Citrate cross-linked gels with strain reversibility and viscoelastic behavior accelerate healing of osteochondral defects in a rabbit model.

Most living tissues are viscoelastic in nature. Self-repair due to the dissipation of energy by reversible bonds prevents the rupture of the molecular backbone in these tissues. Recent studies, therefore, have aimed to synthesize biomaterials that approximate the mechanical performance of biological materials with self-recovery properties. We report an environmentally friendly method for the development of ionotropically cross-linked viscoelastic chitosan gels with a modulus comparable to that of living tissues. The strain recovery property was found to be highest for the gels with the lowest cross-linking density. The force-displacement curve showed significant hysteresis due to the presence of reversible bonds in the cross-linked gels. Nanoindentation studies demonstrated the creep phenomenon for the cross-linked chitosan gels. Creep, hysteresis, and plasticity index confirmed the viscoelastic behavior of the cross-linked gels. The viscoelastic gels were implanted at osteochondral defect sites to assess the tissue regeneration ability. In vivo results demonstrated early cartilage formation and woven bone deposition for defects filled with the gels compared to nontreated defects.

Treatment of monogenic and digenic dominant genetic hearing loss by CRISPR-Cas9 ribonucleoprotein delivery in vivo.

Mutations in Atp2b2, an outer hair cell gene, cause dominant hearing loss in humans. Using a mouse model Atp2b2Obl/+, with a dominant hearing loss mutation (Oblivion), we show that liposome-mediated in vivo delivery of CRISPR-Cas9 ribonucleoprotein complexes leads to specific editing of the Obl allele. Large deletions encompassing the Obl locus and indels were identified as the result of editing. In vivo genome editing promotes outer hair cell survival and restores their function, leading to hearing recovery. We further show that in a double-dominant mutant mouse model, in which the Tmc1 Beethoven mutation and the Atp2b2 Oblivion mutation cause digenic genetic hearing loss, Cas9/sgRNA delivery targeting both mutations leads to partial hearing recovery. These findings suggest that liposome-RNP delivery can be used as a strategy to recover hearing with dominant mutations in OHC genes and with digenic mutations in the auditory hair cells, potentially expanding therapeutics of gene editing to treat hearing loss.

Microsphere embedded hydrogel construct - binary delivery of alendronate and BMP-2 for superior bone regeneration.

Biomimetic delivery of osteoinductive growth factors via an osteoconductive matrix is an interesting approach for stimulating bone regeneration. In this context, the bone extracellular matrix (ECM) has been explored as an optimal delivery system, since it releases growth factors in a spatiotemporal manner from the matrix. However, a bone ECM hydrogel alone is weak, unstable, and prone to microbial contamination and also has been reported to have significantly reduced bone morphogenic protein-2 (BMP-2) post decellularization. In the present work, a microsphere embedded osteoinductive decellularized bone ECM/oleoyl chitosan based hydrogel construct (BOC) was developed as a matrix allowing dual delivery of an anti-resorptive drug (alendronate, ALN, via the microspheres) and BMP-2 (via the hydrogel) for a focal tibial defect in a rabbit model. The synthesized gelatin microspheres (GMs) were spherical in shape with diameter ∼32 µm as assessed by SEM analysis. The BOC construct showed sustained release of ALN and BMP-2 under the studied conditions. Interestingly, amniotic membrane-derived stem cells (HAMSCs) cultivated on the hydrogel construct demonstrated excellent biocompatibility, cell viability, and active proliferation potential. Additionally, cell differentiation on the constructs showed an elevated expression of osteogenic genes in an RT-PCR study along with enhanced mineralized matrix deposition as demonstrated by alkaline phosphatase (ALP) assay and alizarin red assay. The hydrogel construct was witnessed to have improved neo-vascularization potential in a chick chorioalantoic membrane (CAM) assay. Also, histological and computed tomographic findings evidenced enhanced bone regeneration in the group treated with the BOC/ALN/BMP hydrogel construct in a rabbit tibial defect model. To conclude, the developed multifunctional hydrogel construct acts as an osteoinductive and osteoconductive platform facilitating controlled delivery of ALN and BMP-2, essential for stimulating bone tissue regeneration.

