Edible Bite Force Sensor: A Novel Approach to Measuring Bite Force in Biomedical and Dental Applications.

BACKGROUND Measurement of bite force plays a crucial role in assessment of the masticatory system. With a growing interest in detecting occlusal irregularities, bite force sensors have garnered attention in the biomedical field. This study aimed to introduce a hydrogel bite force sensor, based on hydroxyethyl-cellulose-fructose-water (HEC-F-water), for premolar and molar teeth, and to evaluate it using optical profilometry, infrared spectroscopy (FTIR), and Instron Tension testing system, with 2.5 cm (1 inch) margins at top, bottom, right, and left. MATERIAL AND METHODS We fabricated 20 HEC-F-water hydrogel samples sized with surface of 1×1 cm, with 2 different widths - 1 mm and 5 mm. The samples were characterized using optical profilometry and FTIR and their electrical characteristics were determined using an impedance analyzer. Aluminum (Al) electrodes, fabricated using Cutting Plotter, were used to form a HEC-F-water-based transducer, which was used for bite force sensing. The Instron tensile testing system was employed, utilizing 3D printed models of the upper and lower jaw, to simulate biting. Forces in the range between 40 N and 540 N were exerted upon the transducer, and the output change in the electrical signal was measured. RESULTS The study determined the transfer function between bite force and capacitance. The fabricated sensor exhibited a sensitivity of 3.98 pF/N, an input range of 500 N, output range of 2 nF, and accuracy of 95.9%. CONCLUSIONS This study introduces an edible bite force sensor employing an edible hydrogel as a dielectric, presenting a novel avenue in the development of edible sensorics in dentistry.

Sex and age determination of human mandible using anthropological parameters and TCI and Kvaal methods: study of a Serbian medieval sample.

PURPOSE: The aim of the study was to test the efficacy, reliability, and applicability of the Kvaal and Tooth Coronal Index (TCI) age determination techniques, and then to compare them with each other, as well as with the conventional anthropological age and sex determination techniques. METHODS: The analyzed material originates from the medieval necropolis of the Vinca-Belo brdo site. During the research, 60 periapical (PA) and 30 orthopantomographic (OPT) images were analyzed. On each analyzed tooth, age assessment was performed using both TCI and Kvaal techniques. The obtained values of dental estimated age were compared with age estimated by anthropological analysis, and the deviations between the estimated and chronological age were analyzed in relation to the assessment technique, type of dental radiograph, tooth group, sex, and age. RESULTS: The mean error between TCI and the osteological method was 8.44 (SD = 7.56, Min = 0.169, Max = 36.4) and between Kvaal and the osteological method was 7.71 (SD = 5.57, Min = 0.133, Max = 26.7). The average value of age recorded by TCI method was 32.5 years and by Kvaal method was 34.7 years. There was no statistically significant difference based on the two radiographic methods, gender, individual teeth, or tooth group pairs. There was a statistically significant positive correlation between age and the error present. CONCLUSION: Gender determination based only on the mandible has a high correlation with the anthropological gender determination. The Kvaal method and the TCI method have proven their efficiency, reliability, and applicability. Significant correlation has been observed between dental and anthropological age and sex determination methods.

Efficacy of pastes containing CPP-ACP and CPP-ACFP in patients with Sjögren's syndrome.

