Ancient DNA and multimethod dating confirm the late arrival of anatomically modern humans in southern China.

The expansion of anatomically modern humans (AMHs) from Africa around 65,000 to 45,000 y ago (ca. 65 to 45 ka) led to the establishment of present-day non-African populations. Some paleoanthropologists have argued that fossil discoveries from Huanglong, Zhiren, Luna, and Fuyan caves in southern China indicate one or more prior dispersals, perhaps as early as ca. 120 ka. We investigated the age of the human remains from three of these localities and two additional early AMH sites (Yangjiapo and Sanyou caves, Hubei) by combining ancient DNA (aDNA) analysis with a multimethod geological dating strategy. Although U-Th dating of capping flowstones suggested they lie within the range ca. 168 to 70 ka, analyses of aDNA and direct AMS 14C dating on human teeth from Fuyan and Yangjiapo caves showed they derive from the Holocene. OSL dating of sediments and AMS 14C analysis of mammal teeth and charcoal also demonstrated major discrepancies from the flowstone ages; the difference between them being an order of magnitude or more at most of these localities. Our work highlights the surprisingly complex depositional history recorded at these subtropical caves which involved one or more episodes of erosion and redeposition or intrusion as recently as the late Holocene. In light of our findings, the first appearance datum for AMHs in southern China should probably lie within the timeframe set by molecular data of ca. 50 to 45 ka.

Overcoming the Low-Stability Bottleneck in the Clinical Translation of Liposomal Pressurized Metered-Dose Inhalers: A Shell Stabilization Strategy Inspired by Biomineralization.

Currently, several types of inhalable liposomes have been developed. Among them, liposomal pressurized metered-dose inhalers (pMDIs) have gained much attention due to their cost-effectiveness, patient compliance, and accurate dosages. However, the clinical application of liposomal pMDIs has been hindered by the low stability, i.e., the tendency of the aggregation of the liposome lipid bilayer in hydrophobic propellant medium and brittleness under high mechanical forces. Biomineralization is an evolutionary mechanism that organisms use to resist harsh external environments in nature, providing mechanical support and protection effects. Inspired by such a concept, this paper proposes a shell stabilization strategy (SSS) to solve the problem of the low stability of liposomal pMDIs. Depending on the shell material used, the SSS can be classified into biomineralization (biomineralized using calcium, silicon, manganese, titanium, gadolinium, etc.) biomineralization-like (composite with protein), and layer-by-layer (LbL) assembly (multiple shells structured with diverse materials). This work evaluated the potential of this strategy by reviewing studies on the formation of shells deposited on liposomes or similar structures. It also covered useful synthesis strategies and active molecules/functional groups for modification. We aimed to put forward new insights to promote the stability of liposomal pMDIs and shed some light on the clinical translation of relevant products.

Co-exposure to nanoplastics and acetaminophen causes skeletal dysplasia and behavioral abnormalities in zebrafish.

Nanoplastics (NPs) and acetaminophen (APAP) are thought to be common contaminants and are invariably detected in the environment. Despite the increasing awareness of their toxicity to humans and animals, the embryonic toxicity, skeletal development toxicity, and mechanism of action of their combined exposure have not been clarified. This study was performed to investigate whether combined exposure to NPs and APAP induces abnormal embryonic and skeletal development in zebrafish and to explore the potential toxicological mechanisms. All zebrafish juveniles in the high-concentration compound exposure group showed some abnormal phenomena such as pericardial edema, spinal curvature, cartilage developmental abnormality and melanin inhibition together with a significant downward trend in body length. Behavioral data also implicated that the exposure of APAP alone, as well as the co-exposure of NPs and APAP, caused a depression in the total distance, swimming speed and the maximum acceleration. Furthermore, real-time polymerase chain reaction analysis showed that compared with exposure alone, the expression level of genes related to osteogenesis, runx2a, runx2b, Sp7, bmp2b and shh was significantly reduced with compound exposure. These results suggest that the compound exposure of NPs and APAP has adverse impacts on zebrafish embryonic development and skeletal growth.

