In situ organic Fenton-like catalysis triggered by anodic polymeric intermediates for electrochemical water purification.

Organic Fenton-like catalysis has been recently developed for water purification, but redox-active compounds have to be ex situ added as oxidant activators, causing secondary pollution problem. Electrochemical oxidation is widely used for pollutant degradation, but suffers from severe electrode fouling caused by high-resistance polymeric intermediates. Herein, we develop an in situ organic Fenton-like catalysis by using the redox-active polymeric intermediates, e.g., benzoquinone, hydroquinone, and quinhydrone, generated in electrochemical pollutant oxidation as H2O2 activators. By taking phenol as a target pollutant, we demonstrate that the in situ organic Fenton-like catalysis not only improves pollutant degradation, but also refreshes working electrode with a better catalytic stability. Both 1O2 nonradical and ·OH radical are generated in the anodic phenol conversion in the in situ organic Fenton-like catalysis. Our findings might provide a new opportunity to develop a simple, efficient, and cost-effective strategy for electrochemical water purification.

Cross-sectional study of posterior tooth root fractures in 2015 and 2019 in a Chinese population.

OBJECTIVES: This study aimed to compare posterior tooth root fractures in endodontically treated teeth versus nonendodontically treated teeth in the Chinese population. MATERIALS AND METHODS: We investigated 500 root fractured posterior teeth in 461 Chinese patients. The clinical information (age, sex of patients, tooth type) were recorded. The fractured teeth were divided into endodontically treated root fractured (ETRF) teeth and nonendodontically treated root fractured (NETRF) teeth. The morphology of the fractured root (circular, oval, other), the orientation of fracture lines (vertical and non-vertical), the restorations performed (crown, filling, non-filling), and the position of the teeth in the dental arch (normal, misaligned) were evaluated based on cone-beam computed tomography images. These data were compared between 2015 and 2019. ETRF% was calculated as ETRF/ETRF + NETRF. Vertical% was calculated as vertical/vertical + non-vertical. RESULTS: There were 177 ETRF teeth and 323 NETRF teeth in this population. The total ETRF% was 29.3% in 2015 and 37.6% in 2019 (P = 0.087). The proportion of vertical root fracture in the ETRF group increased significantly in 2019 compared with that in 2015 (46.2% vs. 80.2%, P = 0.000). The ETRF% in female patients increased by 16.8%, but increased by only 1.2% in male patients in 2019 compared with that in 2015. The ETRF% of mandibular and maxillary premolars increased by 48.5% and 29.3%, respectively. The proportion of crown restoration increased by 2.4% in 2019 compared with that in 2015 in the ETRF group. CONCLUSIONS: The proportion of NETRF teeth and non-vertical root fractures in posterior teeth is high in this Chinese population. The number of vertical root fractures in endodontically treated teeth increased significantly from 2015 to 2019. CLINICAL RELEVANCE: More attention should be paid to endodontic treatment factors in the occurrence of root fractures, especially as female patients and premolars are more susceptible.

In Vitro Proliferation and Anti-Apoptosis of the Papain-Generated Casein and Soy Protein Hydrolysates towards Osteoblastic Cells (hFOB1.19).

Casein and soy protein were digested by papain to three degrees of hydrolysis (DH) 7.3%-13.3%, to obtain respective six casein and soy protein hydrolysates, aiming to clarify their in vitro proliferation and anti-apoptosis towards a human osteoblastic cell line (hFOB1.19 cells). Six casein and soy protein hydrolysates at five levels (0.01-0.2 mg/mL) mostly showed proliferation as positive 17ß-estradiol did, because they conferred the osteoblasts with cell viability of 100%-114% and 104%-123%, respectively. The hydrolysates of higher DH values had stronger proliferation. Casein and soy protein hydrolysates of the highest DH values altered cell cycle progression, and enhanced cell proportion of S-phase from 50.5% to 56.5% and 60.5%. The two also antagonized etoposide- and NaF-induced osteoblast apoptosis. In apoptotic prevention, apoptotic cells were decreased from 31.6% to 22.6% and 15.6% (etoposide treatment), or from 19.5% to 17.7% and 12.4% (NaF treatment), respectively. In apoptotic reversal, soy protein hydrolysate decreased apoptotic cells from 13.3% to 11.7% (etoposide treatment), or from 14.5% to 11.0% (NaF treatment), but casein hydrolysate showed no reversal effect. It is concluded that the hydrolysates of two kinds had estradiol-like action on the osteoblasts, and soy protein hydrolysates had stronger proliferation and anti-apoptosis on the osteoblasts than casein hydrolysates.

