Quaternary Polymer Electrolytes Containing an Ionic Liquid and a Ceramic Filler.

In this work, the individual and combined effects of an ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide and ceramic filler silicon dioxide on the thermal and electrochemical properties of poly(ethylene oxide) electrolytes have been investigated. The electrolyte containing both components has the lowest glass transition (-60 °C) and melting temperatures (27 °C), the highest conductivity at any investigated temperature, and the highest limiting current density (at 40 °C). This solid polymer electrolyte also exhibits the best long-term cycling performance in Li/LiFePO4 cells.

Precursor polymers for the carbon coating of Au@ZnO multipods for application as active material in lithium-ion batteries.

The synthesis of statistical and block copolymers based on polyacrylonitrile, as a source for carbonaceous materials, and thiol-containing repeating units as inorganic nanoparticle anchoring groups is reported. These polymers are used to coat Au@ZnO multipod heteroparticles with polymer brushes. IR spectroscopy and transmission electron microscopy prove the successful binding of the polymer onto the inorganic nanostructures. Thermogravimetric analysis is applied to compare the binding ability of the block and statistical copolymers. Subsequently, the polymer coating is transformed into a carbonaceous (partially graphitic) coating by pyrolysis. The obtained carbon coating is characterized by Raman spectroscopy and energy-dispersive X-ray (EDX) spectroscopy. The benefit of the conformal carbon coating of the Au@ZnO multipods regarding its application as lithium-ion anode material is revealed by performing galvanostatic cycling, showing a highly enhanced and stabilized electrochemical performance of the carbon-coated particles (still 831 mAh g(-1) after 150 cycles) with respect to the uncoated ones (only 353 mAh g(-1) after 10 cycles).

Polyacrylonitrile block copolymers for the preparation of a thin carbon coating around TiO2 nanorods for advanced lithium-ion batteries.

Herein, a new method for the realization of a thin and homogenous carbonaceous particle coating, made by carbonizing RAFT polymerization derived block copolymers anchored on anatase TiO2 nanorods, is presented. These block copolymers consist of a short anchor block (based on dopamine) and a long, easily graphitizable block of polyacrylonitrile. The grafting of such block copolymers to TiO2 nanorods creates a polymer shell, which can be visualized by atomic force microscopy (AFM). Thermal treatment at 700 °C converts the polyacrylonitrile block to partially graphitic structures (as determined by Raman spectroscopy), establishing a thin carbon coating (as determined by transmission electron microscopy, TEM, analysis). The carbon-coated TiO2 nanorods show improved electrochemical performance in terms of achievable specific capacity and, particularly, long-term cycling stability by reducing the average capacity fading per cycle from 0.252 mAh g(-1) to only 0.075 mAh g(-1) .

Molecular Insight into Microstructural and Dynamical Heterogeneities in Magnesium Ionic Liquid Electrolytes.

Ionic liquids (ILs) are promising designer solvents for multivalent electrolytes, enabling the modulation of molecular-level interactions of solvate species. The molecular mechanism of multivalent-ion clustering and its impact on electrolytes properties is far less studied than that of ion pairs. Herein, we explore the effect of ion clusters on the transport and electrochemical behavior of IL-based electrolytes for Mg batteries. Simulation and small-angle X-ray scattering results indicate that ILs with higher denticity effectively suppress ion agglomeration and parasitic reactions of the Mg electrolytes. Although ion clustering reduces the diffusivity of Mg2+, the Coulombic efficiency for the reversible Mg deposition/stripping process is improved, highlighting the importance of microstructural and dynamical heterogeneities in the rational design of enhanced multivalent electrolytes.

Influence of Polymer Backbone Fluorination on the Electrochemical Behavior of Single-Ion Conducting Multiblock Copolymer Electrolytes.

