Cerato-Platanins from Marine Fungi as Effective Protein Biosurfactants and Bioemulsifiers.

Two fungal strains, Aspergillus terreus MUT 271 and Trichoderma harzianum MUT 290, isolated from a Mediterranean marine site chronically pervaded by oil spills, can use crude oil as sole carbon source. Herein, these strains were investigated as producers of biosurfactants, apt to solubilize organic molecules as a preliminary step to metabolize them. Both fungi secreted low molecular weight proteins identified as cerato-platanins, small, conserved, hydrophobic proteins, included among the fungal surface-active proteins. Both proteins were able to stabilize emulsions, and their capacity was comparable to that of other biosurfactant proteins and to commercially available surfactants. Moreover, the cerato-platanin from T. harzianum was able to lower the surface tension value to a larger extent than the similar protein from A. terreus and other amphiphilic proteins from fungi. Both cerato-platanins were able to make hydrophilic a hydrophobic surface, such as hydrophobins, and to form a stable layer, not removable even after surface washing. To the best of our knowledge, the ability of cerato-platanins to work both as biosurfactant and bioemulsifier is herein demonstrated for the first time.

Development of a biosensing platform based on a laccase-hydrophobin chimera.

A simple and stable immobilization of a laccase from Pleurotus ostreatus was obtained through genetic fusion with a self-assembling and adhesive class I hydrophobin. The chimera protein was expressed in Pichia pastoris and secreted into the culture medium. The crude culture supernatant was directly used for coatings of polystyrene multi-well plates without additional treatments, a procedure that resulted in a less time-consuming and chemicals reduction. Furthermore, the gene fusion yielded a positive effect with respect to the wild-type recombinant enzyme in terms of both immobilization and stability. The multi-well plate with the immobilized chimera was used to develop an optical biosensor to monitor two phenolic compounds: L-DOPA ((S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid) and caffeic acid (3-(3,4-dihydroxyphenyl)-2-propenoic acid); the estimation of which is a matter of interest in the pharmaceutics and food field. The method was based on the use of the analytes as competing inhibitors of the laccase-mediated ABTS oxidation. The main advantages of the developed biosensor are the ease of preparation, the use of small sample volumes, and the simultaneous analysis of multiple samples on a single platform.

How to enjoy laccases.

An analysis of the scientific literature published in the last 10 years reveals a constant growth of laccase applicative research in several industrial fields followed by the publication of a great number of patents. The Green Chemistry journal devoted the cover of its September 2014 issue to a laccase as greener alternative for chemical oxidation. This indicates that laccase "never-ending story" has found a new promising trend within the constant search for efficient (bio)catalysts able to meet the 12 green chemistry principles. A survey of ancient and cutting-edge uses of laccase in different industrial sectors is offered in this review with the aim both to underline their potential and to provide inspiration for new ones. Applications in textile and food fields have been deeply described, as well as examples concerning polymer synthesis and laccase-catalysed grafting. Recent applications in pharmaceutical and cosmetic industry have also been reviewed.

Trichoderma harzianum cerato-platanin enhances hydrolysis of lignocellulosic materials.

Considering its worldwide abundance, cellulose can be a suitable candidate to replace the fossil oil-based materials, even if its potential is still untapped, due to some scientific and technical gaps. This work offers new possibilities demonstrating for the first time the ability of a cerato-platanin, a small fungal protein, to valorize lignocellulosic Agri-food Wastes. Indeed, cerato-platanins can loosen cellulose rendering it more accessible to hydrolytic attack. The cerato-platanin ThCP from a marine strain of Trichoderma harzianum, characterized as an efficient biosurfactant protein, has proven able to efficiently pre-treat apple pomace, obtaining a sugar conversion yield of 65%. Moreover, when used in combination with a laccase enzyme, a notable increase in the sugar conversion yield was measured. Similar results were also obtained when other wastes, coffee silverskin and potato peel, were pre-treated. With respect to the widespread laccase pre-treatments, this new pre-treatment approach minimizes process time, increasing energy efficiency.

