A Fluorescent Molecularly Imprinted Polymer-Coated Paper Sensor for On-Site and Rapid Detection of Glyphosate.

Due to the massive use and abuse of pesticides, practices which have led to serious threats to human health, the research community must develop on-site and rapid detection technology of pesticide residues to ensure food safety. Here, a paper-based fluorescent sensor, integrated with molecularly imprinted polymer (MIP) targeting glyphosate, was prepared by a surface-imprinting strategy. The MIP was synthesized by a catalyst-free imprinting polymerization technique and exhibited highly selective recognition capability for glyphosate. The MIP-coated paper sensor not only remained selective, but also displayed a limit of detection of 0.29 µmol and a linear detection range from 0.5 to 10 µmol. Moreover, the detection time only took about 5 min, which is beneficial for rapid detection of glyphosate in food samples. The detection accuracy of such paper sensor was good, with a spiked recovery rate of 92-117% in real samples. The fluorescent MIP-coated paper sensor not only has good specificity, which is helpful to reduce the food matrix interference and shorten the sample pretreatment time, but it also has the merits of high stability, low-cost and ease of operation and carrying, displaying great potential for application in the on-site and rapid detection of glyphosate for food safety.

MicroRNA-22 suppresses NLRP3/CASP1 inflammasome pathway-mediated proinflammatory cytokine production by targeting the HIF-1α and NLRP3 in human dental pulp fibroblasts.

AIM: To investigate the synergetic regulatory effect of miR-22 on HIF-1α and NLRP3, subsequently regulating the production of the NLRP3/CASP1 inflammasome pathway-mediated proinflammatory cytokines IL-1ß and IL-18 in human dental pulp fibroblasts (HDPFs) during the progression of pulpitis. METHODOLOGY: Fluorescence in situ hybridization (FISH) and immunofluorescence (IF) were performed to determine the localization of miR-22-3p, NLRP3 and HIF-1α in human dental pulp tissues (HDPTs). The miR-22 mimics and inhibitor or plasmid of NLRP3 or HIF-1α were used to upregulate or downregulate miR-22 or NLRP3 or HIF-1α in HDPFs, respectively. Computational prediction via TargetScan 5.1 and a luciferase reporter assay were conducted to confirm target association. The mRNA and protein expression of HIF-1α, NLRP3, caspase-1, IL-1ß and IL-18 were determined by qRT-PCR and western blotting, respectively. The release of IL-1ß and IL-18 was analysed by ELISA. The significance of the differences between the experimental and control groups was determined by one-way analysis of variance, p < .05 indicated statistical significance. RESULTS: A decrease in miR-22 and an increase in HIF-1α and NLRP3 in HDPTs occurred during the transformation of reversible pulpitis into irreversible pulpitis compared with that in the healthy pulp tissues (p < .05). In the normal HDPTs, miR-22-3p was extensively expressed in dental pulp cells. HIF-1α and NLRP3 were mainly expressed in the odontoblasts and vascular endothelial cells. Whereas in the inflamed HDPTs, the odontoblast layers were disrupted. HDPFs were positive for miR-22-3p, HIF-1α and NLRP3. Computational prediction via TargetScan 5.1 and luciferase reporter assays confirmed that both NLRP3 and HIF-1α were direct targets of miR-22 in HDPFs. The miR-22 inhibitor further promoted the activation of NLRP3/CASP1 inflammasome pathway induced by ATP plus LPS and hypoxia (p < .05). In contrast, the miR-22 mimic significantly inhibited the NLRP3/CASP1 inflammasome pathway activation induced by ATP plus LPS and hypoxia (p < .05). CONCLUSION: MiR-22, as a synergetic negative regulator, is involved in controlling the secretion of proinflammatory cytokines mediated by the NLRP3/CASP1 inflammasome pathway by targeting NLRP3 and HIF-1α. These results provide a novel function and mechanism of miR-22-HIF-1α-NLRP3 signalling in the control of proinflammatory cytokine secretion, thus indicating a potential therapeutic strategy for future endodontic treatment.

