Cold processed oil-in-water emulsions for dermatological purpose: formulation design and structure analysis.

The aim of this work is to develop, optimize and characterize cold process emulsions that are stable at acidic pH. The main surfactant was selected according to the hydrophilic lipophilic balance (HLB) concept and surface tension, whereas polymers were selected by viscoelastic measurements and analytical centrifugation. It was showed that the inclusion of methyl vinyl ether/maleic anhydride copolymer crosslinked with decadiene (PVM/MA) increased the storage modulus (G') of the gels (23.9-42.1 Pa) two-fold and the droplet migration decreased from 3.66% to 0.95%/h. Cetrimide was selected as a preservative based on its microbiological results and additional contribution to the stability of the emulsions. Four emulsions were developed that differed by the co-emulsifier used (PEG-20 glyceril laurate and polyglyceryl-4-isostearate) and the glycol (2-methyl-2,4-pentanediol and ethoxydiglycol). Viscoelastic measurements and droplet size/microscopic analysis showed that the structure of PEG-20 glyceril laurate emulsion (η' = 76.0 Pa.s at 0.01 Hz and 32.9 ± 3.7 µm, respectively) was stronger compared to polyglyceryl-4-isostearate (η' = 37.4 Pa.s at 0.01 Hz and 37.8 ± 15.7 µm, respectively). Differential scanning calorimetry (DSC) results were in accordance with the latter and showed that PEG-20 glyceril laurate with 2-methyl-2,4-pentanediol corresponded to the strongest structure (|224.4| W °C g(-1)). This cold process allowed a total production savings of more than 17% when compared to the traditional hot process.

Mometasone furoate hydrogel for scalp use: in vitro and in vivo evaluation.

Dermatological inflammatory diseases often affect the scalp and the eyebrows. Common dosage forms available on the market for those situations are lotions; however, the presence of hair limits their use. Gels, for their consistency and adhesiveness, are a suitable alternative to the lotions in these situations. The aim of this study was to develop a new stable gel containing mometasone furoate (MF), with anti-inflammatory activity and a controlled delivery, to improve topical treatment of scalp dermatitis. Pharmaceutical development, physical and chemical characterization, stability, in vitro release and permeation studies and in vivo anti-inflammatory activity were performed. The gel presented an acidic pH and an apparent viscosity of 35 Pa.s. The microbiological analysis showed that the results were within the established specification limits. The release and the permeation profiles suggest that the drug is mainly retained in the upper skin layers. MF gel was tested in an animal model of cutaneous inflammation and presented similar anti-inflammatory activity compared to a commercially available MF dosage form. The gel was chemically, physically and microbiologically stable. The results suggest that the developed hydrogel formulation containing MF can be of actual value for improving the clinical effectiveness in the treatment of scalp dermatitis.

New Polyurethane Nail Lacquers for the Delivery of Terbinafine: Formulation and Antifungal Activity Evaluation.

Onychomycosis is a fungal nail infection. The development of new topical antifungal agents for the treatment of onychomycosis has focused on formulation enhancements that optimize the pharmacological characteristics required for its effective treatment. Polyurethanes (PUs) have never been used in therapeutic nail lacquers. The aim of this work has been the development of new PU-based nail lacquers with antifungal activity containing 1.0% (wt/wt) of terbinafine hydrochloride. The biocompatibility, wettability, and the prediction of the free volume in the polymeric matrix were assessed using a human keratinocytes cell line, contact angle, and Positron Annihilation Lifetime Spectroscopy determinations, respectively. The morphology of the films obtained was confirmed by scanning electron microscopy, while the nail lacquers' bioadhesion to nails was determined by mechanical tests. Viscosity, in vitro release profiles, and antifungal activity were also assessed. This study demonstrated that PU-terbinafine-based nail lacquers have good keratinocyte compatibility, good wettability properties, and adequate free volume. They formed a homogenous film after application, with suitable adhesion to the nail plate. Furthermore, the antifungal test results demonstrated that the terbinafine released from the nail lacquer Formulation A PU 19 showed activity against dermatophytes, namely Trichophyton rubrum.

In vivo delivery of peptides and Toll-like receptor ligands by mannose-functionalized polymeric nanoparticles induces prophylactic and therapeutic anti-tumor immune responses in a melanoma model.

We hypothesized that the co-entrapment of melanoma-associated antigens and the Toll-like receptor (TLR) ligands Poly(I:C) and CpG, known to be Th1-immunopotentiators, in mannose-functionalized aliphatic polyester-based nanoparticles (NPs) could be targeted to mannose receptors on antigen-presenting cells and induce anti-tumor immune responses. High entrapment efficiencies of antigens and immunopotentiators in 150nm NPs were obtained. The co-entrapment of the model antigen ovalbumin and the TLR ligands was crucial to induce high IgG2c/IgG1 ratios and high levels of IFN-γ and IL-2. Mannose-functionalization of NPs potentiated the Th1 immune response. The nanoparticulate vaccines decreased the growth rate of murine B16F10 melanoma tumors in therapeutic and prophylatic settings. The combination of mannose-functionalized NPs containing MHC class I- or class II-restricted melanoma antigens and the TLR ligands induced the highest tumor growth delay. Overall, we demonstrate that the multifunctional properties of NPs in terms of targeting and antigen/adjuvant delivery have high cancer immunotherapeutic potential.