Determination of low carbon aldehydes and ketones in cigarette smoke by MXene membrane enrichment-liquid chromatography.

Low carbon aldehydes and ketones are typical substances harmful to human body produced during cigarette smoking. Their contents in cigarette smoke are important indicators for evaluating its toxicity and the filtration effect of cigarette filter tips, which provides important guidance for its rational design. In this work, MXene membrane with unique lamellar structure was synthesized and loaded onto glass fiber filters to achieve effective enrichment of low carbon aldehydes and ketones. Compared to commercial Cambridge filters, the MXene-loaded filters exhibited higher extraction efficiency towards low-carbon aldehydes and ketones, making viable the detection of butyraldehyde, which was not detected by that enriched with Cambridge filters. Therefore, a MXene-based membrane enrichment-HPLC method was developed for the determination of low-carbon aldehydes and ketones in cigarette smoke with detection limits ranging from 0.133 µg/mL to 0.285 µg/mL. The applicability of the method was verified by analyzing three different types of filter cigarettes with the concentration in the range of 0.5-140 µg/branch for all the analytes, which were in good agreement with the manufacturer's results. The method is accurate and sensitive, and can be used for the quantitative determination of low carbon aldehydes and ketones in cigarette smoke.

Patterns of stress distribution of endodontically treated molar under different types of loading using finite element models-the exploring of mechanism of vertical root fracture.

INTRODUCTION: The purpose of this study was to explore the mechanism of vertical root fracture (VRF) using three-dimensional finite element models (FEMs). METHODS: An endodontically treated mandibular first molar with a subtle VRF was collected and scanned with cone beam CT (CBCT). Three finite element analysis models were created: Model 1 had the actual endodontically treated root canal size; Model 2 had the same root canal size as the contralateral homonymous tooth; and Model 3 had the root canal size expanded by 1 mm based on Model 1. Different types of loading were performed on these 3 FEMs. The stress distribution on the cervical, middle, and apical planes was analyzed, and the maximum stress on the root canal wall was calculated and compared. RESULTS: In Model 1, the maximum stress around the root canal wall occurred in the cervical part of the mesial root under vertical masticatory force and in the middle part of the mesial root under buccal and lingual lateral masticatory forces. Additionally, there was a stress change zone in a bucco-lingual direction that corresponded with the actual fracture line. In Model 2, the maximum stress around the root canal was in the cervical part of the mesial root under both vertical and buccal lateral masticatory forces. For Model 3, the stress distribution was similar to that of Model 1, but greater under buccal lateral masticatory force and occlusal trauma force. In all three models, the maximum stress around the root canal wall was in the middle part of the distal root under occlusal trauma force. CONCLUSIONS: The uneven stress around the root canal in the middle part (presented as a stress change zone in a bucco-lingual direction) may be the cause of VRFs.

Characterization of microRNA expression profiles associated with hepatitis B virus replication and clearance in vivo and in vitro.

BACKGROUND AND AIM: Alpha interferon (IFN-α) is an approved treatment for chronic hepatitis B (CHB). MicroRNA (miRNA) are currently known as a part of IFN-mediated antiviral defense. We aimed at characterizing the miRNA expression associated with hepatitis B virus (HBV) replication and IFN-mediated HBV clearance. METHODS: We investigated the expression patterns of cellular miRNA induced by HBV replication and/or IFN-α treatment in HepG2 cells, and also analyzed the miRNA response in peripheral blood mononuclear cells in CHB patients on IFN-α treatment. The differentially expressed miRNA were verified using quantitative real-time polymerase chain reaction and an miRNA expression pattern was classified based on the final virological response. RESULTS: A total of 223 miRNA were differentially expressed (> 1.5 folds) between the HepG2.2.15 and HepG2 cells, including 24 highly differentially expressed miRNA (> 5 folds). With 12 h of IFN-α treatment, 23 totally differentially expressed miRNA were identified in HepG2 cells; whereas only five miRNA were identified in HepG2.2.15 cells. Similar amounts of the miRNA were regulated in patients with HBeAg or non-HBeAg seroconversion; whereas levels of eight miRNA were significantly differentially expressed between the two groups. CONCLUSIONS: HBV replication alters miRNA expression profiles and impairs IFN-inducible miRNA response in HepG2 cells. The miRNA expression pattern of peripheral blood mononuclear cells in CHB patients with IFN therapy can be associated with their therapeutic outcome.

