Benchmarking the Humidity-Dependent Mechanical Response of (Nano)fibrillated Cellulose and Dissolved Polysaccharides as Sustainable Sand Amendments.

Soil quality is one of the main limiting factor in the development of the food sector in arid areas, mainly due to its poor mechanics and lack of water retention. Soil's organic carbon is nearly absent in arid soils, though it is important for water and nutrient transport, to soil mechanics, to prevent erosion, and as a long-term carbon sink. In this study, we evaluate the potential benefits that are brought to inert sand by the incorporation of a range of, mainly, cellulosic networks in their polymeric or structured (fiber) forms, analogously to those found in healthy soils. We explore the impact of a wide range of nonfood polysaccharide-based amendments, including pulp fibers, nanocellulose, cellulose derivatives, and other readily available polysaccharide structures derived from arthropods (chitosan) or fruit peels (pectin) residues. A practical methodology is presented to form sand-polymer composites, which are evaluated for their soil mechanics as a function of humidity and the dynamics of their response to water. The mechanics are correlated to the network of polymers formed within the pores of the sandy soil, as observed by electron microscopy. The response to water is correlated to both the features of the network and the individual polysaccharides' physicochemical features. We expect this work to provide a rapid and reproducible methodology to benchmark sustainable organic amendments for arid soils.

Process-structure-property relationships of cellulose nanocrystals derived from Juncus effusus stems on Ò¡-carrageenan-based bio-nanocomposite films.

This study investigates the potential of Juncus plant fibers as a renewable source for producing cellulose nanocrystals (CNs) to reinforce polymers. Cellulose microfibers (CMFs) were extracted with a 0.43 ± 0.2 µm diameter and 69 % crystallinity through alkaline and bleaching treatments, then subjected to sulfuric acid hydrolysis, yielding four CN types (CN10, CN15, CN20 and CN30) with distinct physico-chemical properties and aspect ratios (47, 55, 57, and 60). The study assessed the influence of cellulose nanocrystals (CNs), incorporated at different weight percentages (3 %, 5 %, and 8 %), on thermal, transparency, and mechanical properties in k-carrageenan (CA) biocomposite films. The results indicate significant enhancements in these characteristics, highlighting good compatibility between CNs and CA matrix. Particularly noteworthy is the observed substantial improvement in tensile strength at an 8 wt% loading, with values of 23.43 ± 0.83 MPa for neat CA, 33.53 ± 0.83 MPa for CA-CN10, 36.67 ± 0.71 MPa for CA-CN15, 37.65 ± 0.56 MPa for CA-CN20, and 39.89 ± 0.77 MPa for CA-CN30 composites. Furthermore, the research explores the connection between the duration of hydrolysis and the properties of cellulose nanocrystals (CNs), unveiling their influence on the characteristics of nanocomposite films. Prolonged hydrolysis enhances CN crystallinity (CrI), aspect ratio, and surface charge content, consequently enhancing mechanical features like strength and flexibility in these films. These findings demonstrate the potential of Juncus plant fibers as a natural and eco-friendly resource for producing CNs that effectively reinforce polymers, making them an attractive option for diverse applications in the field.

Manufacturing of macroporous cellulose monolith from green macroalgae and its application for wastewater treatment.

Enormous interest in using marine biomass as a sustainable resource for water treatment has been manifested over the past few decades. Herein, the objective was to investigate the possible use of green macroalgae (Codium tomentosum) for cellulose-based foam production through a versatile and convenient process. Macroporous cellulose monolith was prepared from cellulose hydrogel using freeze-drying process, resulting in a mechanically rigid monolith with a high swelling ratio. The as-produced spongy-like porous cellulosic material was used as bio-sorbent for wastewater treatment, particularly for removing methylene blue (MB) dye from concentrated aqueous solution. The adsorption capacity of MB was subsequently studied, and the effect of adsorption process parameters was determined in a controlled batch system. From the kinetic studies, it was found that the adsorption equilibrium was reached within 660 min. Furthermore, the analysis of the adsorption kinetics reveals that the data could be fitted by a pseudo-second order model, while the adsorption isotherm could be described by Langmuir isotherm model. The maximum adsorption capacity was found to be 454 mg/g. The findings suggested that the produced cellulose monolith could be used as a sustainable adsorbent for water treatment.