In vitro and in vivo topical delivery studies of tretinoin-loaded ultradeformable vesicles.

INTRODUCTION: Ultradeformable vesicles are highly promising tools to enhance the percutaneous transport of different drugs such as tretinoin across the skin barrier and also to increase the formulation stability at absorption site and reduce the drug induced irritation. METHODS: Topical delivery of tretinoin-loaded ultradeformable vesicles (tretinoin-UDV) was evaluated concerning different studies, such as: the release and permeation profiles (tape stripping); skin penetration (fluorescence analysis); induced electrical changes in skin barrier properties; cytotoxicity (Trypan Blue assay) and skin irritation in in vivo conditions (Draize test). The novel formulation performance was also compared to a commercial tretinoin formulation regarding in vivo studies. RESULTS: It was obtained a sustained and controlled drug release, as expected for UDV formulation. In addition, a dermal delivery was observed regarding the permeation study since it was not detected any drug amount in the receptor phase after 24h. Nile Red-UDV stained intensively mostly in the stratum corneum, corroborating the tape stripping results. Tretinoin-UDV decreased skin resistance, suggesting its ability to induce skin barrier disruption. Finally, the formulation vehicle (empty UDV) and tretinoin-UDV were not toxic under in vitro and in vivo conditions, at least, at 5×10(-3)mg/mL and 0.5mg/mL of tretinoin, respectively. CONCLUSION: Tretinoin-UDV is a promising delivery system for tretinoin dermal delivery without promoting skin irritation (unlike other commercial formulations), which is quite advantageous for therapeutic purpose.

Neutron metrology laboratory facility simulation.

The Neutron Low Scattering Laboratory in Brazil has been completely rebuilt. Evaluation of air attenuation parameters and neutron component scattering in the room was done using Monte Carlo simulation code. Neutron fields produced by referenced neutron source were used to calculate neutron scattering and air attenuation.

Development of functionalized nanoparticles for vaccine delivery to dendritic cells: a mechanistic approach.

AIM: Produce biodegradable nanoparticles to target antigen-presenting cells (APCs) and evaluate their potential to be used as a vaccine delivery system. MATERIALS & METHODS: Untargeted PEGylated poly(d,l-lactic-co-glycolide)-based nanoparticles and mannose-grafted nanoparticles were formulated and physicochemically characterized. Immortalized and primary APCs were used to study nanoparticle internalization patterns. The endocytic pathways and intracellular trafficking followed by nanoparticles were also investigated. RESULTS & DISCUSSION: Nanoparticles displayed mannose residues available for binding at the nanoparticle surface. Different nanoparticle internalization patterns by immortalized and primary APCs were verified. Macropinocytosis, clathrin-mediated endocytosis, caveolin- and lipid raft-dependent endocytosis are involved in nanoparticles internalization. Nanoparticles demonstrate both endolysosomal and cytosolic localizations and a tendency to accumulate nearby the endoplasmic reticulum. CONCLUSION: The developed nanoparticles might drive antigens to be presented through MHC class I and II molecules to both CD8(+) and CD4(+) T cells, favoring a complete and coordinated immune response.

Safety assessment and biological effects of a new cold processed SilEmulsion for dermatological purpose.

It is of crucial importance to evaluate the safety profile of the ingredients used in dermatological emulsions. A suitable equilibrium between safety and efficacy is a pivotal concern before the marketing of a dermatological product. The aim was to assess the safety and biological effects of a new cold processed silicone-based emulsion (SilEmulsion). The hazard, exposure, and dose-response assessment were used to characterize the risk for each ingredient. EpiSkin assay and human repeat insult patch tests were performed to compare the theoretical safety assessment to in vitro and in vivo data. The efficacy of the SilEmulsion was studied using biophysical measurements in human volunteers during 21 days. According to the safety assessment of the ingredients, 1,5-pentanediol was an ingredient of special concern since its margin of safety was below the threshold of 100 (36.53). EpiSkin assay showed that the tissue viability after the application of the SilEmulsion was 92 ± 6% and, thus considered nonirritant to the skin. The human studies confirmed that the SilEmulsion was not a skin irritant and did not induce any sensitization on the volunteers, being safe for human use. Moreover, biological effects demonstrated that the SilEmulsion increased both the skin hydration and skin surface lipids.