Modified vestibuloplasty of the zygomaticoalveolar crest to gain intradefect support for an obturator prosthesis.

This clinical report details a novel surgical modification at the time of maxillectomy to improve obturator function. A vestibuloplasty and split thickness skin graft of the zygomaticoalveolar crest created a denture-bearing surface that, when engaged, provided support and stability for the obturator prosthesis. This report outlines the surgical and prosthodontic procedures and the results achieved.

Assessment of Bone Height Changes Based on the Cone-Beam Computed Tomography Following Intentional Replantation for Periodontally Compromised Teeth.

Background and Objectives; This study aimed to evaluate the clinical outcomes and bone changes before and after intentional replantation (IR) for periodontally compromised teeth by using cone-beam computed tomography (CBCT). Materials and Methods; Fourteen periodontally involved teeth were selected for IR. A preoperative orthodontic procedure was performed to apply luxation, and the tooth was then gently extracted. Retrograde filling of the root-end canal was performed. Once the tooth was repositioned in the socket, it was splinted with the adjacent tooth. After three months, prosthetic restoration was performed. Results; Clinical parameters and CBCT images were obtained before and after the IR procedure. The height of the alveolar bone was measured on the CBCT images by using software. Most preoperative symptoms, including pain, mobility, probing depth (PD) and bleeding on probing (BOP), significantly decreased after IR (pain: 4.71 to 1.00; mobility: 1.36 to 0.29; PD: 5.60 to 2.85; BOP: 3.50 to 0.79). CBCT analysis indicated an increase in bone height after IR (the amount of change: maxilla, 4.00; mandible, 1.95). Conclusions; A previous study reported that IR for periodontally involved teeth is quite limited. However, in this study, IR of periodontally compromised teeth showed favorable results in clinical and radiographic evaluations, suggesting that IR may be an alternative to extraction of teeth with periodontal disease.

Gamma analysis dependence on specified low-dose thresholds for VMAT QA.

The American Association of Physicists in Medicine Task Group 119 instructed institutions to use a low-dose threshold of 10% or a region of interest determined by the jaw setting when they collected gamma analysis quality assurance (QA) data for the planar dose distribution. However, there are no clinical data to quantitatively demonstrate the impact of the low-dose threshold on the gamma index. Therefore, we performed a gamma analysis with various low-dose thresholds in the range of 0% to 15% according to both global and local normalization and different acceptance criteria (3%/3 mm, 2%/2 mm, and 1%/1 mm). A total of 30 treatment plans--10 head and neck, 10 brain, and 10 prostate cancer cases--were randomly selected from the Varian Eclipse treatment planning system (TPS). For the gamma analysis, a calculated portal image was acquired through a portal dose calculation algorithm in the Eclipse TPS, and a measured portal image was obtained using an electronic portal-imaging device. Then, the gamma analysis was performed using the Portal Dosimetry software (Varian Medical Systems, Palo Alto, CA). The gamma passing rate (%GP) for the global normalization decreased as the low-dose threshold increased, and all low-dose thresholds led to %GP values above 95% for both the 3%/3 mm and 2%/2 mm criteria. However, for the local normalization, %GP for a low-dose threshold of 10% was 7.47%, 10.23%, and 6.71% greater than the low-dose threshold of 0% for head and neck, brain, and prostate for the 3%/3 mm criteria, respectively. The results indicate that applying the low-dose threshold to global normalization does not have a critical impact on patient-specific QA results. However, in the local normalization, the low-dose threshold level should be carefully selected because the excluded low-dose points could cause the average %GP to increase rapidly.

Development of a frailty prevention program including nutrition and exercise interventions for older adults in senior daycare centers in South Korea using a mixed methods research design.

