Influence of facial width on the perception of lip protrusion and its differences between profile and 3-dimensional video clip.

INTRODUCTION: This study evaluated the influence of facial width on the perception of lip protrusion and investigated the concordance between 2-dimensional (2D) profile images and 3-dimensional (3D) video clips in assessing lip protrusion. METHODS: An Asian female standard head model was created using 3D modeling software. Eight head models were constructed by modifying the standard head model in terms of facial width (broad, neutral, and slim) and lip protrusion (retrusive, straight, and protrusive). Overall, 97 Asian raters rated the lip protrusion from the 2D profiles and 3D rotation video clips of the 9 models. RESULTS: No significant differences were found in the perception of lip protrusion in terms of sex, age, or occupation. Compared with the 2D profiles, the 3D video clips were rated as more protrusive in 8 of the 9 head models, with the retrusive broad, retrusive neutral, straight broad, and straight slim faces showing statistical significance (P <0.01). The rating is significantly higher in slim faces than in broad faces across the 3 groups of 2D profiles (P <0.01). For 3D video clips, the rating was higher in slim faces than in broad faces in all 3 groups, whereas differences were significant in the straight and protrusive groups only (P <0.01). CONCLUSIONS: In this study, 3D video clips were more sensitive to the perception of lip protrusion than were 2D profiles to some extent. The lips were rated relatively more protrusive in a slim face than in a broad face. Therefore, the relationship between facial width and lip protrusion should be considered in orthodontic treatment goals and treatment plans.

Minimum required length of orthodontic microimplant: a numerical simulation and clinical validation.

INTRODUCTION: This study aimed to determine the minimum required length of microimplants (MIs) to prevent excessive micromotion during MI healing that can lead to MI failure. METHODS: Hypothesizing that the implantation depth of MI in cancellous bone (IDcancel) is the key to the control of micromotion during MI healing, we numerically investigated the minimum IDcancel required to maintain MI micromotion to below the threshold (30 µm) that would threaten MI survival. Twenty MI and bone models were built using MIs of 4 lengths and bone specimens with 5 different cortical bone thicknesses to create IDcancel in the 0.5-5.5 mm. Then, applying a horizontal force of 1.5 N on the MI head, we calculated the micromotion (peak and average MI micromotions) and determined the minimum IDcancel. A clinical test was performed to verify the numerical result by placing 160 MIs in the posterior maxilla and mandible. RESULTS: A strong correlation (r2= 0.694) was found to exist between IDcancel and MI micromotion. A minimum of 2.5 mm of IDcancel was needed to maintain the level of MI micromotion (peak micromotion) <30 µm threshold. The 6-month survival rate of MI was strongly correlated with IDcancel (r2= 0.744) and decreased sharply when IDcancel was ≤2 mm. CONCLUSIONS: The minimum lengths of MIs to provide the minimum IDcancel of 2.5 mm required to promote successful MI healing in the posterior maxilla and mandible are 5.2 and 6.5 mm, respectively.

Correlation between insertion torque and peri-implant bone strain during placement of orthodontic mini-implants: A finite element study.

INTRODUCTION: Insertion torque is the amount of torque exerted on the implant to tighten into the bone. We investigated whether insertion torque values could be correlated with the strain level in the peri-implant cortical bone resulting from mini-implant insertion. METHODS: The insertion of a standard size mini-implant (φ 1.4 mm × 7 mm) into maxillary alveolar bone was simulated using the finite element method. A total of 3600 calculation steps were employed to numerically reproduce the mini-implant insertion process and analyze the insertion torque and strain distribution in bone. Special attention was given to the relationship between insertion torque values and strain level in the cortical bone at the final tightening. The strain level was quantified using the following 3 strain parameters: (1) average insertion strain, (2) peak insertion strain recorded near the mini-implant thread tips, and (3) the size of the damage zone in the cortical bone. Correlations between the insertion torque values and these 3 parameters were analyzed using linear regression. RESULTS: Direct proportionality and strong correlation were found between the insertion torque values and each of the 3 strain parameters: average insertion strain (r2 = 0.91), peak insertion strain (r2 = 0.91), and the size of damage zone (r2 = 0.90) in the peri-implant cortical bone. CONCLUSIONS: The results of this finite element method study demonstrated that insertion torque could serve as a reliable indicator of the strain level in the peri-implant cortical bone resulting from mini-implant insertion.

Evidence-based selection of orthodontic miniscrews, increasing their success rate in the mandibular buccal shelf. A randomized, prospective clinical trial.