Covalent Labeling-Mass Spectrometry Provides a Molecular Understanding of Noncovalent Polymer-Protein Complexation.

The delivery of functional proteins to the intracellular space offers tremendous advantages for the development of new therapeutics but is limited by the passage of these large polar biomacromolecules through the cell membrane. Noncovalent polymer-protein binding that is driven by strong carrier-cargo interactions, including electrostatics and hydrophobicity, has previously been explored in the context of delivery of functional proteins. Appropriately designed polymer-based carriers can take advantage of the heterogeneous surface of protein cargoes, where multiple types of physical binding interactions with polymers can occur. Traditional methods of assessing polymer-protein binding, including dynamic light scattering, circular dichroism spectroscopy, and fluorescence-based assays, are useful in the study of new polymer-based carriers but face a number of limitations. We implement for the first time the method of covalent labeling-mass spectrometry (CL-MS) to probe intermolecular surface interactions within noncovalent polymer-protein complexes. We demonstrate the utility of CL-MS for establishing binding of an amphiphilic block copolymer to negatively charged and hydrophobic surface patches of a model protein, superfolder green fluorescent protein (sfGFP), using diethylpyrocarbonate as a pseudo-specific labeling reagent. In addition, we utilize this method to explore differences at the intermolecular surface as the ratio of polymer to protein increases, particularly in the context of defining effective protein delivery regimes. By promoting an understanding of the intermolecular interactions in polymer-protein binding and identifying sites where polymers bind to protein surfaces, noncovalent polymer carriers can be more effectively designed for protein delivery applications.

Exploring the use of enhanced cone-beam CT technique to diagnose vertical root fracture.

OBJECTIVES: To explore the feasibility of using sodium iodide (NaI)+dimethyl sulfoxide (DMSO)+ethyl alcohol+ethyl acetate as a cone-beam CT (CBCT) contrast agent in the diagnosis of vertical root fracture (VRF). METHODS: 21 endodontically treated VRF teeth of 21 patients were collected in this study. All these 21 teeth were confirmed subtle fracture lines under transillumination, the number and position of fracture lines were recorded. All these patients had CBCT routine scanning (RS1) before extraction. After extraction, the teeth was performed micro-CT scanning and 3 in vitro CBCT scanning: CBCT routine scanning in vitro(RS2), CBCT enhanced scanning using meglumine diatrizoate (MD) as contrast agent(ES1); and CBCT enhanced scanning using NaI+DMSO+ethyl alcohol+ethyl acetate as contrast agent(ES2). The number of fracture lines was evaluated on all the 5 scanning modes and the accuracy of diagnosis was calculated. RESULTS: In all, there were 43 fracture lines on the 21 teeth. The accuracy of detection of fracture lines of CBCT RS1, RS2, ES1, ES2 and micro-CT was 0%, 20.9% (9/43), 11.6% (5/43), 93% (40/43) and 95.3% (41/43) respectively. Significant differences were found between ES2 vs. RS2, ES2 vs. ES1 (p < 0.01); however, no significant difference was found between ES2 vs. micro-CT (p > 0.05). CONCLUSION: CBCT enhanced scanning using NaI+DMSO+ethyl alcohol+ethyl acetate as contrast agent could be a prospective technique in the diagnosis of VRF.

High biobased content epoxy-anhydride thermosets from epoxidized sucrose esters of Fatty acids.