BACKGROUND/OBJECTIVES: The growing aging population has led to an increased utilization of senior daycare centers. This study was conducted to design a program to enhance the health of older adults in senior daycare centers in Chuncheon City, South Korea. SUBJECTS/METHODS: The study explored the health conditions and dietary patterns of older adults in senior daycare centers. Participants included staff and older adults from senior daycare centers in Chuncheon City. A mixed methods research design was used to obtain both qualitative and quantitative data. Qualitative insights were obtained through in-depth interviews with 26 staff members and older adults, coupled with observations made at 10 senior daycare centers. The quantitative component comprised structured questionnaires and physical measurements of 204 older adults at these centers. RESULTS: Many of the older adults relied on the meals provided by the center due to their limited cooking abilities. Dental health issues and dysphagia were common. Interviews highlighted the budgetary constraints of the centers in providing wholesome meals and the need for government support to alleviate meal expenses and enhance quality. A structured survey of older adults showed that the average age was 83.3 yrs, with an average of 2 chronic conditions per participant. Frailty analysis of the participants revealed that 56.2% were prefrail and 32.0% were frail. Almost half of the participants (47.0%) used dentures. Based on these findings, a preventive intervention program was proposed, addressing the specific needs and challenges of older adults while promoting overall well-being and preventing frailty. CONCLUSION: Tailored health promotion strategies are crucial in senior daycare centers. Recommended interventions include staff nutrition education, improved dietary plans, and cost-effective strength training programs. These interventions aim to reduce frailty and enhance the quality of life of older adults in the community via interventions in daycare centers.

Rhizobial oxidized 3-hydroxylbutanoyl glycan-based gelatin hydrogels with enhanced physiochemical properties for pH-responsive drug delivery.

Rhizobial exopolysaccharide (EPS) is an acidic polysaccharide involved in nitrogen fixation-related signal transduction in the rhizosphere, serving as a structural support for biofilms, and protecting against various external environmental stresses. Rhizobial EPS as a hydrogel biomaterial was used for a pH-responsive drug delivery system combing with gelatins. Pure gelatin (GA) hydrogels have limited practical applications due to their poor mechanical strength and poor thermal stability. We developed new GA hydrogels using oxidized 3-hydroxylbutanoyl glycan (OHbG) as a polymer cross-linking agent to overcome these limitations. OHbG was synthesized from sodium periodate oxidation of 3-hydroxylbutanoyl glycan directly isolated from Rhizobium leguminosarum bv. viciae VF39. The newly fabricated OHbG/GA hydrogels exhibited 21-fold higher compressive stress and 4.7-fold higher storage modulus (G') than GA at the same strain. This result suggested that OHbG provided mechanical improvement. In addition, these OHbG/GA hydrogels showed effective pH-controlled drug release for 5-fluorouracil, self-healable, and self-antioxidant capacity by uronic acids of OHbG. Cell viability tests using HEK-293 cells in vitro also showed that the OHbG/GA hydrogels were non-toxic. This suggests that the new OHbG/GA hydrogels can be used as a potentially novel biomaterial for drug delivery based on its self-healing ability, antioxidant capacity, and pH-responsive drug delivery.

Genetic engineering of human stem cells for enhanced angiogenesis using biodegradable polymeric nanoparticles.

Stem cells hold great potential as cell-based therapies to promote vascularization and tissue regeneration. However, the use of stem cells alone to promote angiogenesis remains limited because of insufficient expression of angiogenic factors and low cell viability after transplantation. Here, we have developed vascular endothelial growth factor (VEGF) high-expressing, transiently modified stem cells for the purposes of promoting angiogenesis. Nonviral, biodegradable polymeric nanoparticles were developed to deliver hVEGF gene to human mesenchymal stem cells (hMSCs) and human embryonic stem cell-derived cells (hESdCs). Treated stem cells demonstrated markedly enhanced hVEGF production, cell viability, and engraftment into target tissues. S.c. implantation of scaffolds seeded with VEGF-expressing stem cells (hMSCs and hESdCs) led to 2- to 4-fold-higher vessel densities 2 weeks after implantation, compared with control cells or cells transfected with VEGF by using Lipofectamine 2000, a leading commercial reagent. Four weeks after intramuscular injection into mouse ischemic hindlimbs, genetically modified hMSCs substantially enhanced angiogenesis and limb salvage while reducing muscle degeneration and tissue fibrosis. These results indicate that stem cells engineered with biodegradable polymer nanoparticles may be therapeutic tools for vascularizing tissue constructs and treating ischemic disease.

