In vitro behavior of layer-by-layer deposited molecular oligoelectrolyte films on Ti-6Al-4V surfaces.

Layer-by-layer self-assembled films of molecular oligoelectrolytes were used to modify Ti-6Al-4V surfaces in order to test their ability as potential drug delivery system. With regard to medical application the in vitro behavior of the modified material was investigated. The Ti-6Al-4V (6% aluminium, 4% vanadium) material was treated in a layer-by-layer (LbL) process with 2, 4, 6 and 8 layers of molecular oligoelectrolytes 1 and 2 and thereby doped with a fluorescent reporter molecule 2. Human osteoblasts were cultured for a period up to 5 days on the modified material. Ti-6Al-4V surfaces without modification were used as control. In order to investigate the in vitro behavior of the coating as well as the influence of components of the coating on osteoblastic cells, respectively, cell proliferation, differentiation and attachment of hFOB cells were observed by means of cell number, osteoblastic gene expression and fluorescence microscopy. Degradation behavior of the OEM (oligoelectrolyte multilayer film) was examined using optical spectroscopy. Measurement data imply that the layer-by-layer coating was successfully assembled on the Ti surface and endures steam sterilization. The fluorescence signal in cell culture medium increased strictly linear with increasing pre-assembled number of layers on the surface. Proliferation rates of the cells in experimental groups did not differ significantly from each other (P >or= 0.783). Differentiation pattern was not significantly changed by the coating. The fluorescent reporter component of the film was absorbed by osteoblastic cells and was detected by fluorescence microscopy.

In vitro response of hFOB cells to pamidronate modified sodium silicate coated cellulose scaffolds.

The aim of the present study was to evaluate the suitability of cellulose-based scaffolds coated with pure sodium silicate gel and sodium silicate gels accumulated with different concentrations of the bisphosphonate pamidronate as scaffolds for attachment, proliferation and differentiation of human fetal osteoblasts (hFOB 1.19). Human osteoblasts were cultured in vitro for a period up to 14 days on different cellulose scaffolds. Unmodified and sodium silicate coated cellulose scaffolds were used as control. Two surface-coated modifications of cellulose were applied. The scaffolds were coated in a modified two-step dip coating process with pure sodium silicate gel and pamidronate enriched sodium silicate gel, respectively. In order to investigate the influence of the pamidronate, concentrations of 0.667 mg Na-pamidronate/ml sodium silicate solution, 0.333 mg Na-pamidronate/ml sodium silicate solution and 3.33 x 10(-3) mg Na-pamidronate/ml sodium silicate solution were used for the coating process. Cell proliferation, vitality and attachment were examined by means of cell counting, WST-1 test, fluorescence and scanning electron microscopy. The relative grade of differentiation of hFOB cells was examined by using quantitative real-time polymerase chain reaction (qRT-PCR) analysis for the gene expression of alkaline phosphatase and osteocalcin. Proliferation and differentiation of human osteoblasts was enhanced by the sodium silicate coatings accumulated with pamidronate compared to pure sodium silicate coatings. There was a reciprocal correlation of vitality with the concentration of pamidronate. The highest vitality was found on surfaces with the lowest pamidronate accumulation. Alkaline phosphatase, an early differentiation marker, was overexpressed after 7 days in cells on all pamidronate-containing surfaces (up to 350% compared to untreated cellulose). Osteocalcin, a late differentiation marker, was overexpressed after 14 days in cells on all coated surfaces (up to 300,000% compared to untreated cellulose). The results indicate that due to the modified coating procedure a homogeneous coating and thus, an enhancement of cell attachment and subsequent cellular functions can be achieved. Low concentrations of pamidronate seem to have a relevant effect on cell proliferation and vitality and, therefore, can be recommended for the improvement of the properties of a biomaterial.

In vivo performance of selective electron beam-melted Ti-6Al-4V structures.

Highly porous titanium structures are widely used for maxillofacial and orthopedic surgery because of their excellent mechanical properties similar to those of human bone and their facilitation of bone ingrowth. In contrast to common methods, the generation of porous titaniumproducts by selective electron beam melting (SEBM), an additive manufacturing technology, overcomes difficulties concerning the extreme chemical affinity of liquid titanium to atmospheric gases which consequently leads to strongly reduced ductility of the metal. The purpose of this study was to assess the suitability of a smooth compact and a porous Ti-6Al-4V structure directly produced by the SEBM process as scaffolds for bone formation. SEBM-processed titanium implants were placed into defects in the frontal skull of 15 domestic pigs. To evaluate the direct contact between bone and implant surfaces and to assess the ingrowth of osseous tissue into the porous structure, microradiographs and histomorphometric analyses were performed 14, 30, and 60 days after surgery. Bone ingrowth increased significantly during the period of this study. After 14 days the most outer regions of the implants were already filled with newly formed bone tissue (around 14%). After 30 days the bone volume inside the implants reached almost 30% and after 60 days abundant bone formation inside the implants attained 46%. During the study only scarce bone-implant contact was found around all implants, which did not exceed 9% around compact specimens and 6% around porous specimens after 60 days. This work demonstrates that highly porous titanium implants with excellent interconnectivity manufactured using the SEBM method are suitable scaffolds for bone ingrowth. This technique is a good candidate for orthopedic and maxillofacial applications.

Effects of topographical surface modifications of electron beam melted Ti-6Al-4V titanium on human fetal osteoblasts.

The aim of the study was to assess the suitability of different Ti-6Al-4V surfaces produced by the electron beam melting (EBM) process as matrices for attachment, proliferation, and differentiation of human fetal osteoblasts (hFOB 1.19). Human osteoblasts were cultured in vitro on smooth and rough-textured Ti-6Al-4V alloy disks. By means of cell number and vitality and SEM micrographs cell attachment and proliferation were observed. The differentiation rate was examined by using quantitative real-time PCR analysis for the gene expression of alkaline phosphatase (ALP), type I collagen (Coll-I), bone sialoprotein (BSP) and osteocalcin (OC). After 3 days of incubation there was a significant higher vitality (p < 0.02) and proliferation (p < 0.02) of hFOB cells on smooth surfaces (R(a) = 0.077 microm) and compact surfaces with adherent partly molten titanium particles on the surface (R(a) /= 56.9 microm) reduced proliferation of hFOB cells. Surface characteristics of titanium can easily be changed by EBM in order to further improve proliferation.