OBJECTIVES: The purpose of this study was to evaluate efficacy of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and casein phosphopeptide-amorphous calcium fluoride phosphate (CPP-ACFP) containing pastes among individuals with Sjögren's syndrome (SS). MATERIALS AND METHODS: Thirty patients were randomised into three groups: CPP-ACP, CPP-ACFP, and 0.05 % NaF to be used two times a day during a 28-day experimental period. Saliva was analysed for flow rate, pH, buffering capacity and mineral concentrations. Dental plaque was examined for pH. Following the formation of artificial carious lesion, participants wore enamel slabs for an in situ remineralisation study. Remineralisation potential was examined using scanning electron microscope (SEM) and energy dispersive spectroscopic (EDS) technique. SE microphotographs were subsequently analysed for area, diameter, perimeter, roundness and the number of enamel defects and percentage of tooth surface affected by defects. RESULTS: At the end of the experimental period, a slight increase of salivary pH could have been observed. No differences in mineral composition of saliva were noted. The use of CPP-ACP and CPP-ACFP contributed to a significant rise of plaque pH. Image analysis revealed excessive reduction of defects' dimensions in the three experimental groups, and a decrease of the number of enamel defects in the CPP-ACP and CPP-ACFP groups. The EDS analysis did not show differences in Ca/P, Ca/O and P/O ratios in any of the treatment groups. CONCLUSION: CPP-ACP and CPP-ACFP hold promise as remineralising agents for patients with SS. CLINICAL RELEVANCE: Pastes containing CPP-ACP/CPP-ACFP show enhanced remineralisation potential compared with NaF mouthrinse in patients with SS.

Influence of casein phosphopeptide-amorphous calcium phosphate on the surface topography and composition of nickel-titanium archwires during orthodontic treatment with fixed appliances.

PURPOSE: To investigate the surface topography and nickel content of nickel-titanium (NiTi) archwires exposed to either routine oral hygiene or a prophylactic regimen with casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) during orthodontic treatment. METHODS: This in vivo study involved 40 orthodontic patients with fixed appliances, who were randomly assigned to either a routine oral hygiene group or a CPP-ACP supplementary regimen group. Twenty new NiTi archwires served as controls. All archwires underwent scanning electron microscopy and energy-dispersive spectroscopy to evaluate their surface topography and elemental composition. The nickel content was quantified as a percentage of total weight and the Ni/Ti ratio, and statistical comparisons were made using pairwise tests. RESULTS: Wires exposed to fluoride toothpaste showed signs of pitting corrosion, deep grooves, and corrosion debris. In contrast, wires exposed to supplementary CPP-ACP exhibited smooth surface areas interspersed with microdefects and deposits. Statistically significant differences in nickel content were found between the new and retrieved archwires, as well as between wires exposed to routine oral hygiene and CPP-ACP (P < 0.001). The archwires exposed to CPP-ACP had the lowest nickel content (P < 0.001). CONCLUSION: The use of CPP-ACP holds promise for application as a safe anticariogenic agent with possible protective properties during orthodontic treatment.

Analysis of Covarine Particle in Toothpaste Through Microfluidic Simulation, Experimental Validation, and Electrical Impedance Spectroscopy.

Covarine, copper phthalocyanine, a novel tooth whitening ingredient, has been incorporated into various toothpaste formulations using diverse technologies such as larger flakes, two-phase pastes, and microbeads. In this study, we investigated the behavior of covarine microbeads (200 µm) in Colgate advanced white toothpaste when mixed with artificial and real saliva. Our analysis utilized a custom-designed microfluidic mixer with 400 µm wide channels arranged in serpentine patterns, featuring a Y-shaped design for saliva and toothpaste flow. The mixer, fabricated using stereolithography 3D printing technology, incorporated a flexible transparent resin (Formlabs' Flexible 80A resin) and PMMA layers. COMSOL simulations were performed by utilizing parameters extracted from toothpaste and saliva datasheets, supplemented by laboratory measurements, to enhance simulation accuracy. Experimental assessments encompassing the behavior of covarine particles were conducted using an optical profilometer. Viscosity tests and electrical impedance spectroscopy employing recently developed all-carbon electrodes were employed to analyze different toothpaste dilutions. The integration of experimental data from microfluidic chips with computational simulations offers thorough insights into the interactions of covarine particles with saliva and the formation of microfilms on enamel surfaces.

Enamel incremental markings in the deciduous teeth of children from the Early Bronze and modern ages.