The effect of 3D-printed plastic teeth on scores in a tooth morphology course in a Chinese university.

BACKGROUND: The tooth morphology course is an important basic dental course. However, it is difficult to fully reflect the three-dimensional (3D) morphological characteristics of tooth structure in two-dimensional pictures in traditional textbooks. The aim of this study was to assess the effect of 3D-printed plastic model teeth in the teaching of tooth morphology. METHODS: Twenty-two undergraduate students who matriculated at the School of Stomatology, the Fourth Medical University, in 2014 and 23 who matriculated in 2016 participated in the study. Each student who matriculated in 2016 was given a full set of fourteen standard 3D-printed plastic model teeth for use during the learning process, and an anonymous questionnaire was used to evaluate the usefulness of the 3D-printed plastic model teeth from the perspective of the students. RESULTS: There was no significant difference between the two groups in the scores of the theoretical examination or the total score. However, for the score of the sculpted gypsum teeth, the students who used the 3D-printed plastic model teeth in their studies scored significantly higher (P = 0.002). More than 90% of the students thought that the 3D-printed plastic model teeth were of great help or were very helpful for mastering the anatomy of teeth and for carving the gypsum teeth. CONCLUSION: Standard 3D-printed plastic teeth can effectively assist students in learning tooth morphology by transforming two-dimensional pictures and descriptions in the textbook into a 3D conformation, effectively promoting students' learning and mastery of tooth morphology and structure. Additionally, the results suggest that 3D-printed plastic model teeth are of great help to the students in mastering and improving their carving skills.

Synergistic effects of stromal cell-derived factor-1α and bone morphogenetic protein-2 treatment on odontogenic differentiation of human stem cells from apical papilla cultured in the VitroGel 3D system.

Pulp-dentin regeneration in the apical region of immature permanent teeth represents a significant clinical challenge. Tissue engineering approaches using bioactive molecules and scaffolds may have the potential to regenerate the natural apical structure of these teeth, representing a superior alternative to existing treatment regimens. The aims of this study are (i) to evaluate the VitroGel 3D system, an animal origin-free polysaccharide hydrogel, as a possible injectable scaffold for pulp-dentin regeneration and (ii) to investigate the effects of stromal cell-derived factor-1α (SDF-1α) and bone morphogenetic protein-2(BMP-2) cotreatment on odontogenic differentiation of human stem cells from apical papilla (SCAP) cultured in the VitroGel 3D system. The morphology, viability and proliferation of SCAP cultured in the VitroGel 3D system were measured via scanning electron microscopy (SEM), live and dead cell staining and CCK-8 assays. Alkaline phosphatase (ALP) activity, real-time reverse transcriptase polymerase chain reaction (real-time RT-PCR) and Western blot analysis were further used to evaluate the odontogenic differentiation of SCAP cultured in the VitroGel 3D system in vitro. Finally, the odontogenic differentiation was assessed in vivo through ectopic subcutaneous injection. The results showed that SCAP cultured in 3D hydrogel demonstrated favorable viability and proliferation. SDF-1α and BMP-2 cotreatment enhanced odontogenic differentiation-related gene and protein expression in vitro and promoted odontogenic differentiation of SCAP in vivo. In conclusion, the present study demonstrated that the VitroGel 3D system promoted SCAP proliferation and differentiation. Moreover, SDF-1α cotreatment had synergistic effects on BMP-2-induced odontogenic differentiation of human SCAP cultured in the VitroGel 3D system both in vitro and in vivo.

Effect of Layer Charge Density on Hydration Properties of Montmorillonite: Molecular Dynamics Simulation and Experimental Study.