BACKGROUND: Skeletal anchorage has made it possible to perform complex orthodontic tooth movements that are difficult or even impossible to achieve with conventional orthodontic treatment. Mandibular buccal shelf miniscrews, used for distalization, play a particularly important role in treatment of Class III malocclusion. Unfortunately, stability of the miniscrews placed in the mandible is still considered at higher risk of failure compared to other intraoral locations. The aim of our study was to determine the influence of the miniscrew size on their long-term stability, occurrence of oral mucosa inflammation and pain lasting over 48 h after implantation. METHODS: 184 Absoanchor® miniscrews (Dentos, South Korea) in two sizes: SH2018-10 (length 10 mm, ø 1.8-2.0 mm) and SH1514-08 (length 8 mm, ø 1.4-1.5 mm) were inserted in the mandibular buccal shelf in 92 Caucasians aged 20-50 years, diagnosed with Class III malocclusion that required en-masse distalization of the mandibular dentition. Data was statistically analyzed with the level of significance set at p = .05. RESULTS: 91.3% of the SH2018-10 and 75% of the SH1514-08 miniscrews were stable, and this difference was statistically significant (p < .05). Inflammation of the oral mucosa was noticed around both types of miniscrews and affected 50% of the SH2018-10 and 26.09% of the SH1514-08 group (p < .05). Pain lasting longer than 48 h after implantation was related to 60.87% and 20.65% of the SH2018-10 and the SH1514-08 miniscrews (p < .05), respectively. Inflammation associated with larger SH2018-10 miniscrews did not affect their stability (p > .05), contrary to the SH1514-08 ones (p < .05). When inflammation was present, the overall success rate declined to 64.29%, from 94.74% noted for TADs without inflammation. According to the log-rank test, smaller TADs failed significantly sooner than the larger ones (p = .002). CONCLUSION: Larger SH2018-10 miniscrews are the anchorage of choice for the mandibular buccal shelf, despite triggering inflammation and long-lasting pain significantly more often than the smaller ones. Therefore, this issue should be discussed with every patient prior to miniscrew use. Trial registration ID: ClinicalTrials.gov Identifier: NCT05280678 Date of Registration: 15/03/2022. Retrospectively registered.

Treatment of severe mandibular deficiency following TMJ ankyloses by distraction osteogenesis and orthodontic treatment with microimplants.

Severe mandibular deficiency caused by temporomandibular joint (TMJ) ankyloses produces functional and aesthetic problems that require complicated long-term treatment. In this case report, we describe the benefits of using microimplant mechanics for controlling the direction of distraction during distraction osteogenesis and for performing the movement of teeth. We also present its remarkable results and long-term stability. A 20-year-old girl presented with a convex profile due to severe mandibular retrognathia after a history of several TMJ surgeries for bilateral TMJ ankyloses. Mandibular distraction osteogenesis (MDO) was performed, and elastics were placed between the microimplants to control the direction of distraction. Subsequently, after retraction of the maxillary anterior teeth and distalisation of the whole mandibular dentition, the facial profile was markedly improved, and good interdigitation was obtained. The six-year follow-up retention and overall stability were satisfactory with good interdigitation and jaw function.

Does maxillary yaw exist in patients with skeletal Class III facial asymmetry?

INTRODUCTION: This study aimed to evaluate maxillary skeletal and dental yaw in patients with skeletal Class III facial asymmetry and investigate its correlation with menton deviation. METHODS: Initial cone-beam computed tomography data from 60 patients with skeletal Class III malocclusion were used. There were 30 patients in both the symmetrical group (menton deviation <2 mm) and the asymmetrical group (menton deviation >4 mm). After reconstruction of 3-dimensional (3D) cone-beam computed tomography data, maxillary yaw and 3D positions of skeletal and dental landmarks were measured and compared between the groups. After that, correlations between menton deviation and the other variables were assessed. RESULTS: No significant difference was noted in maxillary skeletal and dental yaw between the 2 groups. In the assessment of 3D positions, translation of the maxillary bone and maxillary dentition toward the menton deviation was observed (P <0.01). Maxillary skeletal and dental yaw was not significantly correlated with menton deviation in the asymmetrical group. CONCLUSIONS: Maxillary skeletal and dental yaw was not evident in either group. Therefore, when planning maxillary surgery for patients with skeletal Class III facial asymmetry malocclusion, it may be appropriate to shift the focus of decompensation from maxillary yaw to maxillary translation.

Considerations for vertical control with microimplants in a idiopathic condylar resorption patient: A case report.

