RESUMO
The portability of electronic-based biosensors is limited because of the use of batteries and/or solutions containing reactants such as enzymes for assay, which limits the utility of such biosensors in point-of-care (POC) testing. In this study, we report on the development of a self-powered biosensor composed of only portable components: a reactant-containing poly (ethylene glycol) (PEG) film for the colorimetric assay, and a self-powered n-InGaZnO/p-Si photodetector. The PEG film containing enzymes and color-developing agents was formed on a glass slide by spin coating. The self-powered biosensor was fabricated by placing the hybrid film on the p-n junction photodetector, and applied in non-invasive glucose detection (salivary glucose). Injection of the target-containing solution dissolved the PEG that led to the release of enzymes and color-developing agents, resulting in a colorimetric assay. The colorimetric assay could attenuate the light reaching the photodetector, thus facilitating target concentration verification by measuring the photocurrent. Our self-powered biosensor has two main advantages: (i) all components of the biosensor are portable and (ii) dilution of target concentration is avoided as the reagents are in the PEG film. Therefore, the self-powered biosensor, without solution-phase components, could be highly beneficial for creating portable, sensitive biosensors for POC testing.
Assuntos
Técnicas Biossensoriais , Colorimetria , Fontes de Energia Elétrica , Glucose , PolímerosRESUMO
Electronic biosensors operating without power supply are high in demand owing to increasing interest in point-of-care (POC) coupled with portable and wearable electronic devices for smart healthcare services. Although self-powered electronic sensors have emerged with the promise of resolving the energy supply problems, achieving sufficient sensitivity to targets in real samples is highly challenging because of the matrix effect caused by electroactive species. In this study, we developed a self-powered biosensor platform by combining n-indium gallium zinc oxide (IGZO)/p-Si heterojunction photodetectors and physically separated colorimetric reactions. The self-powered biosensors were applied to glucose detection in real human samples using light sources from daily life environments such as fluorescent light and sunlight. The sensors showed high sensitivity and stability from 0.01 to 10 mg mL-1 of glucose in human saliva and urine without matrix effect from the electroactive species in real samples. In addition, a small change in glucose concentration in human serum was distinguishable with a resolution of 0.01 mg mL-1. Notably, these results were obtained using well-developed and widely used materials like Si and IGZO with simple deposition techniques. Moreover, this self-powered biosensing platform can be universally applied for the detection of all biomolecules being detected by colorimetric assays. To the best of our knowledge, this is the first report on such self-powered biosensors, which could be a promising candidate for future POC biosensors integrated with portable and wearable electronic devices.