Major difference in particle size, minor difference in release profile: a case study of solid lipid nanoparticles.

Solid lipid nanoparticles (SLN) have been widely used in a variety of drug delivery routes, which have the outstanding advantage of controlled drug release. The release of SLN is dominated by many factors, among which the particle size of SLN is a critical one. The aim of this project was to explore the relationship between drug release profile and particle size of SLN. SLN were synthesized via the hot high-pressure homogenization (HPH) method, budesonide (BUD) was used as the model drug, and BUD-SLN1-BUD-SLN4 with increasing particle size was obtained, i.e. 120, 240, 360, and 480 nm. The prepared SLN has good encapsulation efficiency, drug loading capacity, and stability. In vitro release behavior studies showed that the cumulative release of BUD-SLN in Tris-Maleate (Tris-M) media was negligible, while that in Tris-M plus pancreatin media or Tris-M-ethanol media obeyed Ritger-Peppas model or first-order kinetic model, respectively. Noticeably, the release behavior of SLN was to some extent related to the average particle size of SLN, but the correlation was insignificant when the intersection degree of particle size distribution was great. This study provides a new idea for the understanding of in vitro release of SLN and has a certain referencing value for the research and development of novel nanomedicines.

Nanostructure of DiR-Loaded Solid Lipid Nanoparticles with Potential Bioimaging Functions.

The fluorescence dye-loaded nanoparticles are widely used as bioimaging agents in the field of nanotheranostics. However, the nanoparticles for nanotheranostics usually consist of synthetic materials, such as metal, silica, and organic polymers, which are often biologically incompatible and may arouse toxicity issues. Herein, the potential of near-infrared probe DiR-containing solid lipid nanoparticle suspensions (DiR-SLNS) as the bioimaging agent, which was prepared by lipids and surfactants with excellent biocompatibility, was investigated in this study. The nanostructure of DIR-SLNS system and the distribution of DiR were studied by dissipative particle dynamics (DPD) simulations. The stability of physicochemical properties and fluorescence spectra of DIR-SLNS system were investigated using dynamic laser scattering (DLS), nanoparticle tracking analysis (NTA), and fluorescence spectra. The fluorescence intensity-concentration correlation of DIR-SLNS was also evaluated. As a result, DiR-SLNS demonstrated a "core-shell"-like nanostructure and DiR was mainly distributed in the cetyl palmitate (CP) core rather than the surface of SLNS, which was beneficial to its potential applications in bioimaging. DiR-SLNS exhibited remarkable physicochemical stability as the nanoparticles maintained ~ 90% fluorescence intensity during the 10-day storage time. The correlation between fluorescence intensity and concentration was established and validated using a linear regression model. This study proposed a type of promising candidates in nano-scale with higher safety and fluorescence stability for bioimaging.

Poly(L-Glutamic Acid)-Based Brush Copolymers: Fabrication, Self-assembly, and Evaluation as Efficient Nanocarriers for Cationic Protein Drug Delivery.

Protein drugs were considered to be the first choice to treat many human diseases, but their clinical application was usually limited by their short half-life and lack of validated targeted therapy. Here, a series of folate-functionalized poly(ethylene glycol)-b-(poly(2-aminoethyl-L-glutamate)-g-poly(L-glutamic acid))s (FA-PEG-b-(PELG-g-PLGA)s) were designed as tumor-targeted carriers for cationic protein delivery. Compared with traditional copolymers consisting of PEG and linear charged hydrophilic blocks, FA-PEG-b-(PELG-g-PLGA) with brush-like polyelectrolyte segments were beneficial to improving their electrostatic interactions with loading protein molecules, thus increasing drug-loading stability and protecting encapsulated proteins from degradation. The designed polymer brushes could efficiently encapsulate cytochrome C (CytC), a cationic model protein, to form polyion complex (PIC) micelles with an average particle size of approximately 200 nm. An in vitro drug release study showed that the drug-loading stability of the formed PIC micelles was largely improved. The functionalization of the block copolymer carriers with a targeting folate group enhanced the tumor cell growth inhibition and total apoptotic rates induced by CytC. Our results shed light on the unique advantages of brush-like polymer carriers in delivering cationic proteins, and the poly(L-glutamic acid)-based linear-brush diblock copolymers could be applied as a versatile delivery platform for molecular targeting in cancer therapy.

