cell therapy for periodontal defects has shown good promise in preclinical studies. The purpose of this study was to evaluate the impact of stem cell support on the regeneration of both soft and hard tissues in periodontal treatment. PubMed, Cochrane Library, Embase, and Web of Science were searched and patients with periodontal defects who received stem cell therapy were included in this study. The quality of the included articles was assessed using Cochrane's tool for evaluating bias, and heterogeneity was analyzed using the I2 method. An Mendelian randomization investigation was conducted using abstract data from the IEU public databases obtained through GWAS. Nine articles were included for the meta-analysis. Stem cell therapy effectively rebuilds periodontal tissues in patients with periodontal defects, as evidenced by a reduction in probing depth, clinical attachment level  and bone defect depth . And delta-like homolog 1 is a protective factor against periodontal defects alternative indicator of tooth loosening. The findings of this research endorse the utilization of stem cell treatment for repairing periodontal defects in individuals suffering from periodontitis. It is recommended that additional extensive clinical investigations be carried out to validate the efficacy of stem cell therapy and encourage its widespread adoption.

Enhanced stereocomplex crystalline polylactic acids in melt processed enantiomeric bicomponent fiber configurations.

The formation of stereocomplex crystalline domains in the bicomponent fiber melt spinning of enantiomeric polylactic acids (PLAs) is systematically explored and enhanced. Here we report a polycrystalline morphology where distinctly different crystalline regions are formed and aligned along the longitudinal direction of the fiber. This approach employs side-by-side and sheath-core bicomponent melt spinning configurations where the two components are the enantiomeric pairs of poly(L-lactic acid) (PLLA) and poly(D-lactic acid) (PDLA). We demonstrate the formation of the PLA stereocomplexes at the junction interphase through the melt spinning process which subsequently crystallize into a round fibers with stereocomplex and homogeneous crystal lamella morphologies. The fiber morphologies and crystallinities of the melt processed fiber are substantially different from the solution based bicomponent spinning system reported in the prior literature. Furthermore, the different molecular weight in the PLLA/PDLA pairing are found to be crucial to the structural development and properties of the PLA polycrystalline materials. The solid-state annealing does not change the crystal distribution of the crystalline domains and stereocomplex crystalline state, it just enhances the homo-crystallinity in the peripheral of the bicomponent fibers.

Type 1 diabetes, glycemic traits, and risk of dental caries: a Mendelian randomization study.

Background: Regarding past epidemiological studies, there has been disagreement over whether type 1 diabetes (T1DM) is one of the risk factors for dental caries. The purpose of this study was to determine the causative links between genetic susceptibility to T1DM, glycemic traits, and the risk of dental caries using Mendelian randomization (MR) approaches. Methods: Summary-level data were collected on genome-wide association studies (GWAS) of T1DM, fasting glucose (FG), glycated hemoglobin (HbA1c), fasting insulin (FI), and dental caries. MR was performed using the inverse-variance weighting (IVW) method, and sensitivity analyses were conducted using the MR-Egger method, weighted median, weighted mode, replication cohort, and multivariable MR conditioning on potential mediators. Results: The risk of dental caries increased as a result of genetic susceptibility to T1DM [odds ratio (OR) = 1.044; 95% confidence interval (CI) = 1.015-1.074; p = 0.003], with consistent findings in the replication cohort. The relationship between T1DM and dental caries was stable when adjusted for BMI, smoking, alcohol intake, and type 2 diabetes (T2DM) in multivariable MR. However, no significant correlations between the risk of dental caries and FG, HbA1c, or FI were found. Conclusion: These results indicate that T1DM has causal involvement in the genesis of dental caries. Therefore, periodic reinforcement of oral hygiene instructions must be added to the management and early multidisciplinary intervention of T1DM patients, especially among adolescents and teenagers, who are more susceptible to T1DM.

Tailoring moisture electroactive Ag/Zn@cotton coupled with electrospun PVDF/PS nanofibers for antimicrobial face masks.

Face mask has become an essential and effective apparatus to protect human beings from air pollution, especially the air-borne pathogens. However, most commercial face masks can hardly achieve good particulate matters (PMs) and high bactericidal efficacy concurrently. Herein, a bilayer structured composite filter medium with built-in antimicrobial activities was constructed by combining cotton woven modified by magnetron sputtered Ag/Zn coatings and electrospun poly(vinylidene fluoride)/polystyrene (PVDF/PS) nanofibers. With the benefit of external moisture, an electrical stimulation was generated inside the composite fabric and thus endowed the fabric antimicrobial function. The resultant composite fabric presented conspicuous performance for integrated air pollution control, high filtration performance towards PM0.3 (99.1%, 79.2 Pa) and exceptional interception ratio against Escherichia coli (99.64%) and Staphylococcus aureus (98.75%) within 20 min contact. The high efficiency contact sterilization function of the bilayer fabric could further potentially promote disinfection and reuse of the filter media. This work may provide a new perspective on designing high-performance face mask media for public health protection.