Idiopathic condylar resorption (ICR) is a rare, destructive temporomandibular joint disease characterised by progressive resorption of the condyles. This case report presents a record of an orthodontically treated patient with ICR with favourable posttreatment remodelling of the condyles. An 18-year-old woman sought treatment for ICR. A severe Class II high-angle facial pattern with resorption of bilateral condyles was evident. The treatment plan was determined after careful examination of condylar radiographs and comprised forward rotation of the mandible through full-arch intrusion with microimplants after extraction of the four premolars. The treatment was completed in 35 months, and the patient was noted to have a straight profile, good interdigitation and slightly increased condylar volume. Two years after retention, the condyles were stable, and the patient's profile and occlusion remained acceptable despite a mild relapse of the mandibular position. ICR was successfully corrected with orthodontic treatment. Counter-clockwise mechanics applied during the ICR remission period not only improved facial aesthetics but were also suitable for condylar unloading.

Analysis of dental compensation in patients with facial asymmetry using cone-beam computed tomography.

INTRODUCTION: The purpose of this research was to evaluate dental compensation in facial asymmetry and its correlation with skeletal variables using cone-beam computed tomography. METHODS: Sixty adult patients were retrospectively divided into asymmetry (mean age, 21.8 ± 5.4 years) and symmetry groups (mean age, 28.1 ± 4.1 years); both groups comprised 30 patients. Independent and paired t tests were used for comparisons between the asymmetry and symmetry groups and between deviated (Dv) and nondeviated (NDv) sides of the asymmetry group, respectively. Pearson correlation between dental and skeletal variables was performed. RESULTS: The mean value of menton deviation was 9.4 mm in the asymmetry group. Compared with the symmetry group, the direction and amount of dental compensation of the asymmetry group were as follows: 2.5-mm extrusion of the maxillary first molar (UM6) at NDv (P <0.05); 1.8-mm higher position of the mandibular canine (LC) from the mandibular horizontal plane using mental foramen (MHP_mf) at NDv (P <0.05); 6°-more buccoversion of UM6 at Dv; 3.7°-more linguoversion of UM6 at NDv; 4.8°-more buccoversion of the maxillary canine (UC) at Dv; 4.9°-more buccoversion of the mandibular molar (LM6) at NDv; and 2.6°-more linguoversion of LC at Dv. Dental compensation correlated or marginally correlated with skeletal variables of the deviated mandible. CONCLUSIONS: Dental compensations, extrusion of the maxillary molars on the NDv, and buccal tipping of the maxillary teeth and lingual tipping of the mandibular teeth on the Dv, were observed. The mandibular body length was associated with linguoversion of the mandibular molars on the Dv. The ramal inclination was related to the extrusion of the maxillary molars on the NDv.

Differences in distances between maxillary posterior root apices and the sinus floor according to skeletal pattern.

INTRODUCTION: The aim of this study was to evaluate the distances from the maxillary posterior root apices to the inferior wall of the maxillary sinus using cone-beam computed tomography images and the relationships between roots and maxillary sinus according to age, sex, and skeletal pattern. METHODS: Three-dimensional images of each root were checked, and the distances were measured along the true vertical axis from the apex of the root to the sinus floor in 118 patients (63 male, 55 female) aged 10 to 28 years. Compare-means statistic tests were done to assess the differences between groups classified according to age, sex, and skeletal pattern. RESULTS: The frequency of root contact with the sinus floor increased from 70% at the second premolar to more than 80% at the buccal roots of the first and second molars. Male and older age (20-28 years) groups had significantly smaller distances or more protrusion of the root into the sinus than female and younger age (10-20 years) groups. The distances were shorter, or there was more protrusion of the root into the sinus in the hyperdivergent, down-canted palatal plane, and large gonial angle groups. CONCLUSIONS: Male, older age, hyperdivergent skeletal pattern, and large gonial angle groups had significantly closer distances between maxillary root tips and the sinus floor or more protrusion of the roots into the sinus. The intrusion of the maxillary molars in those situations may be difficult and slow because of the pneumatized maxillary sinus.

Effect of adhesive resin flexibility on enamel fracture during metal bracket debonding: an ex vivo study.