Modified-release oral pellets for duodenum delivery of doxycycline hyclate.

To minimize the gastric and esophageal injury effect, a system to deliver doxycycline hyclate (DOXY) to the duodenum area is needed. DOXY-containing modified-release oral pellets (DMOP) coated with hydroxypropyl methylcellulose phthalate HP-55 (HPMCP HP-55) and hydroxypropyl methylcellulose E15 (HPMC E15) appear to be a reasonable choice. This coating layer dissolves at pH 5.5, which is the pH of the duodenum, but not at a gastric pH (1.2). The formulation and preparation of DMOP were optimized, and a scale-up test was performed. The results showed that the production reproducibility was acceptable, and the quality of DMOP well met the standards of Chinese Pharmacopeia (Ch.P, 2015 edition). Notably, the accumulated DOXY release was lower than 50% at pH 1.2 (20 min) and higher than 85% at pH 5.5, which met the USP40-NF35 standard for DOXY modified-release formulations. Moreover, the storage stability of DMOP with different packages was investigated by stress testing, accelerated and long-term testings. The stability of DMOP was maintained up to 12 months, in terms of DOXY content and in vitro release behavior. The results seem to suggest that DMOP could be a promising duodenum delivery system.

Formation Mechanism, In vitro and In vivo Evaluation of Dimpled Exenatide Loaded PLGA Microparticles Prepared by Ultra-Fine Particle Processing System.

Spherical poly (D, L-lactic-co-glycolic acid) microparticles (PLGA-MPs) have long been investigated in order to achieve sustained delivery of proteins/peptides. However, the formation mechanism and release characteristics of the specific shape MPs were still unknown. This study aimed to develop a novel-dimpled exenatide-loaded PLGA-MPs (Exe-PLGA-MPs) using an ultra-fine particle processing system (UPPS) and investigate the formation mechanism and release characteristics. Exe-PLGA-MPs were prepared by UPPS and optimized based on their initial burst within the first 24 h and drug release profiles. Physicochemical properties of Exe-PLGA-MPs, including morphology, particle size, and structural integrity of Exe extracted from Exe-PLGA-MPs, were evaluated. Furthermore, pharmacokinetic studies of the optimal formulation were conducted in Sprague-Dawley (SD) rats to establish in vitro-in vivo correlations (IVIVC) of drug release. Exe-PLGA-MPs with dimpled shapes and uniform particle sizes achieved a high encapsulation efficiency (EE%, 91.50 ± 2.65%) and sustained drug release for 2 months in vitro with reduced initial burst (20.42 ± 1.64%). Moreover, the pharmacokinetic studies revealed that effective drug concentration could be maintained for 3 weeks following a single injection of dimpled Exe-PLGA-MPs with high IVIVC. Dimpled PLGA-MPs prepared using the UPPS technique could thus have great potential for sustained delivery of macromolecular proteins/peptides.

Isolated Bilateral Macrostomia.

Macrostomia (Tessier's 7 cleft) is a rare congenital lip deformity. Macrostomia can occur unilateral or bilateral, isolated or associated with other syndromes. Isolated bilateral macrostomia is exceedingly rare with only a few cases reported to date. The authors report 6 cases of isolated bilateral macrostomia surgically repaired in 4-layered approaches. The traditional method was improved and the result obtained was satisfactory after longest follow-up of 3 years. The technique is easy to imitate, simple in design, aesthetically and functionally corrects the deformity.