Development of anti-bacterial surfaces using a hydrophobin chimeric protein.

The search for new approaches for developing antimicrobial surfaces is a challenge of great urgency to prevent and control microbial growth on surfaces. The strategy herein proposed relies on the design of a new, simple and general tool for creating antimicrobial surfaces, based on a hydrophobin chimeric protein which fuses the adhesive self-assembling class I hydrophobin Vmh2 from Pleurotus ostreatus to the human antimicrobial peptide LL-37. The recombinant LL37-Vmh2 protein displayed both the adhesive and the antimicrobic properties of its members, and when deposited on polystyrene surface, a positive effect due to the fusion was observed in terms of both efficacy and versatility of the coating. Indeed, the chimeric protein significantly enlarges the range of pathogens affected by Vmh2 layer rendering it able to inhibit three Gram-positive and two Gram-negative pathogens, selected among the renowned biofilm producer bacteria. Confocal Laser Scanning Microscopy analysis performed on Staphylococcus epidermidis biofilms formed on coated surfaces proved that, besides inhibiting biofilm formation, the LL37-Vmh2 coating also displayed biocidal activity, since dead cells were present in the biofilm layer. The reported results open new perspectives in various fields of application of LL37, and of antimicrobial peptides in general. LL37-Vmh2 increases the inventory of chimeric hydrophobins, further proving their effectiveness and versatility in surface functionalization.

Laccase pretreatment for agrofood wastes valorization.

Apple pomace, potato peels, and coffee silverskin are attractive agrofood wastes for the production of biofuels and chemicals, due to their abundance and carbohydrate content. As lignocellulosic biomasses, their conversion is challenged by the presence of lignin that prevents hydrolysis of polysaccharides, hence demanding a pretreatment step. In this work, the effectiveness of Pleurotus ostreatus laccases (with and without mediator) to remove lignin, improving the subsequent saccharification, was assessed. Optimized conditions for sequential protocol were set up for all agrofood wastes reaching delignification and detoxification yields correlated with high saccharification. Especially noteworthy were results for apple pomace and coffee silverskin for which 83% of and 73% saccharification yields were observed, by using laccase and laccase mediator system, respectively. The herein developed sequential protocol, saving soluble sugars and reducing the amount of wastewater, can improve the overall process for obtaining chemicals or fuels from agrofood wastes.

Rapid and ultrasensitive detection of active thrombin based on the Vmh2 hydrophobin fused to a Green Fluorescent Protein.

A fusion protein designed in order to combine the fluorescence emission of the Green Fluorescent Protein (GFP) with the adhesion ability of the class I hydrophobin Vmh2 was heterologously produced in the yeast Pichia pastoris. The Vmh2-GFP fusion protein has proven to be a smart and effective tool for the study of Vmh2 self-assembling. Since the two proteins were linked by the specific cutting site of the thrombin, the fusion protein was used as the active biological element in the realization of a thrombin biosensor. When the thrombin present in the target solution specifically hydrolyzed its cleavage sequence, a consequent decrease in the fluorescence intensity of the sample could be observed. The Vmh2-GFP based assay allowed quantification of thrombin in solution with a detection limit of 2.27aM. The specificity of the assay with respect to other proteases and proteins granted the measurement of thrombin added to healthy human plasma with same high sensitivity and a limit of detection of 2.3aM. Further advantages of the developed biosensor are the simplicity of its design and preparation, and the low requirements in terms of samples, reagents and time.

Oxidoreductases on their way to industrial biotransformations.

