Collaboration Patterns and Processes Between Dentists and Dental Laboratories When Planning and Fabricating Implant-Supported Restorations.

INTRODUCTION: The success of implant-supported restorations is dependent on proper treatment planning, effective communication within the clinical team, and the use of appropriate methods and materials in the dental laboratory. The objective of this study was to determine collaboration trends between dentists and laboratories and to assess the common methods and materials involved in fabricating implant-supported restorations. METHODS: Questionnaires were distributed to dental laboratories and technicians. Seventy questionnaires were answered and were included in the data analyses. RESULTS: Most of the impressions (87%) were taken using an individual custom-made open tray. In 83% of impressions, screw-retained transfer units were used, and in 61% of cases, the units were splinted. Bite registration was recorded in 91% of the cases. In 80% of cases, articulator setup was done. When matching the shade of a restoration in the anterior, 57% of the technicians do so in collaboration with the dentist, and 39% match the shade independently. Type of restoration and abutment selection were done mainly by the technicians. Abutment selection was reported to be carried out by 72% of the technicians. CONCLUSIONS: Generally, dentists and technicians follow the standards recommended in the contemporary literature, especially, in major procedures such as impression taking, bite registration, and articulator setup. However, principal decisions, such as abutment and color shade are done mainly by technicians.

One-year survival rate outcomes of innovative dental implants: a prospective clinical study.

PURPOSE: The aim of this research was to evaluate an innovative implant design for different placement and loading protocols. The unique implant is a combination of tapered and cylindrical shape, which is aimed to enhance initial stability and long-term osseointegration. MATERIALS AND METHODS: Four hundred and sixty implants were placed in 141 patients under different placement and loading protocols in similarity to those encountered in a dental office. Implants were followed and evaluated for 1 year to assert the survival rate of the newly introduced implant. RESULTS: The results showed a total of 97.4% survival rate, ranging from 92% to 98.6% depending on the different protocols. There was no statistical difference between the different protocol groups. CONCLUSION: The new implant design showed good results for 1 year of follow-up, comparable with the literature, and could be a good choice for every implant-based procedure.

Retrospective clinical evaluation of tapered implants: 10-year follow-up of delayed and immediate placement of maxillary implants.

OBJECTIVES: To retrospectively evaluate the clinical outcome of tapered, multithreaded implants (Tapered Screw-Vent MTX; Zimmer Dental, Inc, Carlsbad, CA) with an emphasis on periimplant crestal bone status around those placed delayed and immediately in the posterior and anterior maxilla. METHODS: Chart reviews were performed on 46 patients who had been treated with 173 implants replacing one or more missing and/or unsalvageable teeth in the maxilla. Implant placement and loading was either immediate or delayed. Marginal bone changes were calculated using standardized radiographs taken at implant placement and during annual follow-up. RESULTS: After a mean follow-up of 119 to 121 months, implant survival rate was 99%, and implant success rate was 97%. No discernable bone loss was evident in 85.5% of the surviving implants. Crestal bone loss was observed in 14.5% of all surviving implants: 38.5% of implants immediately loaded and 29.9% of implants with delayed loading. Twenty-one implants exhibited 1 mm of bone loss, 3 implants lost 2 mm, and 1 implant lost 3 mm. Low-density maxillary jawbone and more extensive bone remodeling required around implants immediately placed into extraction sockets were the probable causes of observed bone loss in this study. CONCLUSIONS: Implants exhibited excellent long-term outcomes with little or no bone loss.

Use of cone beam computed tomography in implant dentistry: the International Congress of Oral Implantologists consensus report.