Original Research: Oral Health Concerns of Female Breast Cancer Survivors on Adjuvant Endocrine Therapy.

BACKGROUND: Oral complications from cancer treatments are among the adverse effects breast cancer survivors can face. Yet such complications are often overlooked in cancer survivorship care. Many breast cancer survivors are receiving adjuvant endocrine therapy, but there is limited understanding of potential oral complications from this therapy. PURPOSE: This study aimed to compare aspects of oral health in female breast cancer survivors who were taking adjuvant endocrine therapy with those of survivors not taking such therapy. METHODS: National Health and Nutrition Examination Survey data collected from January 2009 through March 2020 were used for the analysis. Female adults ages 20 years and older who had been diagnosed with breast cancer were included. Linear regression and χ 2 analyses were conducted to examine aspects of oral health, using IBM SPSS Complex Samples software, version 27. RESULTS: In our sample of 423 female breast cancer survivors, 7.1% were taking tamoxifen, 7.8% were taking anastrozole, 4.3% were taking letrozole, and 2.9% were taking exemestane. Compared with the survivors not taking such therapy, a greater proportion of those taking it had decayed teeth, gum disease/problems, and were recommended for imminent dental care after oral health examination by dentists. The survivors who were not taking adjuvant endocrine therapy had more coronal cavities. CONCLUSIONS: Data analysis showed that female breast cancer survivors taking adjuvant endocrine therapy appear more likely to have oral health issues than those not taking such therapy. Improved awareness of these issues is critical. Assessment and management guidelines to address these oral health issues are needed by health care providers.

Novel succinoglycan dialdehyde/aminoethylcarbamoyl-ß-cyclodextrin hydrogels for pH-responsive delivery of hydrophobic drugs.

ß-Cyclodextrin cross-linked succinoglycan dialdehyde hydrogels was prepared for hydrophobic drug delivery. Succinoglycan dialdehyde (SGDA) was synthesized from sodium periodate oxidation of succinoglycan isolated from Sinorhizobium meliloti Rm1021. Aminoethylcarbamoyl-ß-cyclodextrin (ACD) was crosslinked with SGDA to form a succinoglycan dialdehyde/aminoethylcarbamoyl-ß-cyclodextrin (SGDA/ACD) hydrogels. The SGDA/ACD hydrogels exhibited a 65.7 % improvement in storage modulus (G') and a 5.7-fold higher compressive strain than the SGDA/poly(ethylene glycol) diamine (PEG) hydrogels as controls. A hardly soluble drug, baicalein was used for the drug loading and release properties of SGDA/ACD hydrogels. Baicalein was released about 98 % within 48 h at pH 7.4, but not completely released even after 48 h at pH 2.0. In addition, at pH 7.4, only about 56 % of the baicalein loaded on the SGDA/PEG hydrogels was released within 48 h, while about 98 % of the baicalein loaded on the SGDA/ACD hydrogels was released within 48 h. It indicates that ACD significantly improved the solubilization efficacy of the baicalein. In vitro testing of cell viability using HEK-293 cells also showed that the SGDA/ACD hydrogels were suitable for the cells. In conclusion, SGDA/ACD hydrogels significantly enhance the utilization of baicalein and provide potential applications in drug delivery systems for hardly soluble drugs.

Trends of conscious sedation in the Department of Pediatric Dentistry at the Dankook University Dental Hospital for 11 Years.

Background: Anxiety and fear in children's dental care are major impediments to successful dental care. High-quality dental treatment can be achieved using various behavioral control methods; however, conscious sedation using drugs can be used if behavioral control is difficult, owing to excessive fear and anxiety. This study aimed to examine the trends in conscious sedation implemented in pediatric dentistry at the Dankook University Dental Hospital over the past 11 years. Methods: This study included 6,438 cases of dental treatment under conscious sedation conducted over 11 years between January 2011 and December 2021 in the Department of Pediatric Dentistry at Dankook University Dental Hospital. Results: Over the past 11 years, the number of dental treatments under sedation has increased. In the case of inhalation sedation using nitrous oxide, the rate of increase was approximately twice every year, and the use of midazolam gradually decreased. The average age of children who underwent sedation was 5.11 years, and the rate of sedation treatment in children aged <4 years tended to decrease, while that of children aged >5 years tended to increase. This is related to the trend of changes in drugs used. In a sex-based survey, sedation treatment rate was higher in males than that in females. Conclusion: Appropriate selection of sedatives can reduce the frequency of general anesthesia and minimize complications through efficient and safe dental treatments. Trend analysis of sedation by year will help provide guidelines for the appropriate selection of sedation for dental treatment of children and patients with disability.