Late hematoma, seroma, and galactocele in breasts injected with polyacrylamide gel.

Late hematoma or seroma and galactocele caused by augmentation mammaplasty have been reported in patients with silicon breast prostheses but are extremely rare in patients injected with polyacrylamide gel (PAAG). In a retrospective survey, the incidence, clinical manifestations, and management of late hematoma, seroma, and galactocele in 28 of 2,610 patients who underwent breast augmentation with PAAG injection were investigated, and 5 typical cases are presented. The diagnostic and managing methods for this complication have been assessed. The incidence of late hematoma or seroma was 0.65% and that of galactocele was 0.35% among patients with PAAG-injected breast augmentations. The clinical onsets of such late PAAG complications were of two types: rapid enlargement in 17 patients and progressive expansion in another 11 patients. Aspiration, ultrasound, and magnetic resonance imaging (MRI) are useful and sensitive tools for diagnosis. Foreign body reaction, PAAG-related tissue necrosis and fibrosis, and granuloma were shown, and the bacterial cultures in all 12 cases were negative. Needle aspiration with pressure dressing has been advocated as a reliable method for small diseases, and surgical exploration with irrigation-vacuum drainage and evacuation with capsulectomy have been considered more effective for recurrent, large, and long-term cases. In conclusion, these late complications rarely present after large-volume injections of PAAG for breast augmentation. The PAAG-related pathologic inflammatory tissue changes are suggested as the pathogenesis for the complication. Trauma and breastfeeding are considered to be stimulating factors.

Performance of polyvinyl pyrrolidone-isatis root antibacterial wound dressings produced in situ by handheld electrospinner.

Antibacterial dressings are an increasingly important tool for the prevention and management of wound infections, particularly in light of concerns surrounding conventional drug-resistant antibiotics. Handheld electrospinning devices provide opportunities for the rapid application of antibacterial dressing materials to wounds, but spinning formulations need to be compatible with live biological surfaces. We report the development of a new antibacterial formulation compatible with handheld electrospinning, and its manufacture directly on a wound site. Nanofibrous dressing mats were produced from polyvinyl pyrrolidone (PVP) containing isatis root (Indigowoad root or Ban-Lan-Gen), a traditional Chinese medicine, commonly used for the treatment of infectious disease. The resulting wound dressing mats of PVP/isatis root exhibited well-defined fibrous structures and excellent surface wetting, and permeability characteristics. The presence of isatis root conferred antibacterial activity against gram negative and gram positive strains. Moreover, in a Kunming mouse skin injury model, direct electrospinning of PVP/isatis root formulations on to wound sites produced near complete wound closure after 11 days and epidermal repair in histological studies.

Breast cancer following augmentation mammaplasty with polyacrylamide hydrogel (PAAG) injection.

Polyacrylamide hydrogel (PAAG) as an implanted material for augmentation mammaplasty has been used for years in China. Many kinds of complications associated with PAAG use have been reported in the clinical literature. This report presents two cases of breast cancer occurring after injection of PAAG in augmented breasts. The delayed diagnosis and more aggressive disease due to PAAG injection should be cause for concern. It is very important to detect breast cancer early when it is covered by the induration of the injected gel and inflammation reaction after PAAG injection. PAAG injection for augmentation mammaplasty may affect the outcome of breast cancer diagnosis and prognosis.

Betamethasone suppresses the inflammatory response in LPS-stimulated dental pulp cells through inhibition of NF-κB.