PURPOSE: The International Congress of Oral Implantologists has supported the development of this consensus report involving the use of Cone Beam Computed Tomography (CBCT) in implant dentistry with the intent of providing scientifically based guidance to clinicians regarding its use as an adjunct to traditional imaging modalities. MATERIALS AND METHODS: The literature regarding CBCT and implant dentistry was systematically reviewed. A PubMed search that included studies published between January 1, 2000, and July 31, 2011, was conducted. Oral presentations, in conjunction with these studies, were given by Dr. Erika Benavides, Dr. Scott Ganz, Dr. James Mah, Dr. Myung-Jin Kim, and Dr. David Hatcher at a meeting of the International Congress of Oral Implantologists in Seoul, Korea, on October 6-8, 2011. RESULTS: The studies published could be divided into four main groups: diagnostics, implant planning, surgical guidance, and postimplant evaluation. CONCLUSIONS: The literature supports the use of CBCT in dental implant treatment planning particularly in regards to linear measurements, three-dimensional evaluation of alveolar ridge topography, proximity to vital anatomical structures, and fabrication of surgical guides. Areas such as CBCT-derived bone density measurements, CBCT-aided surgical navigation, and postimplant CBCT artifacts need further research. ICOI RECOMMENDATIONS: All CBCT examinations, as all other radiographic examinations, must be justified on an individualized needs basis. The benefits to the patient for each CBCT scan must outweigh the potential risks. CBCT scans should not be taken without initially obtaining thorough medical and dental histories and performing a comprehensive clinical examination. CBCT should be considered as an imaging alternative in cases where the projected implant receptor or bone augmentation site(s) are suspect, and conventional radiography may not be able to assess the true regional three-dimensional anatomical presentation. The smallest possible field of view should be used, and the entire image volume should be interpreted.

Retrospective clinical evaluation of tapered screw-vent implants: results after up to eight years of clinical function.

Uncertainty about the causes of peri-implant bone loss and difficulties in measuring it often have resulted in omission of bone loss data from published long-term implant studies. This nonrandomized, uncontrolled, retrospective study evaluated the clinical outcomes of treatment with tapered, multithreaded implants with a special emphasis on peri-implant crestal bone status. Chart reviews were conducted of 60 patients who had been treated with 267 implants for the placement of 1 or more missing and/or unsalvageable teeth, and who met general inclusion criteria for dental implant therapy. In all cases, marginal bone changes were calculated from the cementoenamel junction (CEJ) or the implant neck to the crestal bone level with standardized radiographs taken at implant placement (baseline) and during annual follow-up. After a mean followup of 7.5 years, implant survival was 98.5% (263/267) for all implants placed, and implant success was 96.2% (253/263) for all surviving implants. No discernible bone loss was evident in 88% of surviving implants. Crestal bone loss was observed in 25% (15/60) of total study subjects and in 12% (32/263) of all surviving implants: 29 implants exhibited 1 mm of bone loss and 3 implants lost 2 mm of bone. Low-density maxillary jawbone and more extensive bone remodeling, which were required around implants immediately placed into extraction sockets, were the probable causes of observed bone loss in this study. Implants exhibited excellent long-term outcomes with little or no bone loss.

Long-term clinical evaluation of tapered multi-threaded implants: results and influences of potential risk factors.

This prospective study evaluated the long-term performance of tapered screw implants placed in patients with a variety of potentially compromising clinical variables. Sixty patients were treated with 218 implants; each case included one or more potential risk factors associated with increased rates of implant failure, peri-implant bone loss or clinical complications in the dental literature: short implants (23%), comorbid conditions (25%), maxillary implants (61%), immediate loading (88.5%), placement into extraction sockets (91%), and partial edentulism (97%). The implants were restored with a variety of prostheses. Marginal bone changes were calculated utilizing periapical radiographs taken at placement and at all subsequent appointments utilizing a standardized paralleling device and a 1-mm measurement grid. Mean clinical follow-up was 67.5 (range: 1-94) months for implants and 60 (range: 15-74) months for prostheses. Four implants failed to integrate and were immediately replaced by wide-diameter implants. Eight prostheses sustained porcelain fracture (n = 7) or cement failure (n = 1) and were replaced. No peri-implant marginal bone loss was observed for 98% of the implants; the remaining 2% exhibited 1 mm of bone loss. Cumulative survival rates were 98.2% for implants and 96.3% for prostheses after 5 years of clinical loading. Concerns that tapered implant designs may be more prone to crestal bone loss than cylinder designs are unsupported by the results of this study. Tapered implants maintained integration and marginal bone levels despite the presence of one or more potentially compromising variables.

A 10-year retrospective clinical evaluation of immediately loaded tapered maxillary implants.