Novel highly functional biobased epoxy compounds, epoxidized sucrose esters of fatty acids (ESEFAs), were cross-linked with a liquid cycloaliphatic anhydride to prepare polyester thermosets. The degree of cure or conversion was studied using differential scanning calorimetry (DSC), and the sol content of the thermosets was determined using solvent extraction. The mechanical properties were studied using tensile testing to determine Young's modulus, tensile stress, and elongation at break. Dynamic mechanical analysis (DMA) was used to determine glass-transition temperature, storage modulus, and cross-link density. The nanomechanical properties of the surfaces were studied using nanoindentation to determine reduced modulus and indentation hardness. The properties of coatings on steel substrates were studied to determine coating hardness, adhesion, solvent resistance, and mechanical durability. Compared with the control, epoxidized soybean oil, the anhydride-cured ESEFAs have high modulus and are hard and ductile, high-performance thermoset materials while maintaining a high biobased content (71-77% in theory). The exceptional performance of the ESEFAs is attributed to the unique structure of these macromolecules: well-defined compact structures with high epoxide functionality. These biobased thermosets have potential uses in applications such as composites, adhesives, and coatings.

Impact of structure and functionality of core polyol in highly functional biobased epoxy resins.

Highly functional biobased epoxy resins were prepared using dipentaerythritol (DPE), tripentaerythritol (TPE), and sucrose as core polyols that were substituted with epoxidized soybean oil fatty acids, and the impact of structure and functionality of the core polyol on the properties of the macromolecular resins and their epoxy-anhydride thermosets was explored. The chemical structures, functional groups, molecular weights, and compositions of epoxies were characterized using nuclear magnetic resonance (NMR) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, gel permeation chromatography (GPC), and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI MS). The epoxies were also studied for their bulk viscosity, intrinsic viscosity, and density. Crosslinked with dodecenyl succinic anhydride (DDSA), epoxy-anhydride thermosets were evaluated using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), tensile tests, and tests of coating properties. Epoxidized soybean oil (ESO) was used as a control. Overall, the sucrose-based thermosets exhibited the highest moduli, having the most rigid and ductile performance while maintaining the highest biobased content. DPE/TPE-based thermosets showed modestly better thermosetting performance than the control ESO thermoset.

[Studies of electromyography and genetics in children with Charcot-Marie-Tooth disease type 1].

OBJECTIVE: To study the electromyographic and genetic characteristics in children with Charcot-Marie-Tooth disease type 1 (CMT1). METHODS: Routine electromyography and nerve conduction were performed in 24 children with CMT1. Polymerase chain reaction (PCR) combined with restriction enzyme digestion was used to detect gene duplication on chromosome 17p11.2-12. Ten healthy children served as the control group. RESULTS: The peripheral nerve conduction velocity slowed or disappeared in all of the 24 patients (100%). The lesions of the sensory nerves were more severe than the motor nerves, and the lesions of the lower limbs were more severe than the upper limbs. Of 72 muscles detected, 40 (56%) showed neurogenic lesions. The older the patients, the more severe the muscle lesions. Specific junction fragments (1760 bp) were identified in 13 (54%) out of 24 patients, but were not identified in the healthy controls. CONCLUSIONS: The electromyographic changes are characterized by peripheral nerve conduction velocities slowing and neurogenic lesions of muscles in children with CMT1. The PCR combined with restriction enzyme digestion may be a simple and accurate method for gene diagnosis of CMT1.

[Experimental study on the effect of tooth movement with thin and thick aligners in rabbits].

PURPOSE: To explore the effect of tooth movement on lower incisors of rabbits with thin and thick aligners. METHODS: A group of 6 male New Zealand rabbits were randomly divided into 2 groups, the experimental group(n=3) was designed to move the lower incisors distally by 3 steps with thin and thick aligners(0.625 and 0.75 mm)，0.33 mm each；the control group (n=3) was designed to move the teeth by 3 steps with aligner of conventional thickness (0.75 mm), 0.20 mm each. Polyvinyl siloxane impressions were taken before and after aligner placement. The data of tooth movement were measured. SPSS 19.0 software package was used for statistical analysis. RESULTS: The accuracy of tooth movement expression in both groups decreased gradually from the incisal part to the gingival part. The rate of tooth movement in the experimental group was significantly higher than that of the control group（P<0.001）. CONCLUSIONS: The tooth movement of rabbit mandibular central incisor was tipping with the clear aligner. The rate of tooth movement was increased by applying thin and thick aligners，but the accuracy of tooth movement was decreased.

