A histological and immunohistochemical study of tissue reactions to solid poly(ortho ester) in rabbits.

In many cases only the temporary presence of a biomaterial is needed in tissue support, augmentation or replacement. In such cases biodegradable materials are better alternatives than biostable ones. At present, biodegradable polymers are widely used in the field of maxillofacial surgery as sutures, fracture fixation devices and as absorbable membranes. The most often used polymers are aliphatic polyesters, such as polyglycolic acid (PGA) and polylactic acid (PLA). Poly(ortho ester) is a surface eroding polymer, which has been under development since 1970, but is used mostly in drug delivery systems in semisolid form. The aim of this study was to evaluate the tissue reactions of solid poly(ortho ester) (POE), histologically and immunohistochemically. Resorption times and the effect of 2 different sterilization methods (gamma radiation and ethylene oxide) upon resorption were also evaluated. Material was implanted into the tibia and subcutaneously into the mandibular ramus area of 24 rabbits. Follow-up times were 1-10, 14 and 24 weeks. Histological studies showed that POE induces a moderate inflammation in soft tissue and in bone. At 24 week follow-up, inflammation was mild in soft tissue and moderate in bone. In immunohistochemical studies, no highly fluorescent layer of tenascin or fibronectin was found adjacent to the implant. Resorption of gamma-sterilized rods was faster than ethylene oxide-sterilized rods. The total resorption time was more than 24 weeks in both groups. Clinically the healing was uneventful and the implants the well tolerated by the living tissue. This encourages these authors to continue studies with this interesting new material to search for the ideal material for bone filling and fracture fixation.

Biodegradable polydioxanone and poly(l/d)lactide implants: an experimental study on peri-implant tissue response.

Several implants for orbital wall fracture treatment are available at the present, but they have drawbacks: resorption, risk for migration and foreign body reaction. Alloplastic resorbable implants would be advantageous: no removal operation and no donor side morbidity. The purpose of this study was to evaluate the foreign body reaction, capsule formation and mechanical properties of two bioresorbable implants. PDS and SR-P(L/DL)LA mesh sheet (70/30) with solid frame (96/4) implants (SR-P(L/DL)LA 70,96) were placed into subcutaneous tissue of 24 rats. Immunohistochemistry was used to evaluate reactivity for Tn-C, alpha-actin, type I and III collagens and two mononuclear cells: T-cells and monocyte/ macrophage. GPC, DSC and SEM were performed. Student's t-test or nonparametric Kruskall-Wallis test were used for statistical analysis. Histology of peri-implant capsule exhibited an inner cell-rich zone and an outer connective tissue zone around both materials. Tn-C reactivity was high in the inner and alpha-actin in the outer zone. At the end of the study, the difference of type I collagen versus type III collagen reactivity in inner zone was statistically significant (P<0.0001) as was the difference of type I collagen versus type III collagen reactivity in outer zone (P<0.0001). Immunohistochemistry did not reveal any statistical differences of T-cell and monocyte/macrophage reactivity around PDS versus SR-P(L/DL)LA 70,96 implants, nor any differences as a function of time. PDS were deformed totally after 2 months. SR-P(L/DL)LA 70,96 implants were only slightly deformed during the follow up of 7 months. PDS degraded rapidly in SEM observation. Particles were detaching from surface. SEM observation revealed that polylactide implant was degrading from the surface and the inner porous core became visible. The degradation came visible at 7 months. There were cracks in perpendicular direction towards to the long axis of the filaments. M(w) of PDS decreased fast compared to the polylactide implant. Foreign body reaction was minimal to both materials but continued throughout the whole observation period. Mechanically PDS was poor, it looses its shape totally within 2 months. It cannot be recommended for orbital wall reconstruction. New mesh sheet-frame structure (SR-P(L/DL)LA 70,96) approved to be mechanically adequate for orbital wall reconstruction. It seems not to possess intrinsic memory and retains its shape. The resorption time is significantly longer compared to PDS and is comparable to other studied P(L/DL)LA copolymers. Thus, the new polylactide copolymer implant may support the orbital contents long enough to give way to bone growth over the wall defect.

A comparative study on four screw-plate locking systems in sheep: a clinical and radiological study.

Four mandibular screw-plate locking systems were studied in sheep. Three to four centimetres angular continuity resections of the mandible were performed and the defects bridged with pre-bent angular reconstruction plates fixed with four screws in the body part and three in the ramus. Each type was used four times. Clinical and radiological examinations were carried out 1 and 2 months later. All sheep were able to eat and ruminate normally throughout the postoperative period. Radiology revealed that 6/16 plates and 5/112 screws fractured during the follow-up period. In one type, no fracture occurred. Screw fracture was confined to just one reconstruction system. Six of 16 mandibles showed slight to moderate bone resorption under the plate. The results point to the internal shortcomings of the systems tested.