Influence of Polymers on the Physical and Chemical Stability of Spray-dried Amorphous Solid Dispersion: Dipyridamole Degradation Induced by Enteric Polymers.

Amorphous solid dispersions (ASDs) are inherently unstable because of high internal energy. Evaluating physical and chemical stability during the process and storage is essential. Numerous researches have demonstrated how polymers influence the drug precipitation and physical stability of ASDs, while the influence of polymers on the chemical stability of ASDs is often overlooked. Therefore, this study aimed to investigate the effect of polymers on the physical and chemical stability of spray-dried ASDs using dipyridamole (DP) as a model drug. Proper polymers were selected by assessing their abilities to inhibit drug recrystallization in supersaturated solutions. HPMC E5, Soluplus®, HPMCP-55, and HPMCAS-LP were shown to be effective stabilizers. The optimized formulations were further stored at a high temperature (60 °C) and high humidity (40 °C, 75% RH) for 2 months, and their physical and chemical stability was evaluated using polarizing optical microscopy, FTIR, HPLC, and mass spectrometry (MS). In general, crystallization was observed in all samples, which indicated the physical instability under stressed storage conditions. Also, it was noted that the polymers in ASDs rather than physical mixtures, induced a dramatic drug degradation after being exposed to a high temperature (HPMCP-55 > 80% and HPMCAS-LP > 50%) and high humidity (HPMCP-55 > 40% and HPMCAS-LP > 10%). The MS analysis further confirmed the degradation products, which might be generated from the reaction between dipyridamole and phthalic anhydride decomposed from HPMCP-55 and HPMCAS-LP. Overall, the exposure of ASDs to stressed conditions resulted in recrystallization and even the chemical degradation induced by polymers.

Production and in vitro evaluation of a lamotrigine extended release tablet based on a controlled-porosity osmotic pump system.

Osmotic pump delivery systems have made significant advances in the past decades for controlled drug release over a long period of time. Usually, osmotic pump products require sophisticated and expensive laser drill technology resulting in increase in production cost and decrease in production efficiency. In this study, a lamotrigine extended release tablet based on a controlled-porosity osmotic pump (CPOP) system was developed to circumvent laser drill technology in reference, Lamictal XR®. The tablet core was coated by a polymer blend of Acryl-EZE® and HPMC E5. Lactose and HPMC were added in the CPOP core to adjust the release profile. An orthogonal design was employed to optimize the formulation from factors, i.e., core composition, coating materials ratio and coating levels. Comparisons of in vitro drug release profiles were also conducted. The optimized formulation showed a satisfactory zero-order release profile (R2 = 0.9912). Similarity factor, f2 of 77 was obtained in larger scale. The lamotrigine extended release tablets based on the CPOP system showed ideal reproducibility and stability. The developed system has the ability to be an alternative production method for Lamictal XR®, which could circumvent the laser drill technology and promote the osmotic pump generalization.

The Serum-Resistant Transfection Evaluation and Long-Term Stability of Gene Delivery Dry Powder Based on Mesoporous Silica Nanoparticles and Polyethyleneimine by Freezing-Drying.

Mesoporous silica nanoparticles (MSNs) with large surface area, tunable pore size, and low toxicity can act as suitable vehicles for drug and gene delivery. An MSN/DNA/PEI complex delivery system was prepared by using MSNs to hold plasmid DNA coated with polyethyleneimine (PEI), and the dry powder formulation was produced by freeze-drying with trehalose as lyoprotectant. The MSN/DNA/PEI complexes successfully enhanced the gene expression with about 1.5-fold higher efficiency as compared with the control, and even better effects and lower toxicity were achieved at lower content of PEI. Also, this gene delivery system showed nearly sixfold higher efficiency in the serum-containing condition than the control, so further application of these vehicles in vivo is highly appreciated. Besides, the trehalose containing lyophilized formulation could hold the availability for at least 4 months of storing at room temperature, presenting the potential for industrial production and transportation of gene therapy.