OBJECTIVE: The purpose of this study was to determine whether children from Early Bronze Age and modern populations differ in terms of the width of the neonatal line (NNL) and the occurrence of accentuated lines in enamel. DESIGN: The sample (N = 59) consisted of two groups: 29 deciduous teeth removed from the jaws of children (dental age range from 1 to 10 years) whose skeletal remains were found in Early Bronze archaeological graves in Mokrin Serbia, and 30 present-day exfoliated deciduous teeth from 6 to 11 year old children. Mothers, whose children participated in this study, provided information regarding their health during pregnancy. The analysis was carried out on ground sections with a scanning electron microscope. Two clinicians measured the width of the NNL and counted the accentuated lines in the enamel. RESULTS: There was a statistically significant difference between the children from the two groups regarding the width of the NNL. The width of the NNL between children whose mothers were healthy and diagnosed with gestational diabetes was significantly different. Most subjects did not have accentuated lines in the prenatal enamel, regardless of whether they were from the Bronze or Modern age. Accentuated lines were dominantly found in the postnatal enamel of the children from the Early Bronze age. CONCLUSIONS: This study is the first to investigate the width of the NNL in teeth of Maros children and Serbian children from the modern age. The wider NNL of children from the Early Bronze age indicates the possibility that they have experienced more overall stress in perinatal life.

The Participation of Pediatric Dentists in Oral Health Promotion and Education in Serbia.

Objectives: To identify the involvement of Serbian paediatric dentists in oral health promotion and education, and to propose further actions for the improvement of these activities. Methods: This is an analysis of data collected by a cross-sectional, questionnaire-based survey of 445 dentists involved in the provision of dental health services to children at the primary healthcare level. We explored dentists' involvement in oral health education and promotion and the cooperation with other health professionals at the healthcare centre and the community level as well as their attitudes towards the importance of some factors influencing their work. Results: Dentists estimate their cooperation with different services with ratings higher than 3 on the scale of 1 to 5. They reported the highest satisfaction in cooperation with paediatric services for preschool and schoolchildren (4.0±1.0). At the community level, they reported excellent cooperation with kindergartens (4.4±0.8), while collaboration with Roma health mediators (3.14±1.34) and nongovernmental organizations (2.5±1.4) received lower ratings. According to the average rating (4.7±0.7), dentists perceive the motivation of patients and/or their guardians for keeping good oral health as the factor with the highest importance for the quality of interventions they provide. Conclusions: Dentists involved in the provision of dental healthcare for children and adolescents in primary healthcare centres in Serbia participate in different oral healthcare education and promotion activities in the community, and highlight the importance of strengthening cooperation with healthcare and other professionals and services aimed at vulnerable population groups, both within the health sector and nongovernmental organizations.

Toothpaste ingestion-evaluating the problem and ensuring safety: systematic review and meta-analysis.

This systematic review and meta-analysis aimed to evaluate the ingestion of toothpaste and its sequelae. The study adhered to the PRISMA guidelines and was registered in the PROSPERO database. A comprehensive search strategy was conducted across multiple databases, resulting in the inclusion of 18 relevant publications. Eligible studies encompassed various designs and included both children and adults as the study population. Data extraction was carried out systematically, and relevant information on study characteristics, interventions, and outcomes were collected. The assessment of bias was performed using the Joanna Briggs Institute's Critical Appraisal Tools showing variations of bias among the included studies. The overall risk of systemic toxicity was found to be low, and no severe or life-threatening events were reported in the included studies. Furthermore, some toothpaste formulations containing higher concentrations of fluoride were associated with an increased risk of dental fluorosis. These findings have several implications for practice and policy. Healthcare providers and dental professionals should emphasize the importance of promoting safe toothpaste use, especially in vulnerable populations such as young children who are more prone to accidental ingestion. Public health campaigns and educational initiatives should aim to raise awareness about appropriate toothpaste usage and the potential risks. In addition, toothpaste manufacturers and regulatory bodies should consider revising guidelines and regulations to ensure the safety of oral care products, including the appropriate concentration of active ingredients. Future research should focus on investigating the long-term effects of toothpaste ingestion, exploring potential interactions between different active ingredients, and evaluating the efficacy of current preventive measures.