OBJECTIVE: To test the null hypothesis that neither the flexural properties of orthodontic adhesive resins nor the enamel pre-treatment methods would affect metal bracket debonding behaviours, including enamel fracture. MATERIALS AND METHODS: A dimethacrylate-based resin (Transbond XT, TX) and two methyl methacrylate (MMA)-based resins (Super-Bond C&B, SB; an experimental light-cured resin, EXP) were tested. Flexural strength and flexural modulus for each resin were measured by a three-point-bending test. Metal brackets were bonded to human enamel pretreated with total-etch (TE) or self-etch adhesive using one of the three resins (a total of six groups, n = 15). After 24 hours of storage in water at 37°C, a shear bond strength (SBS) test was performed using the wire loop method. After debonding, remaining resin on the enamel surfaces and occurrence of enamel fracture were assessed. Statistical significance was set at P < 0.05. RESULTS: The two MMA resins exhibited substantially lower flexural strength and modulus values than the TX resin. The mean SBS values of all groups (10.15-11.09MPa) were statistically equivalent to one another (P > 0.05), except for the TE-TX group (13.51MPa, P < 0.05). The two EXP groups showed less resin remnant. Only in the two TX groups were enamel fractures observed (three cases for each group). LIMITATIONS: The results were drawn only from ex vivo experiments. CONCLUSIONS: The hypothesis is rejected. This study suggests that a more flexible MMA resin is favourable for avoiding enamel fracture during metal bracket debonding.

Stability of mandibular setback surgery with and without presurgical orthodontics.

PURPOSE: The purpose of this study was to compare stability after mandibular setback surgery in patients with skeletal Class III malocclusion with and without presurgical orthodontics. MATERIALS AND METHODS: This retrospective cohort study included consecutive patients with skeletal Class III malocclusion who underwent only mandibular surgery. Patients treated with the surgery-first approach without presurgical orthodontics (SF group) were compared with a control group (conventional surgery with presurgical orthodontics; CS group) using lateral cephalograms taken preoperatively, immediately postoperatively, and at the time of debonding. Predictor variables (group and timing), outcome variables (cephalometric measurements over time), and other variables, such as baseline characteristics, were evaluated to determine the difference in stability of mandibular positions such as the B point. RESULTS: Sixty-one patients were enrolled in this study (CS group, n = 38; SF group, n = 23). Baseline demographic variables were similar in the 2 groups except for orthodontic treatment period. The mean setback of the mandible at the B point was similar (CS group, 8.7 mm; SF group, 9.1 mm; difference, P > .05), but the horizontal relapse in the SF group (2.4 mm) was significantly greater than in the CS group (1.6 mm; P < .05). Patients with a horizontal relapse greater than 3 mm comprised 39.1% of the SF group compared with 15.8% of the CS group (P < .05). CONCLUSION: Mandibular sagittal split ramus osteotomy without presurgical orthodontic treatment was less stable than conventional orthognathic surgery for mandibular prognathism. Before performing a surgery-first approach, skeletal stability needs to be considered.

Recovery bone formation on radiographic palatal bone dehiscences after incisor retraction with microimplants.

OBJECTIVES: To investigate the difference in labial and palatal alveolar bone thickness and height during the retention period after incisor retraction treatment with microimplant. MATERIALS AND METHODS: A sample of 21 patients (mean age: 17.80 ± 4.38 years) who underwent incisor retraction treatment using microimplants after premolar extraction was investigated. The cone-beam computed tomography images at pretreatment, posttreatment, and retention were used to measure anterior alveolar bone thickness (labial, palatal, and total; at three vertical levels) and height (labial and palatal) and differences in the incisor position during treatment or retention. Repeated-measures analysis of variance with Bonferroni correction was performed to compare the variables at T0, T1, and T2. RESULTS: The maxillary central incisor moved posteriorly by approximately 8.0 mm along with intrusive movement of 1.8 mm after treatment. The alveolar bone thickness significantly decreased on the palatal side and increased on the labial side after treatment. Thereafter, the palatal bone thickness significantly increased and labial bone thickness decreased during the retention period. The palatal interdental bone depressed by incisor retraction showed substantial bone deposition after retention. CONCLUSIONS: Radiographic palatal bone dehiscences on the incisor root and palatal bone depression between the incisor roots were apparent after treatment. This palatal bone loss around the incisor roots noticeably recovered with newly formed bone during retention.

The effect of different mechanical retention forms on shear bond strength of rebonding of ceramic brackets.

