Effect of toothpaste tablets on gloss and surface roughness of resin-based composite materials.

PURPOSE: To evaluate the effects of toothpaste tablets on the gloss and surface roughness of resin-based composite materials and determine the relationship between gloss and roughness. METHODS: Rectangular jigs were designed and printed. Wells (2 mm deep x 7 mm diameter) were filled with Filtek Supreme Ultra A2B, light-cured and polished. A small-area glossmeter was used for gloss (GU) measurements and a profilometer for roughness measurements (Ra) at baseline and after challenge with each toothpaste. An automated tooth-brushing machine was set at 120 strokes/minute for a total of 10,000 strokes to evaluate four test groups with 16 specimens in each group. NC: Brushing with distilled water; TABS: Colgate Anywhere Travel Tooth Tabs; CP: Colgate Cavity Protection Toothpaste and AW: Colgate Whitening Advanced Toothpaste. Kruskal-Wallis test was used to test the difference in gloss and surface roughness among the groups and Pearson correlation was used to compare the relationship between gloss and roughness. RESULTS: There was no statistically significant difference in gloss and roughness among the four groups at baseline. At post-brushing, there was a statistically significant difference among the groups (P< 0.001) with increased roughness and decreased gloss for CP and AW when compared to TABS. There was a statistically significant correlation between post-brushing roughness and post-brushing gloss (P< 0.001, rho: -0.815). Thus, the higher the surface roughness the lower the gloss. CLINICAL SIGNIFICANCE: Toothpaste tablets retain better gloss and roughness of resin-based composite materials when compared to conventional toothpastes.

Dosimetric characterization of a novel intracavitary mold applicator for 192Ir high dose rate endorectal brachytherapy treatment.

The dosimetric properties of a novel intracavitary mold applicator for 192Ir high dose rate (HDR) endorectal cancer treatment have been investigated using Monte Carlo (MC) simulations and experimental methods. The 28 cm long applicator has a flexible structure made of silicone rubber for easy passage into cavities with deep-seated tumors. It consists of eight source catheters arranged around a central cavity for shielding insertion, and is compatible for use with an endocavitary balloon. A phase space model of the HDR source has been validated for dose calculations using the GEANT4 MC code. GAFCHROMIC EBT model film was used to measure dose distributions in water around shielded and unshielded applicators with two loading configurations, and to quantify the shielding effect of a balloon injected with an iodine solution (300 mg I/mL). The film calibration procedure was performed in water using an 192Ir HDR source. Ionization chamber measurements in a Lucite phantom show that placing a tungsten rod in the applicator attenuates the dose in the shielded region by up to 85%. Inserting the shielded applicator into a water-filled balloon pushes the neighboring tissues away from the radiation source, and the resulting geometric displacement reduces the dose by up to 53%; another 8% dose reduction can be achieved when the balloon is injected with an iodine solution. All experimental results agree with the GEANT4 calculations within measurement uncertainties.

Effect of hepatic lipase -514C->T polymorphism and its interactions with apolipoprotein C3 -482C->T and apolipoprotein E exon 4 polymorphisms on the risk of nephropathy in chinese type 2 diabetic patients.

OBJECTIVE: Triglyceride-rich lipoprotein particles may promote the progression of diabetic nephropathy. Patients with diabetic nephropathy have increased plasma triglycerides and reduced activity of hepatic lipase (HL), which hydrolyzes triglycerides. We hypothesized that the HL -514C-->T polymorphism, which reduces HL expression, and its interactions with polymorphisms in apolipoprotein (apo) E and apoC3 increase the risk of diabetic nephropathy. RESEARCH DESIGN AND METHODS: In a case-control study involving 374 Chinese type 2 diabetic patients with and 392 without diabetic nephropathy, we genotyped the HL -514C-->T, apoE exon 4, and apoC3 -482C-->T polymorphisms. RESULTS: HL -514T-containing genotypes (T+) were associated with diabetic nephropathy (OR = 1.7, P = 0.0009). Adjustment by multiple logistic regression for hypertension, triglycerides, sex, non-HDL cholesterol, BMI, smoking, and alcohol intake did not diminish the association (OR = 1.8, P = 0.003). The association between HL T+ genotypes and diabetic nephropathy appeared stronger in diabetic patients with apoC3 -482 non-TT genotypes (OR = 1.9, P = 0.003) or apoE epsilon2 or epsilon4 alleles (OR = 2.2, P = 0.005). Subjects with HL TT exhibited trends toward increased triglyceride and non-HDL cholesterol levels compared with CC carriers. CONCLUSIONS: HL T+ genotypes might increase the risk of developing diabetic nephropathy by slowing clearance of triglyceride-rich remnant lipoproteins. In concert with other risk factors (e.g., hyperglycemia), lipid abnormalities may damage the kidneys and endothelium, where reduced binding sites for lipases may precipitate a vicious cycle of dyslipidemia, proteinuria, and nephropathy.

Multifunctional skin-like electronics for quantitative, clinical monitoring of cutaneous wound healing.

Non-invasive, biomedical devices have the potential to provide important, quantitative data for the assessment of skin diseases and wound healing. Traditional methods either rely on qualitative visual and tactile judgments of a professional and/or data obtained using instrumentation with forms that do not readily allow intimate integration with sensitive skin near a wound site. Here, an electronic sensor platform that can softly and reversibly laminate perilesionally at wounds to provide highly accurate, quantitative data of relevance to the management of surgical wound healing is reported. Clinical studies on patients using thermal sensors and actuators in fractal layouts provide precise time-dependent mapping of temperature and thermal conductivity of the skin near the wounds. Analytical and simulation results establish the fundamentals of the sensing modalities, the mechanics of the system, and strategies for optimized design. The use of this type of "epidermal" electronics system in a realistic clinical setting with human subjects establishes a set of practical procedures in disinfection, reuse, and protocols for quantitative measurement. The results have the potential to address important unmet needs in chronic wound management.