A novel analysis of the formation and resorption changes in dental hard tissue using longitudinal in vivo micro computed tomography.

This study was to investigate the new analysis manner of dental hard tissue change using in vivo micro-computed tomography (CT) in rat. Scanning, registration, analyzing, and presenting method to track longitudinal in vivo micro-CT data on dental hard tissues were validated in murine models: formative, dentin thickness after direct pulp capping with mineral trioxide aggregate; resorptive, development of apical bone rarefaction in apical periodontitis model. Serial in vivo micro-CT scans were analyzed through rigid-registration, active-contouring, deformable-registration, and motion vector-based quantitative analyses. The rate and direction of hard tissue formation after direct pulp capping was datafied by tracing coordinate shift of fiducial points on pulp chamber outline in formative model. The development of apical periodontitis could be monitored with voxel counts, and quantitatively analyzed in terms of lesion size, bone loss, and mineral density in resorptive model. This study supports the application of longitudinal in vivo micro-CT for resorptive- and formative-phase specific monitoring of dental hard tissues.

Zwitterionic polymer on silicone implants inhibits the bacteria-driven pathogenic mechanism and progress of breast implant-associated anaplastic large cell lymphoma.

Breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) occurs in the capsule surrounding breast implants. Malignant transformation of T cells by bacteria-driven chronic inflammation may be underlying BIA-ALCL mechanism. Here, we covalently grafted 2-methacryloyloxyethyl phosphorylcholine (MPC)-based polymers on a silicone surface and examined its effects against BIA-ALCL pathogenesis. MPC grafting strongly inhibited the adhesion of bacteria and bacteria-causing inflammation. Additionally, cancer T cell proliferation and capsule-derived fibroblast-cancer cell communication were effectively inhibited by MPC grafting. We further demonstrated the effect of MPC against the immune responses causing BIA-ALCL around human silicone implants in micro-pigs. Finally, we generated a xenograft anaplastic T cell lymphoma mouse model around the silicone implants and demonstrated that MPC grafting could effectively inhibit the lymphoma progression. This study is the first to show that bacteria-driven induction and progression of BIA-ALCL can be effectively inhibited by surface modification of implants. STATEMENT OF SIGNIFICANCE: Breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) is a major concern in the field of plastic and reconstructive surgery. In this study, we demonstrate strong inhibitory effect of zwitterionic polymer grafting on BIA-ALCL pathogenesis and progression, induced by bacterial infection and inflammation, both in vitro and in vivo. This study provides a molecular basis for the development of novel breast implants that can prevent various potential complications such as excessive capsular contracture, breast implant illness, and BIA-ALCL incidence, as well as for expanding the biomedical applications of zwitterionic polymers.

Development of a new universal adhesive containing CPNE7-derived peptide and its potential role in reducing postoperative sensitivity.

Post-operative sensitivity (POS) is the most common clinical dental complaint after tooth preparation and resin-based composite restoration. In our previous study, copine 7 (CPNE7) and CPNE7-derived peptide (CPNE7-DP) induced in vitro odontoblast differentiation and in vivo dentin formation. Here, we incorporated CPNE7-DP into All-Bond Universal (ABU) adhesive, developing ABU/CPNE7-DP. This study aimed to investigate the possibility of reducing POS using ABU/CPNE7-DP. We first determined the stability of CPNE7-DP under low pH. Furthermore, we evaluated its dentinal tubule penetration, in vitro odontogenic differentiation potential, in vivo tertiary dentin formation and its effects on bonding performance. CPNE7-DP was stable at pH 1.2, even lower than ABU's pH of 3.2. ABU/CPNE7-DP can penetrate dentinal tubules, stimulate odontoblast differentiation in vitro and generate tertiary dentin with tubular structure in vivo without interfering with bonding performance. Therefore, ABU/CPNE7-DP may serve as a novel bioactive adhesive for reducing POS.