Bioinspired 3D porous human placental derived extracellular matrix/silk fibroin sponges for accelerated bone regeneration.

Critical bone defects arising from traumatic injury and diseases are of major health concern since they are unable to heal spontaneously without clinical intervention. In this context, bone tissue engineering provides an attractive approach to treat bone defects by providing a bioactive template which has the potential to guide osseous tissue regeneration. In this study, porous hybrid placental extracellular matrix sponge (PIMS) was fabricated by a combinatorial method using silk fibroin (SF)/placental derived extracellular matrix and subsequently evaluated its efficacy towards bone tissue regeneration. The presence of intrinsic growth factors was evidenced by immunoblotting of the extracted proteins derived from the placental derived extracellular matrix. This growth factor rich PIMS lends a unique bioactive scaffolding to human amniotic mesenchymal stem cells (HAMSCs) which supported enhanced proliferation as well as superior osteogenic differentiation. Gene expression studies demonstrated significant up-regulation of osteogenic related genes in the PIMS group. PIMS when implanted in the chick chorioallantoic membrane, significantly attracted allantoic vessels revealing its potential to stimulate angiogenesis ex vivo. Furthermore, no severe immune response to the host was observed on subcutaneous implantation of PIMS in vivo. Instead, it supported the formation of blood vessels, revealing its outstanding biocompatibility. Additionally, critical tibial defects treated with PIMS demonstrated higher bone volume after six weeks when analyzed by micro-CT, which was accompanied by high mineral density. Histological and immunofluorescence studies validated the results and revealed enhanced osseous tissue regeneration after six weeks of surgery. All these findings recapitulated that the growth factors incorporated bioactive PIMS could perform as an appropriate matrix for osteogenic differentiation and efficient bone regeneration.

Impact of styrene maleic anhydride (SMA) based hydrogel on rat fallopian tube as contraceptive implant with selective antimicrobial property.

Development of non-hormonal female contraception is a need to combat against increasing population growth. The presently available short term or long term female contraceptives and sterilization methods have their own restrictions and side effects. With this objective, herein, we describe an innovative insight about the use of hydrogel formulation consisting of Styrene Maleic Anhydride (SMA) dissolved in Dimethyl Sulfoxide (DMSO) as non-hormonal fallopian tube contraceptive implant. Firstly, in vitro behavior of SMA hydrogel was evaluated by in vitro swelling and rheological properties to comprehend the polymeric hydrogel property post implantation inside the fallopian tube. Simulated Uterine Fluid (SUF) was used to simulate female reproductive tract environment in this study. Mechanical strength of the hydrogel when subjected to dynamic environment post implantation in the fallopian tube was estimated by the G' values demonstrated. SMA hydrogel expressed selective antimicrobial activity against opportunistic pathogens (Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus) while having limited consequence over the growth of Lactobacillus spp. After confirmation of cytocompatibility against primary rat endometrial cell lines, the polymeric hydrogel was implanted inside the uterine horns of Sprague-Dawley rats. In vivo biocompatibility of the hydrogel was confirmed by histological and immunohistochemical evaluation of uterine tissue sections. Hematology, blood biochemistry and organ toxicity (kidney, liver, spleen, lungs and heart) also revealed biocompatibility of SMA hydrogel. The results of the current study indicated that the SMA copolymer dissolved in DMSO to form hydrogel has excellent biocompatibility for application as female contraceptive gel which can be implanted in the fallopian tube.

Simultaneous hydrothermal bioactivation with nano-topographic modulation of porous titanium alloys towards enhanced osteogenic and antimicrobial responses.