Four kinds of Ca-montmorillonite with different layer charge density were used to study the effect of charge density on their hydration properties by molecular dynamics simulation and experiments. The research results of Z-density distribution of water molecules, Hw (hydrogen in water molecules), and Ca in the interlayer of montmorillonite show that the hydration properties of montmorillonite are closely related to its layer charge density. If the charge density is low, the water molecules in the interlayers are mainly concentrated on the sides of the central axis about -1.3 Å and 1.5 Å. As the charge density increases from 0.38semi-cell to 0.69semi-cell, the water molecules are distributed -2.5 Å and 2.4 Å away from the siloxane surface (Si-O), the concentration of water molecules near the central axis decreases, and at the same time, Ca2+ appears to gradually shift from the vicinity of the central axis to the Si-O surface on both sides in the montmorillonite layer. The simulation results of the radial distribution function (RDF) of the Ca-Hw, Ca-Ow (oxygen in water molecules), and Ca-Ot (the oxygen in the tetrahedron) show that the Ca2+ and Ow are more tightly packed together than that of Hw; with the increase of the charge density, due to the fact that the negative charge sites on the Si-O surface increase, under the action of electrostatic attraction, some of the Ca2+ are pulled towards the Si-O surface, which is more obvious when the layer charge density of the montmorillonite is higher. The results of the RDF of the Ot-Hw show that with the increase of charge density, the number of hydrogen bonds formed by Ot and Hw in the interlayers increase, and under the action of hydrogen bonding force, the water molecules near the central axis are pulled towards the two sides of Si-O surface. As a result, the arrangement of water molecules is more compact, and the structure is obvious. Correspondingly, the self-diffusion coefficient shows that the higher the layer charge density, the lower the self-diffusion coefficient of water molecules in interlayers is and the worse the hydration performance of montmorillonite. The experimental results of the experiments fit well with the above simulation results.

Concentrated polymer brushes do not induce the expression of inflammatory and angiogeneic genes in human umbilical vein endothelial cells.

OBJECTIVE: When polymer brushes are applied as the inner coating for artificial blood vessels, they may induce unwanted responses in vascular endothelial cells continuously exposed to the polymer surface. Accordingly, we have examined the in vitro effect of non-biofouling concentrated polymer brushes (CPBs) on pro-inflammatory and angiogenic responses of human umbilical vein endothelial cells (HUVECs). RESULTS: Micro-patterned CPBs were prepared on silicon wafers using biocompatible polymers, poly(poly(ethylene glycol)methyl ether methacrylate) (PPEGMA) and poly(2-hydroxyethyl methacrylate) (PHEMA). HUVECs were cultured on PPEGMA-CPBs and PHEMA-CPBs with different channel widths (20, 50, and 80 µm) and analyzed for mRNA expression of the pro-inflammatory cytokines IL-6 and IL-8 and angiogeneic vascular endothelial growth factor (VEGF). Irrespective of channel width, PHEMA-CPBs reduced the expression of all target genes, whereas PPEGMA-CPBs reduced VEGF and did not affect IL-6 and IL-8 levels. CONCLUSION: Micro-patterned CPBs, irrespective of chemical structure or adhesion area, do not induce the expression of important pro-inflammatory and angiogenic mediators in endothelial cells.

Novel Photoresponsive Linear, Graft, and Comb-Like Copolymers with Azobenzene Chromophores in the Main-Chain and/or Side-Chain: Facile One-Pot Synthesis and Photoresponse Properties.

Novel photoresponsive linear, graft, and comb-like copolymers with azobenzene chromophores in the main-chain and/or side-chain are prepared via a sequential ring-opening metathesis polymerization (ROMP) and head-to-tail acyclic diene metathesis (ADMET) polymerization in a one-pot procedure using Grubbs ruthenium-based catalysts. The diluted solutions of these as-prepared copolymers containing azobenzene chromophores exhibit photochemical trans-cis isomerization under the irradiation of UV light, followed by their cis-trans back-isomerization in visible light. The rates of photoisomerization are found to be slower than those of back-isomerization, and the rate for the comb-like copolymer is found to be from 3 to 7 times slower than that obtained for the linear or graft copolymer. This is ascribed to the differences in structure of the copolymers and the specific location of azobenzene chromophores in the copolymer, which favor a side-chain graft structure.