Comparison of diagnosis of cracked tooth using contrast-enhanced CBCT and micro-CT.

OBJECTIVES: To evaluate the diagnostic accuracy using sodium iodide (NaI) and dimethyl sulfoxide (DMSO) as contrast agent in cone beam computed tomography (CBCT) scanning, and compare this with micro-CT. METHODS: 18 teeth were cracked artificially by soaking them cyclically in liquid nitrogen and hot water. After pre-treatment with artificial saliva, the teeth were scanned in four modes: CBCT routine scanning without contrast agent (RS); CBCT with meglumine diatrizoate (MD) as contrast agent (ES1); CBCT with NaI + DMSO as contrast agent (ES2); and micro-CT (mCT). The number of crack lines was evaluated in all four modes. Depth of crack lines and number of cracks presented from the occlusal surface to the pulp cavity (Np) in ES2 and micro-CT images were evaluated. RESULTS: There were 63 crack lines in all 18 teeth. 45 crack lines were visible on ES2 images as against four on the RS and ES1 images (p<0.05) and 37 on micro-CT images (p>0.05). Further, 34 crack lines could be observed on both ES2 and micro-CT images, and the average depth presented on ES2 images was 4.56 ± 0.88 mm and 3.89 ± 1.08 mm on micro-CT images (p<0.05). More crack lines could be detected from the occlusal surface to the pulp cavity on ES2 images than on micro-CT images (22 vs 11). CONCLUSION: CBCT with NaI +DMSO as the contrast agent was equivalent to micro-CT for number of crack lines and better for depth of crack lines. NaI + DMSO could be a potential CBCT contrast agent to improve diagnostic accuracy for cracked tooth.

Interferon Gamma-Inducible Protein 16 of Peripheral Blood Mononuclear Cells May Sense Hepatitis B Virus Infection and Regulate the Antiviral Immunity.

Interferon gamma-inducible protein 16 (IFI16) is a DNA sensor protein, which triggers interferon-beta (IFN-ß) production. However, the role of IFI16 in the innate immunity against hepatitis B virus (HBV) remains controversial. Peripheral blood mononuclear cells (PBMCs) and serum specimens were collected from 20 patients with chronic hepatitis B (CHB) receiving Peg-IFN-α2b therapy. IFI16 mRNA/protein of PBMCs and serum IFI16 at baseline and changes during Peg-IFN-α2b treatment were detected. The interaction between IFI16 and HBV DNA in the PBMCs was analyzed using chromatin immunoprecipitation assay. Leukemic T cell line CEM-C7 and HBV-replicating HepG2.2.15 cells were used to test the effects of interferon treatment and HBV replication on IFI16 expression. Compared with healthy controls, lower levels of IFI16 mRNA but more significant expression of IFI16 protein with heterogeneous degradation were detected in PBMCs of CHB patients. Early changes in IFI16 mRNA, but not IFNB mRNA of PBMCs or serum IFI16, were correlated to HBeAg seroconversion of Peg-IFN-α2b therapy. An interaction between IFI16 and HBV DNA was detected in the PBMCs. In the cultured HepG2.2.15 and CEM-C7 cells, interferons resulted in the translocalization of IFI16 from the cytoplasm to the nucleus and inhibited IFI16 degradation. IFI16 of PBMCs may play a role in sensing HBV infection, and early change in IFI16 mRNA of PBMCs is valuable to predict HBeAg seroconversion in Peg-IFN-α2b treatment. The influences on IFI16 degradation and subcellular location may present a molecular mechanism of antiviral activity of interferon.

Ionic Hydrogen-Bonded Organic Frameworks for Ion-Responsive Antimicrobial Membranes.