A novel microfluidic compact disc to investigate electrochemical property changes between artificial and real salivary samples mixed with mouthwashes using electrical impedance analysis.

Diagnosing oral diseases at an early stage may lead to better preventive treatments, thus reducing treatment burden and costs. This paper introduces a systematic design of a microfluidic compact disc (CD) consisting of six unique chambers that run simultaneously from sample loading, holding, mixing and analysis. In this study, the electrochemical property changes between real saliva and artificial saliva mixed with three different types of mouthwashes (i.e. chlorhexidine-, fluoride- and essential oil (Listerine)-based mouthwashes) were investigated using electrical impedance analysis. Given the diversity and complexity of patient's salivary samples, we investigated the electrochemical impedance property of healthy real saliva mixed with different types of mouthwashes to understand the different electrochemical property which could be a foundation for diagnosis and monitoring of oral diseases. On the other hand, electrochemical impedance property of artificial saliva, a commonly used moisturizing agent and lubricant for the treatment of xerostomia or dry mouth syndrome was also studied. The findings indicate that artificial saliva and fluoride-based mouthwash showed higher conductance values compared to real saliva and two other different types of mouthwashes. The ability of our new microfluidic CD platform to perform multiplex processes and detection of electrochemical property of different types of saliva and mouthwashes is a fundamental concept for future research on salivary theranostics using point-of-care microfluidic CD platform.

Oral micro-electronic platform for temperature and humidity monitoring.

Intraoral theranostics, the integration of diagnostics and therapeutics within the oral cavity, is gaining significant traction. This pioneering approach primarily addresses issues like xerostomia (dry mouth), commonly resulting from cancer treatment, with a specific focus on monitoring temperature and humidity. This paper introduces the innovative Intra-Oral Portable Micro-Electronic (IOPM) fluidic theranostic device platform. It leverages conventional dental spoons by incorporating advanced sensors for precise measurements of oral temperature and humidity. Personalization options include a microfluidic chip and a tooth model, enabling targeted delivery of therapeutic agents to optimize treatment outcomes. The electronic control system simplifies the administration of fluid dosages, intelligently adjusted based on real-time oral cavity temperature and humidity readings. Rigorous experimental evaluations validate the platform's precision in delivering fluid volumes at predefined intervals. This platform represents a transformative advancement for individuals contending with oral health challenges such as xerostomia (dry mouth). Furthermore, it has the potential to elevate oral healthcare standards by providing advanced diagnostics and tailored therapeutic solutions, benefiting both patients and dental professionals alike.

The Measurement of Contact Angle, pH, and Conductivity of Artificial Saliva and Mouthwashes on Enamel, Glass-Ionomer, and Composite Dental Materials.

The aim of this study was to tackle the topic of appropriate recommendations for artificial-saliva and mouthwash usage. The contact angle, pH, and conductivity of two artificial saliva solutions, four mouthwashes, and their mixtures on enamel, glass-ionomer, and composite dental materials were measured. The measurements were conducted with a MATLAB algorithm to minimize human error. The obtained values for the contact angle were in the range from 7.98° to 52.6°, and they showed completely nonlinear and nonuniform behavior for all investigated liquids and on all investigated substrates. Results reveal statistically significant differences among all tested liquids on all investigated substrates (p < 0.05). pH values ranged from 1.54 to 7.01. A wide range of conductivity values were observed, from 1205µS/cm in the saliva-stimulating solution to 6679 mS/cm in the artificial saliva. Spearman's test showed a moderate positive correlation between the pH and conductivity of the tested fluids (R = 0.7108). A comparison of the data obtained using Image J software and the MATLAB algorithm showed consistency, not exceeding 5% error. When an experiment uses human material and bioactive materials THAT are used in biomedicine as substrates, an additional definition of protocols is highly recommended for future research on this topic.

Performance Evaluation of Dental Flosses Pre- and Post-Utilization.

