Microsurgical mandibular reconstruction using a resin surgical guide combined with a metal reconstructive plate.

INTRODUCTION: In mandibular reconstruction, repositioning the mandibular position is still challenging and time consuming. We invented a new re-positioning technique using a resin plate combined with a reconstructive plate in reconstructing the mandible with an osteocutaneous free flap. The purpose of this report is to introduce this technique and evaluate the accuracy of mandibular reconstruction using free flaps. We hypothesized that this technique is precise and can reduce intraoperative plate bending at a low cost and short preparation period. METHODS: Mandibular reconstruction was successfully performed in a total of 10 cases without any complications. In this technique, a pre-bent reconstructive plate was prepared in accordance with a three-dimensional model, and then coated with resin. Intraoperatively, the mandibles were secured by fitting these plates snugly and fixing them using a reconstructive plate. Then the resin was removed and free osteocutaneous free flaps were transfer to the defect. Ten patients with a mean age of 68.2 who underwent mandibular resection for aggressive benign (n = 1) or malignant disease (n = 9) were reconstructed using this technique. Seven cases were reconstructed using fibular osteocutaneous free flaps, while scapular osteocutaneous free flaps were used in the remaining cases. The resections entailed: unilateral symphysis and lateral body in four cases, angle to ipsilateral angle in two, ramus to symphysis in two, and lateral body plus angle to symphysis in one case. The deviation of the mandible was evaluated by measuring the preoperative versus postoperative differences in the distances between six bilateral landmarks. RESULTS: There were no complications and flap failure in any of the 10 cases. No further intraoperative plate bending was required. One case underwent additional mucosal resection due to recurrence of cancer. Three cases were referred to postoperative chemoradiotherapy. Two patients expired during follow-up due to recurrence of cancer. Six cases were put back on a normal diet. The other cases who lacked opposing teeth had to remain on a soft diet. The mean follow-up period was 46.2 months. The average of the absolute deviation values was 1.45 mm. This value was 0.94 mm in six cases with mandibular body defects and 2.26 mm in four cases with mandibular defects involving the ramus. CONCLUSIONS: The present novel technique is simple, quick to prepare, and accurate. This technique can be a viable option for microsurgical mandibular reconstruction.

Reconstruction of the dynamic velopharyngeal function by combined radial forearm-palmaris longus tenocutaneous free flap, and superiorly based pharyngeal flap in postoncologic total palatal defect.

We attempted to reconstruct dynamic palatal function using a radial forearm-palmaris longus tenocutaneous free flap in conjunction with a pharyngeal flap for a postoncologic total-palate defect in a 67-year-old male patient. This reconstruction involved 3 important tasks, namely, separating the oral and nasal cavities, preserving the velopharyngeal space to avoid sleep apnea, and maintaining velopharyngeal closure to avoid nasal regurgitation during swallowing. In our technique, the radial forearm flap separates the oral and nasal cavities with an open rhinopharyngeal space, and a superiorly based pharyngeal flap, which is sutured to the posterior end of the forearm flap, limits the rhinopharyngeal space, and forms the bilateral velopharyngeal port. Furthermore, the palmaris longus tendon, which is attached to the forearm flap, is secured to the superior constrictor muscle to create a horizontal muscle sling. Contraction of the superior constrictor muscle leads to shrinkage of the sling, resulting in velopharyngeal closure. Swallowing therapy was started 4 weeks after the surgery. The patient could resume oral intake without any difficulties 6 months after the surgery. Speech intelligibility changed from severe to minimal hypernasality.

Clinical Applications of Meshed Multilayered Anatomical Models by Low-Cost Three-Dimensional Printer.