Variation in adhesion of Streptococcus mutans and Porphyromonas gingivalis in saliva-derived biofilms on raw materials of orthodontic brackets.

Objective: To evaluate differences in the adhesion levels of the most common oral pathogens, Streptococcus mutans and Porphyromonas gingivalis , in human saliva-derived microcosm biofilms with respect to time and raw materials of orthodontic brackets. Methods: The samples were classified into three groups of bracket materials: 1) monocrystalline alumina ceramic (CR), 2) stainless steel metal (SS), and 3) polycarbonate plastic (PL), and a hydroxyapatite (HA) group was used to mimic the enamel surface. Saliva was collected from a healthy donor, and saliva-derived biofilms were grown on each sample. A real-time polymerase chain reaction was performed to quantitatively evaluate differences in the attachment levels of total bacteria, S. mutans and P. gingivalis at days 1 and 4. Results: Adhesion of S. mutans and P. gingivalis to CR and HA was higher than the other bracket materials (SS = PL < CR = HA). Total bacteria demonstrated higher adhesion to HA than to bracket materials, but no significant differences in adhesion were observed among the bracket materials (CR = SS = PL < HA). From days 1 to 4, the adhesion of P. gingivalis decreased, while that of S. mutans and total bacteria increased, regardless of material type. Conclusions: The higher adhesion of oral pathogens, such as S. mutans and P. gingivalis to CR suggests that the use of CR brackets possibly facilitates gingival inflammation and enamel decalcification during orthodontic treatment.

A Simplified Approach to Jaw-in-a-Day Using a Preassembled Prosthesis: Lowering the Barrier to Entry.

Fibula flap reconstruction with primary dental implant placement has been established as a successful procedure for composite mandibular defects. When using virtual surgical planning, these techniques typically require additional personnel and materials preoperatively and intraoperatively to fabricate occlusal-based guidance and prosthesis. The authors present a technique utilizing a custom-made implant-supported prosthesis completed before surgery that greatly reduces lead time and needed resources. The authors follow the established workflow of segmental mandibulectomy and fibula flap reconstruction using premanufactured cutting guides and placement of dental implants. Cylindrical holes along the implant axes are included in the printed surgical model provided by the guide manufacturer. Acrylic resin and abutments are added to the model to a positioning stent for use during surgery that does not require intraoperative modification before fibula inset. This ensures optimal position for facial esthetics and fixed dental rehabilitation. The presented technique uses printed models already provided by the guide manufacturer, reducing preparation time and requiring fewer personnel and materials intraoperatively. This is an approach to the jaw-in-a-day procedure with a lower barrier to entry that may be used by new craniofacial teams.

Relationship between rotational disc displacement of the temporomandibular joint and the dentoskeletal morphology.

OBJECTIVE: The purpose of this study was to evaluate the relationship between rotational disk displacement (DD) of the temporomandibular joint (TMJ) and the dentoskeletal morphology. METHODS: Women aged > 17 years were included in this study. Each subject had a primary complaint of malocclusion and underwent routine cephalometric examinations. They were divided into five groups according to the findings on sagittal and coronal magnetic resonance images of their TMJs: bilateral normal disk position, bilateral anterior DD with reduction (ADDR), bilateral rotational DD with reduction (RDDR), bilateral anterior DD without reduction (ADDNR), and bilateral rotational DD without reduction (RDDNR). Twenty-three cephalometric variables were analyzed, and the Kruskal-Wallis test was used to evaluate differences in the dentoskeletal morphology among the five groups. RESULTS: Patients with TMJ DD exhibited a hyperdivergent pattern with a retrognathic mandible, unlike those with a normal disk position. These specific skeletal characteristics were more severe in patients exhibiting DD without reduction than in those with reduction, regardless of the presence of rotational DD. Rotational DD significantly influenced horizontal and vertical skeletal patterns only in the stage of DD with reduction, and the mandible exhibited a more backward position and rotation in patients with RDDR than in those with ADDR. However, there were no significant dentoskeletal differences between ADDNR and RDDNR. CONCLUSIONS: The results of this study suggest that rotational DD of TMJ plays an important role in the dentoskeletal morphology, particularly in patients showing DD with reduction.