Functionalization of hydrogen-bonded organic frameworks (HOFs) for specific applications has been a long-lasting challenge in HOF materials. Here, an efficient way to integrate functional species in the HOF structure through constructing an anionic framework is presented. The obtained HOFs, taking PFC-33 (PFC = porous materials from FJIRSM,CAS) as an example, integrate a porphyrin photosensitizer as a porous backbone and a commercial biocide as counterions in the structure. The permanent channels and the electrostatic interaction between the framework and the counterions provide PFC-33 ion-responsive biocide-release behavior in various physiological environments, thus exhibiting synergistic photodynamic and chemical antimicrobial efficiency. The unbonded carboxyl groups residing on the HOF surface further allow for manipulating the interfacial interaction between the PFC-33 and the polymer matrix for membrane fabrication. Therefore, a polyHOF membrane with high stability, desired flexibility, and good permeability is obtained, which demonstrates noticeable bacterial inhibition toward Escherichia coli. This study may shed light on the functionalization of HOF materials for broad application potentials.

Clinical effects of three types of silicone intubations in repairing lacerations of canaliculus.

OBJECTIVE: To evaluate the clinical effects of one-passage, double-passage and circular canalicular intubations in repairing lacerations of canaliculus. METHODS: A total of 109 eyes in 109 cases of canalicular laceration were repaired with three types of silicone intubations, among which 23 with one-passage canalicular intubation, 51 with double-passage canalicular intubation, and 35 with circular canalicular intubation. The average follow-up period was 12-15 months. RESULTS: The wound/junction of the lacrimal canaliculi was ruptured in 5 cases (9.80%) of the double-passage group, 3 cases (8.57%) of the circular group, and 8 cases (34.78%) of the one-passage group. The rupture incidence of the one-passage group was significantly higher than that of the other two groups (X(2) equal to 9.416, P less than 0.01). During the intubation, canaliculitis was observed in 12 cases (23.53%) of the double-passage group, while only 3 cases (8.57%) in the circular group and 8 cases (34.78%) in the one-passage group. The circular group had significantly lower incidence of canaliculitis than the other two groups (X(2) equal to 6.095, P less than 0.05). After extubation 6 months after laceration repair, the lacrimal passage remained patent with canalicular irrigation in 46 cases (90.20%) in the double-passage group, 30 cases (85.71%) in the circular group and 15 cases (65.22%) in the one-passage group. Six months after surgery, the canalicular patency in the one-passage group was significantly lower than that of the other two groups (X(2) equal to 7.390, P less than 0.05). CONCLUSIONS: Circular canalicular intubation is more stable and has less surgical complications than the double-passage and one-passage canalicular intubations. It is also more effective clinically 12-15 months after laceration surgery.

[Finite element analysis of clear aligners in extractive cases].

PURPOSE: This study analysed the mechanical features of the extraction space closure in clear aligners through mechanical research. METHODS: A patient with four first premolars extraction was chosen as sample, and four plans with clear aligners for space closure were designed, including anterior retraction entirely, anterior retraction dispersedly, posterior movement mesially and posterior movement dispersedly. Finite element analysis was performed separately. RESULTS: In anterior retraction, when there was no anterior space, the force acted on them more evenly, and the posteriors needed to provide more anchorage; when anterior space existed, the force acted on the central incisors first and largely, and the posteriors needed to provide less anchorage. In posterior anchorage, when the posteriors moved entirely with mesial movement, it might help to protect second premolar's anchorage while molars would receive more mesial force; when the posteriors moved separately without designed movement, the second premolar would undertake more anchorage and more tendency to incline mesially; when the posteriors moved entirely without designed movement, the anchorage would distribute more evenly. CONCLUSIONS: Selection of the way of retracting anteriors should be based on the difference of stress distribution in different ways in addition to individual discrepancy and clinical facts. Selection of the way of moving posteriors should be based on the distribution of anchorage as well as avoiding posterior open bite. Less amount of correction in each step has better axial control.

Folate-conjugated pluronic/polylactic acid polymersomes for oral delivery of paclitaxel.