Glycyrrhetinic Acid-Mediated Polymeric Drug Delivery Targeting the Acidic Microenvironment of Hepatocellular Carcinoma.

PURPOSE: The major hurdle of current drug carrier against hepatocellular carcinoma (HCC) is the lack of specific and selective drug delivery to HCC. In this study, a novel glycyrrhetinic acid (GA) and poly(L-Histidine) (PHIS) mediated polymeric drug delivery system was developed to target HCC that have GA binding receptors and release its encapsulated anticancer drug in the acidic microenvironment of HCC. METHODS: Firstly, GA and PHIS were conjugated to form poly (ethylene glycol)-poly(lactic-co-glycolic acid) (GA-PEG-PHIS-PLGA, GA-PPP) micelles by grafting reaction between active terminal groups. Secondly, andrographolide (AGP) was encapsulated to GA-PPP to make AGP/GA-PPP using the solvent evaporation method. The pH-responsive property of AGP/GA-PPP micelles was validated by monitoring its stability and drug release behavior in different pH conditions. Furthermore, selective hepatocellular uptake of GA-PPP micelles in vitro, liver specific drug accumulation in vivo, as well as the enhanced antitumor effects of AGP/GA-PPP micelles confirmed the HCC targeting property of our novel drug delivery system. RESULTS: Average size of AGP/GA-PPP micelles increased significantly and the encapsulated AGP released faster in vitro at pH 5.0, while micelles keeping stable in pH 7.4. AGP/GA-PPP micelles were uptaken more efficiently by human Hep3B liver cells than that by human MDA-MB-231 breast cancer cells. GA-PPP micelles accumulated specifically in the liver and possessed long retention time in vivo. AGP/GA-PPP micelles significantly inhibited tumor growth and provided better therapeutic outcomes compared to free AGP and AGP/PEG-PLGA(AGP/PP) micelles without GA and PHIS decoration. CONCLUSIONS: This novel GA-PPP polymeric carrier is promising for targeted treatment of HCC.

Comparison of novel granulated pellet-containing tablets and traditional pellet-containing tablets by artificial neural networks.

Novel granulated pellets technique was adopted to prepare granulated pellet-containing tablets (GPCT). GPCT and traditional pellet-containing tablets (PCT) were prepared according to 29 formulations devised by the Design Expert 7.0, with doxycycline hydrochloride as model drug, blends of Eudragit FS 30D and Eudragit L 30D-55 as coating materials, for the comparison study to confirm the superiority of GPCT during compaction. Eudragit FS 30D content, coating weight gain, tablet hardness and pellet size were chosen as influential factors to investigate the properties and drug release behavior of tablets. The correlation coefficients between the experimental values and the predicted values by artificial neural networks (ANNs) for PCT and GPCT were 0.9474 and 0.9843, respectively, indicating the excellent prediction of ANNs. The similarity factors (f2) for release profiles of GPCT and the corresponding original pellets were higher than those of PCT, suggesting that the excipient layer of granulated pellets absorbed the compressing force and protected the integrity of coating films during compaction.

[Preparation and release behaviour of mesoporous silica/ethylcellulose sustained-release mini-matrix].

Hot-melt extrusion was applied to prepare mesoporous silica/ethylcellulose mini-matrix for sustained release, and fenofibrate was used as a model drug, ethylcellulose and xanthan gum were chosen as sustained-release agent and releasing moderator, respectively. This novel matrix obtained the controlled release ability by combining mesoporous silica drug delivery system and hot-melt extrusion technology. And mesoporous silica particle (SBA-15) was chosen as drug carrier to increase the dissolution rate of fenofibrate in this martix. Scanning electron microscope, transmission electron microscope, small angle X-ray powder diffraction and N2 adsorption-desorption were introduced to determine the particle morphology, particle size and pore structure of the synthesized SBA-15. The results showed that SBA-15 had a very high Brunauer-Emmett-Teller specific surface area, a narrow pore size distribution, large pore volume and a ordered two-dimensional hexagonal structure of p6mm symmetry. Differential scanning calorimetry and X-ray powder diffraction results demonstrated that fenofibrate dispersed in an amorphous state inside the pores of the mesoporous silica which contributed to the improvement in the dissolution rate. The drug release of mini-matrices was influenced by ethylcellulose viscosity grades and xanthan gum concentration, which increased with the increasing of xanthan gum concentration and decreasing of ethylcellulose viscosity. Mini-matrix containing 22% xanthan gum exhibited a good sustained release performance, and the drug release behavior followed the first-order kinetics.