The presence of fluorine, especially in the electrolyte, frequently has a beneficial effect on the performance of lithium batteries owing to, for instance, the stabilization of the interfaces and interphases with the positive and negative electrodes. However, the presence of fluorine is also associated with reduced recyclability and low biodegradability. Herein, we present a single-ion conducting multiblock copolymer electrolyte comprising a fluorine-free backbone and compare it with the fluorinated analogue reported earlier. Following a comprehensive physicochemical and electrochemical characterization of the copolymer with the fluorine-free backbone, the focus of the comparison with the fluorinated analogue was particularly on the electrochemical stability toward oxidation and reduction as well as the reactions occurring at the interface with the lithium-metal electrode. To deconvolute the impact of the fluorine in the ionic side chain and the copolymer backbone, suitable model compounds were identified and studied experimentally and theoretically. The results show that the absence of fluorine in the backbone has little impact on the basic electrochemical properties, such as the ionic conductivity, but severely affects the electrochemical stability and interfacial stability. The results highlight the need for a very careful design of the whole polymer for each desired application, essentially, just like for liquid electrolytes.

Partially Oxidized Cellulose grafted with Polyethylene Glycol mono-Methyl Ether (m-PEG) as Electrolyte Material for Lithium Polymer Battery.

Herein, a novel cellulose derivative has been synthesized and investigated as a nature-derived solid polymer electrolyte for lithium batteries. Cellulose is oxidized in a two-step process to dicarboxylic acid cellulose to allow for grafting low molecular weight poly(ethylene glycol) monomethyl ether (550 g mol-1) via Fischer-Speier esterification at the thus obtained carboxyl groups. The chemical structure of the synthesized materials is confirmed by Fourier-transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy as well as X-ray diffraction. Incorporating lithium bis(trifluoromethane-sulfonyl)imide (LiTFSI) as conducting salt and N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (Pyr14TFSI) ionic liquid as plasticizer results in the realization of an amorphous and solvent-free solid polymer electrolyte. These electrolyte membranes are characterized by high thermal and electrochemical stability and ionic conductivities of about 1×10-5 S cm-1 at 20 °C and 2.5×10-4 S cm-1 at 80 °C, which enables very stable lithium stripping and plating for more than 800 h.

Pectin, Hemicellulose, or Lignin? Impact of the Biowaste Source on the Performance of Hard Carbons for Sodium-Ion Batteries.

Hard carbons are currently the most widely used negative electrode materials in Na-ion batteries. This is due to their promising electrochemical performance with capacities of 200-300 mAh g-1 and stable long-term cycling. However, an abundant and cheap carbon source is necessary in order to comply with the low-cost philosophy of Na-ion technology. Many biological or waste materials have been used to synthesize hard carbons but the impact of the precursors on the final properties of the anode material is not fully understood. In this study the impact of the biomass source on the structural and electrochemical properties of hard carbons is unraveled by using different, representative types of biomass as examples. The systematic structural and electrochemical investigation of hard carbons derived from different sources-namely corncobs, peanut shells, and waste apples, which are representative of hemicellulose-, lignin- and pectin-rich biomass, respectively-enables understanding and interlinking of the structural and electrochemical properties.

Composite poly(ethylene oxide) electrolytes plasticized by N-alkyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide for lithium batteries.

We report a new class of quaternary polymer electrolyte membranes that comprise poly(ethylene oxide) (PEO), lithium trifluoromethanesulfonylimide (LiTFSI), N-alkyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PyrA,4 TFSI) as an ionic liquid, and a SiO2 filler. The results of differential scanning calorimetry indicate that the addition of SiO2 and different ionic liquids induces a decrease in the PEO melting enthalpy, which thereby increases the ionic conductivity and the Li transference number. The electrochemical stability is proved by using impedance spectroscopy and cyclic voltammetry. Galvanostatic cycling of Li/LiFePO4 cells, which comprise the quaternary polymer electrolytes, revealed their superior performance compared to conventional PEO-Li salt electrolytes. In the course of this investigation, a synergistic effect of the combined ionic liquid-ceramic filler modification could be proved at temperatures close to 50 °C.

Complicaciones de terapias endodónticas. La micosis de los senos paranasales. Diagnóstico y terapia / Complications of endodontic therapies. The paranasal sinuses mycosis. Diagnosis and therapy

Se conoce la existencia de la aspergillosis desde hace más de un siglo. Su incidencia parece ir aumentado con el paso del tiempo. Si bien una de las razones para este aumento es una mejor documentación de los casos, al parecer existen ciertos factores y enfermedades que contribuyen a la formación de esta infección. Sin embargo, llama la atención el hecho de que principalmente afecta a los individuos por lo demás sanos. Este trabajo abarca una revisión bibliográfica de los diversos tipos de micosis, así como de los tratamientos usados en cada uno de sus casos