[Role of Pediatric Critical Illness Score in evaluating severity and prognosis of severe hand-foot-mouth disease].

OBJECTIVE: To investigate the role of Pediatric Critical Illness Score (PCIS) in evaluating the prognosis and severity of severe hand-foot-mouth disease (HFMD). METHODS: This study included 424 children with severe HFMD, consisting of 390 survivors and 34 deceased patients. Related physiological parameters and clinical data were collected for calculating PCIS scores. The area under receiver operating characteristic curve (AUC) was employed to assess the performance of PCIS in evaluating the complications and outcomes. RESULTS: The median of PCIS scores for survivors was higher than that for deceased patients (P<0.01). Of the 424 children with severe HFMD, only 26 (6.1%) had critical illness according to the severity assessment using PCIS. The AUC (95%CI) of PCIS was 0.74 (0.66, 0.82) in predicting pulmonary edema, 0.82 (0.74, 0.90) in predicting pulmonary hemorrhage, and 0.83 (0.75, 0.92) in predicting death. CONCLUSIONS: PCIS can predict the complications and prognosis in children with severe HFMD. However, the existing scoring system of PCIS cannot fully assess the severity of HFMD.

Facile synthesis of brush poly(phosphoamidate)s via one-pot tandem ring-opening metathesis polymerization and atom transfer radical polymerization.

Poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA)-based brush poly(phosphoamidate)s are successfully synthesized by a combination of ring-opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP) following either a commutative two-step procedure or a straightforward one-pot process using Grubbs ruthenium-based catalysts for tandem catalysis. Compared with the traditional polymerization method, combining ROMP and ATRP in a one-pot process allows the preparation of brush copolymers characterized by a relatively moderate molecular weight distribution and quantitative conversion of monomer. Moreover, the surface morphologies and aggregation behaviors of these polymers are studied by AFM and TEM measurements.

Novel bioactive nanospheres show effective antibacterial effect against multiple endodontic pathogens.

Aim: The current study evaluated the antibacterial activity of a newly developed quaternary ammonium polymethacrylate (QAPM)-containing bioactive glasses (BGs) via a two-step method by our group, namely BGs-HAEMB, and explored its cytotoxicity and biocompatibility. Methods: The antibacterial effects of the BGs-HAEMB against planktonic bacteria, bacterial biofilm formation, and experimental root canal biofilms of persistent pathogens (Enterococcus faecalis, Streptococcus sanguis and Porphyromonas endodontalis) associated with endodontic infection were evaluated in vitro by agar diffusion tests, direct contact tests and live/dead staining. The cytotoxicity and biocompatibility of BGs-HAEMB were evaluated by CCK-8 assays in vitro and a skin implantation model in vivo. Results: Compared to three clinically used endodontic sealers (Endofill, AH Plus, and iRoot SP), BGs-HAEMB exhibited the relatively strongest antibacterial effect against E. faecalis, S. sanguis and P. endodontalis after sitting for 14 and 28 days (P < 0.01). SEM images and CLSM images also showed that for each tested bacteria, BGs-HAEMB killed the most microorganism among all the experimental groups, regardless of treatment for 7 days or 28 days (P < 0.05). Besides, the BGs-HAEMB-treated groups showed a relatively low cytotoxicity (RGRs ranging from 88.6% to 102.9%) after 1, 3, and 7 days of exposure. Meanwhile, after 28 days of implantation, the inflammatory grade in BGs-HAEMB treated group was assessed as Grade I, in which the average numbers of inflammatory cells (6.7 ± 2.1) were less than 25. Conclusions: BGs-HAEMB exerted a long-term and stable antibacterial effect. The remarkable biocompatibility of BGs-HAEMB in vitro and in vivo confirmed its possible clinical application as a potential alternative in the development of the next generation of endodontic sealers.