The 3DX multi image micro-CT device in clinical dental practice.

OBJECTIVES: To evaluate the usefulness of 3DX multi-image micro-CT device in clinical dental practice. METHODS: Images of 198 examinations performed with a 3DX device during a 6 month period in a private dental practice were evaluated retrospectively for the benefit of additional information compared with panoramic or intraoral radiographs. RESULTS: The main indication for the use of 3DX micro-CT was planning of dental implant placement in 49% of the examinations. Diagnosis or exclusion of dental infection or peri-implantitis represented 28% of the examinations and tooth, root or foreign body localization represented 13%. Temporomandibular joint (TMJ) imaging and cyst or tumour diagnosis represented 7.5% and 2.5% of the examinations, respectively. In implant planning and tooth, root or foreign body localization examinations, the required information was obtained in every case except three implant planning examinations, in which the exact measurements were hampered by artefacts caused by root fillings and retrograde fillings or metal posts. When compared with conventional radiography, additional radiographic information was obtained in 51% of the micro-CT examinations performed to confirm or exclude dental infection or peri-implantitis. Micro-CT also showed the bone structure of TMJs precisely. CONCLUSIONS: The 3DX micro-CT device visualizes bony anatomical structures precisely, which makes it a reliable tool for, for example, planning of implant treatment. The device is highly suitable for diagnosing dental infections. Dental restorations may cause disturbing artefacts and in 4.5% of the examinations the small imaging area resulted in re-examination.

Comparisons of nipple attachment and incisor growth among four species of voles (Microtus).

Patterns of nipple attachment and incisor growth were compared between four species of voles (Microtus). Offspring of two highly social species, prairie voles (M. ochrogaster) and pine voles (M. pinetorum), were shown to cling tightly to the nipples of their dams on Days 2, 6, and 10. This pattern contrasted to weak nipple attachment displayed by two less-social species, meadow voles (M. pennsylvanicus) and montane voles (M. montanus). Lengths of the upper (maxillary) and lower (mandibular) incisors of the four species were recorded throughout the first 10 days of age and in adults. Incisors of the pine and prairie voles typically erupted earlier and grew longer than those of the meadow or montane voles during the first few days of development. Incisors grew at a substantial rate in the latter two species, such that they equalled or surpassed the incisor lengths of the former two species as Day 10 and weaning approached. Patterns of incisor growth, in part, reflected those for nipple attachment, but do not appear to account substantially for differences in nipple attachment.

Lag-screw fixation of anterior mandibular fractures using biodegradable polylactide screws: a preliminary report.

PURPOSE: The purpose of this study was to evaluate the utility of biodegradable, self-reinforced poly-L-lactide screws (SR-PLLA) for lag-screw fixation of anterior mandibular fractures. PATIENTS AND METHODS: SR-PLLA lag-screws were used to stabilize anterior mandibular fractures in 11 patients. Maxillomandibular fixation was used to treat concomitant mandibular condyle fractures for 2 weeks in four patients and for 1 and 5 weeks in two patients. Clinical and radiologic follow-up lasted for 6 months in 36% of patients and for 1 year in 64%. RESULTS: Healing of all anterior fractures was uneventful, with no displacement or delay of bony union. No adverse reactions to the biodegradable screws were seen during follow-up. CONCLUSION: Biodegradable SR-PLLA screw fixation seems to be a new and promising way of treating anterior mandibular fractures.

Mixture of epsilon-caprolactone-lactide copolymer and tricalcium phosphate: a histological and immunohistochemical study of tissue reactions.

In cranio-maxillofacial surgery, bone transplantation is needed for treatment of bony defects. An autograft, allograft or biomaterial can be used. Autogenous bone grafts are considered to be the best materials available, but there are some disadvantages in their use including donorsite morbidity, need for a second operative site and limited graft supply. A search for new bone-graft materials therefore remains necessary. We prepared a mixture of tricalcium phosphate (TCP), which is a resorbable, non-toxic, osteoconductive ceramic material and epsilon-caprolactone-lactide copolymer P(epsilon-CL/DL-LA), a resorbable polymer, and placed it in the dermis and in mandibular bone defects in 13 rabbits. Follow-up times were two, three, seven, eight, 12, 15 and 18 weeks, tissue reactions were assessed, histologically and immunohistochemically. Times of resorption of the material from tissues were reported. We found that the mixture caused a mild inflammatory reaction when placed in bone and severe inflammation when placed in dermis. No highly fluorescent layer of tenascin or fibronectin was found surrounding the implant area. The mixture was excellent to handle and very easy to place into bone defects. The results are promising and have led us to continue development of the mixture.