Expansion Microscopy with a Thermally Adjustable Expansion Factor Using Thermoresponsive Biospecimen-Hydrogel Hybrids.

Expansion microscopy (ExM) is a technique in which swellable hydrogel-embedded biological samples are physically expanded to effectively increase imaging resolution. Here, we develop thermoresponsive reversible ExM (T-RevExM), in which the expansion factor can be thermally adjusted in a reversible manner. In this method, samples are embedded in thermoresponsive hydrogels and partially digested to allow for reversible swelling of the sample-gel hybrid in a temperature-dependent manner. We first synthesized hydrogels exhibiting lower critical solution temperature (LCST)- and upper critical solution temperature (UCST)-phase transition properties with N-alkyl acrylamide or sulfobetaine monomers, respectively. We then formed covalent hybrids between the LCST or UCST hydrogel and biomolecules across the cultured cells and tissues. The resulting hybrid could be reversibly swelled or deswelled in a temperature-dependent manner, with LCST- and UCST-based hybrids negatively and positively responding to the increase in temperature (termed thermonegative RevExM and thermopositive RevExM, respectively). We further showed reliable imaging of both unexpanded and expanded cells and tissues and demonstrated minimal distortions from the original sample using conventional confocal microscopy. Thus, T-RevExM enables easy adjustment of the size of biological samples and therefore the effective magnification and resolution of the sample, simply by changing the sample temperature.

Development of poly(D,L-lactic-co-glycolic acid) films coated with biomembrane-mimicking polymers for anti-adhesion activity.

A physical barrier is one of the most effective strategies to alleviate excessive postoperative adhesion (POA) between tissues at an injury site. To overcome the limitations of current polymeric film-type physical barriers, we suggest a film of poly(lactic-co-glycolic acid) (PLGA) that is non-covalently coated with poly(2-methacryloyloxyethyl phosphorylcholine (MPC)-co-n-butyl methacrylate (BMA)) (PMB). While maintaining the degradability and mechanical properties of PLGA, the PMB coating introduces strong anti-adhesive properties to the film by forming a zwitterionic MPC-based surface through the hydrophobic interactions between BMA moieties and PLGA. Compared to SurgiWrap®, the commercially available poly(lactic acid)-based anti-adhesive film against POA, the PMB-coated PLGA film is much more inhibitory against protein adsorption and fibroblast adhesion, processes that are crucial to the POA process. PMB coating also inhibits the expression of fibronectin containing extra domain A (FN-EDA), α-smooth muscle actin (α-SMA), and collagen type IV alpha 2 (COL4A2), which are marker genes and proteins involved in fibroblast activation and excessive fibrosis during POA. Such inhibitory activities are clearly observed in a 3-dimensional culture of fibroblasts within a collagen matrix, which mimics the in vivo environment of an injury site, as well as in a 2-dimensional culture. The kinetics and the stability of the PMB coating suggest potential future clinical use to coat PLGA films to create a film-type anti-adhesion barrier that overcomes the limitations of current products.

Effect of a Er, Cr:YSGG laser and a Er:YAG laser treatment on oral biofilm-contaminated titanium.