Biomaterials-assisted cancer vaccine delivery: preclinical landscape, challenges, and opportunities.

INTRODUCTION: Cancer vaccines (protein and peptide, DNA, mRNA, and tumor cell) have achieved remarkable success in the treatment of cancer. In particular, advances in the design and manufacture of biomaterials have made it possible to control the presentation and delivery of vaccine components to immune cells. AREAS COVERED: This review summarizes findings from major databases, including PubMed, Scopus, and Web of Science, focusing on articles published between 2005 and 2024 that discuss biomaterials in cancer vaccine delivery. EXPERT OPINION: The development of cancer vaccines is hindered by several bottlenecks, including low immunogenicity, instability of vaccine components, and challenges in evaluating their clinical efficacy. To transform preclinical successes into viable treatments, it is essential to pursue continued innovation, collaborative research, and address issues related to scalability, regulatory pathways, and clinical validation, ultimately improving outcomes against cancer.

Looking back, moving forward: protein corona of lipid nanoparticles.

Lipid nanoparticles (LNPs) are commonly employed for drug delivery owing to their considerable drug-loading capacity, low toxicity, and excellent biocompatibility. Nevertheless, the formation of protein corona (PC) on their surfaces significantly influences the drug's in vivo fate (such as absorption, distribution, metabolism, and elimination) upon administration. PC denotes the phenomenon wherein one or multiple strata of proteins adhere to the external interface of nanoparticles (NPs) or microparticles within the biological milieu, encompassing ex vivo fluids (e.g., serum-containing culture media) and in vivo fluids (such as blood and tissue fluids). Hence, it is essential to claim the PC formation behaviors and mechanisms on the surface of LNPs. This overview provided a comprehensive examination of crucial aspects related to such issues, encompassing time evolution, controllability, and their subsequent impacts on LNPs. Classical studies of PC generation on the surface of LNPs were additionally integrated, and its decisive role in shaping the in vivo fate of LNPs was explored. The mechanisms underlying PC formation, including the adsorption theory and alteration theory, were introduced to delve into the formation process. Subsequently, the existing experimental outcomes were synthesized to offer insights into the research and application facets of PC, and it was concluded that the manipulation of PC held substantial promise in the realm of targeted delivery.

The Comparison between Spinal Facet Joint Toothed Plate and Traditional Pedicle Screw-rod on Reduction of Thoracolumbar Fracture.