The objective of this study is to compare the shear bond strength (SBS) and the morphological characteristics and chemical compositions of the base surface of newly bonded and rebonded ceramic brackets with different mechanical retention bases. Sixty extracted human premolars were divided into the newly bonded and rebonded groups. Ceramic brackets with patterned, laser-etched, and particle-coated patterned bases were randomly bonded to the tooth samples in each group (n=10 per base type). The rebonded brackets exhibited significantly lower SBS than the newly bonded brackets (p<0.05). The main chemical composition of the brackets in both groups was aluminum on the energy-dispersive X-ray spectroscopy. Scanning electron microscopy imaging showed the presence of regular-shaped undercuts or irregular micro-undercuts on the bracket bases which mostly remained intact even after debonding and sandblasting, while coated particles disappeared. The rebonded ceramic brackets with mechanical retention bases exhibited clinically acceptable bond strength regardless of retentive forms.

Congenital macroglossia treated by 2-stage partial glossectomy.

Persistent macroglossia affects speech, swallowing, and the dentofacial skeleton. A range of tongue reduction methods have been proposed to preserve the mobility and sensation of the tongue. However, recent reports have shown that speech or esthetic problems still exists, even after a comprehensive glossectomy in early childhood. Because a large volume reduction of the anterior tongue in young growing children might result in a short tongue tip with functional difficulties, it is important to select the appropriate tongue reduction method considering the growth of the tongue.In the current report, a staged tongue reduction was planned to minimize the functional and esthetic problems after surgery. A 3-year-old girl visited our clinic because of congenital macroglossia, phonation problems, and prognathic appearance of the mandible. The tongue was first reduced by a central glossectomy. The speech intelligibility, tongue movement, and skeletal growth pattern were improved after the first surgery. The secondary peripheral tongue reduction was performed 6 years later to achieve an esthetically pleasing tongue appearance.This 2-stage partial glossectomy, central tongue reduction first followed later by a peripheral tongue reduction, ensures functional integrity of the tongue and can provide an esthetically pleasing result in growing children. The results demonstrated that this strategic combination of a staged tongue reduction can be a successful treatment option for macroglossia.

Mandibular asymmetry types and differences in dental compensations of Class III patients analyzed with cone-beam computed tomography.

OBJECTIVES: To assess differences in dental compensation of the incisors and first molars in skeletal Class III patients with roll-, yaw-, and translation-dominant mandibular asymmetries. MATERIALS AND METHODS: A total of 90 skeletal Class III adult patients (mean age, 22.00 ± 3.31 years; range, 18-37.9 years) with facial asymmetry were enrolled and divided into the roll-, yaw-, and translation-dominant type groups (n = 30 per group). The vertical, transverse, and anteroposterior distances and axial angles of the teeth were measured using cone-beam computed tomography images. The measurements were compared between the deviated and nondeviated sides using a paired t-test and among the three groups using one-way analysis of variance with a Tukey post hoc test. RESULTS: The roll-dominant groups showed the greatest values for the bilateral difference in the vertical position of the maxillary (2.42 ± 1.24 mm) and mandibular molars (2.23 ± 1.28 mm; P < .001). The transverse deviations of the maxillary (2.19 ± 1.51 mm) and mandibular incisors (-2.11 ± 1.39 mm) were greater in the yaw-dominant groups than those of other groups. Regarding tooth axial angle, the yaw-dominant group showed the greatest tipping of the mandibular incisor (-4.13 ± 3.30°; P < .001). CONCLUSIONS: Dental compensation differed depending on the type of facial asymmetry. The roll-dominant type showed more vertical compensation of the posterior teeth, whereas the yaw-dominant type exhibited more tipping of the molars and incisors. By precisely assessing dental compensation in each asymmetry type, sufficient dental decompensation could be achieved.

Nonsurgical orthodontic correction of facial asymmetry by condylar remodeling and mandibular repositioning following occlusal cant correction with microimplants: a case report.

Recently, the demand for correcting facial asymmetry has been increasing, even when the extent of asymmetry is small. This case report describes nonsurgical orthodontic treatment for facial asymmetry in a 13-year-old female patient, facilitated by moving the deviant mandible to the nondeviated side after correcting for relevant dental compensation using microimplants. Mandibular repositioning was attempted using intermaxillary elastics between the microimplants placed into each jaw and guided by resin that was bonded on the maxillary first molar of the deviated side. To enhance mandibular movement, correction of the transverse occlusal cant and buccolingual inclination of the teeth were also performed. After 65 months of gradual treatment, facial symmetry, with favorable occlusion and jaw function, was achieved. These satisfactory results, including a well-balanced face and good occlusal interdigitation, were well maintained at the 53-month follow-up. Direct and functional forces applied against deviant functional forces can reduce facial asymmetry by differential growth or modeling of the condyle.