Dental floss is an oral hygiene product used to remove food and plaque in places where toothbrushes cannot reach. Even though over the years since its introduction some research in suitable materials has been performed, thread cracking and wear can still compromise efficiency. The aim of this study was to examine the morphological properties of four different commercially available dental floss types before and after use. For that purpose, scanning electron microscopy and optical microscopy were used to assess the flosses before and after use, and tension testing was performed to determine any degradation in the floss performance after utilization. The analyzed floss samples verify the hypothesis that the properties of the floss need to be known in depth, before recommending a specific type to patients for daily use in all clinical indications.

Oral Health in 12- and 15-Year-Old Children in Serbia: A National Pathfinder Study.

The aim of the paper is to present the oral health profile of 12- and 15-year-old schoolchildren in Serbia. Basic Methods for Oral Health Surveys of the WHO were implemented to record: Decayed, Missing, and Filled Teeth/Surfaces Index (DMFT/DMFS), gingival bleeding, enamel fluorosis and other structural anomalies, dental erosion, dental trauma, and oral mucosal lesions. In addition, Silness and Löe plaque index and orthodontic status were assessed. A total of 36% of 12-year-olds and 22% of 15-year-olds in Serbia were caries-free. The mean DMFT was 2.32 ± 2.69 for 12-year-olds and 4.09 ± 3.81 for 15-year-olds. DMFT was made up largely by the decayed component. Gingival bleeding was present in 26% of examined 12-year-old and 18% of 15-year-old children. Dental plaque was observed in 63% of both 12- and 15-year-olds. Fluorosis, structural anomalies, dental erosion, dental trauma, and oral mucosal lesion were rarely detected. Low prevalence of malocclusions was found. Oral disease is still a common public health problem among schoolchildren in Serbia. A significant increase in the prevalence of caries disease between 12- and 15-year-old groups implies that preventive care for adolescents requires special attention. Corrective actions and reforms to the current school-based oral health prevention program are needed to further improve oral health in Serbian children.

The impact of fissure depth and enamel conditioning protocols on glass-ionomer and resin-based fissure sealant penetration.

PURPOSE: To evaluate the effect that fissure depth and enamel conditioning protocols have on penetration abilities of resin-based and glass-ionomer fissure sealants. MATERIALS AND METHODS: Fifty extracted human molars were randomized into 10 experimental groups. Conditioning was performed as follows: groups I and VI, no pretreatment; groups II and VII, 10% polyacrylic acid and 37% phosphoric acid, respectively; groups III and VIII, self-etching adhesive; groups IV and IX, Er:YAG laser; groups V and X, Er:YAG laser/10% polyacrylic acid and laser/37% phosphoric acid, respectively. In groups I to V, teeth were sealed with a glass-ionomer material, and in groups VI to X a resin-based sealant was used. The sealed teeth were sectioned and the penetration ability was evaluated using scanning electron microscopy (SEM). RESULTS: Pretreatment with a suitable acid resulted in superior penetration of glass-ionomer and resin-based sealant when compared with other conditioning protocols (p < 0.0001), except for the teeth treated with both Er:YAG laser and acid. Both conditioning protocol and fissure depth significantly affected the sealant penetration (p < 0.0001), but fissure depth had a greater impact on fissure penetration than did conditioning protocol. CONCLUSION: Resin-based and glass-ionomer sealing materials show similar potential for pit-and-fissure penetration. Penetration of a fissure sealant is largely influenced by the fissure depth. Regarding the conditioning protocol, a pretreatment with a suitable acid is essential to obtain an adequate penetration of a sealing material.

Meta-Analysis of In-Vitro Bonding of Glass-Ionomer Restorative Materials to Primary Teeth.