Facile synthesis of thiol-functionalized long-chain highly branched ROMP polymers and surface-decorated with gold nanoparticles.

The synthesis of thiol-functionalized long-chain highly branched polymers (LCHBPs) has been accomplished in combination of ring-opening metathesis polymerization (ROMP) and thiol-Michael addition click reaction. A monotelechelic polymer with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis-olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as an ABn -type macromonomer in subsequent thiol-ene reaction between acrylate and thiol, yielding LCHBPs as the reaction time prolonged. Au nanoparticles are then covalently conjugated onto the surface of thiol-functionalized LCHBP to fabricate novel hybrid nanostructures, which is shown as one interesting application of such functionalized metathesis polymers. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities.

Profiling long noncoding RNA alterations during the stromal cell-derived factor-1α-induced odontogenic differentiation of human dental pulp stem cells.

OBJECTIVE: The purpose of this study was to investigate the differential expression of long noncoding RNAs (lncRNAs) in dental pulp stem cells (DPSCs) after stromal cell-derived factor-1α (SDF-1α) induction and to explore the lncRNAs that regulate the odontogenic differentiation and migration of DPSCs. DESIGN: We examined the altered expression of lncRNAs in DPSCs after SDF-1α induction by performing lncRNA microarray and qRT-PCR analyses. Moreover, a bioinformatics analysis was conducted to predict the interactions of lncRNAs and identify core regulatory factors. A small interfering RNA (siRNA) was used to knock down lncRNA AC080037.1 expression in DPSCs. Cell transmigration assays, alizarin red staining, qRT-PCR and Western blotting were performed to detect the expression of osteo/dentinogenic differentiation markers or Rho GTPase after lncRNA knockdown in DPSCs. RESULTS: The microarray analysis identified 206 differentially expressed lncRNAs at 7 days after treatment. One lncRNA, AC080037.1, was shown to regulate the odontogenic differentiation of DPSCs. An siRNA targeting lncRNA AC080037.1 suppressed DPSCs migration and the expression of Rho GTPase induced by SDF-1α. Moreover, AC080037.1 knockdown significantly affected mineralized nodule formation and substantially suppressed runt-related factor-2 (RUNX-2), dentin matrix protein-1 (DMP-1) and dentin sialophosphoprotein (DSPP) expression in DPSCs. CONCLUSIONS: Our results revealed the differential expression of lncRNAs in DPSCs before and after SDF-1α induction. Furthermore, we highlighted the significant involvement of one lncRNA, AC080037.1, in the positive regulation of the osteo/odontogenic differentiation of DPSCs and indicated that this lncRNA might be a potential target in regenerative endodontics. These findings may further advance translational studies of pulp engineering.

[Biomechanical effect on adjacent vertebra after percutaneous kyphoplasty with cement leakage into disc: a finite element analysis of thoracolumbar osteoporotic vertebral compression fracture].

OBJECTIVE: To explore the biomechanical effects on adjacent vertebra of thoracolumbar osteoporotic vertebral compression fracture (OVCF) after percutaneous kyphoplasty (PKP) with cement leakage into the disc by using finite element analysis. METHODS: T10-L2 segment data were obtained from computed tomography (CT) scans of an elder female with single T12 OVCF undergoing a cement leakage into the T12-L1 disc after PKP. A three-dimensional finite element Model of thoracolumbar spine (T10-L2) was built in the Mimics and the ABAQUS software. The stress on annulus fiber, nucleus pulposus, endplate and facet joints under axial pressure (0.3, 1.0, 4.0 MPa) were analyzed. RESULTS: The 3D finite element after percutaneous kyphoplasty (PKP) with cement leakage into the disc may be strongly related with the changes of biomechanical effects on adjacent vertebra of thoracolumbar OVCF. Models of thoracolumbar OVCF before and after PVP with a cement leakage into the T12-L1 disc were successfully established. The stresses increased with a rising axial pressure in the model of cement leakage into the disc after PVP, the stress augmentation scope on adjacent end plates(T11 low plate & L1 top plate) and intervertebral disc (T11-12 & T12-L1) increased. The maximal Von Mises stress on adjacent vertebra (T11 & L1) increased while but the maximal Von Mises stress on end vertebra (T10 & L2) decreased. CONCLUSION: Postoperative adjacent vertebral fracture.