OBJECTIVE: Thoracolumbar fractures are one of the most common fractures in clinical practice. Surgical intervention is recommended to restore spinal alignment or decompress the nerves when there are unstable fractures or neurological injuries. However, after excessive forward thrust force restoration, facet joint dislocation often occurs between the upper vertebra and the fractured vertebra, which usually leads to unsatisfactory reduction outcomes. Herein, we propose a novel spinal facet joint toothed plate to assist in fracture reduction. The purpose of this study is to evaluate the effectiveness of the new spinal facet joint toothed plate in preventing facet joint dislocation, and its advantages compared to traditional pedicle screw-rod decompression. METHODS: A total of 26 patients in the toothed plate group and 93 patients in the traditional group who experienced thoracolumbar fracture with reduction were retrospectively included. Relevant patients' information and clinical parameters were collected. Furthermore, visual analogue scores (VAS) scores and Oswestry disability index (ODI) scores were also collected. Moreover, imaging parameters were calculated based on radiographs. Correlated data were analyzed by χ2 test and t test. RESULTS: All patients in this study had no postoperative complications. Postoperative VAS scores and ODI scores (p < 0.001) were statistically significant (p < 0.001) in both groups compared with preoperative scores and further decreased (p < 0.001) at final follow-up. In addition, the postoperative vertebral margin ratio (VMR) (p < 0.001) and vertebral angle of the injured vertebrae (p < 0.001) were significantly improved compared with the preoperative period. There were no significant differences in postoperative VAS scores and ODI scores between the two groups. However, toothed plate reduction significantly improved the VMR (p < 0.05) and vertebral angle (p < 0.05) compared with conventional reduction. Ultimately, the total screw accuracy was 98.72% (sum of levels 0 and I), with 100% screw accuracy in the segment related to the tooth plate in the tooth plate group. The dislocation rate was higher in the conventional group (6.45%) than in the new serrated plate repositioning group (0.00%). CONCLUSION: The facet toothed plate assisted reduction method prevents facet joint dislocation and improves fracture reduction compared to traditional reduction technique, hence it could be considered as a novel surgical strategy for thoracolumbar fracture reduction.

State-of-the-art strategies to enhance the mechanical properties of microneedles.

Microneedles (MNs) have gained increasing attention in the biomedical field, owing to their notable advantages over injectable and transdermal preparations. The mechanical properties of MNs are the key to determine whether MNs can puncture the skin for efficient drug delivery and therapeutic purposes. However, there is still lacking of a systemic summary on how to improve the mechanical properties of MNs. Herein, this review mainly analyzes the key factors affecting the mechanical properties of MNs from the theoretical point of view and puts forward improvement approaches. First, we analyzed the major stresses exerted on the MNs during skin puncture and described general methods to evaluate the mechanical properties of MNs. We then provided detail examples to elucidate how the physicochemical properties of single polymer, formulation compositions, and geometric parameters affected the mechanical properties of MNs. Overall, the mechanical strength of MNs can be enhanced by tuning the crosslinking density, crystallinity degree, and molecular weight of single polymer, introducing polysaccharides and nano-microparticles as reinforcers to form complex with polymer, and optimizing the geometric parameters of MNs. Therefore, this review will provide critical guidance on how to fabricate MNs with robust mechanical strength for successful transdermal drug delivery.

Spatiotemporal fate of nanocarriers-embedded dissolving microneedles: the impact of needle dissolving rate.

OBJECTIVE: Dissolving microneedles (DMNs) have shown great potential for transdermal drug delivery due to their excellent skin-penetrating ability and combination with nanocarriers (NCs) can realize targeted drug delivery. The objective of this study was to investigate the impact of microneedle dissolving rate on the in vivo fate of NC-loaded DMNs, which would facilitate the clinical translation of such systems. METHODS: Solid lipid nanoparticles (SLNs) were selected as the model NC for loading in DMNs, which were labeled by P4 probes with aggregation-quenching properties. Sodium hyaluronate acid (HA) and chitosan (CS), with different aqueous dissolving rates, were chosen as model tip materials. The effects of needle dissolving rate on the in vivo fate of NC-loaded DMNs was investigated by tracking the distribution of fluorescence signals after transdermal exposure. RESULTS: P4 SLNs achieved a deeper diffusion depth of 180 µm in DMN-HA with a faster dissolution rate, while the diffusion depth in DMN-CS with a slower dissolution rate was lower (140 µm). The in vivo experiments demonstrated that P4 SLNs had a T1/2 value of 12.14 h in DMN-HA, whilst a longer retention time was found in DMN-CS, with a T1/2 of 13.12 h. CONCLUSIONS: This study confirmed that the in vivo diffusion rate of NC-loaded DMNs was determined by the dissolving rate of DMNs materials and provided valuable guidance for the design and development of NC-loaded DMNs in the future.