Fungi produce heme-containing peroxidases and peroxygenases, flavin-containing oxidases and dehydrogenases, and different copper-containing oxidoreductases involved in the biodegradation of lignin and other recalcitrant compounds. Heme peroxidases comprise the classical ligninolytic peroxidases and the new dye-decolorizing peroxidases, while heme peroxygenases belong to a still largely unexplored superfamily of heme-thiolate proteins. Nevertheless, basidiomycete unspecific peroxygenases have the highest biotechnological interest due to their ability to catalyze a variety of regio- and stereo-selective monooxygenation reactions with H2O2 as the source of oxygen and final electron acceptor. Flavo-oxidases are involved in both lignin and cellulose decay generating H2O2 that activates peroxidases and generates hydroxyl radical. The group of copper oxidoreductases also includes other H2O2 generating enzymes - copper-radical oxidases - together with classical laccases that are the oxidoreductases with the largest number of reported applications to date. However, the recently described lytic polysaccharide monooxygenases have attracted the highest attention among copper oxidoreductases, since they are capable of oxidatively breaking down crystalline cellulose, the disintegration of which is still a major bottleneck in lignocellulose biorefineries, along with lignin degradation. Interestingly, some flavin-containing dehydrogenases also play a key role in cellulose breakdown by directly/indirectly "fueling" electrons for polysaccharide monooxygenase activation. Many of the above oxidoreductases have been engineered, combining rational and computational design with directed evolution, to attain the selectivity, catalytic efficiency and stability properties required for their industrial utilization. Indeed, using ad hoc software and current computational capabilities, it is now possible to predict substrate access to the active site in biophysical simulations, and electron transfer efficiency in biochemical simulations, reducing in orders of magnitude the time of experimental work in oxidoreductase screening and engineering. What has been set out above is illustrated by a series of remarkable oxyfunctionalization and oxidation reactions developed in the frame of an intersectorial and multidisciplinary European RTD project. The optimized reactions include enzymatic synthesis of 1-naphthol, 25-hydroxyvitamin D3, drug metabolites, furandicarboxylic acid, indigo and other dyes, and conductive polyaniline, terminal oxygenation of alkanes, biomass delignification and lignin oxidation, among others. These successful case stories demonstrate the unexploited potential of oxidoreductases in medium and large-scale biotransformations.

Low impact strategies to improve ligninolytic enzyme production in filamentous fungi: the case of laccase in Pleurotus ostreatus.

The ever-increasing demand of laccases for biodelignification, industrial oxidative processes and environmental bioremediation requires the production of large quantities of enzymes at low cost. The present work was carried out to reduce laccase production costs in liquid fermentations of the white-rot fungus Pleurotus ostreatus through two different approaches. In the first, screening of fungal spent media as natural laccase inducer was performed, eliminating the presence of potentially toxic/recalcitrant and expensive exogenous inducers in the culture broth. In the latter, breeding of different strains of P. ostreatus, screened for their laccase productivity, was performed by cross-hybridisation, avoiding genetic transformation and mutagenic treatments that could produce organisms not suitable for "natural or safe processes". A laccase production level close to 80,000U/L by combining the two approaches was achieved. Autoinduction and classical breeding represent promising tools for the improvement of fungal fermentation without affecting the disposable costs that also depend on the eco-compatibility of the whole process.

Fungal laccases: versatile tools for lignocellulose transformation.

Conversion of lignocellulosic materials to useful, high value products normally requires a pre-treatment step to transform or deconstruct the recalcitrant and heterogeneous lignin fraction. The development of "green tools" for the transformation of lignocellulosic feedstocks is in high demand for a sustainable exploitation of such resources. This multi-faceted challenge is being addressed by an ever-increasing suite of ligninolytic enzymes isolated from various sources. Among these, fungal laccases are known to play an important role in lignin degradation/modification processes. The white-rot fungus Pleurotus ostreatus expresses multiple laccase genes encoding isoenzymes with different properties. The availability of established recombinant expression systems for P. ostreatus laccase isoenzymes has allowed to further enrich the panel of P. ostreatus laccases by the construction of mutated, "better performing" enzymes through molecular evolution techniques. New oxidative catalysts with improved activity and stability either at high temperature and at acidic and alkaline pH have been isolated and characterized.