Self-Assembled Photonic Microsensors with Strong Aggregation-Induced Emission for Ultra-Trace Quantitative Detection.

Ultratrace quantitative detection based on fluorescence is highly desirable for many important applications such as environmental monitoring or disease diagnosis, which however has remained a great challenge because of limited and irregular fluorescence responses to analytes at ultralow concentrations. Herein the problem is circumvented via local enrichment and detection of analytes within a microsensor, that is, photonic porous microspheres grafted with aggregation-induced emission gens (AIEgens). The obtained microspheres exhibit dual structural and molecular functions, namely, bright structural colors and strong fluorescence. Large fluorescence quenching induced by nitrophenol compounds in an aqueous environment is observed at ultralow concentrations (10-12-10-8 mol/L), enabling quantitative detection at a ppb level (ng/L). This is achieved within a porous structure with good connectivity between the nanopores to improve analyte diffusion, an internal layer of poly(ethylene oxide) (PEO) for analyte enrichment via hydrogen bonding, and homogeneous distribution of AIEgens within the PEO layer for enhanced fluorescence quenching. The fluorescent porous microspheres can be readily obtained in a single step templated by well-ordered water-in-oil-in-water double emulsion droplets with AIE amphiphilic bottlebrush block copolymers as the effective stabilizer.

Inhibitive effect of cremophor RH40 or tween 80-based self-microemulsiflying drug delivery system on cytochrome P450 3A enzymes in murine hepatocytes.

This study examined the effect of self-microemulsiflying drug delivery system (SMEDDS) containing Cremophor RH40 or Tween 80 at various dilutions on cytochrome P450 3A (CYP3A) enzymes in rat hepatocytes, with midazolam serving as a CYP3A substrate. The particle size and zeta potential of microemulsions were evaluated upon dilution with aqueous medium. In vitro release was detected by a dialysis method in reverse. The effects of SMEDDS at different dilutions and surfactants at different concentrations on the metabolism of MDZ were investigated in murine hepatocytes. The cytotoxicity of SMEDDS at different dilutions was measured by LDH release and MTT technique. The effects of SMEDDS on the CYP3A enzymes activity were determined by Western blotting. Our results showed that dilution had less effect on the particle size and zeta potential in the range from 1:25 to 1:500. The MDZ was completely released in 10 h. A significant decrease in the formation of 1'-OH-MDZ in rat hepatocytes was observed after treatment with both SMEDDS at dilutions ranging from 1:50 to 1:250 and Cremophor RH 40 or Tween 80 at concentrations ranging from 0.1% to 1% (w/v), with no cytotoxicity observed. A significant decrease in CYP3A protein expression was observed in cells by Western blotting in the presence of either Cremophor RH40 or Tween 80-based SMEDDS at the dilutions ranging from 1:50 to 1:250. This study suggested that the excipient inhibitor-based formulation is a potential protective platform for decreasing metabolism of sensitive drugs that are CYP3A substrates.

[A structural mechanics study with human maxillary premolar].