OBJECTIVE: This study aimed to investigate the anti-inflammatory effect of betamethasone on LPS-stimulated human dental pulp stem cells (DPSCs) and its associated mechanism. The osteo-/odontogenic differentiation and osteoclast effect of betamethasone on DPSCs and stem cells from human exfoliated deciduous teeth (SHED) were evaluated. DESIGN: The proliferative effect of betamethasone on DPSCs was analyzed using a cholecystokinin octapeptide assay. The anti-inflammatory effect of betamethasone was investigated using quantitative polymerase chain reaction (qPCR) and ELISA. The anti-inflammatory mechanism was explored using qPCR, Western blot, and immunofluorescence staining. The osteo-/odontogenic differentiation and osteoclast effect of betamethasone on DPSCs and SHED were detected by qPCR. RESULTS: 1 µg L-1 betamethasone was found to have the strongest effect on DPSCs proliferation. The expression of pro-inflammatory cytokines and mediators, as well as prostaglandin E2 (PGE2) were significantly decreased following treatment with betamethasone in LPS- stimulated DPSCs. They were also decreased in response to an NF-κB inhibitor, Bay 11-7082. Betamethasone and Bay 11-7082 significantly inhibited the expression of p-p65 and promoted the nuclear exclusion of p65. Gene expression associated with osteo-/odontogenic differentiation was significantly up-regulated in betamethasone and osteogenic media (OM) treated groups. The ratio of the receptor activator of nuclear factor kappa B ligand (RANKL) and osteoprotegerin (OPG) at the mRNA level was suppressed in DPSCs and elevated in SHED. CONCLUSIONS: Betamethasone has an anti-inflammatory effect on LPS- stimulated DPSCs through a blockade of NF-κB activation and exhibits an osteo-/odonto-inductive effect on DPSCs and SHED. Although betamethasone displays an osteoclast effect on SHED.

Mineralisation Influence of Betamethasone on Lipopolysaccharide-Stimulated Dental Pulp Cells.

OBJECTIVE: To evaluate the mineralisation response of lipopolysaccharide (LPS)-induced dental pulp cells (DPCs) to betamethasone and the potential benefit of betamethasone application on the recovery of injured dental pulp. METHODS: The proliferation influence of betamethasone on DPCs was analysed through the cell counting kit-8 assay. To assess the anti-inflammatory effects of betamethasone, the expression levels of inflammatory factors IL-6, IL-1ß and TNF-∂ were determined by real-time polymerase chain reaction (PCR). Mineralisation was investigated through the detection of the mineralisation-related biomarkers alkaline phosphatase (ALP), dentine sialophosphoprotein (DSPP) and osteocalcin (OCN) through the ALP activity assay, immunohistochemistry staining, Alizarin Red and tissue nonspecific alkaline phosphatase (TNAP) staining, the reverse transcriptase PCR technique and western blot. RESULTS: A low concentration of betamethasone (1 µ/mL) promoted the proliferation of DPCs. The real-time PCR results demonstrated that inflammatory cytokines were downregulated by betamethasone treatment. The mineralisation outcome in DPCs treated with betamethasone was better than in those treated without betamethasone. CONCLUSION: Betamethasone promoted the proliferation of DPCs. Betamethasone enhanced mineralisation in LPS-stimulated DPCs.

Wireless, battery-free optoelectronic systems as subdermal implants for local tissue oximetry.

Monitoring regional tissue oxygenation in animal models and potentially in human subjects can yield insights into the underlying mechanisms of local O2-mediated physiological processes and provide diagnostic and therapeutic guidance for relevant disease states. Existing technologies for tissue oxygenation assessments involve some combination of disadvantages in requirements for physical tethers, anesthetics, and special apparatus, often with confounding effects on the natural behaviors of test subjects. This work introduces an entirely wireless and fully implantable platform incorporating (i) microscale optoelectronics for continuous sensing of local hemoglobin dynamics and (ii) advanced designs in continuous, wireless power delivery and data output for tether-free operation. These features support in vivo, highly localized tissue oximetry at sites of interest, including deep brain regions of mice, on untethered, awake animal models. The results create many opportunities for studying various O2-mediated processes in naturally behaving subjects, with implications in biomedical research and clinical practice.

A Genetically Encoded Protein Polymer for Uranyl Binding and Extraction Based on the SpyTag-SpyCatcher Chemistry.

A defining goal of synthetic biology is to develop biomaterials with superior performance and versatility. Here we introduce a purely genetically encoded and self-assembling biopolymer based on the SpyTag-SpyCatcher chemistry. We show the application of this polymer for highly efficient uranyl binding and extraction from aqueous solutions, by embedding two functional modules-the superuranyl binding protein and the monomeric streptavidin-to the polymer via genetic fusion. We further provide a modeling strategy for predicting the polymer's physical properties, and experimentally demonstrate the autosecretion of component monomers from bacterial cells. The potential of multifunctionalization, in conjunction with the genetic design and production pipeline, underscores the advantage of the SpyTag-SpyCatcher biopolymers for applications beyond trace metal enrichment and environmental remediation.

Our strategy in complication management of augmentation mammaplasty with polyacrylamide hydrogel injection in 235 patients.