Restoration of primary teeth is among the main clinical applications of glass-ionomer cements (GIC). The aim of the study was to review and summarize existing evidence of in vitro bond strength of glass-ionomer (GI) restoratives to enamel and dentin of primary teeth. A literature search was performed in PubMed/Medline, Scopus, Web of Science, Cochrane, and Google Scholar databases to identify studies published until April 2021. The search strategy was: ("glass") and ("ionomer") and ("primary" or "deciduous") and ("bond" or "tensile" or "shear"). Two researchers independently retrieved articles that reported on the bond strength of GIC to primary dentin and/or enamel. The meta-analysis was performed to compare the bond strength values of conventional (C) GIC and resin-modified (RM) GIC to different substrates. From 831 potentially eligible articles, 30 were selected for the full-text examination, and 7 were included in the analysis. Studies were rated at high (3), medium (3), and low (1) risk of bias. RM-GIC showed higher bond strength to primary enamel and dentin compared to the C-GIC. Meta-analysis of in vitro studies, evaluating bonding properties of GI restoratives to primary teeth, suggests the superior performance of RM-GIC. However, there is a lack of studies that examine the properties of novel GI formulations.

New perspectives on cytoskeletal dysregulation and mitochondrial mislocalization in amyotrophic lateral sclerosis.

Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disease characterized by selective, early degeneration of motor neurons in the brain and spinal cord. Motor neurons have long axonal projections, which rely on the integrity of neuronal cytoskeleton and mitochondria to regulate energy requirements for maintaining axonal stability, anterograde and retrograde transport, and signaling between neurons. The formation of protein aggregates which contain cytoskeletal proteins, and mitochondrial dysfunction both have devastating effects on the function of neurons and are shared pathological features across several neurodegenerative conditions, including ALS, Alzheimer's disease, Parkinson's disease, Huntington's disease and Charcot-Marie-Tooth disease. Furthermore, it is becoming increasingly clear that cytoskeletal integrity and mitochondrial function are intricately linked. Therefore, dysregulations of the cytoskeletal network and mitochondrial homeostasis and localization, may be common pathways in the initial steps of neurodegeneration. Here we review and discuss known contributors, including variants in genetic loci and aberrant protein activities, which modify cytoskeletal integrity, axonal transport and mitochondrial localization in ALS and have overlapping features with other neurodegenerative diseases. Additionally, we explore some emerging pathways that may contribute to this disruption in ALS.

Factors related to treatment and outcomes of avulsed teeth.

BACKGROUND: The aim of this study was to examine factors associated with avulsion injury and to specify the association between these factors and the treatment, as well as the outcomes of avulsed permanent incisors in children. MATERIALS AND METHODS: The sample consisted of 51 children with 62 avulsed permanent incisors, whose injuries had been managed in the period 1998-2006. The study was prospective, recording the history of the accident, concomitant injuries, age, gender, apical maturity of the root, replantation rate, storage media, extra-alveolar duration, endodontic treatment, compliance and recall appointments response. Factors were analysed in relation to postoperative outcomes, classified as functional healing (FH), infection-related (inflammatory) resorption (IRR) and replacement resorption (RR). RESULTS: The average age of patients was 10.7 years (range 7-19). In 16/51 patients, tooth avulsion was caused by a road traffic accident. Avulsion was accompanied by concomitant injuries in all cases. Thirty of 62 avulsed teeth were not replanted and 32 incisors were replanted after dry storage. Time until replantation ranged between 15 min and 9 h (median 60 min). The observation period ranged from 1 to 6 years (median 2 years). FH was observed in 5/32, IRR in 20/32 and RR in 7/32 incisors. Ten teeth were extracted during 5-years of observation. Immature incisors exhibited significantly more complications compared with mature teeth (P = 0.04). Storage media and extra-alveolar duration did not significantly affect the survival of replanted teeth (P = 0.253, P = 0.350). Teeth in which endodontic treatment was in temporary phase exhibited significantly more complications in comparison with teeth with completed endodontic treatment (P = 0.0l6). CONCLUSION: The combination of delayed replantation and unphysiological storage is followed by low survival. Incisors with open apices exhibited lower survival compared with incisors with closed apices. Replanted incisors that required prolonged treatment with calcium hydroxide exhibited more complications compared with incisors with completed root canal treatment.

Viscosity and mixing properties of artificial saliva and four different mouthwashes.