OBJECTIVE: To evaluate the stress distribution and offset of dental and periodontal tissues imposed by changes in inner diameter of pulp cavity. METHODS: Six models of maxillary second bicuspid tooth with different inner diameter of pulp cavity were established, including: (1) calcificated pulp without pulp chamberi (2) mostly calcificated pulp chamber with inward reduction of 0. 5 mm in normal pulp cavity; (3) initially calcificated pulp chamber with inward reduction of 0.25 mm in normal pulp cavity; (4) normal pulp cavity; (5) initially absorbed pulp chamber with outward expansion of 0.25 mm in normal pulp cavity; (6) mostly absorbed pulp chamber with outward expansion of 0.5 mm in normal pulp cavity. Vertical and oblique forces with 160 N were loaded on the central fossa, respectively, in order to calculate the stress distribution of dental and periodontal tissues and the maximum incipient offset of the teeth. RESULTS: With loaded vertical and oblique forces on central fossa, increased stress distribution of periodontal tissues and maximum incipient offset of teeth were found in all of the models, which increased with the increase of pulp cavity. CONCLUSION: The change in inner diameter of pulp cavity has an impact on the stress distribution of periodontal tissues and maximum incipient offset of the second upper bicuspid teeth.

The effect of oestrogen on mandibular condylar cartilage via hypoxia-inducible factor-2α during osteoarthritis development.

Oestrogen and hypoxia inducible factor-2α (HIF2α) are key regulators in the pathogenesis of osteoarthritis (OA). However, the cellular interaction between oestrogen and HIF2α in articular cartilage during OA process remains unknown. Our previous study has revealed that high-physiological level of oestrogen aggravates the degradation of condylar cartilage in the early stage of temporomandibular joint osteoarthritis (TMJ OA). Here, we hypothesize that HIF2α involves the effect of oestrogen on mandibular condylar cartilage in the progression of TMJ OA. Our experiment in vivo found that the degeneration of condylar cartilage caused by unilateral anterior crossbite (UAC) model, characterized by obvious degenerative morphology, loss of cartilage extracellular matrix, up-regulation of TNF-α, HIF2α and its' down-stream OA-related cytokines (MMP-13, VEGF and Col X), could be alleviated by lack of oestrogen while aggravated by high level of oestrogen in rats. Meanwhile, our in vitro study found that 17ß-estradiol stimulation resulted in the loss of extracellular matrix, increased expression of TNF-α, IL-1, HIF2α and its' down-stream OA-related cytokines (MMP-13, VEGF and Col X) in primary condylar chondrocytes via oestrogen receptor beta (ERß), which could be reversed by ER antagonist, selective estrogen receptor modulators (SERMs) and HIF2α translation inhibitor. Our results reveal that high level of oestrogen can aggravate the degenerative changes of mandibular condylar cartilage, while lack of oestrogen can alleviate it via oestrogen-ERß-HIF2α pathway during TMJ OA progression.

Adsorption behavior of three triazole fungicides on polystyrene microplastics.

Environmental pollution caused by microplastics (MPs) and pesticides has become a global challenge, and increasing evidence shows that MPs can adsorb organic pollutants which may affect their distribution and bioavailability. As widely used pesticides, triazole fungicides with potential environmental and human safety risks often coexist with MPs in the environment. Understanding the adsorption behavior is the basis of risk assessment of co-exposure of MPs and triazole fungicides. In this study, the adsorption behavior of three commonly used triazole fungicides on polystyrene (PS) was studied using adsorption test. The influences of PS particle size and environmental factors on adsorption capacity were evaluated, and the adsorption mechanisms were discussed. Results suggested that the adsorption kinetics and isotherm conformed to the Pseudo-second-order and Freundlich model, respectively. The order of adsorption and desorption capacity was hexaconazole (HEX) > myclobutanil (MYC) > triadimenol (TRI), which was positively correlated with LogKow of pesticides. To a certain extent, the decrease in PS particle size and change in solution pH value and increase in salt ion strength all contribute to increasing adsorption capacity. The main mechanisms of adsorption were hydrophobic and electrostatic interactions. MPs can adsorb and may become the source and sink of triazole fungicides in aqueous environments. Our results demonstrate that more attention should be given to the combined water pollution risk of MPs and triazoles fungicides.