SUMMARY: In recent years, even low-cost fused deposition modeling-type three-dimensional printers can be used to create a three-dimensional model with few errors. The authors devised a method to create a three-dimensional multilayered anatomical model at a lower cost and more easily than with established methods, by using a meshlike structure as the surface layer. Fused deposition modeling-type three-dimensional printers were used, with opaque polylactide filament for material. Using the three-dimensional data-editing software Blender (Blender Foundation, www.blender.org) and Instant Meshes (Jakob et al., https://igl.ethz.ch/projects/instant-meshes/) together, the body surface data were converted into a meshlike structure while retaining its overall shape. The meshed data were printed together with other data (nonmeshed) or printed separately. In each case, the multilayer model in which the layer of the body surface was meshed could be output without any trouble. It was possible to grasp the positional relationship between the body surface and the deep target, and it was clinically useful. The total work time for preparation and processing of three-dimensional data ranged from 1 hour to several hours, depending on the case, but the work time required for converting into a meshlike shape was about 10 minutes in all cases. The filament cost was $2 to $8. In conclusion, the authors devised a method to create a three-dimensional multilayered anatomical model to easily visualize positional relationships within the structure by converting the surface layer into a meshlike structure. This method is easy to adopt, regardless of the available facilities and economic environment, and has broad applications.

EEC-LM-ADULT syndrome caused by R319H mutation in TP63 with ectrodactyly, syndactyly, and teeth anomaly: A case report.

RATIONALE: Ectrodactyly ectodermal dysplasia-cleft lip/palate (EEC) syndrome, limb-mammary syndrome (LMS), and acro-dermato-ungual-lacrimal-tooth (ADULT) syndrome are caused by a TP63 gene disorder and have similar features. In the present article, a R319H mutation in TP63 is reported, and the correlation between genotype and phenotype is discussed based on the current case and previous literature. PATIENT CONCERNS: A 13-year-old Japanese boy had ectrodactyly in the right hand and left foot and syndactyly in the left and right foot, and tooth shape abnormalities. DIAGNOSES: Peripheral blood samples were obtained, and mutation analysis was performed. A heterozygous G>A transition at cDNA position 956 of the TP63 gene was found. The patient was diagnosed with ELA (EEC/LM/ADULT) syndrome based on his clinical features and mutation analysis results. INTERVENTIONS: The patient underwent surgery to correct the left foot malformation at 1 year of age and the right foot syndactyly at 11 years of age. OUTCOMES: No complications were observed after the first and second operations. He can walk comfortably after them, and no additional interventions will be planned in him. We continued to follow up with him up to the present. LESSONS: The concept of ELA syndrome, which is the original concept of combining 3 syndromes (EEC syndrome/LMS/ADULT syndrome) into a unique clinical entity, can help clinicians to better understand TP63-related syndromes and improve the differential diagnosis of these syndromes.

17-year Follow-up after Mandibular Distraction Performed in an Infant with Robin Sequence.

Robin sequence is a congenital anomaly, first described by Pierre Robin as a triad of micrognathia, upper airway obstruction and glossoptosis. The most significant airway management technique is the use of distraction osteogenesis to advance the mandible. On the other hand, late complications such as permanent dentition loss and malformation of the damaged teeth have been reported. Therefore, long-term follow-up after mandibular distraction is important. In our case report, we describe 17 years of follow-up after mandibular distraction performed in a 4-month-old male infant with Robin sequence. The patient was a male with a cleft palate. The tracheotomy and tongue-lip adhesion was performed 1 month after birth, because the percutaneous oxygen saturation decreased to 70% during feeding and crying. However, postoperative X-ray examination revealed that he could not obtain sufficient airway after the operation. For the purpose of closing the tracheotomy early, we performed bilateral mandibular distraction at the age of 4 months. The bilateral corticotomy was performed on the mandibular body and an internal traction device was placed. The mandible was bilaterally lengthened by 17.5 mm, and expansion of the airway was confirmed by X-ray. A cleft palate operation was performed at the age of 17 months. At the age of 3 years, the tracheostomy orifice closed and speech/language training and orthodontics were begun. Dental panoramic radiographs showed favorable mandibular growth. No additional operation has been performed. Finally, his orthodontic treatment was completed without any complications at age 17.