OBJECTIVE: Implant surface decontamination is a challenging procedure for therapy of peri-implant disease. This study aimed to compare the effectiveness of decontamination on oral biofilm-contaminated titanium surfaces in Er:YAG laser, Er, Cr:YSGG laser, and plastic curette. METHODOLOGY: For oral biofilms formation, six participants wore an acrylic splint with eight titanium discs in the maxillary arch for 72 hours. A total of 48 contaminated discs were distributed among four groups: untreated control; decontamination with plastic curettes; Er, Cr:YSGG laser; and Er:YAG laser irradiation. Complete plaque removal was estimated using naked-eye and the time taken was recorded; the residual plaque area was measured and the morphological alteration of the specimen surface was observed by scanning electron microscopy. The total bacterial load and the viability of adherent bacteria were quantified by live or dead cell labeling with fluorescence microscopy. RESULTS: The mean treatment time significantly decreased based on the treatment used in the following order: Er:YAG, Er, Cr:YSGG laser, and plastic curettes (234.9±25.4 sec, 156.1±12.7 sec, and 126.4±18.6 sec, P=0.000). The mean RPA in the Er, Cr:YSGG laser group (7.0±2.5%) was lower than Er:YAG and plastic curettes groups (10.3±2.4%, 12.3±3.6%, p=0.023). The viable bacteria on the titanium surface after Er, Cr:YSGG laser irradiation was significantly lower compared to the decontamination with plastic curette (P=0.05) but it was not significantly different from the Er:YAG laser irradiation. CONCLUSION: We found that Er:YAG laser and Er, Cr:YSGG laser irradiation were effective methods for decontaminations without surface alterations.

Neurotoxic potential of polystyrene nanoplastics in primary cells originating from mouse brain.

Polystyrene (PS) and chemically modified compounds in the PS family have long been used in commercial and industrial fields. However, it is poorly understood whether nanoscale-PS microplastic or PS nanoplastic exposure leads to perturbations in fundamental cellular functions, such as proliferation, differentiation, and apoptosis. Herein, we cultured three types of primary cells, including mouse embryonic fibroblasts (MEFs), mixed neuronal cells isolated from embryonic cortex, and cortical astrocytes, and investigated the effects of their exposure to PS nanoplastics with a 100 nm diameter. Although PS nanoplastic exposure did not affect the viability of MEFs or astrocytes, it significantly reduced the viability of mixed neuronal cells. Consistent with the observed effect on cellular viability, levels of the apoptosis marker, cleaved caspase-3, were elevated exclusively in mixed neuronal cells. To investigate whether cells uptake PS nanoplastics into the cytoplasm, we exposed MEFs and neurons to fluorescent PS latex beads and monitored fluorescence over time. We found that PS nanoplastics were deposited and accumulated in the cytoplasm in a concentration-dependent manner. Although astrocytes were not apoptotic upon exposure to PS nanoplastics, they underwent reactive astrocytosis, with increased levels of lipocalin-2 and proinflammatory cytokines. Therefore, our findings suggested that the vulnerability of cells to the deposition and accumulation of PS nanoplastics in the cytoplasm was dependent on cell type. Furthermore, based on our data from primary cells originating from mouse brains, we suggest that reactive astrocytosis may contribute to the neuronal apoptosis seen in defective neurons with PS nanoplastics accumulated in the cell body.

Efficient reduction of fibrous capsule formation around silicone breast implants densely grafted with 2-methacryloyloxyethyl phosphorylcholine (MPC) polymers by heat-induced polymerization.

Implants based on silicone elastomers, polydimethylsiloxane (PDMS), have been widely used for breast augmentation and reconstruction, but excessive foreign body reactions around implants often cause serious side effects such as capsular contracture. In our previous study, we covalently grafted 2-methacryloyloxyethyl phosphorylcholine (MPC)-based polymers on the surface of PDMS blocks by UV-induced polymerization and showed effective reduction of capsular formation around the MPC-grafted PDMS in rats. In the present study, we examined the efficacy of heat-induced polymerization of MPC grafting on silicone breast implants intended for humans, and analyzed the in vivo inhibitory effect against capsular formation and inflammation in pigs, which are closely related to humans in terms of epidermal structures and fibrotic processes. The heat-induced polymerization provided a thicker MPC-grafted surface and was more effective than UV-induced polymerization for the grafting of complex shaped non-transparent implants. After 24-week implantation in the submuscular pockets of Yorkshire pigs, the heat-induced MPC-grafted breast implants showed 45% smaller capsular thickness and 20-30% lower levels of inflammatory markers such as myeloperoxidase (MPO), transforming growth factor-ß (TGF-ß), and α-smooth muscle actin (α-SMA) in surrounding tissues compared to non-grafted implants. This study provides important information for future clinical trials of MPC-grafted silicone implants.