The Clinical and Epidemiological Study of Children with Hand, Foot, and Mouth Disease in Hunan, China from 2013 to 2017.

Hand, foot, and mouth disease (HFMD) is endemic in the Pacific region, especially in mainland China. The case-fatality ratio of HFMD is increasing steadily. Knowledge of the changing epidemiology of HFMD in different regions is necessary for implementing appropriate intervention strategies. In this study, we describe the clinical and epidemiological characteristics of HFMD in Hunan Children's Hospital between 2013 and 2017. A total of 7203 patients with HFMD were admitted, with complication and mortality rates of 35.62% and 0.78%, respectively. The total number of children with HFMD, proportion of severely ill children, and HFMD mortality rate were the highest in 2014. The number of cases caused by EV-A71 and CV-A16 decreased continuously, while the number of cases caused by 'other enteroviruses' increased yearly since 2014, suggesting that other enteric viruses will gradually replace EV-A71 and CV-A16 as the main pathogenic HFMD agents. Furthermore, EV-A71 and mixed infections accounted for the high case fatality rates in children with severe HFMD, among whom EV-A71 infection resulted in the highest complication and mortality rates; the mild form of the disease was dominated by 'other enteroviruses'. In conclusion, the changing etiological pattern highlights the need to improve pathogen surveillance and vaccine strategies for HFMD control.

Corrosion resistance and antibacterial activity of zinc-loaded montmorillonite coatings on biodegradable magnesium alloy AZ31.

A Zinc-loaded montmorillonite (Zn-MMT) coating was hydrothermally prepared using Zn2+ ion intercalated sodium montmorillonite (Na-MMT) upon magnesium (Mg) alloy AZ31 as bone repairing materials. Biodegradation rate of the Mg-based materials was studied via potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS) and hydrogen evolution tests. Results revealed that both Na-MMT and Zn-MMT coatings exhibited better corrosion resistance in Dulbecco's modified eagle medium (DMEM) + 10% calf serum (CS) than bare Mg alloy AZ31 counterparts. Hemolysis results demonstrated that hemocompatibility of the Na-MMT and Zn-MMT coatings were 5%, and lower than that of uncoated Mg alloy AZ31 pieces. In vitro MTT tests and live-dead stain of osteoblast cells (MC3T3-E1) indicated a significant improvement in cytocompatibility of both Na-MMT and Zn-MMT coatings. Antibacterial properties of two representative bacterial strains associated with device-related infection, i.e. Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), were employed to explore the antibacterial behavior of the coatings. The measured inhibitory zone and bacterial growth rate confirmed that Zn-MMT coatings exhibited higher suppression toward both E. coli and S. aureus than that of Na-MMT coatings. The investigation on antibacterial mechanism through scanning electron microscopy (SEM) and lactate dehydrogenase (LDH) release assay manifested that Zn-MMT coating led to severe breakage of bacterial membrane of E. coli and S. aureus, which resulted in a release of cytoplasmic materials from the bacterial cells. In addition, the good inhibition of Zn-MMT coatings against E. coli and S. aureus might be attributed to the slow but sustainable release of Zn2+ ions (up to 144 h) from the coatings into the culture media. This study provides a novel coating strategy for manufacturing biodegradable Mg alloys with good corrosion resistance, biocompatibility and antibacterial activity for future orthopedic applications. STATEMENT OF SIGNIFICANCE: The significance of the current work is to develop a corrosion-resistant and antibacterial Zn-MMT coating on magnesium alloy AZ31 through a hydrothermal method. The Zn-MMT coating on magnesium alloy AZ31 shows better corrosion resistance, biocompatibility and excellent antibacterial ability than magnesium alloy AZ31. This study provides a novel coating on Mg alloys for future orthopedic applications.