BACKGROUND: Numerous functions of saliva depend on its biophysical properties. Mouth rinses react with saliva and change both their own properties and properties of saliva. OBJECTIVE: The aim of this study was to define the level of mixing of artificial saliva and mouth rinses, and define their viscosity and its changes at room and body temperature. METHODS: Artificial saliva, fluoride solutions, chlorhexidine, zinc-hydroxyapatite solution and casein phosphopeptide amorphous calcium phosphate were used. To simulate their mixing, Y-channel PVC chips were used, in two different microfluidics systems. The experiments were recorded with a microscope, then the proportion of mixing was calculated using Matlab. For viscosity measurements rotational viscometer was used. RESULTS: The results show partial mixing of all solutions with artificial saliva. Measurements with a viscometer indicate different viscosities of all used solutions. Viscosity of a mixture of solution and artificial saliva is always in the range of viscosity of the artificial saliva and the solution separately. Moreover, viscosity of all solutions, as well as mixture with artificial saliva, significantly decreases at higher temperature. CONCLUSION: Intraoral administration of mouth rinses results in change of biophysical properties of both saliva and mouth rinses. Those changes can affect preventive and therapeutic effect, and therefore oral health.

Clinical evaluation of a chemomechanical method for caries removal in children and adolescents.

OBJECTIVE: The purpose of this study was to make a clinical comparison of the chemomechanical method for caries removal and the conventional rotary instruments technique when used in children and adolescents. MATERIAL AND METHODS: The study comprised 120 patients aged 3-17 years randomized into two groups: caries were removed chemomechanically in 60 patients and 60 patients received conventional treatment with rotary instruments. The outcome variables were: clinically complete caries removal, pain during caries removal, need for local anesthesia, treatment time, preferences of patients, and clinical success of the restorations during the 12-month evaluation period. RESULTS: Complete caries removal was achieved in 92% of chemomechanically treated teeth and in all teeth treated with rotary instruments (p>0.05). The chemomechanical method significantly reduced the need for local anesthesia (p<0.001). Eighty-five percent of patients treated with Carisolv and 47% treated with rotary instruments were satisfied with the treatment (p<0.05). The mean time for chemomechanical caries removal was 11.2 ± 3.3 min and 5.2 ± 2.8 min for caries removal with rotary instruments (p<0.001). At the end of the 12-month evaluation period, there was no observed influence of the caries removal method on the survival of the restorations. CONCLUSIONS: The chemomechanical caries removal technique is an adequate alternative to the conventional rotary instruments method and is advantageous in pediatric dentistry.

A retrospective study of intrusive injuries in primary dentition.

OBJECTIVE: The aim was to evaluate epidemiological aspects of intrusive injuries in primary teeth, extent and severity of injuries, provided treatment, and complications to the primary and permanent dentition. METHODS: This was a retrospective study based on the clinical and radiographic data of 102 intruded teeth in 70 patients. Follow-up period varied from 6 months to 6 years, with the mean time of 2.7 +/- 1.5 years. Data were collected through dental files and dental trauma forms. The following parameters were analyzed at control examinations: rate of spontaneous re-eruption, presence of complications, time elapsed between the injury and complication, and possible sequels on permanent successors. RESULTS: Mean age of the patients was 2.5 +/- 1.3 years. Fifty-six children were injured because of the fall while walking or running. Most of children had one intruded tooth. Maxillary central incisors were the most frequently injured teeth. Seventy injured teeth were <2 mm intruded. Mean time elapsed from the injury until the professional help was 45.0 +/- 67.3 h. Within 2 months after trauma, 48 intruded teeth re-erupted spontaneously. Crown discoloration occurred in 10 intruded teeth, pulp necrosis was diagnosed in nine cases and pathologic root resorption was found in five injured teeth. CONCLUSIONS: The most common mechanism of injury was fall. Spontaneous re-eruption occurred in the majority of intruded primary teeth. In comparison with moderate or severe intrusions, mildly intruded teeth took less time to re-erupt. Mildly intruded teeth exhibited less complications in comparison with moderately and severely intruded teeth.