Methylcellulose/lignin biocomposite as an eco-friendly and multifunctional coating material for slow-release fertilizers: Effect on nutrients management and wheat growth.

To obviate adverse effects from the non-biodegradability of certain polymer-based slow-release fertilizers (SRFs) and to offset higher operational costs, the use of biopolymers as coating material has recently caught interest in the research circles. The present work aims to design a sustainable coating material based on biodegradable polymers. To this end, Alfa plant was initially exploited as a viable sustainable source for the extraction of lignin (LGe), which was in turn integrated into the development of a three-dimensional cross-linked network, including methylcellulose (MC) as a matrix and citric acid (CA) as a cross-linking agent. Then, the designed coating material was applied onto Di-ammonium Phosphate (DAP) and Triple Superphosphate (TSP) water-soluble fertilizers in a rotating pan machine. Chemical, physical, and biodegradation studies have confirmed that the coating material is environmentally-friendly. Nutrients release experiments in water as well as in soil environments have proved the effectiveness of the MC and MC/LGe coating layers in delaying the nutrients discharge. Besides, the nutrients release from coated DAP and TSP lasted longer than 30 days. Furthermore, the coating film enhanced the fertilizers mechanical resistance and boosted the soil water retention capacity. The agronomic evaluation has also confirmed their remarkable potential in enhancing wheat leaf area, chlorophyll content and biomass, in addition to the roots architecture and the final fruiting efficiency. These results showed that this hybrid composite could be used as an efficient coating material to produce slow-release fertilizers with multifunctional performances.

Exploration of multifunctional properties of garlic skin derived cellulose nanocrystals and extracts incorporated chitosan biocomposite films for active packaging application.

For many years, garlic has been used as a condiment in food and traditional medicine. However, the garlic skin, which accounts for 25% of the garlic bulk, is considered agricultural waste. In this study, cellulose nanocrystals (CNCs) and garlic extract (GE) from garlic skin were isolated and used as fillers to manufacture biocomposite films. The films were characterized in terms of UV barrier, thermal, mechanical, biodegradability, and antimicrobial activity. The chitosan-containing films and CNCs have significantly improved the films' tensile strength, Young's modulus, and elongation but decreased the film transparency compared to chitosan films. The combination of the CNCs and GE, on the other hand, slightly reduced the mechanical properties. The addition of CNCs slightly decreased the film transparency, while the addition of GE significantly improved the UV barrier properties. Thermal studies revealed that the incorporation of CNC and GE had minimal effect on the thermal stability of the chitosan films. The degradability rate of the chitosan composite films was found to be higher than that of the neat chitosan films. The antimicrobial properties of films were studied against Escherichia coli, Streptomyces griseorubens, Streptomyces alboviridis, and Staphylococcus aureus, observing that their growth was considerably inhibited by the addition of GE in composite films. Films incorporating both CNCs and GE from garlic skin hold more promise for active food packaging applications due to a combination of enhanced physical characteristics and antibacterial activity.

Beneficiation of cactus fruit waste seeds for the production of cellulose nanostructures: Extraction and properties.

Cactus fruit waste seeds (CWS) are a by-product of the cactus fruit processing industry. Until now, CWS are not recoverable in any sector. The valorization of these residues may reduce their volume in the environment and transform them into valuable products. In this work, CWS have been identified for the first time as a sustainable lignocellulosic source. Cellulose microfibers (CMFs) and nanocrystals (CNCs) were successfully produced via alkali and bleaching treatments followed by sulfuric acid hydrolysis. It was found that the extracted CMFs showed an average diameter of 11 µm, crystallinity of 72%, and a yield of 25%. The as-produced CNCs exhibited a needle-like shape with a diameter of 13 ± 3 nm and length of 419 ± 48 nm, giving rise to an aspect ratio of 30.7, with a zeta potential value of - 30 mV and a charge content of sulfate groups of 287.8 mmol·kg-1. Herein, the obtained cellulosic derivatives with excellent properties from this underutilized waste can draw the attention of researchers towards CWS as a new type of biomass with virtually no hemicellulose, which could be of great interest to isolate and study the effects of how lignin interacts with cellulose.