Post-implantation failure associated with insufficient host tissue integration at the bone-implant interface and aseptic loosening is a major concern in orthopaedics as well as in dentistry. To overcome the failure in early stages of implantation, prosthetic design combining the mechanisms of porosity guided bone ingrowth along with topographic manipulation of osteogenic cells over bacterial colonization would be an ideal choice, although achieving such a goal is highly challenging. In this study, facile rapid hydrothermal synthesis of nanostructures with simultaneous deposition of hydroxyapatite on the titanium alloy surface was demonstrated by using an aqueous sodium tripolyphosphate and calcium hydroxide mixture. Nanostructures with wire-like morphology exhibited significantly higher osteogenic related gene expression (COL I, OPN, and OCN) through differentiation of adipose derived mesenchymal stem cells as well as the bactericidal response against S. aureus and E. coli as compared to other nanotopographic features. The same also exhibited elongated cell morphology with the highest expression of paxillin towards cell boundaries as compared to the polished surface with flattened cell morphology and localized expression of paxillin around the nucleus. Implantation of treated porous Ti6Al4V samples representing a multiscalar hierarchy with wire-like nanostructures accelerated osteochondral healing in rabbits without any major signs of infection. Also, significantly higher bone formation was observed within the defects implanted with treated porous Ti6Al4V (44.0%) as compared to that of untreated porous samples (36.9%) as well as empty defects (19.6%).

Biocompatible nanogel derived from functionalized dextrin for targeted delivery of doxorubicin hydrochloride to MG 63 cancer cells.

The present article demonstrates the targeted delivery of doxorubicin hydrochloride to human osteosarcoma cancer cell lines (MG 63) using functionalized dextrin based crosslinked, pH responsive and biocompatible nanogel. The nanogel has been prepared through Michael-type addition reaction using dextrin (Dxt), N, N'-methylene bisacrylamide (MBA, as crosslinker), acrylic acid (AA, as monomer) and potassium persulfate (KPS, as initiator). The structure, composition, morphology of the nanogel have been explored using FTIR and 1H NMR spectroscopy, XRD, TGA, DSC, CHN and AFM analyses. The TEM analysis confirmed that the size of nanogel appeared within 100nm, while DLS study indicates that the diameter of the nanogel remained between 113 and 126nm. The AFM study implied the porous morphology of the synthesized nanogel. The rheological study suggests the gel behaviour of the synthesized nanogel at 37±0.1°C. Difference in% swelling at pH 5.5 and 7.4 indicates pH-responsiveness of the nanogel. The in vitro cytocompatibility results ascertained that the nanogel is non-toxic to human mesenchymal stem cells (hMSCs). In vitro cellular uptake study confirmed that FITC-loaded nanogel can cross the cellular membrane and be well uptake by the cell cytoplasm. The nanogel could efficiently encapsulate doxorubicin hydrochloride (Dox) with the loading efficiency of 27±0.2% after 72h. The Dox-loaded nanogel demonstrates anti-cancer activity towards MG 63 cancer cells and release the encapsulated drug in a controlled way.

Influence of Porosity and Pore-Size Distribution in Ti6Al4 V Foam on Physicomechanical Properties, Osteogenesis, and Quantitative Validation of Bone Ingrowth by Micro-Computed Tomography.