PURPOSE: The aim of this study was to compare the effects of immediate loading (IL) and delayed loading (DL) on peri-implant crestal bone loss around maxillary implants after long-term functioning. MATERIALS AND METHODS: A retrospective chart review was conducted to assess the outcomes of 110 tapered, multithreaded implants placed for the treatment of one or more missing and/or unsalvageable teeth in the maxilla of 23 patients. Implants were assigned to either the DL or IL database according to loading time. Marginal bone changes were calculated using standardized radiographs taken at implant placement (baseline) and during annual follow-ups. RESULTS: One implant failed in the DL group. After a mean follow-up of 111 months in the DL group and 119 months in the IL group, cumulative implant survival was 99.09% (DL = 98.11%, IL = 100%). No observable bone loss was evident in 83.49% of the surviving implants. Cumulative success rates were 100% for the IL group and 98.11% for the DL group. CONCLUSIONS: Immediately loaded maxillary implants showed long-term results comparable to delayed loaded maxillary implants.

Implant-supported first molar restorations: correlation of finite element analysis with clinical outcomes.

PURPOSE: This study aimed to evaluate the effect of the placement of wide-diameter implants on bone stress concentrations and marginal bone loss in the first molar region. Study hypotheses held that increasing implant diameter would decrease peri-implant bone stress levels, but that statistically significant reductions in clinical bone loss would either (1) not be observed for any implant diameter or (2) be observed only for the widest implant diameter. MATERIALS AND METHODS: Three-dimensional finite element analysis (3D FEA) was used to analyze the relationship between implant diameter and peri-implant bone thickness, cortical bone thickness, occlusal load direction, and percentage of boneto-implant contact on bone stress levels in the first molar region. A retrospective review of patient records was also conducted in three private practices to assess clinical outcomes and bone level changes around one implant design in three diameters (3.7, 4.7, and 6.0 mm) placed in first molar locations. Categorical variable summaries and comparisons of 3D FEA and clinical findings were made using the FREQ procedure, t test procedures (Student t tests, folded F tests, Satterthwaite t tests), and the NONPAR1WAY procedure (Wilcoxon nonparametric test). RESULTS: Cumulative implant success was 98.4% and survival was 98% after a mean of 49.2 months. Although increasing implant diameter always reduced peri-implant stress concentrations in 3D FEA experiments, clinically, only 6.0-mm implants exhibited a statistically significant reduction in bone loss (0 mm) as compared to 3.7-mm and 4.7-mm implants. CONCLUSION: Only 6.0-mm implants were effective in reducing marginal bone loss in the first molar region. 3D FEA results supported previous clinical findings that maintaining approximately 1.8 mm of buccal plate thickness can help reduce bone stress concentrations and preserve buccal bone height. A history of periodontitis may adversely affect long-term marginal bone stability.

Implant success, survival, and failure: the International Congress of Oral Implantologists (ICOI) Pisa Consensus Conference.

The primary function of a dental implant is to act as an abutment for a prosthetic device, similar to a natural tooth root and crown. Any success criteria, therefore, must include first and foremost support of a functional prosthesis. In addition, although clinical criteria for prosthetic success are beyond the scope of this article, patient satisfaction with the esthetic appearance of the implant restoration is necessary in clinical practice. The restoring dentist designs and fabricates a prosthesis similar to one supported by a tooth, and as such often evaluates and treats the dental implant similarly to a natural tooth. Yet, fundamental differences in the support system between these entities should be recognized. The purpose of this article is to use a few indices developed for natural teeth as an index that is specific for endosteal root-form implants. This article is also intended to update and upgrade what is purported to be implant success, implant survival, and implant failure. The Health Scale presented in this article was developed and accepted by the International Congress of Oral Implantologists Consensus Conference for Implant Success in Pisa, Italy, October 2007.

Factors influencing the preservation of the periimplant marginal bone.