Cancer chemotherapy and the patient's life will be more convenient if oral administration of anti-cancer drugs can be achieved. The feasibility of folate-targeted Pluronic F127/polylactic acid (FA-F127-PLA) polymersomes as the oral delivery carriers of paclitaxel (PTX) has been explored in this study. PTX loaded in FA-F127-PLA and PLA-F127-PLA polymersomes showed biphasic release behaviors in simulated gastric and intestinal fluids. PTX loaded in FA-F127-PLA polymersomes exhibited higher cytotoxicity and cellular uptake than PTX loaded in PLA-F127-PLA polymersomes. In vivo pharmacokinetic studies in rats showed that oral PTX loaded in FA-F127-PLA polymersomes had a higher bioavailability than oral PTX loaded in PLA-F127-PLA polymersomes. D-α-tocopheryl poly(ethylene glycol) 1000 succinate (TPGS or Vitamin E TPGS) was also added to the FA-F127-PLA polymersomes as an optimization agent. Compared with PTX-loaded FA-F127-PLA polymersome, PTX-loaded FA-F127-PLA/TPGS mixed polymersomes showed even better cytotoxic ability, more cellular uptake and higher bioavailability. The above results indicate that FA-F127-PLA and FA-F127-PLA/TPGS mixed polymersomes could be good candidates for the oral delivery carrier of anti-cancer drugs.

Comparing the osteoconductive potential between tubular and cylindrical beta-tricalcium phosphate scaffolds: An experimental study in rats.

Beta-tricalcium phosphate (ß-TCP) has been widely used for bone regeneration for many years. However, there are few studies on the osteoconduction ability of different shaped ß-TCP scaffolds. In this study, we compared the osteoconductive potential between the tubular and cylindrical ß-TCP scaffolds in long bone defect animal model. The results showed that more regenerated bone and a better healing property were observed in tubular group than that in cylindrical group. By hematoxylin-eosin staining, the central part of the callus was more compacted in tubular group. And moreover, the increased osteocalcin and osterix expression were found in tubular group, suggesting more vigorous regeneration of bone defect. These results demonstrated that tubular ß-TCP scaffold would be more benefit to promote bone regeneration, indicating that tubular ß-TCP scaffold has a good potential for long bone defect repair in clinical practice. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1934-1940, 2018.

Polyglycolic Acid Fibrous Scaffold Improving Endothelial Cell Coating and Vascularization of Islet.

BACKGROUND: Improving islet graft revascularization has become a crucial task for prolonging islet graft survival. Endothelial cells (ECs) are the basis of new microvessels in an isolated islet, and EC coating has been demonstrated to improve the vascularization and survival of an islet. However, the traditional method of EC coating of islets has low efficiency in vitro. This study was conducted to evaluate the effect of a polyglycolic acid (PGA) scaffold on the efficiency of islet coating by ECs and the angiogenesis in the coated islet graft. METHODS: A PGA fibrous scaffold was used for EC coating of islet culture and was evaluated for its efficiency of EC coating on islets and islet graft angiogenesis. RESULTS: In in vitro experiments, we found that apoptosis index of ECs-coating islet in PGA group (27% ± 8%) was significantly lower than that in control group (83% ± 20%, P < 0.05) after 7 days culture. Stimulation index was significantly greater in the PGA group than in the control group at day 7 after ECs-coating (2.07 ± 0.31 vs. 1.80 ± 0.23, P < 0.05). vascular endothelial growth factor (VEGF) level in the PGA group was significantly higher than the coating in the control group after 7 days culture (52.10 ± 13.50 ng/ml vs. 16.30 ± 8.10 ng/ml, P < 0.05). Because of a tight, circumvallated, adhesive and three-dimensional growth microenvironment, islet cultured in a PGA scaffold had higher coating efficiency showing stronger staining intensity of enzyme than those in the control group after 14 days of culture following ECs-coating. For in vivo study, PGA scaffold significantly prolonged the average survival time of EC-coated islet graft after transplantation compared with control group (15.30 ± 5.60 days vs. 8.30 ± 2.45 days, P < 0.05). The angiogenesis and area of survived grafts were more in the PGA group compared with the control group by measuring the mean microvessel density (8.60 ± 1.21/mm2 vs. 5.20 ± 0.87/mm2, P < 0.05). In addition, expression of VEGF and tyrosin-protein kinase receptor (Tie-2) gene increased in PGA scaffold group than that in control group by real-time reverse transcription-polymerase chain reaction analysis. CONCLUSIONS: These results demonstrate that the efficiency of EC coating of islets was successfully increased by culturing ECs on a PGA scaffold. This method enhances the function, survival, and vascularization of isolated islets in vitro and in vivo.