Cementless fixation for orthopedic implants aims to obviate challenges associated with bone cement, providing long-term stability of bone prostheses after implantation. The application of porous titanium and its alloy-based implants is emerging for load-bearing applications due to their high specific strength, low stiffness, corrosion resistance, and superior osteoconductivity. In this study, coagulant-assisted foaming was utilized for the fabrication of porous Ti6Al4 V using egg-white foam. Samples with three different porosities of 68.3%, 75.4%, and 83.1% and average pore sizes of 92, 178, and 297 µm, respectively, were prepared and subsequently characterized for mechanical properties, osteogenesis, and tissue ingrowth. A microstructure-mechanical properties relationship study revealed that an increase of porosity from 68.3 to 83.1% increased the average pore size from 92 to 297 µm with the subsequent reduction of compresive strength by 85% and modulus by 90%. Samples with 75.4% porosity and a 178 µm average pore size produced signifcant osteogenic effects on human mesenchymal stem cells, which was further supported by immunocytochemistry and real-time polymerase chain reaction data. Quantitative assessment of bone ingrowth by micro-computed tomography revealed that there was an approximately 52% higher bone formation and more than 90% higher bone penetration at the center of femoral defects in rabbit when implanted with Ti6Al4 V foam (75.4% porosity) compared to the empty defects after 12 weeks. Hematoxylin and eosin (H&E) and Masson trichrome (MT) staining along with energy-dispersive X-ray mapping on the sections obtained from the retrieved bone samples support bone ingrowth into the implanted region.

Accelerated healing of full thickness dermal wounds by macroporous waterborne polyurethane-chitosan hydrogel scaffolds.

Wound healing is a dynamic process wherein cells, and macromolecules work in consonance to facilitate tissue regeneration and restore tissue integrity. In the case of full-thickness (FT) wounds, healing requires additional support from native or synthetic matrices to aid tissue regeneration. In particular, a matrix with optimum hydrophilic-hydrophobic balance which will undergo adequate swelling as well as reduce bacterial adhesion has remained elusive. In the present study, polyurethane diol dispersion (PUD) and the anti-bacterial chitosan (Chn) were blended in different ratios which self-organized to form macroporous hydrogel scaffolds (MHS) at room temperature on drying. SEM and AFM micrographs revealed the macroporosity on top and fracture surfaces of the MHS. FTIR spectra revealed the intermolecular as well as intra-molecular hydrogen bonding interactions between the two polymers responsible for phase separation, which was also observed by micrographs of blend solutions during the drying process. The effect of phase separation on mechanical properties and in vitro degradation (hydrolytic, enzymatic and pH dependent) of MHS were studied and found to be suitable for wound healing. In vitro cytocompatibility was demonstrated by the proliferation of primary rat fibroblast cells on MHS. Selected MHS was subjected to in vivo FT wound healing study in Wistar rats and compared with an analogous polyurethane containing commercial dressing i.e. Tegaderm™. The MHS-treated wounds demonstrated accelerated healing with increased wound contraction, higher collagen synthesis, and vascularization in wound area compared to Tegaderm™. Thus, it is concluded that the developed MHS is a promising candidate for application as FT wound healing dressings.

Covalent cross-links in polyampholytic chitosan fibers enhances bone regeneration in a rabbit model.

Chitosan fibers were prepared in citric acid bath, pH 7.4 and NaOH solution at pH 13, to form ionotropically cross-linked and uncross-linked fibers, respectively. The fibers formed in citric acid bath were further cross-linked via carbodiimide chemistry; wherein the pendant carboxyl moieties of citric acid were used for new amide bond formation. Moreover, upon covalent cross-linking in the ionically gelled citrate-chitosan fibers, incomplete conversion of the ion pairs to amide linkages took place resulting in the formation of a dual network structure. The dual cross-linked fibers displayed improved mechanical property, higher stability against enzymatic degradation, hydrophobicity and superior bio-mineralization compared to the uncross-linked and native citrate cross-linked fibers. Additionally, upon cyclic loading, the ion pairs in the dual cross-linked fibers dissociated by dissipating energy and reformed during the relaxation period. The twin property of elasticity and energy dissipation mechanism makes the dual cross-linked fiber unique under dynamic mechanical conditions. The differences in the physico-chemical characteristics were reflected in protein adsorption, which in turn influenced the cellular activities on the fibers. Compared to the uncross-linked and ionotropically cross-linked fibers, the dual cross-linked fibers demonstrated higher proliferation and osteogenic differentiation of the MSCs in vitro as well as better osseous tissue regeneration in a rabbit model.