Esthetic outcomes cannot be attributed to a single parameter. Rather, as this article shows, they are the result of a number of important factors, especially in the esthetic zone. An understanding of the meaning of biologic width, of the integration of the platform-switching concept into implant treatment facilitates the preservation of a stable marginal bone level around the implant neck. This stable bone then serves to support the soft tissue, determining the long-term esthetic and functional treatment outcomes stability. The following points should be noted: (1) A prefabricated post that can be used both as a temporary post and as the definitive abutment helps to avoid a frequent replacement of secondary components, provided that the 3-dimensional position of the implant is correct. It prevents a repeated destruction of the connective-tissue attachment on the biologic width, which would carry with it the risk of bone resorption. (2) A special implant and abutment design (a ledge and integration of the biologic width/tapered shape of the post) facilitates nonsurgical lengthening and thickening of the periimplant soft tissue. This leads to the establishment of a wider and more resistant zone of connective tissue. (3) A microrough and nanorough titanium surface extending to the implant shoulder in conjunction with the platform-switching concept provides osseous integration along the entire length of the implant. A fine thread optimally distributes the masticatory forces in the region of the implant neck, avoiding further bone loss in this region.

Survival of immediately loaded dental implants in deficient alveolar bone sites augmented with beta-tricalcium phosphate.

PURPOSE: Dental implant placement in atrophic alveolar ridges often necessitates grafting procedures, followed by immediate or delayed implant placement. This study assessed the survival of immediately loaded dental implants placed in deficient alveolar bone sites at bone grafting. MATERIALS: From 1999 to May 2002, 1 operator (A.P.) inserted 1065 implants (607 in mandibles, 458 in maxillae) into 338 partially edentulous patients. Most implants were placed into compromised residual ridges or prepared tooth extraction sockets. Implants placed in augmented areas were splinted to implants in nonaugmented sites for stability. In all cases, beta-tricalcium phosphate was mixed with blood from the surgical site to augment the ridge level or fill spaces between the implant and socket wall. When indicated, the same materials were used for sinus floor augmentation. All implants were tapered screws with roughened surfaces, primarily (75%) from 1 manufacturer. One of the authors (Z.O.) prosthetically restored a total of 189 implants that were placed in 35 patients. In this group of patients, complete restorative data were available. All implants were monitored for 12-48 months (mean = 19.2; median = 24). RESULTS: A total of 1039 implants survived, and 26 failed, including 5 in the anterior mandible and 21 in the maxillae. In the restorative group, 186 implants survived, and 3 maxillary implants failed. All implant failures in this study occurred in the augmented sites. CONCLUSION: Within the limitations of this study, immediate loading of splinted implants in augmented sites is a predictable procedure.

Immediate loading of implant overdentures using modified loading protocol.

To our knowledge, this study shows the first longitudinal results (range 12-30 months) of immediate loading of implant-support overdenture with ball attachment connection placed in the anterior mandible. Immediately after surgery, the overdenture was connected to the implants with 2-ball attachments. The housings were filled with Impregum (3M Espe AG; Seefeld, Germany) impression material to provide retention as well as reduce forces in the initial phase of loading. Of the 28 implants placed, only 1 failed; the 1 failed implant for total implants placed represents a success rate of 96.4%. The minimal bone loss (1 mm) in 2 sites represents a success rate of 92.8%.

Consensus conference on immediate loading: the single tooth and partial edentulous areas.

PURPOSE: A consensus conference was held to determine what the parameters should be for the immediate functional loading of the single-tooth implant restoration and short-span fixed implant-supported bridgework. MATERIALS: Forty-one clinicians and researchers presented cases and situations relating to the topic. A panel then distilled questions that were presented to the audience (430) at large. Answers were gleaned to formulate a consensus. RESULTS: Ten distinct answers evolved that constituted the essence of guidelines for clinicians to be aware of when undertaking immediate loading. These guidelines are contained within the body of the text. CONCLUSIONS: Extreme caution and adherence to a universal generic protocol are suggested for clinicians who are involved with single-tooth and short-span multiple-teeth implant replacements as related to immediate loading as defined within this text.

A concept for the treatment of various dental bone defects.

Untreated dental bone defects usually lead to resorption of alveolar bone. Filling these defects with bone substitute material prevents resorption of bone, preserves the alveolar ridge, and provides sufficient bone for immediate or subsequent implant placement. A variety of bone substitutes is available. They differ in origin, consistency, particle size, porosity, and resorption characteristics. We have treated almost 1000 bony defect sites in 267 patients with the bone regeneration material Cerasorb. Being resorbed simultaneously with the formation of new bone, it is completely replaced by the patient's own vital bone within 6 to 12 months. The representative cases described in this paper demonstrate the successful use of the pure-phase beta-tricalcium phosphate ceramic in the treatment of all dental bone defects.