Polyacrylamide hydrogel (PAAG) was once widely used in breast augmentation in China. Although it had been banned for augmentation mammaplasty in 2006, a large number of patients whose breasts were augmented with the gel injection have continued to seek medical advice because of its complications. The clinical management of these complications has never been standardised. The data of a total of 235 patients with complications following PAAG-injected breast augmentation have been summarised and the types and causations analysed. Magnetic resonance imaging (MRI) was undertaken in 228 patients with palpable masses, breast pain or tenderness, asymmetry or deformity and functional or psychological problems to eliminate neoplasm, infection and to delineate the diseases. The surgical gel evacuation via periareolar incisions was performed for all patients and immediate silicone breast prostheses were implanted in 108 patients and were delayed in 28 cases by 6 months. Most patients (214/235) of the group were satisfied with the treatment, and symptoms disappeared after removal of the gel. The gel distribution and involved tissue were well defined and neoplasm was ruled out by MRI. Postoperative MRI in 68 patients revealed that no obvious PAAG remaining. In either immediate or delayed reconstructive patients with silicone breast implants, good breast contour presented. A diagnosis and management strategy for these complications is proposed. In conclusion, the breast masses, pain and deformity are major complications after PAAG-injected breast augmentation. Psychological problems should be paid attention to. MRI is a sensitive and accurate method for diagnosis and treatment evaluation. Surgical removal of injected gel is the preferred method for complication management. The implantation of silicone prostheses for breast contour restoration after PAAG evacuation is effective for patients under strict selection. Our strategy for treating PAAG-related complications proved useful.

Polyacrylonitrile fibers efficiently loaded with tamoxifen citrate using wet-spinning from co-dissolving solution.

Tamoxifen citrate (TAM)-loaded polyacrylonitrile (PAN) fibers were prepared using an improved wet-spinning technique. TAM was used as a model drug to evaluate the potential application of the loaded fiber system for drug delivery. PAN was first homogeneously dissolved in the N,N-dimethylacetamide (DMAc) solution containing TAM and then the co-dissolving solution was solidified to prepare the fibers using a wet-spinning method. Chemical, morphological and mechanical property characterizations were carried out, as well as the studies of the drug release properties. TAM was successfully encapsulated into a monofilament fiber, and this system was stable in terms of high loading capacity and effectiveness in release. The diameter of drug-loaded fiber was in the range of 40-60 microm. The best values of the tensile strength at 2.968 cN/dtex and breaking elongation at 14.9% of drug-loaded fibers were obtained when the drug loading content was 23.1 wt.%. These characteristics were suitable for the weaving process. The in vitro release experiment indicated that constant drug release from the fiber was observed for a long duration of time. Kinetic studies demonstrated that the system followed the Higuchi kinetics. These findings demonstrate that controlled release of drugs from PAN fibers could be potentially useful in drug delivery systems.

Migration of implants: a problem with injectable polyacrylamide gel in aesthetic plastic surgery.

Polyacrylamide gel (PAAG) has been used as a soft tissue filler material for cosmetic purposes in Europe and China since 1997. The various complications of PAAG have been reported. A total of 15 patients who received PAAG injections at other institutions were treated for gel migration in the authors' hospitals. During treatment, the authors found that the injected PAAG had not formed capsules within the muscle and was encapsulated only by thin fibrous tissue in skin and mammary glands. Consequently, the filler material migrated easily because of muscular activity or the influence of gravity, especially when the capsule was broken by incorrect massage or incidental force. It is suggested that PAAG should not be injected into muscular tissue or subcutaneous areas with active movement, such as joints and muscles involved in facial expression with thin skin. After years of gel implantation, the thinned capsule may result in an increasing incidence of this complication. Management and some clinical findings in relation to the complication also are discussed.

[A comparison of the velopharyngeal closure after palatoplasty between with or without velopharyngeal muscular reconstruction].

OBJECTIVE: To evaluate the effect of palatoplasty with or without velopharyngeal muscular reconstruction on the velopharyngeal closure under the lateral radiography. METHODS: The lateral radiographs and cephalometric analysis were taken in sixty-two patients with cleft palate and velopharyngeal insufficiency, 32 repaired with velopharyngeal muscular reconstruction and 30 with modified von Langenbeck's procedure (non-reconstructive group). RESULTS: In patients with velopharyngeal muscular reconstruction, the velopharyngeal competence, the reductive rate of nasopharynx, the distance reduction in lower part of the mobile nasopharynx during phonation and the distance in middle part of mobile nasopharyngo in rest were superior to that without velopharyngeal muscular reconstruction, and there were variform PPW eminence-soft palate contact in velopharyngeal closure. The patients with complete or good velopharyngeal closure had a definite reduction in nasopharynx, compared to the patients with velopharyngeal insufficiency in the non-reconstructive group. CONCLUSIONS: The functional area for velopharyngeal closure after palatoplasty might be located in the middle part of mobile nasopharynx. The velopharyngeal muscular reconstruction in palatoplasty could reduce the size of nasopharynx and improve the coordination movement of velopharyngeal closure.